Exchange 2010 SP1 Upgrade to SP2 and SP3. Choose language.

Hello.
I going to install Exchange 2010 SP1 multilanguage and then update to SP2 and SP3
But then i download SP2 from Microsoft it's ask fоr choose language.
It ask about installer language or about Exchange language?
What language i need to choose if i have multilanguage Exchange SP1 installer?
And if i want to Exchange EMC be in English and Outlook on client machine shows Russian what language i need to choose when install first role from Exchange 2010 SP1 multilang DVD?

Exchange EMC language depends on OS version where you are running it.
Besides about client language you have to choose Russian language pack during install. More info below...
The language of the Outlook user interface that an Outlook user sees, including the content generated by Exchange, depends on the following:
The language the user is using in Outlook
Whether the language they're using in Outlook is supported by Exchange 2010
Whether the language they're using in Outlook has been configured to be available on the Exchange 2010 server
Consider the following scenarios:
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox and both Outlook and Exchange 2010 support the language the user has specified, <Language A>, the user will see all messages and Exchange-generated
mailbox components, for example, the Inbox, in Language A.
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox that's been set to <Language B>, the Outlook user will see the Outlook user interface in Language A, but will see the content generated
by Exchange. For example, by default, folder names such as Inbox,
Deleted Items, and Sent Items display in <Language B>.
You can change the Exchange mailbox language setting on the server using Exchange Management Console or the Exchange Management Shell. For information about how to use the Shell to change the language setting for a mailbox on a server, see
Set-MailboxRegionalConfiguration.
From: Client Language Support for Outlook -
http://technet.microsoft.com/en-us/library/dd638175%28v=exchg.141%29.aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here

Similar Messages

  • Upgrade From Exchange 2010 SP1 to SP3 - Schema Upgrade Question

    Hello,
    We're currently running Exchange 2010 SP1 in our environment and want to upgrade to SP3.  I just had a couple of questions related to preparing AD for this new SP that I was hoping that someone could answer.
    Setup
    We have a single forest with two domains within it (A and B for example).  The schema master is in Domain A but this domain doesn't contain any Exchange 2010 servers.  Domain B contains our 2010 CAS and Mailbox servers.
    Both domains have Windows 2003 SP2 domain controllers.
    I understand that before I proceed with the upgrade to SP3, I first need to update the AD schema on our schema master. I was planning on doing the following :
    Log onto an existing Windows 2008 R2 64 bit "member" server in domain A (containing the schema master) with an account which is a member of the Schema Admins and Enterprise Admins groups.
    Run SETUP.EXE /PrepareAD.
    Do I need to also run SETUP.EXE /PrepareDomain on domain A as well or does the /PrepareAD sort this out ?
    I was then going to turn my attention to domain B (which contains the 2010 CAS and Mailbox servers) and do the following :
    Log onto an existing Windows 2008 R2 64 bit 2010 Mailbox server with an account which is a member of the Domain Admins and Enterprise Admins groups.
    Run SETUP.EXE /PrepareDomain
    Is this the correct procedure to follow ?  I assume that I can then go ahead and start to upgrade the Exchange 2010 SP1 servers in the following sequence :
    CAS\HUB Server(s)
    Mailbox Server(s).
    Clarification on the AD upgrade steps would be appreciated.
    Thanks
    Mark

    This has all the info you need:
    http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
    Prepare Active Directory and Domains
    and
    http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
    Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
    Note: There is no harm in simply running setup/PrepareAllDomains.
    You should break out each Prep step since you have multiple domains:
    setup/PrepareSchema
    setup /PrepareAD
    setup /PrepareAllDomains
    you can run all of these from the same DC you run the setup/PrepareSchema step!
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation

    I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says:
           Error:
           The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 EnableServices Critical" was run: "AuthorizationManager check failed.".
    The WMI service is being disabled and not starting back up after, causing the error. I have tried the following:
    -Confirmed that the ExecutionPolicy is set to undefined/unrestricted for the localmachine
    -Confirmed no GPO exists in our domain to restrict this
    Every single time I run the install the WMI service switches to disabled and the localmachine Execution Policy is switched to RemoteSigned.
    I have tried the Google search steps except for the Setup /M:Recoverserver since I really don't know what that would do to our Exchange environment. I have seen some posts that the Exchange 2010 MGMT tools are not supported on Win 8, which I find hard to
    believe. I get no unsupported error just this incredibly frustrating error.
    Any ideas?

    What you are doing is totally unsupported:
    http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
    By the way, Exchange 2010 sp1 and SP2 are no longer supported, the minimum supported is SP3.
    http://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

    Hi there,
    I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
    Our current Exchange environment consists of the following:
    1 x CAS/HT Server
    2 x Mailbox Server (members of a DAG)
    The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
    The Execution Policies on our Exchange servers are set as follows:
    – CAS/HT Server:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine Unrestricted
    – Mailbox Servers:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine RemoteSigned
    Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
    I would be very grateful if you (or any of the kind readers) could help me with following questions:
    1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
    2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
      i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
      ii. Install SP3 followed by RU 5 on the first mailbox server
      iii. Install SP3 followed by RU 5 on the second mailbox server
    Many thanks,
    M

    Hi Amit,
    Many thanks for the swift reply.
    That's correct.  We didn't set the Powershell execution policy via Group Policy.  We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
    The mailbox servers' execution policies have not been changed and are set to those values by default.
    I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
    But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

  • Best Path to upgrade Exch 2010 SP1/W2K8 R2 to Exch2010 SP3/W2K8 R2 SP1

    What would be the best path forward to upgrade an existing Exchange 2010 SP1 server (no rollups) on Windows Server 2008 R2 to Exchange 2010 SP3 on Windows Server 2008 R2 SP1? Exchange is on a DAG with a secondary server.

    Hi,
    In addition to Ed Crowley's suggestion, I would like to clarify the following thing about upgrading Exchange server and Windows server:
    In-place upgrade is not supported, it will break Exchange.
    Here is a thread for your reference.
    In-place upgrade exchange 2010-SP3 to Windows Server 2012
    http://social.technet.microsoft.com/Forums/en-US/be9e10c3-c090-449b-bff3-693f52490d8d/inplace-upgrade-exchange-2010sp3-to-windows-server-2012?forum=exchange2010
    In your case, you need to set up a new server, move mailboxes to it at first.
    Secondly, upgrade Windows server.
    Hope it helps.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Delete emails from a specific folder in Exchange 2010 SP1

    Hi all,
     Since Exchange 2010 SP1 does not have “-DeleteContent” parameter in mailboxexportrequest any more, how do we delete emails from a specific folder of a user mailbox? (Personal folder, not default folders).
    Please note that the ASQ for searchquery in Search-Mailbox does not support “folder”.
    If going for retention policy, is there a way to tag a retention policy to a specific folder of a user mailbox without user attention?
    William Yang
    William Yang

    Hi William,
    Yes, you may not run the Search-Mailbox to delete items in specific folder at the moment. Hope it will be back soon.
    You can create a Personal tag, users can apply personal tags to folders they create. But users have to select related Retention Policy using Outlook or OWA manually.
    For more information, please see:
    Understanding Retention Tags and Retention Policies
    http://technet.microsoft.com/en-us/library/dd297955.aspx
    Frank Wang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Exchange 2010 SP1 install fails with -1603 error

    I am getting a -1603 error when installing Exchange 2010 SP1.  Installation fails when copying files/removing old version with the following error:
    [10/01/2010 23:17:06.0823] [2] Beginning processing uninstall-MsiPackage -ProductCode:'6574fdc2-40fc-405a-9554-22d1ce15686b' -LogFile:'C:\ExchangeSetupLogs\InstallSearch.msilog'
    [10/01/2010 23:17:06.0847] [2] Removing MSI package with code '6574fdc2-40fc-405a-9554-22d1ce15686b'.
    [10/01/2010 23:17:09.0400] [2] [ERROR] Unexpected Error
    [10/01/2010 23:17:09.0401] [2] [ERROR] Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
    [10/01/2010 23:17:09.0401] [2] [ERROR] Fatal error during installation
    [10/01/2010 23:17:09.0409] [2] Ending processing uninstall-MsiPackage
    [10/01/2010 23:17:09.0411] [1] The following 1 error(s) occurred during task execution:
    [10/01/2010 23:17:09.0412] [1] 0.  ErrorRecord: Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
    Does anyone know how to resolve this?
    Thanks,
    greg

    Hi Frank,
    I've the same problem when I try to install the SP2.
    When I try to install RU 4v2, 5 or 6, then comes error 2771. So I waiting for SP2 in the hope, a full install of the SP will fix this.
    But the setup broke with the following entries:
    [12.07.2011 19:51:59.0379] [0] Setup will run the task 'uninstall-msipackage'
    [12.07.2011 19:51:59.0379] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU''
    [12.07.2011 19:51:59.0379] [1] Die Active Directory-Sitzungseinstellungen für 'Uninstall-MsiPackage' lauten: Vollständige Gesamtstruktur anzeigen: 'True', Konfigurationsdomänencontroller: 'LicPDC.kh-lichtenstein.local', Bevorzugter globaler Katalog:
    'LicPDC.kh-lichtenstein.local', Bevorzugte Domänencontroller: '{ LicPDC.kh-lichtenstein.local }'
    [12.07.2011 19:51:59.0379] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU'
    [12.07.2011 19:51:59.0410] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
    [12.07.2011 19:52:04.0551] [1] [ERROR] Unexpected Error
    [12.07.2011 19:52:04.0551] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Schwerwiegender Fehler bei der Installation. Error code is 1603.
    [12.07.2011 19:52:04.0551] [1] [ERROR] Schwerwiegender Fehler bei der Installation
    [12.07.2011 19:52:04.0613] [1] Ending processing uninstall-msipackage
    The MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1' ist the SP1.
    Actual System: Server2008R2SP1 / Exchange2010SP1 RU3v3
    It is possible to solve this problem?
    Rene Hubert - Systemadministrator - DRK KH Lichtenstein gGmbH
    I too have this
    problem.

  • Exchange 2010 SP1 management console fail

    Exchange 2010 SP1 management console fail on local exchange servers.
    The following error occurred while attempting to connect to the specified Exchange server CAS123.domain.co.za
    The attempt to connect to
    http://cas123.domain.co.za/PowerShell using “kerberos” authentication failed: Connecting to remote server failed with following error message: The WS-Management service cannot process the request because IP address cas123.domain.co.za is invalid. For more
    information, see the about_Remote_Troubleshooting Help topic.
    However do note that the Exchange Management Shell also fails with the exact same error on both my CAS and Mailbox servers.
    Though I am still able to open both tools via my backup server.
    All ells works fine.
    nslookup resolves the exchange servers as they should be. Frankly I am stumped as to the invalid IP address.
    My exchange environment have been running problem free for years and this problem only occurred last week Thursday after some .NET updates.

    Hi,
    As per the information and details provided by you, the only thing that I can figure out is that: -
    You receive an error: Exchange 2010 SP1 management console fail.
    There are two methods to resolve this problem: -
    Method 1: -
    Close all MMC/EMC instances before proceeding.
    Open the Registry editor (regedit) as the user you run the EMC under.
    Go to
    HKEY_CURRENT_USER\SOFTWARE\Microsoft\ExchangeServer\v14\AdminTools
    Look for value, Node structure setting.
    If it is there, back it up and then remove it.
    Method 2: -
    Close all MMC/EMC instance before proceeding.
    Open powershell or powershell IDE as the user you run the EMC under and execute the following command:
    Remove-Item Property- Path
    HKCU:\Software\Microsoft\ExchangeServer\v14\AdminTools\ -Name NodeStructureSettings
    Close Powershell
    I hope this information will be helpful for you. Correct me if the information that I am having is wrong.
    Thanks and regards
    Ashish@V

  • Owa working but outlook cant connecting to the new mailbox in Hosted exchange 2010 SP1

    hi i recently join one organization they having Hosted Exchange 2010 Sp1 i created one new organization Unit and created 
    new MailBox but didnt give any permissions so when i try to connect to OWA then i log in and send and recive e-mails but when i try to connect to Outlook it say the name not found ...........
    please help me

    Hi sorry for so late respons i was on leaves .
    new User not connected automatically getting the message "user name Not found " also when i try to connect manually the error message " there is problem with the security certificate. the name on the security certificate is invalid or does not match ..." also
    Outlook some problem with some old Mailboxes
    from Exerca i get the following errors i.e Certificate related 
    The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected].
      Autodiscover was tested successfully.
    Additional Details
        Elapsed Time: 2927 ms.
    Test Steps
            Attempting each method of contacting the Autodiscover service.
      The Autodiscover service was tested successfully.
    Attempting to test potential Autodiscover URL https://xyz.co.uk/AutoDiscover/AutoDiscover.xml
      Testing of this potential Autodiscover URL failed.
    Additional Details
             Elapsed Time: 417 ms.
    Test Steps
    Attempting to resolve the host name xyz.co.uk in DNS.
      The host name resolved successfully.
    Additional Details
    Testing TCP port 443 on host xyz.co.uk to ensure it's listening and open.
      The port was opened successfully.
    Additional Details
    Testing the SSL certificate to make sure it's valid.
      The SSL certificate failed one or more certificate validation checks.
    Additional Details
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server xyz.co.uk on port 443.
      The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
    Additional Details
    Validating the certificate name.
      Certificate name validation failed.
      Tell me more about this issue and how to resolve it
    Additional Details
        Attempting to test potential Autodiscover URL https://autodiscover.xyz.co.uk/AutoDiscover/AutoDiscover.xml
      Testing of this potential Autodiscover URL failed.
    Additional Details
    Test Steps
    Attempting to resolve the host name autodiscover.xyz.co.uk in DNS.
      The host name resolved successfully.
    Additional Details
    Testing TCP port 443 on host autodiscover.xyz.co.uk to ensure it's listening and open.
      The port was opened successfully.
    Additional Details
    Testing the SSL certificate to make sure it's valid.
      The SSL certificate failed one or more certificate validation checks.
    Additional Details
    Elapsed Time: 270 ms.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.xyz.co.uk on port 443.
      The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
    Additional Details
    Validating the certificate name.
      Certificate name validation failed.
      Tell me more about this issue and how to resolve it
    Additional Details
        Attempting to contact the Autodiscover service using the HTTP redirect method.
      The Autodiscover service was successfully contacted using the HTTP redirect method.
    ..........................   Please help me how to resolve

  • Exchange 2010 SP1 - Export to PST, Remove Mailbox

    I'm looking for a PowerShell script that will allow me to use Exchange 2010 SP1 to export a mailbox to PST and then when finished, delete the user and mailbox. I typically do this process manually about 6 months after an employee leaves the company (allowing
    for live access to the mailbox and message forwarding to their supervisor).
    Ideally, the script would take input for a mailbox ID, and then export the file to a file of the mailbox name (Prompt: jdoe -> New-MailboxExportRequest -Mailbox jdoe -FilePath \\server\path\jdoe.pst). After the export is complete, it would schedule the
    mailbox for complete removal and remove the completed mailbox export request. The prompt and export process should be simple enough, but I suspect the difficulty will come with monitoring for the completed request before acting on the removal.
    Thanks for any help provided! :)

    Thanks for the guidance!
    I think I was able to come up with something that will do the trick nicely:
    $Name = Read-Host "Please enter a mailbox to archive"
    New-MailboxExportRequest -Mailbox $Name -FilePath \\Exchange\C$\ExchangeExports\$Name.pst
    while ((Get-MailboxExportRequest -Mailbox $Name | Where {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"}))
    sleep 60
    Get-MailboxExportRequest -Mailbox $Name | Remove-MailboxExportRequest -Confirm:$false
    Remove-Mailbox -Identity $Name -Confirm:$false
    Hopefully it may help others.

  • Weblogic 6.1 server upgrade from SP2 to SP3

    Hi All
    We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
    have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
    But that installable seems to over-write the previous weblogic server & installs
    the server afresh. Is there any patch kinda thing available which allows me to
    upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
    thanks in advance
    -Kiran Rane

    Upgrade installer from SP2 to SP3 is only available for paid BEA
    customers. You need a login at http://support.bea.com
    Kumar
    kiran rane wrote:
    Hi All
    We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
    have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
    But that installable seems to over-write the previous weblogic server & installs
    the server afresh. Is there any patch kinda thing available which allows me to
    upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
    thanks in advance
    -Kiran Rane

  • Different session handling of weblogic on SP2 and SP3

              I have set up 2 weblogic servers which are using the same cookie name, and having
              the same webapp name, on the same physical machine thus
              http://127.0.0.1:7220/test (Server A).
              http://127.0.0.1:9999/test (Server B).
              Using Weblogic 6.1 Service Pack 2
              1. Access Server A
              - Server A generate a new Session ID "123456...."
              2. Redirect Link from Server A to Server B
              3. Access Server B
              - Server B generate a new Session ID "987654..."
              4. Redirect Link from Server B to Server A
              5. Access Server A
              - Reused the same session ID "123456...."
              Using Weblogic 6.1 Service Pack 3
              1. Access Server A
              - Server A generate a new Session ID "123456...."
              2. Redirect Link from Server A to Server B
              3. Access Server B
              - Server B generate a new Session ID "987654..."
              4. Redirect Link from Server B to Server A
              5. Access Server A
              - Regenerate a new session ID "ABCDEFGHI...."
              Why weblogic server handle session differently in SP2 and SP3??
              

    I think this was a bug in SP3. You could raise a support ([email protected]) call to
              confirm.
              Rick Bongpipat wrote:
              > "Rick Bongpipat" <[email protected]> wrote:
              > >
              > >I have set up 2 weblogic servers which are using the same cookie name,
              > >and having
              > >the same webapp name, on the same physical machine thus
              > >
              > >http://127.0.0.1:7220/test (Server A).
              > >http://127.0.0.1:9999/test (Server B).
              > >
              > >Using Weblogic 6.1 Service Pack 2
              > >
              > >1. Access Server A
              > >- Server A generate a new Session ID "123456...."
              > >2. Redirect Link from Server A to Server B
              > >3. Access Server B
              > >- Server B generate a new Session ID "987654..."
              > >4. Redirect Link from Server B to Server A
              > >5. Access Server A
              > >- Reused the same session ID "123456...."
              > >
              > >Using Weblogic 6.1 Service Pack 3
              > >
              > >1. Access Server A
              > >- Server A generate a new Session ID "123456...."
              > >2. Redirect Link from Server A to Server B
              > >3. Access Server B
              > >- Server B generate a new Session ID "987654..."
              > >4. Redirect Link from Server B to Server A
              > >5. Access Server A
              > >- Regenerate a new session ID "ABCDEFGHI...."
              > >
              > >Why weblogic server handle session differently in SP2 and SP3??
              >
              > In relation to previous question.
              >
              > I have 3 qns about session creation behaviour:
              >
              > 1. When a web container receives a session cookie (eg. JSESSIONID) whose session
              > id does not exists in this
              > server, should the server create a new session ?
              >
              > 2. If a session is to be created because there is a session cookie, then should
              > the new session id
              > be the one sent or should it be a newly generated session id ?
              >
              > 3. If a new session id is to be generated, then should the new session id be used
              > to overwrite that in the cookie
              > and send it back to the client ?
              Rajesh Mirchandani
              Developer Relations Engineer
              BEA Support
              

  • Diff between WLAI sp2 and sp3

    Hi,
    Can somebody tell me the major difference between Weblogic Integration 2.0
    SP2 and SP3
    w.r.t Weblogic Application Integration. Basically the enhancements in ADK.
    Do I need to change anything
    for my adapter ? I see and extra directory called license, is it for the
    license support of the custom developed adapter, i.e
    as adapter needs to have their own licenses, so is this some sort of
    framework in ADK ?
    Thanks
    Amit

    Thanks Chris,
    That helps.
    Amit
    Chris Stead <[email protected]> wrote in message
    news:[email protected]...
    Amit/All,
    You currently have access to a "sanitized" version of the release notes.The only
    thing you won't have is CRs fixed and known issues. New features, etcwill be
    listed. How do you get this "santized" version of the release notes? Yougo to the
    download page and select WLI/select platform/Proceed to Download/log-in tothe BEA
    Download Center/accept license agreement and then you will be at theSoftware
    Download page. On this page, you will see a link "Download WeblogicIntegreation
    2.0 Service Pack 3 Documentation and Sample Code"
    Hope this helps!
    Cheers,
    Chris
    Chris Stead wrote:
    Amit,
    I understand your situation. I will run it by the appropriate people
    and see if
    they will make the release notes available to adapter developers. Otherthan
    that, this mailing list is also a great resource. It has been ourapproach to
    update the sample adapters with the new feature enhancements and listthem in
    the release notes. Maybe we could post the new changes to this listalso for
    the benefit of adapter developers using the ADK. Sorry for theinconvience.
    >>
    Do you still have questions?
    Cheers,
    Chris
    Amit wrote:
    Hi Chris,
    The release notes are only available for customers, and am just a
    developer, so am not able to view this document.
    Its difficult to open the code for DBMS/EMAIL adapter and look for the
    changes w.r.t the pervious version.
    Thats why I was just looking if someone can tell that or point me to
    some
    documentation, 'coz I had started developing
    my adapter when ther version was WLIF1.0. So, thats why am not sure ifI
    need to make some changes in my existing code
    so as to use the framework more efficiently.
    Thanks
    Amit
    Chris Stead <[email protected]> wrote in message
    news:[email protected]...
    Amit,
    The biggest thing moving forward is using display.jsp versus
    control.jsp.
    We
    will always keep the sample adapters (DBMS, Email, Sample) up to
    date on
    the
    latest changes to the ADK. This is also listed in the Release
    notes. If
    you
    are also interested in editing events/services, please look at the
    DBMS
    adapter
    for this.
    Cheers,
    Chris
    Amit wrote:
    Hi,
    Can somebody tell me the major difference between Weblogic
    Integration
    2.0
    SP2 and SP3
    w.r.t Weblogic Application Integration. Basically the enhancements
    in
    ADK.
    Do I need to change anything
    for my adapter ? I see and extra directory called license, is it
    for the
    license support of the custom developed adapter, i.e
    as adapter needs to have their own licenses, so is this some sortof
    framework in ADK ?
    Thanks
    Amit

  • Installing locales for portal SP2 and SP3

    I need help installing japanese locales for portal SP2 and SP3. I have
    found some documentation and have done the pkgadd but i have yet to be
    able to get it to work properly.
    any ideas

    Hi Mathis,
    To install Japanese locale do the following:
    1) Untar the Japanese Language Package (desktoppackage.tar)into a directory (/opt/desktoppackage).
    #tar -xvf <Package_name>
    2) Do a pkgadd to install the Japanese language and follow the instructions thereafter.
    #pkgadd -d . SUNWwtdjp
    3) Restart both the Portal Server and Gateway.
    To check the Locale:
    1) Goto Desktop Servlet and User Information Channel.
    2) Click edit and scroll down to Locale Information. You must see the Japanese language included here.
    3) Select Japanese locale and click "Finish" button.
    4) Log out and return to desktop.
    This must help you out in configuring Japanese Locale.
    Cheers,
    raj_slash.

  • Exchange 2010 SP1 and SP2 are no longer supported.

    Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
    Support for 2010 SP1 and SP2 has ended.
    Before posting a question, please ensure you are running at least 2010 SP3.
    For more details:
    http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

    Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
    Support for 2010 SP1 and SP2 has ended.
    Before posting a question, please ensure you are running at least 2010 SP3.
    For more details:
    http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Maybe you are looking for

  • I lost my ipod touch, i know there is a way to find it through what i have purchased, i have an ipad as well, so i do not know if the system differenciates and how to do it

    I lost my IpodTouch; I know there is a way to find it as in a google map, but I do not know how, can someone tell me ?? I do not even have the ID for the ipod but through purchases in the i store, can I know and then look for it?

  • How to restart the Servlet Engine?

    Hi I am configurating a WebDAV repository in KM I am required to restart the Servlet Engine. Can anyone please explain me how to restart the servlet engine. Thanks in advance -madhu

  • Doubt in using replace statement

    Hi all,    I have a requirement where user will enter more than 1 label no in a screen, which will be populated internally in a table by SAP with ## for every ENTER button pressed by the user. the internal table populated by SAP will be having values

  • Run Query in Background

    Hello Gurus,                Could you send me how to run query in background. There is a record which uses 2-3 years old data which takes 4-5 hrs to run, so we decided to run this query as soon as ODS is loaded with data everyday. This will solve the

  • Hp 1510 all in one

    Every time I switch on the display shows there is 1 Copy waiting and the warning light shows because there is no paper in the machine. Before I can use the machine I have to reset by pressing cancel. I do not want to leave paper in the machine as I d