Exchange 2010 resource mailbox automatically opening along with user email account
I've created a number of resource mailboxes for conference rooms, however one of them continuously opens in my Outlook profile. Deleting the profile doesn't seem to help, and it follows me around (it does it in my local Outlook 2010 profile, as well as my
Outlook 2013 profile in our Citrix environment).
Right-clicking the mailbox and selecting Close presents a box saying, "This group of folders is assicated with an email account. To remove the account, click the File Tab, and on the Info tab, click Account Settings. Select the e-mail account, and then
click Remove."
Unfortunately the profile is not configured to open this account, it's configured to only open my account (a domain admin). I've also gone into the settings of my account in Outlook and it is not set to open the resource mailbox as an additional mailbox
on the Advanced tab, so I'm not sure where it's getting this setting.
Since the issue seems to be unrelated to the actual Outlook profile, I looked at both mailbox objects within the Exchange Management Console and can find nothing in either object that would be instructing Outlook to open both mailboxes.
Any help is appreciated. Thanks.
Seems like it's auto-mapped to the account. Run Remove-mailboxpermissions against it, hopefully it will 'refresh' the settings. If it still doesn't work, check the msExchDelegateListLink for the resource mailbox.
More info for example here:
http://technet.microsoft.com/en-us/library/hh529943(v=exchg.141).aspx
Similar Messages
-
Exchange 2010 - Resource Mailbox won't send external notification email
Exchange 2010 with SP1. These mailboxes used to respond to outside booking requests, when we were running Exchange 2007. I've verified that -ProcessExternalMeetingMessages is set to $true. The mailbox responds to internal requests with an email.
All users are allowed to make "Resource In-Policy Requests".
I've tried booking from an email address that was setup as a Contact in Exchange - still no luck.
Any ideas?
Thanks.Martin
Agency
Could you share what settings did you use for SMTP connectors?
I have tried:
Authentication – Externally Secured
Permission Group – Exchange Servers
I can send emails via these connectors, but Room Mailbox still deletes requests from external sender.
Both organizations have Exch 2010 sp3 RU6, and AD forest 2008R2 level. -
Exchange 2010: Resource mailbox not sending conflict notification
Hi,
I configured meeting room mailbox on exchange 2010, and I configured it to not allow conflict reservation.
I tried to sent two meeting requests in same time and it accepted both.
please advice.I have the same issue as above "Resource mailbox not sending conflict notifications and ran the command as suggested but no luck.
Set-CalendarProcessing -Identity "Conf 212" -AutomateProcessing AutoAccept
Here are the mailroom settings:
AutomateProcessing : AutoAccept
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : False
AddOrganizerToSubject : False
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
AllBookInPolicy : False
RequestInPolicy : {}
AllRequestInPolicy : True
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : False
RemoveForwardedMeetingNotifications : False
Any help would be greatly appreciated.
Thai -
Exchange 2010 resource mailbox double booking issue..
Hi,
I have moved the meeting room mailbox from exchange 2003 to 2010:
set-Mailbox -Identity:<resourcename> -Type:Room
but after that, the meeting room can be double booking in the same time.
I have tried folllowing command, but it's failded.
Set-CalendarProcessing -Identity <mailbox identity> -AllowConflicts:$false
Thanks.Hi Martina,
I appreciate this is an old post, however if you do pick up on this could you please advise on your statement from the above:
"Even if the room sends a Decline, as it should when a conflict is found, you will still see that meeting request in your own Calendar."
This is the exact behaviour happening at a customer of ours at the moment. However they don't want the meeting requests to appear/remain in the Calendar of the person trying to book the meeting room.
Do you know of a way to stop this behaviour?
Do you know if the meeting request is only populated in the Calendar of the user who tries to book an appointment in the resource calendar or does this appear in other perspective attendees Calendars?
Many Thanks,
Matt.
MEllis -
Exchange 2010 resource mailbox delegate still getting attachments
I have a user that is set as a delegate on a resource mailbox, when an attachment is added to a meeting request the resource mailbox is deleting the attachment. However, the delegate of said resource mailbox is still receiving the attachment but my
user does not want the delegate to receive the attachment. Here are the resource settings:
AutomateProcessing : AutoAccept
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
DisableReminders : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy :
AllRequestOutOfPolicy : False
BookInPolicy :
AllBookInPolicy : True
RequestInPolicy :
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse : <DIV><FONT size=2 face=Tahoma></FONT></DI
V>
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : True
DefaultReminderTime : 15
RemoveForwardedMeetingNotifications : False
Is it possible to have the attachment deleted from this email that the delegate receives?Hi,
I would like to clarify the following thing:
Setting Delete Attachments means that the attachment information in a meeting request does not appear in the resource's calendar. But it would appear in the meeting email original content of Inbox.
I'm afraid there is no direct way to delete the attachments of meeting requests before they go into delegate's inbox. But there is a workaround, you can new rule on Outlook to delete all attachments that are sent to delegate. (Note: If you new this rule,
all attachments that are sent to the delegate will be deleted, not only meeting requests.)
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Exchange 2010 - Outlook can only open 8 other users' calendars
I have a company that I moved to Exchange 2010 from Exchange 2003 recently. The old Exchange 2003 server has been removed from the organization. They have 30 mailboxes on a single server. Everything has been running smoothly but I have just discovered an issue.
In this office there is one person who coordinates meetings, decides who uses what conference room for a given meeting, etc. She has full access to all of the other users' mailboxes. With Exchange 2003 she could access all of the other users' calendars simultaneously and would view them in overlay mode in Outlook 2003 and/or Outlook 2007.
With Exchange 2010 she can only view the first 8 calendars she clicks on. If she tries to open a 9th calendar Outlook responds with the error message "The set pf folders could not be opened."
I don't believe it to be a rights issue as she can open any 8 calendars upon first running Outlook. To access any others she has to uncheck one or more of the calendars previously selected, exit Outlook, restart Outlook and select different users calendars.
This is only happening with Exchange 2010 - I've tested it on my Exchange 2007 server and another client's Exchange 2003 server and one can open as many other users calendars as there are.
Is this a known limitation of Exchange 2010 or a new bug? Any workarounds?I'm betting that you have met the Exchange 2010 throttling policy......
Take a read through this post please, the section on throttling:
http://blogs.technet.com/b/rmilne/archive/2013/03/26/kicking-it-old-school-outlook-2003-partying-with-exchange-2010.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
HT5225 how do I get my icloud a/c onto my mailbox along with other email a/c's ?
How do i get move my icloud a/c onto my mailbox along with other email accounts ?
What Mac OS are you using? It should be setup automatically if using 10.7.2 or later after moving to iCloud.
-
Can't move Exchange 2003 mailbox to Exchange 2010 Resource forest (Linked Mailbox)
Problem Description:
Can’t move Exchange 2003 mailbox to Exchange 2010 resource forest
Error message:
Failed to reconnect to Active Directory server SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that you have used the correct credentials.
Source Environment Configuration:
Active Directory
FQDN: umfolozi.local
Domain name (pre-Windows 2000): UMFOLOZI
Domain Function Level: Windows Server 2003
Domain Controllers:
Hostname
OS
Operation Master
SRVUMVMDC01.umfolozi.local
Windows Server 2008 R2 Standard SP1
Schema Master, Domain Naming, RID, PDC
SRVUMVMDC01.umfolozi.local
Windows Server 2008 R2 Standard SP1
Infrastructure
Exchange
Version: Microsoft Exchange 2003 Standard SP2 Build 7638.2
Server Information:
Hostname
OS
TUSKUMFMAIL.umfolozi.local
Windows Server 2003 R2 SP2
DNS Zones
Zone Name
Zone Type
Domain Controllers
umfolozi.local
Active Directory-Integrated (Primary)
SRVUMVMDC01.umfolozi.local
SRVUMVMDC01.umfolozi.local
peermont.com
Secondary
SRVPGVMDC01.peermont.com
SRVPGVMDC02.peermont.com
Trusts
Domain Name
Trust Type
Transitive
Validated
peermont.com
Forest
Yes
Yes
Target Environment Configuration:
Active Directory
FQDN: peermont.com
Domain name (pre-Windows 2000): PG
Domain Functional Level: Windows Server 2008 R2
Domain Controllers:
Hostname
OS
Operation Master
SRVPGVMDC01.peermont.com
Windows Server 2008 R2 Std SP1
SRVPGVMDC02.peermont.com
Windows Server 2008 R2 Std SP1
Domain naming, RID, PDC, Infrastructure, Schema Master
Exchange
Resource Exchange Forest
Server Information:
Hostname
OS
Role
Version
Client Access Array
SRVPGVMEXCH01.peermont.com
Windows Server 2012 Std
HUB, CAS
Version 14.3 (Build 123.4)
exchange.peermont.com
SRVPGVMEXCH02.peermont.com
Windows Server 2012 Std
HUB, CAS
Version 14.3 (Build 123.4)
exchange.peermont.com
Hostname
OS
Role
Version
Database Availibility Group
SRVPGVMEXCH03.peermont.com
Windows Server 2012 Std
MBX
Version 14.3 (Build 123.4)
PeermontDAG
SRVPGVMEXCH04.peermont.com
Windows Server 2012 Std
MBX
Version 14.3 (Build 123.4)
PeermontDAG
DNS Zones
Zone Name
Zone Type
Domain Controllers
peermont.com
Active Directory-Integrated (Primary)
SRVPGVMDC01.peermont.com
SRVPGVMDC02.peermont.com
umfolozi.local
Secondary
SRVUMVMDC01.umfolozi.local
SRVUMVMDC01.umfolozi.local
Trusts
Domain Name
Trust Type
Transitive
Validated
umfolozi.local
Forest
Yes
Yes
Migration Process
Task
Description
Successful/Error
1
SYNC AD Domain account from source forest (umfolozi.local) to target forest (peermont.com) using BinaryTree SMART Directory Sync (ADMT can be used as alternative)
Successful
2
Create mailed enabled user
Successful
3
Run Prepare-MoveRepuest with –OverWriteLocalObject
Command Example:
.\Prepare-MoveRequest.ps1 -Identity [email protected] -RemoteForestDomainController SRVUMVMDC01.umfolozi.local
-RemoteForestCredential $RemoteCredentials -UseLocalObject -LocalForestDomainController SRVPGVMDC01.peermont.com -LocalForestCredential $LocalCredentials -OverWriteLocalObject
Successful
4
Submit mailbox request
Command Example:
New-MoveRequest -Identity "0fa7d17e-3637-4708-a51b-f14eaae17968" -BadItemLimit "50" -TargetDeliveryDomain
"internal.peermont.com" -TargetDatabase "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" -RemoteCredential (Get-Credential "umfolozi\svcmigration") -RemoteGlobalCatalog "SRVUMVMDC02.umfolozi.local" -RemoteLegacy:$True
Error
All the standard migration task works as expected until the mailbox migration move request is submitted. See move request verbose detail below:
[PS] C:\Windows\system32>New-MoveRequest -Identity "0fa7d17e-3637-4708-a51b-f14eaae17968" -BadItemLimit "50" -TargetDeli
veryDomain "internal.peermont.com" -TargetDatabase "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" -RemoteCredential (Get-Crede
ntial "umfolozi\svcmigration") -RemoteGlobalCatalog "SRVUMVMDC02.umfolozi.local" -RemoteLegacy:$True -Verbose
VERBOSE: [11:34:27.346 GMT] New-MoveRequest : Active Directory session settings for 'New-MoveRequest' are: View Entire
Forest: 'False', Default Scope: 'peermont.com', Configuration Domain Controller: 'SRVPGVMDC02.peermont.com', Preferred
Global Catalog: 'SRVPGVMDC02.peermont.com', Preferred Domain Controllers: '{ SRVPGVMDC02.peermont.com }'
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Runspace context: Executing user: peermont.com/Admin/Users/Admin
Accounts/Information Technology/SoarSoft/Johann Van Schalkwyk, Executing user organization: , Current organization: ,
RBAC-enabled: Enabled.
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Beginning processing &
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Instantiating handler with index 0 for cmdlet extension agent "Admin
Audit Log Agent".
WARNING: When an item can't be read from the source database or it can't be written to the destination database, it
will be considered corrupted. By specifying a non-zero BadItemLimit, you are requesting that Exchange not copy such
items to the destination mailbox. At move completion, these corrupted items won't be available in the destination
mailbox.
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Searching objects "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" of type
"MailboxDatabase" under the root "$null".
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Previous operation run on domain controller 'SRVPGVMDC02.peermont.com'.
VERBOSE: [11:34:27.393 GMT] New-MoveRequest : Current ScopeSet is: { Recipient Read Scope: {{, }}, Recipient Write
Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive Recipient Scope(s):
{}, Exclusive Configuration Scope(s): {} }
VERBOSE: [11:34:27.393 GMT] New-MoveRequest : Searching objects "0fa7d17e-3637-4708-a51b-f14eaae17968" of type "ADUser"
under the root "$null".
VERBOSE: [11:34:27.471 GMT] New-MoveRequest : Previous operation run on domain controller 'SRVPGVMDC02.peermont.com'.
VERBOSE: [11:34:27.471 GMT] New-MoveRequest : Processing object "$null".
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] No RequestJob messages found.
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] MDB c5d6ea95-07b3-4a52-9868-e41e808a76fe found to belong to Site:
peermont.com/Configuration/Sites/Peermont
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] MRSClient: attempting to connect to 'SRVPGVMEXCH02.peermont.com'
VERBOSE: [11:34:27.627 GMT] New-MoveRequest : [DEBUG] MRSClient: connected to 'SRVPGVMEXCH02.peermont.com', version
14.3.178.0 caps:07
VERBOSE: [11:34:27.627 GMT] New-MoveRequest : [DEBUG] Loading source mailbox info
VERBOSE: [11:34:28.844 GMT] New-MoveRequest : Failed to reconnect to Active Directory server
SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that you have used the correct credentials. --> A
local error occurred.
VERBOSE: [11:34:28.844 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
Failed to reconnect to Active Directory server SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that
you have used the correct credentials.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : F48FD74B,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
+ PSComputerName : srvpgvmexch02.peermont.com
VERBOSE: [11:34:28.859 GMT] New-MoveRequest : Ending processing &
Troubleshooting Performed
1. When submitting mailbox move request tried the following credential inputs:
1.1. DOMAIN\Username
1.2. FQDN\Username
1.3. userPrincipalName
2. Confirmed domain trust between source and target domain is in place and validated.
3. Confirmed name resolution in source and target domain is functioning as expected.
4. Confirmed network connectivity between source and target domain controllers as well as source and target exchange servers.
5. Tried to create new Linked Mailbox to account in source forest, can’t select Global Catologue via the wizard;
Tried to specify the credentials for the account forest and got the following error when tried to select Global Catalog from wizard:The error talk about the credential. Did you check the credential
Did you tried this command?
New-MoveRequest -Identity "Distinguished name of User in Target Forest" -RemoteLegacy -TargetDatabase "E2K10 Mailbox Database Name" -RemoteGlobalCatalog "FQDN of Source DC" -RemoteCredential $Remote -TargetDeliveryDomain "Target
domain name"
http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms
Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratikHi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users -
Mailbox Permissions Exchange 2010 forcing mailbox on outlook profile.
Hi,
We currently have a user that uses outlook 2010, along with exchange 2010. He currently uses two mail profiles on his outlook.
Profile 1 & Profile 2.
Profile 1 consists of his primary inbox. Profile 2 consists of a few shared mailboxes, along with 3 staff members.
When we add full permissions to the user to another 3 mailboxes 2010 makes this automatically appear for the user, casuing it to show on profile 1. Is there a way to stop this auto mapping and only add them to the second mailbox?
ThanksHi,
We can use the “-Automapping” switch in the following command:
http://technet.microsoft.com/en-us/library/hh529943(v=exchg.141).aspx
Thanks,
Simon Wu
TechNet Community Support -
Whenever I launch Firefox, multiple tabs also start to open along with the Mozilla Firefox Start Page, which is very irritating. How can I stop this to happen each time I launch the browser?
See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved
It is also possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
What happens to my "Dock"? I use that every time I open my computer(s), along with various mail accounts, and even the Widgets?. Thanks.
Using iCloud will not affect your dock or your widgets. If you upgrade to iCloud, your MobileMe mail account will be updated to an iCloud account, but that is all that will happen. What exactly is it that you are worried about.
-
Hi Team-
we are getting below alert in Exchange 2013 on UM server
a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
eventID 1647
The Microsoft Exchange Unified Messaging Call Router service rejected the call for the following reason: 15505;source="Exchange 2013 server ";reason="Couldn't find a valid Unified Messaging server to redirect the call." Microsoft.Exchange.UM.UMCore.CallRejectedException:
An incoming call with ID for user was rejected because a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
we have exchange 2010 and Exchange 2013.
Sender of the voice mail is on the Exchange 2013 and receiver of the voice mail is on Exchange 2010
Is this not supported scenario of Exchange 2013 UM server and Exchange 2010 mailbox server
ksrugiYou cannot and should not expect Exchange 2013 UM function for mailboxes housed in Exchange 2010. And the reverse is true as well. If you want Exchange 2013 UM to function for users, their mailboxes need to be in Exchange 2013. Exchange
2013 UM should be able to redirect calls to an Exchange 2010 UM server if it detected a call was destined for a mailbox being hosted by Exchange 2010, assuming the UM servers/roles/services are within the same UM Dial Plan. -
When I click a link on a webpage to send the webpage an e-mail, a blank e-mail automatically opens in Mac mail. I use Outlook. Where do I change the default to automatically open to an Outlook email (if such a thing exists?).
I have a MacBook Air, running OS X 10.8.5.
ThanksMail>Preferences>General>Default email Reader:
-
Export userdata along with user mapping
Hi,
Can any body explain how to export user data along with user mapping.
Thanks in advance.
Regards,
Ashok.hi,
Any input or suggestion of the above request.
My request is,i want to export user data along with user mapping and i am using EP 6.0.
can any body give the details of exporting data with user mapping.
Thanks in Advance.
Regards,
Ravi.M
Maybe you are looking for
-
Macbook Pro will not boot from internal drive
I have a macbook pro model indentifier: macbookpro 7,1. The system would not boot what I have tried is first running apple diagnostics and all test fine, I tried booting from a snow leopard cd to re-install and it would not boot from the cd, however
-
Transferring from old mac to new using ipod
I was able to get all of my songs from my old macbook onto my ipod (about 3000 songs), but when I try to put all of the songs onto my new macbook, I only end up w/about 1850 songs. Authorized the new computer. Can anyone help me?
-
Can't relax - my camera and printer don't work!
The Snow leopard web page tells me to "Relax. Your camera, printer and mouse work too". Well, my Samsung ML-1210 didn't work but I was able to get it going after install some opensource printer driver (Ghostscript)) And now iPhoto won't import images
-
Help connecting to schools VPN
Hi there, I am trying to connect to my schools vpn. I have tried tried the Cisco AnyConnect client, network-manager-openconnect and just openconnect. Running openconnect I do: openconnect -s /etc/vpnc/vpnc-script vpn.au.dk --user=username --authgroup
-
How do i get my contacts from my iphone to my macbook
i cant get my contacts from my iphone to my macbook how do i do that