Exchange 2010 SP2 Upgradation in DR site

Hi All,
I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
:\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
Welcome to Microsoft Exchange Server 2010 Unattended Setup
Preparing Exchange Setup
    Copying Setup Files                           COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites                                 COMPLETED
    Organization Checks                                      
FAILED
     Setup needs to contact the Active Directory schema master but this computer
 is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
 Exchange organization-level objects have been created but have not yet replicat
ed to the local domain.  Wait for replication to complete and then run setup aga
in.
    Language Pack Checks                                     
COMPLETED
    Hub Transport Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
 Exchange organization-level objects have been created but have not yet replicat
ed to the local domain.  Wait for replication to complete and then run setup aga
in.
    Client Access Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
 Exchange organization-level objects have been created but have not yet replicat
ed to the local domain.  Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Please let me know if you have options

Hi All,
I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
:\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
Hi,
If you run Get-OrganizationConfig | fl Name,objectversion in your DR-Site, what is the version number you see?
If its not 14247, the schema has not been upgraded.
/Hosting is not supported with SP2, so you need to leave that out.
It might be better if you post in the forum
Exchange 2010 for Hosters
Some additional reading:
Future of /Hosting Mode
Martina Miskovic

Similar Messages

  • Upgrade Exchange 2010 SP2 to SP3 getting fail

    Hi,
    I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
    I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    Preparing Exchange Setup
        Copying Setup Files                           COMPLETED
    The following server roles will be upgraded
    Languages
    Hub Transport Role
    Client Access Role
    Management Tools
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Organization Checks                                      
    FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Language Pack Checks                                     
    COMPLETED
        Hub Transport Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Client Access Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Exchange Server setup encountered an error.
    Thanks,
    San

    Hi,
    Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
    on domain controller holding schema master role.
    Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

    I am working on a large mailbox migration from one AD site to another. 
    Exchange version at both sites:Exchange 2010 SP2
    Two Mailbox Servers: MBX01 in site A / MBX02 in site B
    (There is a DAG but keeping this simple)
    Two CAS Arrays: CASA.domain.com / CASB.domain.com
    The RPCClientAccessServer property is set accordingly.  Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
    Clients:Outlook 2010 SP1
    Scenario: I successfully move a mailbox from Site A to Site B.  The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
    I have seen a few articles regarding this pointing to workarounds such as:
    - repairing the outlook profile on the client
    - delete the existing outlook profile
    - run a script to update the prf file (re-cache's email at the client)
    I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
    I would also like to know if you have seen this affect ActiveSync devices.  I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
    I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
    Thanks.
    Mike

    Hi,
    Seems you got several replies in the thread below that you posted in Exchange forum:
    http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
    Please come back to the thread above and check if the replies are helpful.
    Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
    I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Exchange 2010 SP2, Update Rollup 7

    Our setup before we applied Rollup 7:
    Exchange 2010, SP2 Update Rollup 6 running on all servers.
    2 Mailbox servers w/ DAG
    3 CAS/HUB Servers using a hardware load balancer
    No problems prior to the Rollup 7 installation.
    The Rollup went fine on 4 out of the 5 Exchange Servers. On the 5th server, however, there are problems. The first time I tried to install RU7 it was about 5 hours in when I cancelled it. So I tried again and the install has been running for 13
    hours and it appears to be only about 40% complete. The progress bar has been stuck in the same spot for nearly all of that time. Per an article I found on Susan Bradley site (SBS Diva) I had verified that "Check for publisher's certificate revocation"
    was disabled in IE prior to the start of the install.
    I have seen Service Packs take a long time in the past and I have Rollup Updates take a long time too, but this is taking a very long time.
    Anyone else  observing this issue with this latest Update Rollup for Exch10, SP2?
    Thanks.

    Hi,
    When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
    The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
    be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
    and please find below event log:
    Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
    on turning on logging support.
    Can you please help me with this error.
    Thanks

  • Unity 5.0 compatibility with Exchange 2010 SP2?

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

  • EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

    Hi guys,
    Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
    this related to Exchange 2010 SP1 known issue. 
    http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
    But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

    Hi,
    Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
    When did this issue begin?
    Please restart the AD topology service to check result.
    Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 sp2 emc initialization error using "kerberos" authentication failed

    We use exchange 2010 SP2.
    We have 2 management stations, both w2k8 R2 SP1.
    I have one mangement station on which the emc and ems works ok.
    On the other management staiton (which is also in another ad site) the emc and ems don't work.
    I get the following error message : The attempt to connect to
    http://fqdnCasServer/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
    I have checked the time on the management station and on the exchange server and this is ok.
    It is not a permissions issue because the user functions ok on the other management station.
    On the bad management station I can open the emc once and after a minute I get an error message and the message access denied. From then on I can't connect any more.
    What am I doing wrong?
    Anyone any tips?
    Thanks,
    JB 

    This is what I get in the eventlog of the bad management station.
    Log Name:      MSExchange Management
    Source:        MSExchange CmdletLogs
    Date:          1/10/2012 11:39:27
    Event ID:      6
    Task Category: (1)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Server.domain.com
    Description:
    The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    Get-ExchangeServer
    {Identity=Servername}
    Domain/ou/ou/ou/ou/username
    Exchange Management Console-Local
    3080
    22
    00:00:00.3593888
    View Entire Forest: 'True', Configuration Domain Controller: 'FQDN DC', Preferred Global Catalog: 'FQDN DC', Preferred Domain Controllers: '{ FQDN DN }'
    Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'FQDN MGMTSTATION' couldn't be found on 'FQDN DC'.
    Context
    the message resource is present but the message is not found in the string/message table
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange CmdletLogs" />
        <EventID Qualifiers="49152">6</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2012-10-01T09:39:27.000000000Z" />
        <EventRecordID>11</EventRecordID>
        <Channel>MSExchange Management</Channel>
        <Computer>FQDN MGMT STATION</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Get-ExchangeServer</Data>
        <Data>{Identity=MGMT STATION}</Data>
        <Data>domain/ou/ou/ou/ou/username</Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>Exchange Management Console-Local</Data>
        <Data>3080</Data>
        <Data>
        </Data>
        <Data>22</Data>
        <Data>00:00:00.3593888</Data>
        <Data>View Entire Forest: 'True', Configuration Domain Controller: 'FQDN DC', Preferred Global Catalog: 'FQDN DC', Preferred Domain Controllers: '{ FQDN DC }'</Data>
        <Data>Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'FQDN MGMT STATION' couldn't be found on 'FQDN DC'.</Data>
        <Data>Context</Data>
        <Data>
        </Data>
      </EventData>
    </Event>

  • Exchange 2010 SP2 : Move calander entries and Task items from Archive mailbox to current active mailbox.

    Hi,
    After upgrade the exchange 2010 SP1 to SP2, all users calendar and task items entries also moved to archive mailbox from user's active mailboxes.
    We like to move 90 days older emails to archive mailbox but not calendar & task items to be moved.
    Any solution to move back those older archive calendar and task items to active mailbox users and also any settings to stop further to move calendar & task items to archive mailbox in SP2?
    Thanks
    MD

    Hi,
    Exchange 2010 SP2 RU4 added support for Calendar and Task Retiontion polices. For more information about that see the below blog post which also includes a workaround if you don't what these folders to be processed by MRM.
    Calendar and Tasks Retention Tag Support in Exchange 2010 SP2 RU4
    http://blogs.technet.com/b/exchange/archive/2012/08/14/calendar-and-tasks-retention-tag-support-in-exchange-2010-sp2-ru4.aspx
    PS. Exchange 2010 SP2 is no longer supported.
    Martina Miskovic

  • Applying Windows 2008 R2 SP1 on Exchange 2010 SP2 servers

    Hi All,
    Our current setup is Primary Site and DR site with a DAG.
    Primary site is having 2 Mailbox servers, 2 hubcas servers with an NLB and one CAS server for OWA.
    DR Site is having 1 mailbox server, one hubcas server and one CAS server.  All these exchange servers are SP2 with update roll up5.
    But the OS is Windows 2008 R2, need to apply Windows 2008 R2 SP1 on these servers, and what are things to be considered.
    Does this affect CAS servers IIS?
    Thanks,
    Kanishka.

    Agreed. One thing to mention - Win 2008 R2 needed SP1 a while back, no security updates have been released for a while.
    Exchange 2010 SP2 goes out of support next month. please plan to update to SP3 for Exchange 2010.
    http://blogs.technet.com/b/rmilne/archive/2013/10/08/save-the-date-end-of-exchange-2003-support-t-minus-6-months.aspx
    The details for that, and a link to the lifecycle page are in the above post.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Error 1603 when installing Rollup 4 for Exchange 2010 SP2

    Hi There,
    I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems.  However I have hit a problem with my 4th server.
    I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
    I have tried the following without success:
    Turning off UAC
    Running from elevated CMD prompt
    Running from elevated Powershell command
    Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
    Re-downloading the RU4 install package to the local disk on the server
    Adding more RAM and CPU resources
    I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
    but then all of a sudden just begins "Rolling back actions".
    The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
    to do so, could this have anything to do with it?
    I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
    I am running out of ideas so any help would be greatly appreciated.

    skippy-85,
    Any updates on this Issues?
    In case if the issue stands
    resolved, Please mark Solution for this Thread and close this.
    In case if you still have
    the issue with the RU4 installation do let us know!
    Thanks
    Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!!

  • Exchange 2010 SP2 UR8 Build number

    After upgrading to Exchange 2010 SP2 UR8 from SP2 UR6 the build number shows 14.02.0387.000 instead of
    14.2.390.3 as detailed in MS documentation.  Is this expected behavior?

    Yes, that is expected.
    AdminDisplayVersion doesn't change when a rollup is installed.
    Dude, where's my rollup?
    http://blogs.technet.com/b/exchange/archive/2010/03/08/3409469.aspx
    Martina Miskovic

  • Exchange 2010 Sp2 - Does not audit Shared calender access

    I have Exchange 2010 sp2 , I have enabled mailbox audit on few mailbox , as well as MSExchange IS logs for logon event to expert.(event ID 1016), 
    I am trying to get folderbind events , from shared calender access , like Non-owner mailbox event or anything that I can run audit get the detail if non-owner accessed the calender or mailbox folder etc..
    I found changes are logged like create , delete or any changes but not folderbind
    i have following on to few mailboxes.
    AuditEnabled     : True
    AuditLogAgeLimit : 90.00:00:00
    AuditAdmin       : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
    AuditDelegate    : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
    AuditOwner       : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, Create}
    Can some one please  help me to find what is missing to get folderbind  audit events when any non-owner access anything like shared calender etc..
    Thank you 

    Hi ANdy,
    Yes we have the followed the same commands as mentioned in both the article and the PPT as well. But i got the errors as mentioned in my thread above.
    Databases were not getting mounted, even when i tried the resume command still it failed.
    regards
    abubakar
    Md.Abubakar Noorani IT Systems Engineer Serco Ltd.
    Ok, because that is the part I wasnt clear about. I assume that the servers in the DR site are not set for automatic activation, so in order for them to mount, you would have to clear that block.
    When you tried to move the databases to the DR site, you got the same error message as you got when you ran the restore-databaseavailibilitygroup command?
    So, is everything back to normal? Did you run test-replicationhealth before you failed over?
    Also, anything of use in the cluster logs? “cluster log /g”.  
    I assume the MAPI bindings and NICS are set correctly since this worked before.
    Twitter!:

  • Outlook 2013 cannot connect to Exchange 2010 SP2 server, Outlook 2010, OWA work fine. Ideas?

    After upgrading a laptop from Outlook 2010 to 2013 it can no longer connect to our Exchange 2010 SP2 environment.  OWA works, Outlook 2010 works, but Outlook 2013 will not create a profile via AutoDiscover.  The first two checks go, the last check
    Log On To server will not.
    We can take the laptop to a different network and it works fine with Outlook 2013.
    What is different with Outlook 2013 where it will not connect.
    Jason Meyer

    Does it work when we recreate a new Outlook profile?
    At this point, We high recommand that we run Microsoft Connectivity Analyzer Tool from the folloing link to check what was happening
    https://testconnectivity.microsoft.com/
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • Exchange 2010 SP3 upgrade fails at stopping services for Management tools station

    Attempting to upgrade a Windows 7 SP1 64bit virtual machine from Exchange 2010 SP2 management tools to SP3 fails with the following error:
    Summary: 11 item(s). 1 succeeded, 1 failed.
    Elapsed time: 00:15:19
    Preparing Setup
    Completed
    Elapsed Time: 00:00:00
    Stopping Services
    Failed
    Error:
    The following error was generated when "$error.Clear();
              & $RoleBinPath\ServiceControl.ps1 -Operation:DisableServices -Roles:($RoleRoles.Replace('Role','').Split(',')) -SetupScriptsDirectory:$RoleBinPath;
              & $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
            " was run: "Service 'NetBT' failed to reach status 'Stopped' on this server.".
    Service 'NetBT' failed to reach status 'Stopped' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:15:19
    Here is the powershell execute policy:
    PS C:\> Get-ExecutionPolicy -list
    Scope                                            
    ExecutionPolicy
    MachinePolicy                                               
    Unrestricted
    UserPolicy                                               
    Unrestricted
    Process                                                  
    Undefined
    CurrentUser                                               
    RemoteSigned
    LocalMachine                                               
    RemoteSigned

    Hi Bad Dos,
    Any updates?
    You can also try to uninstall sp2 Management Tool first, then install SP3 directly. 
    Frank Wang
    TechNet Community Support

Maybe you are looking for

  • After ios 8 update ipad began to crash

    after ios 8 update apps been crashing and ipad began rebooting by it self it use to do it when first updated to ios 7 until the bug fix update was sent out what to do

  • Re-Installing Snow leopard - help please

    I bought my MacBook Pro with leopard and later upgraded to SnowLeopard. So I have a Leopard disk and a Snow Leopard disk. I want to completely re-install the system to start fresh, with a time machine backup, so I figured the best way was to erase th

  • Have recorded old videos to DVD, want to import (copy) to my imac to use in a project

    I have copied old home videos to DVDs and want to copy (import) portions of a couple to mu mac to use in a slide show/video. Was not able to import at all. Uses DVD+R and finalized. The mac did not see the non finalized dvd. I could even use a work a

  • Error message BL011: For object FIAA, no sub-object 100 is maintained

    Hi, When I execute asset revaluation transaction (J1AI), the system shows the following error message: For object FIAA, no sub-object 100 is maintained. I have searched this error in OSS notes but I haven't found anything about it. Could you help me?

  • Autocad 2015 Crashing on OSX Yosemite

    I recently upgraded to Apple's new opperating system (OSX Yosemite) and am experiencing random crashes every 5-10 minutes on Autocad 2015 for Mac. The crashes are not associated with any specific command or action but rather the program spontaneously