Exchange 2010: Resource mailbox not sending conflict notification

Hi,
I configured meeting room mailbox on exchange 2010, and I configured it to not allow conflict reservation.
I tried to sent two meeting requests in same time and it accepted both.
please advice.

I have the same issue as above "Resource mailbox not sending conflict notifications and ran the command as suggested but no luck.
Set-CalendarProcessing -Identity "Conf 212" -AutomateProcessing AutoAccept
Here are the mailroom settings:
AutomateProcessing : AutoAccept
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : False
AddOrganizerToSubject : False
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
AllBookInPolicy : False
RequestInPolicy : {}
AllRequestInPolicy : True
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : False
RemoveForwardedMeetingNotifications : False
Any help would be greatly appreciated.
Thai

Similar Messages

Resource Mailbox Not Declining Conflicting Appointments

Recently upgraded from Exchange 2003 to Exchange 2010.
All of my resource mailboxes are allowing conflicting meeting requests to be scheduled, even though in the window when you are scheduling it, it says "conflicts with another appointment".
Resource attendants are enabled, and the box for "allow conflicting meeting requests" is NOT checked.
Maximum conflict instances is 0, and conflict percentage allowed is 0.
And I am not scheduling any recurring meetings. If there is a meeting already schedule from 1-2 (for example) and I go on the calendar and schedule another meeting in the same resource from 12:30-2:00 it lets me schedule it, never declines it or anything.
I have looked around a bunch and can't seem to figure out what is wrong, so any assistance would be greatly appreciated.

Still banging my head against this. Here are the settings for a mailbox that doesn't work (k2) and a mailbox that does (strategysummit). The k2 mailbox is a mailbox that was created in exchange 2003 and then migrated to a resource mailbox during
the migration. Strategysummit is a new room mailbox created after the migration and works fine. All my room mailboxes created in 2003 are having this problem.
RunspaceId                          : aa671879-75ca-4961-a103-4dcd35254689
AutomateProcessing                  : AutoAccept
AllowConflicts                      : False
BookingWindowInDays                 : 180
MaximumDurationInMinutes            : 1440
AllowRecurringMeetings              : True
EnforceSchedulingHorizon            : True
ScheduleOnlyDuringWorkHours         : False
ConflictPercentageAllowed           : 0
MaximumConflictInstances            : 0
ForwardRequestsToDelegates          : True
DeleteAttachments                   : True
DeleteComments                      : True
RemovePrivateProperty               : True
DeleteSubject                       : True
AddOrganizerToSubject               : True
DeleteNonCalendarItems              : True
TentativePendingApproval            : True
EnableResponseDetails               : True
OrganizerInfo                       : True
ResourceDelegates                   : {}
RequestOutOfPolicy                  : {}
AllRequestOutOfPolicy               : False
BookInPolicy                        : {}
AllBookInPolicy                     : True
RequestInPolicy                     : {}
AllRequestInPolicy                  : False
AddAdditionalResponse               : False
AdditionalResponse                  :
RemoveOldMeetingMessages            : True
AddNewRequestsTentatively           : False
ProcessExternalMeetingMessages      : True
RemoveForwardedMeetingNotifications : False
MailboxOwnerId                      : offwire.com/Offwire Users/Exchange/Exchange Resources/Resource - K2
Identity                            : offwire.com/Offwire Users/Exchange/Exchange Resources/Resource - K2
IsValid                             : True
RunspaceId                          : aa671879-75ca-4961-a103-4dcd35254689
AutomateProcessing                  : AutoAccept
AllowConflicts                      : False
BookingWindowInDays                 : 180
MaximumDurationInMinutes            : 1440
AllowRecurringMeetings              : True
EnforceSchedulingHorizon            : True
ScheduleOnlyDuringWorkHours         : False
ConflictPercentageAllowed           : 0
MaximumConflictInstances            : 0
ForwardRequestsToDelegates          : True
DeleteAttachments                   : True
DeleteComments                      : True
RemovePrivateProperty               : True
DeleteSubject                       : True
AddOrganizerToSubject               : True
DeleteNonCalendarItems              : True
TentativePendingApproval            : True
EnableResponseDetails               : True
OrganizerInfo                       : True
ResourceDelegates                   : {}
RequestOutOfPolicy                  : {}
AllRequestOutOfPolicy               : False
BookInPolicy                        : {}
AllBookInPolicy                     : True
RequestInPolicy                     : {}
AllRequestInPolicy                  : False
AddAdditionalResponse               : False
AdditionalResponse                  :
RemoveOldMeetingMessages            : True
AddNewRequestsTentatively           : True
ProcessExternalMeetingMessages      : False
RemoveForwardedMeetingNotifications : False
MailboxOwnerId                      : offwire.com/Offwire Users/Exchange/Exchange Resources/Strategy Summit
Identity                            : offwire.com/Offwire Users/Exchange/Exchange Resources/Strategy Summit
IsValid                             : True

Exchange 2010 - Resource Mailbox won't send external notification email

Exchange 2010 with SP1. These mailboxes used to respond to outside booking requests, when we were running Exchange 2007. I've verified that -ProcessExternalMeetingMessages is set to $true. The mailbox responds to internal requests with an email.
All users are allowed to make "Resource In-Policy Requests".
I've tried booking from an email address that was setup as a Contact in Exchange - still no luck.
Any ideas?
Thanks.

Martin
Agency
Could you share what settings did you use for SMTP connectors?
I have tried:
Authentication – Externally Secured
Permission Group – Exchange Servers
I can send emails via these connectors, but Room Mailbox still deletes requests from external sender.
Both organizations have Exch 2010 sp3 RU6, and AD forest 2008R2 level.

Exchange 2010 resource mailbox double booking issue..

Hi,
I have moved the meeting room mailbox from exchange 2003 to 2010:
set-Mailbox -Identity:<resourcename> -Type:Room
but after that, the meeting room can be double booking in the same time.
I have tried folllowing command, but it's failded.
Set-CalendarProcessing -Identity <mailbox identity> -AllowConflicts:$false
Thanks.

Hi Martina,
I appreciate this is an old post, however if you do pick up on this could you please advise on your statement from the above:
"Even if the room sends a Decline, as it should when a conflict is found, you will still see that meeting request in your own Calendar."
This is the exact behaviour happening at a customer of ours at the moment. However they don't want the meeting requests to appear/remain in the Calendar of the person trying to book the meeting room.
Do you know of a way to stop this behaviour?
Do you know if the meeting request is only populated in the Calendar of the user who tries to book an appointment in the resource calendar or does this appear in other perspective attendees Calendars?
Many Thanks,
Matt.
MEllis

Exchange 2010 resource mailbox automatically opening along with user email account

I've created a number of resource mailboxes for conference rooms, however one of them continuously opens in my Outlook profile. Deleting the profile doesn't seem to help, and it follows me around (it does it in my local Outlook 2010 profile, as well as my
Outlook 2013 profile in our Citrix environment).
Right-clicking the mailbox and selecting Close presents a box saying, "This group of folders is assicated with an email account. To remove the account, click the File Tab, and on the Info tab, click Account Settings. Select the e-mail account, and then
click Remove."
Unfortunately the profile is not configured to open this account, it's configured to only open my account (a domain admin). I've also gone into the settings of my account in Outlook and it is not set to open the resource mailbox as an additional mailbox
on the Advanced tab, so I'm not sure where it's getting this setting.
Since the issue seems to be unrelated to the actual Outlook profile, I looked at both mailbox objects within the Exchange Management Console and can find nothing in either object that would be instructing Outlook to open both mailboxes.
Any help is appreciated. Thanks.

Seems like it's auto-mapped to the account. Run Remove-mailboxpermissions against it, hopefully it will 'refresh' the settings. If it still doesn't work, check the msExchDelegateListLink for the resource mailbox.
More info for example here:
http://technet.microsoft.com/en-us/library/hh529943(v=exchg.141).aspx

Exchange 2010 resource mailbox delegate still getting attachments

I have a user that is set as a delegate on a resource mailbox, when an attachment is added to a meeting request the resource mailbox is deleting the attachment. However, the delegate of said resource mailbox is still receiving the attachment but my
user does not want the delegate to receive the attachment. Here are the resource settings:
AutomateProcessing : AutoAccept
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
DisableReminders : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy :
AllRequestOutOfPolicy : False
BookInPolicy :
AllBookInPolicy : True
RequestInPolicy :
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse : <DIV><FONT size=2 face=Tahoma></FONT></DI
V>
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : True
DefaultReminderTime : 15
RemoveForwardedMeetingNotifications : False
Is it possible to have the attachment deleted from this email that the delegate receives?

Hi,
I would like to clarify the following thing:
Setting Delete Attachments means that the attachment information in a meeting request does not appear in the resource's calendar. But it would appear in the meeting email original content of Inbox.
I'm afraid there is no direct way to delete the attachments of meeting requests before they go into delegate's inbox. But there is a workaround, you can new rule on Outlook to delete all attachments that are sent to delegate. (Note: If you new this rule,
all attachments that are sent to the delegate will be deleted, not only meeting requests.)
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange server 2010 - Resource mailbox not showing up in GAL

i created a new resource user and mailbox and can not see it in the GAL when I go to set a new meeting. If I go to the Outlook Web Acces I can see the
new resource. How can I get the GAL to see the new resource so all staff can start signing up for it
         The
GAL (Global Address List) is essentially a list of all email recipients in your organization.  It
does not contain other address lists.  It could
however contain distribution groups.
Address lists are like the GAL,
but more specific.  For example: “All Rooms”.  This
would show all room mailboxes.  All room mailboxes
would also appear in the GAL.
You
don’t email an address list.  These are for
recipient browsing/clicking only.  You may be
confusing Address Lists with Distribution groups.
Outlook
running in cached mode doesn’t connect to Exchange for either of these two types of address lists. Instead
it uses what’s called an OAB (Offline Address Book) which is generated by a mailbox server once a day and distributed by a client access server or via system Public Folder.
Anytime
there is an issue with an address list, I check using Outlook in online mode or through OWA; since neither of these methods use an offline copy of data.  If
you find OWA works and Outlook cached mode doesn’t; it may be due to OAB generation issues or delays.

The default update interval
of OAB is 12 hours. You need to need until then to get it displayed in the GAL for Outlook Cached Mode...if you not you can go Outlook online Mode
Please refer to 13 in this
link:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/0752c1fc-1a6b-4c42-a10a-a280db2f59b8#13
If the OAB still can’t
be updated after 12 hours please enable the diagnostic logging for MSexchangeSA>OAL Generator to maximum.
http://support.microsoft.com/kb/821910/en-us
Exchange Queries

Can't move Exchange 2003 mailbox to Exchange 2010 Resource forest (Linked Mailbox)

Problem Description:
Can’t move Exchange 2003 mailbox to Exchange 2010 resource forest
Error message:
Failed to reconnect to Active Directory server SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that you have used the correct credentials.
Source Environment Configuration:
Active Directory
FQDN: umfolozi.local
Domain name (pre-Windows 2000): UMFOLOZI
Domain Function Level: Windows Server 2003
Domain Controllers:
Hostname
OS
Operation Master
SRVUMVMDC01.umfolozi.local
Windows Server 2008 R2 Standard SP1
Schema Master, Domain Naming, RID, PDC
SRVUMVMDC01.umfolozi.local
Windows Server 2008 R2 Standard SP1
Infrastructure
Exchange
Version: Microsoft Exchange 2003 Standard SP2 Build 7638.2
Server Information:
Hostname
OS
TUSKUMFMAIL.umfolozi.local
Windows Server 2003 R2 SP2
DNS Zones
Zone Name
Zone Type
Domain Controllers
umfolozi.local
Active Directory-Integrated (Primary)
SRVUMVMDC01.umfolozi.local
SRVUMVMDC01.umfolozi.local
peermont.com
Secondary
SRVPGVMDC01.peermont.com
SRVPGVMDC02.peermont.com
Trusts
Domain Name
Trust Type
Transitive
Validated
peermont.com
Forest
Yes
Yes
Target Environment Configuration:
Active Directory
FQDN: peermont.com
Domain name (pre-Windows 2000): PG
Domain Functional Level: Windows Server 2008 R2
Domain Controllers:
Hostname
OS
Operation Master
SRVPGVMDC01.peermont.com
Windows Server 2008 R2 Std SP1
SRVPGVMDC02.peermont.com
Windows Server 2008 R2 Std SP1
Domain naming, RID, PDC, Infrastructure, Schema Master
Exchange
Resource Exchange Forest
Server Information:
Hostname
OS
Role
Version
Client Access Array
SRVPGVMEXCH01.peermont.com
Windows Server 2012 Std
HUB, CAS
Version 14.3 (Build 123.4)
exchange.peermont.com
SRVPGVMEXCH02.peermont.com
Windows Server 2012 Std
HUB, CAS
Version 14.3 (Build 123.4)
exchange.peermont.com
Hostname
OS
Role
Version
Database Availibility Group
SRVPGVMEXCH03.peermont.com
Windows Server 2012 Std
MBX
Version 14.3 (Build 123.4)
PeermontDAG
SRVPGVMEXCH04.peermont.com
Windows Server 2012 Std
MBX
Version 14.3 (Build 123.4)
PeermontDAG
DNS Zones
Zone Name
Zone Type
Domain Controllers
peermont.com
Active Directory-Integrated (Primary)
SRVPGVMDC01.peermont.com
SRVPGVMDC02.peermont.com
umfolozi.local
Secondary
SRVUMVMDC01.umfolozi.local
SRVUMVMDC01.umfolozi.local
Trusts
Domain Name
Trust Type
Transitive
Validated
umfolozi.local
Forest
Yes
Yes
Migration Process
Task
Description
Successful/Error
1
SYNC AD Domain account from source forest (umfolozi.local) to target forest (peermont.com) using BinaryTree SMART Directory Sync (ADMT can be used as alternative)
Successful
2
Create mailed enabled user
Successful
3
Run Prepare-MoveRepuest with –OverWriteLocalObject
Command Example:
.\Prepare-MoveRequest.ps1 -Identity [email protected] -RemoteForestDomainController SRVUMVMDC01.umfolozi.local
-RemoteForestCredential $RemoteCredentials -UseLocalObject -LocalForestDomainController SRVPGVMDC01.peermont.com -LocalForestCredential $LocalCredentials -OverWriteLocalObject
Successful
4
Submit mailbox request
Command Example:
New-MoveRequest -Identity "0fa7d17e-3637-4708-a51b-f14eaae17968" -BadItemLimit "50" -TargetDeliveryDomain
"internal.peermont.com" -TargetDatabase "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" -RemoteCredential (Get-Credential "umfolozi\svcmigration") -RemoteGlobalCatalog "SRVUMVMDC02.umfolozi.local" -RemoteLegacy:$True
Error
All the standard migration task works as expected until the mailbox migration move request is submitted. See move request verbose detail below:
[PS] C:\Windows\system32>New-MoveRequest -Identity "0fa7d17e-3637-4708-a51b-f14eaae17968" -BadItemLimit "50" -TargetDeli
veryDomain "internal.peermont.com" -TargetDatabase "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" -RemoteCredential (Get-Crede
ntial "umfolozi\svcmigration") -RemoteGlobalCatalog "SRVUMVMDC02.umfolozi.local" -RemoteLegacy:$True -Verbose
VERBOSE: [11:34:27.346 GMT] New-MoveRequest : Active Directory session settings for 'New-MoveRequest' are: View Entire
Forest: 'False', Default Scope: 'peermont.com', Configuration Domain Controller: 'SRVPGVMDC02.peermont.com', Preferred
Global Catalog: 'SRVPGVMDC02.peermont.com', Preferred Domain Controllers: '{ SRVPGVMDC02.peermont.com }'
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Runspace context: Executing user: peermont.com/Admin/Users/Admin
Accounts/Information Technology/SoarSoft/Johann Van Schalkwyk, Executing user organization: , Current organization: ,
RBAC-enabled: Enabled.
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Beginning processing &
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Instantiating handler with index 0 for cmdlet extension agent "Admin
Audit Log Agent".
WARNING: When an item can't be read from the source database or it can't be written to the destination database, it
will be considered corrupted. By specifying a non-zero BadItemLimit, you are requesting that Exchange not copy such
items to the destination mailbox. At move completion, these corrupted items won't be available in the destination
mailbox.
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Searching objects "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" of type
"MailboxDatabase" under the root "$null".
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Previous operation run on domain controller 'SRVPGVMDC02.peermont.com'.
VERBOSE: [11:34:27.393 GMT] New-MoveRequest : Current ScopeSet is: { Recipient Read Scope: {{, }}, Recipient Write
Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive Recipient Scope(s):
{}, Exclusive Configuration Scope(s): {} }
VERBOSE: [11:34:27.393 GMT] New-MoveRequest : Searching objects "0fa7d17e-3637-4708-a51b-f14eaae17968" of type "ADUser"
under the root "$null".
VERBOSE: [11:34:27.471 GMT] New-MoveRequest : Previous operation run on domain controller 'SRVPGVMDC02.peermont.com'.
VERBOSE: [11:34:27.471 GMT] New-MoveRequest : Processing object "$null".
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] No RequestJob messages found.
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] MDB c5d6ea95-07b3-4a52-9868-e41e808a76fe found to belong to Site:
peermont.com/Configuration/Sites/Peermont
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] MRSClient: attempting to connect to 'SRVPGVMEXCH02.peermont.com'
VERBOSE: [11:34:27.627 GMT] New-MoveRequest : [DEBUG] MRSClient: connected to 'SRVPGVMEXCH02.peermont.com', version
14.3.178.0 caps:07
VERBOSE: [11:34:27.627 GMT] New-MoveRequest : [DEBUG] Loading source mailbox info
VERBOSE: [11:34:28.844 GMT] New-MoveRequest : Failed to reconnect to Active Directory server
SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that you have used the correct credentials. --> A
local error occurred.
VERBOSE: [11:34:28.844 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
Failed to reconnect to Active Directory server SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that
you have used the correct credentials.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : F48FD74B,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
+ PSComputerName : srvpgvmexch02.peermont.com
VERBOSE: [11:34:28.859 GMT] New-MoveRequest : Ending processing &
Troubleshooting Performed
1. When submitting mailbox move request tried the following credential inputs:
1.1. DOMAIN\Username
1.2. FQDN\Username
1.3. userPrincipalName
2. Confirmed domain trust between source and target domain is in place and validated.
3. Confirmed name resolution in source and target domain is functioning as expected.
4. Confirmed network connectivity between source and target domain controllers as well as source and target exchange servers.
5. Tried to create new Linked Mailbox to account in source forest, can’t select Global Catologue via the wizard;
Tried to specify the credentials for the account forest and got the following error when tried to select Global Catalog from wizard:

The error talk about the credential. Did you check the credential
Did you tried this command?
New-MoveRequest -Identity "Distinguished name of User in Target Forest" -RemoteLegacy -TargetDatabase "E2K10 Mailbox Database Name" -RemoteGlobalCatalog "FQDN of Source DC" -RemoteCredential $Remote -TargetDeliveryDomain "Target
domain name"
http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2010 public folder not showing on exchange 20003 mailbox

Hi,
I have public folder on exchange 2003 and separate public folder on exchange 2010. On exchange 2010 user mailbox, I can see both 2003 and 2010 public folders. On exchange 2003 user mailbox, I can only see 2003 public folders. It is not the permission issue
as I have given the user "owner" right and see not able 2010 public folder inless i move 2003 user mailbox to 2010 exchange.
Appreciate if anyone could help me if to point me to directions or any hotfix I can run?
Thank you very much.
Pwint

Are you using OWA or Outlook to view the public folders?
If you're using OWA, the reason you can't see the folders is that OWA in Exchange 2003 uses WebDAV, which is no longer present in Exchange 2010.
If you're using Outlook, you'll need to use the troubleshooting logs to determine the cause of the problems.
It could be related to Outlook trying to connect directly to 2010 mailbox server instead of CAS. Because normally the mailbox server is installed without the CAS role, it does not allow a direct Outlook connection. Or it could be something else,
like authentication.

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

AIM app not sending push notifications

My AIM app is not sending push notifications. It was working just fine yesterday morning and when I signed onto the wifi at work I noticed it wasn't sending me notification while talking to a friend.
I have IOS 6 (because I don't like IOS 7 and don't feel like updating to a system that I dislike).
I have uninstalled the app and reinstalled (so yes, the app is up to date).
I've checked push notifications in both the app itself and my system settings.
I've restarted my ipod touch several times.
I've signed off of my wifi connection and back on.
I've basically done everytrhing I can think of to get it to work again and yet it is not.
This is so frustrating because I miss messages while on other apps or just sitting around.

I have had this problem on my personal wifi connection, work wifi and my friend's wifi connection and also my college's wifi.
I have no other connections to try it on. Plus, I want it to work on *my* connection. Not someone else's.
Message was edited by: tangledpuppet

Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working

Below is my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
also select mailboxes in their Outlook that were NOT auto mapped.
With that said, here is how I fixed them all.
Remove the permissions using the Exchange Console. Don't forget Send As
Wait about 15 minutes. The mailbox should disappear from the users Outlook
Open an Exchange PowerShell window and run the following command:
.\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
Have the user add the mailbox to their Outlook using the manual process.
All is well....
If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
specify automap $false.
The idea here is to grant the user access without auto mapping.

Removing mailbox server from Exchange 2010 DAG - Node not fully cleaned up

Hi,
We are in the process of decommissioning some old Exchange 2010 servers. I have just attempted to remove one of our mailbox servers and have received a number of errors, related to its removal from the DAG.
I have already removed the Public Folder replicas and all mailbox database copies. I then tried to evict the server from the DAG and received the following warning:
I then ran the command that was recommended, from another server and in an administrative command prompt:
I have looked in this log on both the server I ran the command on, a CAS server, and the mailbox server itself and can see no evidence of this error 2 that is listed here.
If I run the Powershell command to look at the DAG I cannot see it there any more. I am assuming that this error message might only be an issue if I was planning on re-using this server somewhere else in Exchange or perhaps adding this server to another
DAG. But I just want to decommission it.
Can anyone put my mind at rest as to whether this is a genuine concern or not. If not my next step is to uninstall Exchange 2010 from this server and turn it off.

Hi Belinda,
I get the following:
[PS] C:\Windows\system32>Get-DatabaseAvailabilityGroup
Name Member Servers
Operational Servers
DAG01 {WSR-EX-01, WSR-EX-101, WSR21}
It doesn't look like that server is part of the DAG any more as far as I can see. I just can't explain that error message reported from the cluster command. As far as I can see the server is isolated. I already removed its database copies as a pre-requisite
before removing it from the DAG as per this guide:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_27039933.html
I found a nice little script that gave reports on your Public Folder configuration and it highlighted that some of our folders were not being replicated properly across our mailbox servers. This helped me in removing these services from the server.
It is currently doing nothing at this time as far as Exchange Services are concerned.

Outlook 2013/ Exchange 2010 User Mailbox reached Limit and OWA is not reachable

Hello Folks,I have a strange Outlook/ Exchange problem with one of our Users, interestingly it’s the Boss of our company….The Background:- We have 2 Domains @company-1 or @company-2- We have 1 Exchange 2010 Server Version 14.03.0224.002- Till March of this year our Emails where hosted externally, we used to download the Emails every 2 minutes from POP3 Mailboxes into Exchange- We have 18 Users- So every User had a User account on our Exchange and a Mailbox externally- Now we host our Emails our self via MX and DNS Records(mail.company.cc)- The User kept their Exchange accounts, OWA is now working too So far all works well on my little Server farm.The Catch:Usually our users have only one Email address either @company-1 or @company-2 Except our Boss and one other User, they have an Email address in both Domains They have addresses one...
This topic first appeared in the Spiceworks Community

Hi,
I suggest to repair .ost file to check this issue by the following steps:
Exit Outlook.
In Control Panel, click or double-click Mail.
In the Mail Setup dialog box, click E-mail Accounts.
Click the Data Files tab, select the Exchange account, and then click
Open File Location. A file explorer window opens to the location of the data file for the Exchange account. The
Account Settings and Mail Setup dialog boxes will remain open, behind the file explorer window.
Close the Account Settings and the Mail Setup dialog boxes, then return to the file explorer window.
Important: be sure to close these two dialog boxes before you delete the file. If they aren't closed, Windows may display an error message about a conflict.
In the file explorer window, right-click the Exchange data file and then click
Delete. The next time you start Outlook, a new .ost file is created for the account.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Exchange 2010 CAS Mailbox Re-direction / Proxying Not Working Properly

Hello Team
In my Exchange 2010 Lab Setup, CAS proxy is not working properly
In Site A : One DC , One HUb Server , 2 CAS Server (CAS ARRAY WIndows NLB), Mailbox Server 2 (DAG)
In Site B : One ADC one hub and CAS( Both are in same box) One Mailbox
Internal and External for SITE A on Server CASARRAY1.labbites.co.in is https://casarray1.labbites.co.in/owa and https://casarray1.labbites.co.in/owa
Internal and External for SITE A on Server CASARRAY2.labbites.co.in is https://casarray2.labbites.co.in/owa and https://casarray2.labbites.co.in/owa
DNS recory casarray.labbites.co.in is present
Internal and External for SITE B on Server INDLBGUEX01.labbites.co.in is https://indlbguex01.labbites.co.in/owa and https://indlbguex01.labbites.co.in/owa
The problem is occurs , whenever the second CAS server casarray2.labbites.co.in is down (Shutdown)
Now , when the user ifrom site A s trying to log in to the OWA with SITE B OWA LINK https://indlbguex01.labbites.co.in/owa it redirects to always https://casarray2.labbites.co.in/owa , since casarray2 server is down the OWA page
is not opening
My Question is Why the proxy re-direction is always going to second casarray2 server instead of casarray.labbites.co.in
how to correct it . please help me to over come the issue

Hi Albert
Thanks for you update
Get-mailboxdatabase | FT name, RPC*
Name RpcClientAccessServer
DB1 casarray.labbites.co.in
DB2 casarray.labbites.co.in
DB3 casarray.labbites.co.in
Site B Mbx -DB1 INDLBGUEX01.labbites.co.in
The user is administartor who beloings to DB1 and accesing the OWA from the SITE B CAS server link https://indlbguex01.labbites.co.in/owa
and it is redirecting to https://casarray2.labbites.co.in/owa
so as per the above
output , should i make RPCclientaccess server for Site B Mbx -DB1 as casarray.labbites.co.in

Exchange 2010: Resource mailbox not sending conflict notification

Similar Messages

Maybe you are looking for