Exchange 2010 Recover Public Folder database from replication database.

Following a hardware failure on Saturday, one of our public folder databases was dismounted, and was corrupt. I was able to run eseutil /p to get to a clean shutdown state, but I still couldn't mount and more research suggested that the logs for the database
were corrupted and unrecoverable (Log file: E:\logs\EXCH-PFDB1\E0100007E16.log
ERROR: Log damaged (unusable). Last Lgpos: (0x7e16,9,0). Error - 501.)
Everything i can find suggests that at the point where it makes the most sense just to restore the database. We do have another public folder database, which is set up to replicate all of its data with the one that went down, so this
should be relatively easy. However I want to make sure that I don't do it wrong and end up deleting my good database. What's the proper procedure for this? I can't seem to find anyone who has documented it.

Thank you Gulab.  This worked for me after a drive holding the Public Folder database logs failed. I first replaced the drive and recreated the folder structure.  I then ran a Symantec Backup Exec restore job which failed although some
log files did recover.  Unfortunately, I could still could not mount the Public Folder Database so I ran
Eseutil /mh which confirmed a dirty shutdown. I then emptied all files from the Log folder which appeared as a result of the restore job and ran Eseutil /p which was successful. 
I was then able to mount the Public Folder Database and I could see the contents of the Public Folders in Outlook and the Log folder started to populate from the DAG's second copy.

Similar Messages

  • Exchange 2010 - 2013 Public Folder Migration target database gets much bigger than source database

    Hi,
    i have a question about the pf migration from Exchange 2010 to Exchange 2013. The source database ist about 370 GB. The migration process is still running. At the moment the target database is already 491GB big. Is that a normal behaviour during the migration
    process.
    Thanks

    Hi,
    After you have finished the public folder migration process, you can compare the item count of public folders to make sure all public folders have been moved to Exchange 2013.
    You can check this by comparing the snapshots before and after the migration. You can refer to the "How do I know this worked?" section in the following article.
    Migrate Public Folders to Exchange 2013 From Previous Versions
    http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 - index public folder?

    We would like to achieve fast search thru public folders. If I have recieved correct informations, public folders are not indexed. Am I right or am I wrong?
    with best regards,
    bostjanc

    Hi,
    Do you want to do fast search in public folders in Outlook?
    If so, you can make use of Windows Desktop Search. What we need to know is that the search must be performed from within the Favorites section and Outlook should be in Cached mode.
    For more information about this, please see:
    Fast Searching in Public Folders
    http://blogs.msdn.com/b/heaths/archive/2006/02/16/533565.aspx?Redirected=true
    Please note that not ALL desktop search products index public folders. You can refer to the following blog for more details about performance problems caused by the desktop search engines.
    Are your clients using desktop search engines that index Exchange mailboxes or public folders?
    http://blogs.technet.com/b/exchange/archive/2005/08/22/409610.aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Replication of Public Folder data from Exchange Sp1 to Exchange SP2

    I have one Exch 2010 SP1 server and I am migrating to another Exch 2010 SP2 server.  I am looking to migrate the old public folder data to a newer public folder database on the SP2 server.  I have gone into Public Folder Management and added the
    new server as a replication partner in properties of the folder, under "Replicate content to these public folder databases".  After doing this, I don't see any replication occurring from the 2 servers.  I turned on diagnostic logging on
    both and I don't see any errors being created, just seem like nothing is happening. 
    What should I look for to troubleshoot this further?
    Thanks in advance.

    Hi JoeyC,
    From your description, I would like to clarify the following things for troubleshooting:
    1. Make sure that Mail flow is working between two servers.
    2. Please refer to the following article to confirm that the configuration is right.
    Configure Public Folder Replication
    http://technet.microsoft.com/en-us/library/bb691120(v=exchg.141).aspx
    What's more, here is an article about scripts to move public folders to a different database or server for your reference.
    Move Public Folder Content from One Public Folder Database to Another Public Folder Database
    http://technet.microsoft.com/en-us/library/bb331970(v=exchg.141).aspx
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • How do I export public folder data from inactive exchange server?

    I have migrated from SBS2003 (old) to SBS2008 (new)
    Used migration wizard / answer etc...  All went well, expect for the public folders; which failed.
    Question: How do I retrieve the public folder information from the OLD (inactive) server and import it to the NEW server?
    The OLD server has been removed from the domain. I have backups of the OLD server and its original hard drive; where the public store info is located.
    I tried PDDAVAdmin.exe; did not work for me.
    All help is greatly appreciated.
    Bill

    Hi Amit,
    I did as Zoltán said; searched the Internet for edb recovery tools and found a number of companies and Software Products which might help. I also considered your option as well but I have limited experience with building a recovery server and it sounds time consuming.
    Our office is small we have 10 users; we keep contact lists in the public folders. I want to restore the contact lists from the inactive source server to the active destination.
    I believe the process is called "rehoming" (from the web -- "In a Windows environment, rehoming is the process of moving public folders from one Exchange server to another. It involves the creation of a replica of the public folders on the target destination server, waiting for replication to complete, and then removing the public folders from the original source server.")
    Background:
    We have two servers FHHSERVER (the source, SBS2003) and FHHSERVER2 (the destination, SBS2008).
    I used the SBS2008 migration wizard. The important stuff in the exchange database transferred ok; all emails, schedules, tasks, notes, etc. Everything appeared to work; including public folders.
    Microsoft allows a 21 day grace period to complete the migration. I believed the migration was successful so on the 21st day, I followed Microsoft’s instructions and demoted the source server, removing it from the domain. 
    That’s when the trouble started….
    Unknown to me; the public folders remained on the old source server. I did not detect this problem since, during the 21 day migration grace period, the destination server was using the old source server to replicate public folders. As long as the old source server was active, eveyone could open public folder contact lists. After the source server was demoted, the destination server lost its replicate and now our users cannot access that information.
    Another problem is that the inactive server is n o longer licensed and the Exchange console cannot connect to its stores.
    It would seem to me that this problem should be relatively simple to fix. I need some way to open the public folder stores and export the contact lists. I’m not even sure where the public folder database is located on the hard drive.
    I hope this explains the situation in greater detail and that you may be able to offer some insight on how I might resolve this issue.
    Oh, I also tried using EXMerge but cannot seem to make it work either. <http://www.microsoft.com/downloads/details.aspx?familyid=429163EC-DCDF-47DC-96DA-1C12D67327D5&displaylang=en>
    Thanks!
    Bill

  • Issue in configuring Standby Database from Active database in 11g by RMAN

    POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.
    Edited by: 895188 on Dec 21, 2012 5:50 PM
    Edited by: 895188 on Dec 21, 2012 6:09 PM
    Edited by: 895188 on Dec 21, 2012 6:22 PM

    Hello;
    Script has to be run from auxiliary.
    Great details, but what I don't see is how you connect in RMAN.
    Example
    Start RMAN
    $ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
    Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: RECOVER2 (DBID=3806912436)
    connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
    Generally for active duplication I start the future standby on a pfile NOMOUNT.
    Auxiliary Instance Initialization Parameters Needed :
    DB_NAME
    CONTROL_FILES
    DB_BLOCK_SIZE
    ( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
    Then start RMAN and finally run a single line duplication command.
    $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
    RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
    mseberg

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Rman clone duplicate database from active database

    Hi All,
    I read document saying that rman can duplicate database from active database (prod) to a remote server, so long as you configure listener and tnsname.
    I am working toward it.
    I met a problem, which is when i bring up auxiliary database in nomount mode, the listener service of that auxiliary database is in BLOCKED status, and throw out ora-12528 error when I rman auxiliary sys/pass@clonedb. Isn't nomount mode the mode which auxiliary db is supposed to be in?
    (ora-12528: TNS:listener: all appropriate instances are blocking new connections)
    Thanks,
    milic

    You may have run into the same problem like I did recently:
    The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
    ORA-12528: TNS listener BLOCKED - trying to duplicate database
    Also for further problems:
    RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

  • Problem with duplicate target database from active database

    Hi all,
    i try duplicate database from active database
    - I have von target and auxiliary the same SYS Password
    - tnsping wogks in both directions fine
    - sqlplus to target and auxilairy works from both server
    - Metalink Solution 1056174.1 not help
    but in the Rman log become this error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on a1 channel at
    ORA-17629: Cannot connect to the remote database server
    ORA-17629: Cannot connect to the remote database server
    i do do :
    rman target sys/PASSWD@TARGET auxiliary sys/PASSWD
    run
    ALLOCATE CHANNEL a1 DEVICE TYPE DISK;
    ALLOCATE AUXILIARY CHANNEL d1 DEVICE TYPE DISK;
    duplicate target database to XXXXX
    from active database
    DB_FILE_NAME_CONVERT ('/XXXX/XXXX/XXXXXX','/XXXXX/XXXXXX/XXXXX/')
    spfile
    parameter_value_convert '/XXXX/','/XXXXX/'
    set log_file_name_convert '/XXXXX/','/XXXXX/'
    any Idea ?
    Best Regards

    Don't know if this will help, but I use the connect string below to connect, then run the command below. This is, of course, after the rman backup from the prod system has been copied to the flash_recovery_area of the aux database. All file paths are the same between the two systems. Works like a charm most nights. The local tnsnames file on the rman catalog server has working entries for @SDPROD, @rman and @SDSTB.
    [Connect String]
    rman TARGET SYS/xxxxx@SDPROD CATALOG rman/xxxxx@rman AUXILIARY SYS/xxxxx@SDSTB cmdfile D:\cladmin\Scripts\DuplicateSD.rcv LOG=D:\cladmin\Logs\DuplicateSD.f
    [Command file block]
    RUN{
    ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
    DUPLICATE TARGET DATABASE TO DATABASENAME
    NOFILENAMECHECK;
    Edited by: user522620 on Jun 27, 2011 6:36 PM

  • Duplicate database from active database in 11g?

    Does anyone know if it's possible to clone a database from stby by issuing RMAN duplicate database FROM ACTIVE DATABASE command in 11g?
    I know it's possible from primary to create stby.
    Thanks in advance

    You may have run into the same problem like I did recently:
    The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
    ORA-12528: TNS listener BLOCKED - trying to duplicate database
    Also for further problems:
    RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

  • Create Primary Database from DR database backup

    Hi Experts
    I got the requirement as follows:
    Build Production database using DR backup.
    When I am creating the Production database(Primary Database),I tried with the Duplicate command to create the primary database using DR backup.It is failing at the control file creation.
    Script used:
    I am executing this script on Primary server:
    Rman target sys/***@DR auxiliary /
    run
    allocate channel c1 device type disk sbt_tape;
    allocate channel c2 device type disk sbt_tape;
    NB_ora_client...,nb_ora_policy.....,
    dupilicate target database to PR;
    relaease channel c1;
    exit
    So can any body tell me is there any way to create the Primary Database from DR backup.
    Also please refer me to some documents in cloning the Primary database from production database.
    Thanks
    Veera

    Please note that "So can any body tell me is there any way to create the Primary Database from DR backup" this is with Duplicate command.
    I know how to do with Restore command.If some body refers to the Documentation using Restore database is also highly appreciated.
    Thanks in advance
    Veera

  • Public Folder Migration from Exchange 2007 to 2013

    Hi Guys,
    I have a general Exchange 07-13 migration question about migrating the PF's and System Folder Information, I read somewhere that the SystemFolder info doesn't come across, can someone shed some light on this for me please?
    Thanks,
    Ray

    Hi Ray,
    Free/Busy information is stored in system public folder. If you want to decommission the Exchange 2007 Server, you need to add the replicas to Exchange 2013 Server.
    What's more, if the users use Outlook 2003, they will rely on the Free/Busy folders. If the users are using Outlook 2007 or newer, then Outlook utilizes something called the Availability Service and no longer relies on the Free/Busy folder.
    Please refer to the following article to migrate public folders from Exchange 2007 to Exchange 2013.
    Migrate Public Folders to Exchange 2013 From Previous Versions
    http://technet.microsoft.com/en-us/library/jj150486.aspx
    Besides, here is a helpful thread for your reference.
    move/migrate Public Folder from Exchange 2007 to Exchange 2010
    http://social.technet.microsoft.com/Forums/exchange/en-US/44b29a93-0149-4734-8e19-6679ad7701ce/movemigrate-public-folder-from-exchange-2007-to-exchange-2010?forum=exchange2010
    Hope it helps.
    If there are any problems, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Public Folder Migration from Exchange 2007 to Exchage 2007

    Dear All,
    We are having 2 exchange 2007 server in single copy cluster (SCR) with 1 branch exchange server in parent domain and another Ex2007 single copy cluster in child domain. We have deployed exchange 2013 SP1 in parent domain with ex2007 co-existence. We have
    migrated all parent domain users mailbox from Ex2007 to Ex2013 SP1. All Ex2007 have public folders (FP). We want to decommission public folder server in parent domain and want to keep PF only in child domain (Ex2007) which should be accessible by all users.
    We are facing a strange issue. As told earlier, in parent domain for ex2007 we have 2 Server in single copy cluster + 1 branch. Both have 1 FP each. We want to remove branch 1st. We ran "MoveAllReplica.ps1" script on branch to move all replica
    to single copy cluster. Now it shows system folder with all 0 contents as shown below:
    [PS] C:\Windows\system32>Get-PublicFolderStatistics -Server branch
    Name                                     ItemCount              
    LastAccessTime
    Default                                  0                
    7/4/2014 10:58:36 AM
    exchangeV1                               0                
    7/4/2014 10:58:36 AM
    microsoft                                0                
    7/4/2014 10:58:36 AM
    schema-root                              0                
    7/4/2014 10:58:36 AM
    StoreEvents{90712A34-233D-4E65-B2FF-23DE 0                 7/4/2014 10:58:36 AM
    3C1F6820}
    Nntp Control Folder                      0                 10/8/2010 3:22:12
    AM
    Now the issue is, if we dismount the FP store on branch server, all users are unable to access their FP. they get error saying exchange is down for maintenance. If we see connection status then we saw that its trying to connect branch FP server. In all client
    setting we have removed branch server PF folder. What are we missing? Now our users who migrated to Ex2013 don't have any FP client setting also to look into. We tried reading lots of stuff but nothing seems to fix. Any advise is highly appreciated.
    Feel free to revert for any clarity!!
    Thanks in advance!!

    Dear All,
    We did little research and below are the results:
    1. After moving Mailbox from SingleCopyCluster(SCC) DB to Ex2013, the user while connecting to PF connects to branch exchange PFs (where is his client setting points to SCC PF). He can access PF on SCC as well
    2. If we discount branch PF DB, user gets error "Exchange server down for maintenance" while expanding PF. If we see connection status then it shows trying to connecting to Branch PF
    3. If we move the mailbox back to old Ex2007 SCC, users connects to right PF (only SCC) and can work without issue even if we discount branch PF DB
    As we have migrated MBX to Ex2013, there is no client setting to point migrated users to SCC PF.
    Hope it help all of you to suggest what might fix this..
    Thanks again..

  • Public Folder Migration from Exchange 2007 to 2013 fails RelinquishedWlmStall budget limitations

    I have been trying to migrate approx 50 public folders from Exchange 2007 to Exchange 2013 for several months.  I have followed every link I can find on how to do the migration properly.  It will stay in a queued state for hours until the MRS is
    restarted.  It will then start copying messages.  After reaching 28% I get RelinquishedWlmStall as Status Detail.  Running the Get-PublicFolderMigrationRequestStatistics -IncludeReport | fl command I get the following: (truncated)
    Status                           : InProgress
    FailureTimestamp                 :
    IsValid                          : True
    ValidationMessage                :
    OrganizationId                   :
    RequestGuid                      : ff4af794-f31e-4334-959f-7d6c4ccbe310
    RequestQueue                     : PublicFolders
    ExchangeGuid                     : b12c1f83-c4ae-46bb-a26a-0422d90800e4
    Identity                         : eddf983d-5827-4a2a-98ef-820321ebebd0\ff4af794-f31e-4334-959f-7d6c4ccbe310
    DiagnosticInfo                   :
    Report                           
                                       4/23/2015 8:49:37 AM [pionexxxx] Request processing started.
                                       4/23/2015 8:49:37 AM [pionexxxxx] Cleared sync state for request
                                       00000000-0000-0000-0000-000000000000 due to 'CleanupOrphanedMailbox'.
                                       4/23/2015 8:49:38 AM [pionexxxxxx] Stage: CreatingFolderHierarchy. Percent complete:
                                       10.
                                       4/23/2015 8:49:38 AM [pionexxxxxx] Initializing folder hierarchy from mailbox '': 50
                                       folders total.
                                       4/23/2015 8:49:38 AM [pionexxxx] Folder creation progress: 0 folders created in
                                       mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
                                       4/23/2015 8:49:38 AM [pionexxxxx] Warning: Failed to find or link recipient object
                                       'FF-D5-EF-1A-0A-95-D7-4B-89-02-A6-9E-DA-4D-23-4B' in active directory for mail
                                       enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes' with EntryId '00-00
                                       00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E
                                       98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-4C-00-00'. This folder can be linked
                                       manually by running Enable-MailPublicFolder cmdlet after the migration completes.
                                       4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
                                       'D8-46-09-BE-0B-3D-6E-4A-95-10-8F-C5-AA-0B-88-50' in active directory for mail
                                       enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Inventory'
                                       with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
                                       3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-12-6A-F5-00-00'. This folder
                                       can be linked manually by running Enable-MailPublicFolder cmdlet after the
                                       migration completes.
                                       4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
                                       'A6-12-DA-05-7D-21-DE-44-90-61-64-23-8C-62-41-F4' in active directory for mail
                                       enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Ulysses'
                                       with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
                                       3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-7C-00-00'. This folder
                                       can be linked manually by running Enable-MailPublicFolder cmdlet after the
                                       migration completes.
                                       4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
                                       '96-76-90-F1-A5-B7-DB-41-A7-A3-D6-8D-86-AE-45-A5' in active directory for mail
                                       enabled public folder 'Public Root/IPM_SUBTREE/CSR Schedule' with EntryId '00-00-00
                                       00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E-98
                                       03-B9-14-4F-B4-12-C1-00-00-00-0E-34-FF-00-00'. This folder can be linked manually
                                       by running Enable-MailPublicFolder cmdlet after the migration completes.
                                       4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
                                       '82-72-47-AA-D7-68-85-4C-91-92-41-45-8A-20-EA-6D' in active directory for mail
                                       enabled public folder 'Public Root/IPM_SUBTREE/DC 24 Hr Schedule' with EntryId '00-
                                       0-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-85-62-89-2A-52-C3-92-
                                       5-93-F8-5A-6F-56-5D-D1-D4-00-00-00-00-27-37-00-00'. This folder can be linked
                                       manually by running Enable-MailPublicFolder cmdlet after the migration completes.
                                       4/23/2015 8:49:41 AM [pionexxxx] Folder hierarchy initialized for mailbox
                                       'b12c1f83-c4ae-46bb-a26a-0422d90800e4': 46 folders created.
                                       4/23/2015 8:49:41 AM [pionexxxx] Stage: CreatingInitialSyncCheckpoint. Percent
                                       complete: 15.
                                       4/23/2015 8:49:41 AM [pionexxxx] Initial sync checkpoint progress: 0/50 folders
                                       processed. Currently processing mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
                                       4/23/2015 8:49:42 AM [pionexxxx] Initial sync checkpoint completed: 46 folders
                                       processed.
                                       4/23/2015 8:49:42 AM [pionexxxx] Stage: LoadingMessages. Percent complete: 20.
                                       4/23/2015 8:49:43 AM [pionexxxx] Messages have been enumerated successfully. 40607
                                       items loaded. Total size: 149 MB (156,253,810 bytes).
                                       4/23/2015 8:49:43 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 25.
                                       4/23/2015 8:49:43 AM [pionexxxx] Copy progress: 0/40607 messages, 0 B (0
                                       bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
                                       4/23/2015 9:04:37 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 28.
                                       4/23/2015 9:04:37 AM [pionexxxxx] Copy progress: 3660/40607 messages, 7.015 MB
                                       (7,355,409 bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
                                       4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
                                       unfavorable server health or budget limitations.
    ItemsTransferred                 : 3660
    PercentComplete                  : 25
    4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
    unfavorable server health or budget limitations.
    It never tries to restart.  Can anyone please help?  The server checks for health all come back ok.   I will be more than glad to include further information.  

    Hi,
    Basic on the error message, I notice that public folder migrate slow and display that “Relinquishing job because of large delays due to unfavorable server health or budget limitations” .
    If I misunderstand your concern, please do not hesitate to let me know.
    Since it is just slow and not failing, please do not stop the batch, it might connect to another server for sync.
    Meanwhile, please refer to below link so that get details about Exchange Online migration performance and best practices:
    https://technet.microsoft.com/library/dn592150(v=exchg.150).aspx
    If the issue persists, please collect the relevant migration report for further troubleshooting.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Q10 - Cannot sync Public Folder Calendar from Outlook (Exchange)

    Using Blackberry Link - latest update - It lets me browse and choose the public folder calendar but when i sync nothing happens and nothing appears on the phone in calendar. Contacts did update ok so there is connectivity.
    This is by usb cable.
    This is mandatory for our company to get this working as all Management Calendars are in Exchange Public Folders and always worked in other BB devices until now.
    Help!

    Hi stack888 and welcome to the BlackBerry Support Community Forums!
    Take a look at the following article to see if it helps you with your calendar on your BlackBerry Q10.
    KB34383 - Calendar appointments are not displayed on the BlackBerry 10 smartphone after performing s...
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Urgent..!!! printing is not working properly

    hi In WD for java iam using adobe forms for printing. There r 2 groups in my application in one group the user will enter the data and the user will press the button print.Then the 2nd group will visible in that there is a interactive form that also

  • Cover Flow Album Art won't change with Song Change

    When I play songs in Cover Flow mode (landscape), the album remains on the same album that I first played even though the song has advanced to another album. Is this behavior consistent with anyone else or is this only my iPhone that is acting this w

  • Textedit.. WHERE  did it go!?

    I can't find my Text EDIT program. Where did it go? Look in Applications-- Is this something that is easily deleted? How would I get it back? Thank you--

  • Custom Bookmark Format for Law Firm

    I have a client who is a transactional attorney and she needs to deliver a "closing cd" to all partied involved, which is basically a copy of all the documents for the current RE deal.  She showed me an examlpe of another law firms closing CD and ask

  • How to fix error: -1967362038, IAK_SHARED: (Hex 0x8ABC700A) Not found.

    Hello there, I have Labview 8.5 with DSC 8.5 installed on my computer. When i deploy the library containing shared variables from project explorer window or by using "Deploy Library.vi", i am getting deployment failed error whose snapshot is attached