Exchange 2010 recovery after a failed service pack install

Hi all,
I have a question on Exchange 2010 SP3 installation and hope someone can help.
If the installation for some reason failed, Microsoft's article said one can use "setup /m:recoverserver" to recover Exchange. My question is if Exchange 2010 is to be recovered on the SAME server, do I still need to reset the computer account
in AD first?
Thanks in advance.

If you do not recover the OS on the system, you needn't reset the computer account. I'll caution you, though, that if you intend to re-install Exchange onto the same server without reloading the OS, you are running the risk of having the same problem
happen again. For safety's sake, recover the OS and reset the computer account.
When we upgraded one of our servers to SP2, we had a failure in the install, and Exchange was effectively wiped from the system. We had to do just what you are asking about - and we reloaded the servers, from the ground up. It's been working
fine since then, including when we just upgraded from SP2 to SP3 (UR5, in case anyone wants to know).

Similar Messages

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 SP1 management console fail

Exchange 2010 SP1 management console fail on local exchange servers.
The following error occurred while attempting to connect to the specified Exchange server CAS123.domain.co.za
The attempt to connect to
http://cas123.domain.co.za/PowerShell using “kerberos” authentication failed: Connecting to remote server failed with following error message: The WS-Management service cannot process the request because IP address cas123.domain.co.za is invalid. For more
information, see the about_Remote_Troubleshooting Help topic.
However do note that the Exchange Management Shell also fails with the exact same error on both my CAS and Mailbox servers.
Though I am still able to open both tools via my backup server.
All ells works fine.
nslookup resolves the exchange servers as they should be. Frankly I am stumped as to the invalid IP address.
My exchange environment have been running problem free for years and this problem only occurred last week Thursday after some .NET updates.

Hi,
As per the information and details provided by you, the only thing that I can figure out is that: -
You receive an error: Exchange 2010 SP1 management console fail.
There are two methods to resolve this problem: -
Method 1: -
Close all MMC/EMC instances before proceeding.
Open the Registry editor (regedit) as the user you run the EMC under.
Go to
HKEY_CURRENT_USER\SOFTWARE\Microsoft\ExchangeServer\v14\AdminTools
Look for value, Node structure setting.
If it is there, back it up and then remove it.
Method 2: -
Close all MMC/EMC instance before proceeding.
Open powershell or powershell IDE as the user you run the EMC under and execute the following command:
Remove-Item Property- Path
HKCU:\Software\Microsoft\ExchangeServer\v14\AdminTools\ -Name NodeStructureSettings
Close Powershell
I hope this information will be helpful for you. Correct me if the information that I am having is wrong.
Thanks and regards
Ashish@V

Exchange 2010 sp3 rollup 7 fails

Exchange 2010 sp3 rollup 7 fails. This is ran at an elevated prompt and the UAC off. This server is also logged in as the domain Administrator account.
The server currently has rollup 4 SP3 installed. I'm wondering if I should uninstall it, reboot then try the Rollup 7 SP3 update?

Hi,
Can you please post the error?
At the same time please check these.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2010 SP3 RU 6 failed to install 1603

I just finished installing SP3 and trying to update to RU6 using the same admin account. It's failing and rolling back on both our servers. Event Viewer says:
Product: Microsoft Exchange Server - Update 'Update Rollup 6 for Exchange Server 2010 Service Pack 3 (KB2936871) 14.3.195.1' could not be installed. Error code 1603. Additional information is available in the log file c:\ExchangeSetupLogs\rollup.log.
I ran it again and logged the process. I can't seem to find a clue in the logs though. The log file is large so I can't paste it here but I've posted it here: https://onedrive.live.com/redir?resid=BA13E92AD70E1535!244&authkey=!AAdjDtNao_v0pL0&ithint=file%2c.log

Hello,
I check the setup logs and find the error code 2826. The may indicate a problem with MSI package. To find more specific cause, I recommend you enable MSI verbose logging. You can refer to the "Method 2:Set a Registry Value" section to enable MSI verbose
logging.
http://technet.microsoft.com/en-us/library/ff772434(v=exchg.80).aspx
Additional article for your reference.
http://blogs.msdn.com/b/astebner/archive/2005/08/01/446328.aspx
Cara Chen
TechNet Community Support

Problem with Exchange 2010 scripts after installing PowerShell 4.0

Hi
After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
exchange commands.
I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
$SearchContent=Read-Host "Write sentence to find"
Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
The property keyword isn't supported.
At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
+ Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 35E6C841
Using PowerShell 2.0 everything was ok.
How to solve this problem?
Tomasz
Kind Regards Tomasz

But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
Microsoft Exchange Server 2013 Service Pack 1
Microsoft Exchange Server 2010 SP3 with Update Rollup 5
Since
Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetPropsSpecific [7]
    Lid: 21921   StoreEc: 0x40380
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetReceiveFolderTable [104]
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetAllPerUserLtids [125]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 29793
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 25738
    Lid: 18570   StoreEc: 0xFFFFFA84
    Lid: 23370   StoreEc: 0xFFFFFA84
    Lid: 24302
    Lid: 32494   StoreEc: 0xFFFFFA84
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
   at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
   at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
   at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciated

Thanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetPropsSpecific [7]
    Lid: 21921   StoreEc: 0x40380
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetReceiveFolderTable [104]
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetAllPerUserLtids [125]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 29793
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 25738
    Lid: 18570   StoreEc: 0xFFFFFA84
    Lid: 23370   StoreEc: 0xFFFFFA84
    Lid: 24302
    Lid: 32494   StoreEc: 0xFFFFFA84
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
   at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
   at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
   at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

Exchange 2010 Management Console Initialization failed

Hi.
I have a server running 2008R2 as a domain controller with Exchange 2010 aswell.
This is a fairly new migration from a sbs2003 server, which went very well, in regards to exchange and AD.
The management console has worked since the migration, but suddenly today it stopped working, with the following message (the message is actually from the management shell, which isn't working either.):
[dc.domain.local] Connecting to remote server failed with the following error message : The WS-Management service cannot
process the request. The system load quota of 1000 requests per 2 seconds has been exceeded. Send future requests at
a slower rate or raise the system quota. The next request from this user will not be approved for at least 975630592 milliseconds.
For more information, see the about_Remote_Troubleshooting Help topic.
IIS is working, and listening on ports 80 and 443.
All services are running. I have tride to restart IIS, Windows Remote Management, informationstore and system attendant, but still no luck.
I hope you can help me figure this out.
Anders

I got it. I had to open IIS7 and create the Default Web Site, as I'd deleted it sometime ago.
Once I did that, everything worked great! Frustrating the things we do that come back and kick us in the face for hours, months later....

Exchange 2010 SP1 OWA login fail "The username or password you entered isn't correct. Try entering it again"

I upgrade my Exchange ORG from Exchange 2007 to Exchange 2010 on Windows Server 2008 R2 and worked fine. After install Exchange Server 2010 SP1 have a problem with
the Outlook Web App, I cannot login an get this error:
"The username or password you entered isn't correct. Try entering it again"
1. Create 1 test user and all work, included the Administrator User.
2. Reset users Password, verify clear check " User must change password at next logon"
2. I set the OWA Authentication to Domain\user name and
User name only, Doesn't work with both ways.
also i tried this solution, but nothing....
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/961dbdd0-554f-4a75-a374-7ada899a2807
Thank´s everybody por reply
Bryan

can you login using that user account using RDP to the Exchange serverRegards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I post here: http://www.enowconsulting.com/ese/blog.asp, follow my blog: http://autodiscover.wordpress.com ,
corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an answer

Display problem after update XP service pack 2

Can anyone advice me on the following :
I installed the XP service 2 (Xp pro) on my Satellite Pro 2100 and ever since I have at the right side of the display a black border that is not used of about 2 cm wide.
I've tried installing the latest nvidia geforce driver but that didn't solve the problem.
Before the update my resolution was put to 1024x768 32 bit colors, but now I can only put it to 969 x 768 ? Never heard of this resolution before but now my screen is no longer jumping from left to right.
Anyone any ideas?
Thanks already,
pLippo

Hi pLippo,
it seems the display driver is not compatible to the Service Pack 2. I understand your issue in this way, you have this problem after installing the Service Pack and not before.
In my opinion you could download and install the latest display driver from toshiba (https://eu.computers.toshiba-europe.com) under Support and Download page.
If this doesn't solve the problem you could wait until toshiba releases a new display driver or you uninstall the service pack 2.
Bye Hans

BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

AveConnect driver error after SQL Server service pack upgrade

I am currently testing aveConnect 3.0 (connection optimized) for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.
java.sql.SQLException: [Avenir][JDBC SQL Server Driver] Connection refused: connect
I also tested it with the older version of AveConnect (2.2) which we've been using until recently,and it returned the same error.
I am currently testing aveConnect 3.0 for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.If anyonecould provide any advice I would be very grateful,as this is pretty urgent.

Hi,
I just contacted the driver vendor (Atinav Inc).heard that aveconnect jdbc driver is now updated to work with latest SQL server fixes from microsoft.
FYI, aveconnect jdbc driver link http://www.atinav.com/products/aveconnect/aveconnect.htm
HTH,
-ashraff.

Orcale not connect after updating to service pack 6 from 5?

i have a machine running windows NT 4.0 as client connecting to oracle server, i just had to upgrade to service pack 6a, all other thing are ok thereafter but the i am not able to connect with oracle server running 8i ver. 8.1.6 and gives tns 12571 packet wiriter fialure error.
Anybody know any workaround? i did tried to install the sql again but of no use. Any help will be appriciated?
thanks

I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

Updating exchange 2010 accounts after provisioning

Hi Guys,
I am looking for the information on modifying exchange 2010 accounts information once we provisioined an exchange 2010 account.
For example, renaming the mailbox in exchange2010 when there is a change in the lastname like that. All of the "UPDATED" tasks
were given as "Required for completion". So, did not understand how the "UPDATED" tasks will work.
Will exchange 2010 support email attribute as multi-valued?
And how the move mailbox will work? Please provide some information.
Thanks for your help.

In exchange connector, all of the UPDATED tasks were given as required for completion. I believe required for completion will needed only for create user task not for all of the updated tasks.It depends on the requirement. Generally we make these task as Required for Completion only.
If I want to update exchange 2010 mailbox, I just need to update mail atribute in AD. Is that correct?Right now, I am not sure which attribute we have to modify for renaming mailbox and whether it is supported with OOTB connector or not.
If not then you need to extend the connector functionality but I have seen couple of threads on Google which talks about Renaming Mailbox in Exchange.
And
So, did not understand how the "UPDATED" tasks will work.SO I have given you link that how OIM triggers UPDATED task in any Process Defn.
Required for Completion means: Whether task should be completed for completing the process/operation or not. It is nothing to do with UPDATED Task trigger.

Exchange 2010 recovery after a failed service pack install

Similar Messages

Maybe you are looking for