Exchange 2010 SP3 cohabitation Exchange 2013 ecp?exchver=15 from external not work

Hi
i have installed an exchange 2013 cohabitation with exchange 2010 for migration. outlookanywere,ecp,owa, autodiscovery...etc are configurered
when i try to connect to the eac or owa internaly its work, but when i try to do externaly https://mail.mydomain.com/ecp?exchver=15
i have error 302, 301 to many redirections
how can i fix this
thanksin advance

Hi,
Generally, status 301 means that the resource (page) is moved permanently to a new location. Please refer to Sneff_Gabor's suggetsion to check the Redirect setting s for OWA and ECP in IIS manager.
Additionally, please provide more information about your issue and collect any error logs for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Similar Messages

Calendar Sharing between 2 organisation Exchange 2010 SP3 and Exchange online with Federation Trust.

Hi...
Our company is running Exchange Server 2010 SP3 Standart would like to have Shared calendar with organisation running with Exchange online.
We made a Federation trust between organisations and I checked that one certificate was installed and the rule for their domain was created. but when I try to share my calendar I always receive.
"Calendar sharing is not available with the following contacts because of permission settings on your network."
Name I took from GAL or input manually and always same. Forgot to mention that we migrated from Exchange 2003 to 2010 SP3 and all old exchange servers I removed. I tried everything that I know and read and nothing helped.
Hope for your support.
Thank you.

1)I deleted everything and made step by step as indicated in your articles.
2) recreated organisation relationship:
RunspaceId : xxxxxxxxxx
DomainNames : {xxxxxxx.microsoftonline.com, xxxxxxxxx.onmicrosoft.com, xxxxxxx.com}
FreeBusyAccessEnabled : True
FreeBusyAccessLevel : LimitedDetails
FreeBusyAccessScope :
MailboxMoveEnabled : False
DeliveryReportEnabled : False
MailTipsAccessEnabled : False
MailTipsAccessLevel : None
MailTipsAccessScope :
TargetApplicationUri : outlook.com
TargetSharingEpr :
TargetOwaURL :
TargetAutodiscoverEpr : https://pod12312.outlook.com/autodiscover/autodiscover.svc/WSSecurity
OrganizationContact :
Enabled : True
ArchiveAccessEnabled : False
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
Name : xxx
DistinguishedName : CN=xxx,CN=Federation,CN=uxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=uxxx,DC=com
Identity : Lxx
Guid : a8xxx
ObjectCategory : upxxs.com/Configuration/Schema/ms-Exch-Fed-Sharing-Relationship
ObjectClass : {top, msExchFedSharingRelationship}
WhenChanged : 27/01/2015 3:23:47 PM
WhenCreated : 26/01/2015 9:41:39 AM
WhenChangedUTC : 27/01/2015 8:23:47 PM
WhenCreatedUTC : 26/01/2015 2:41:39 PM
OrganizationId :
OriginatingServer : xxx.upxxxns.com
IsValid : True
3. Configured Sharing Policies:
[PS] C:\Windows\system32>Get-SharingPolicy
Name Domains Enabled Default
Default Sharing Policy {*:CalendarSharingFreeBusySimple} True False
Lxxx {lxxx.com:CalendarSharingFreeBusy... True True
added my mail box to sharing policy but in the end receive same error
Calendar sharing is not available with the following contacts because of permission settings on your network.
In EventViewer everything seems to be fine....
No errors on policy creation... How can be checked this permission
settings on your network they are on exchange on in DC ?

After Exchange 2010 SP3 and rollup 4 update conditional formatting causes messages not to appear in Outlook 2010

Hi,
after updating to exchange 2010 sp 3 from sp 2 and also updating to rollup 4, users who use conditional formatting cannot see new message unless they close and reopen Outlook.
If you decide to change the font colour for unread messages, the messages do not appear in Outlook but a pop up indicates that a new message has arrived.
If you reopen Outlook, the unread messasge appears.
remove the conditional formatting and no issue with viewing unread messages as they arrive.
running Outook version 14.0.7106.5003
is this a known issue? a user who never used conditional formatting will experience this right away.
Thanks,
rudif

Hi rudif,
If the issue only happens to users who use conditional formatting and OWA can work well for all mailbox, I think the issue should be in client side.
Please try to reset View then set the conditional formatting back to have a try. If the issue continues, please try to recreate the Outlook profile to check whether the issue persists. Also try restarting Outlook in Safe mode by running
Outlook /safe switch.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010 Mail Enabled Distribution Group Won't Receive from External Address

Let me pre-empt the usual first response: yes, I've unchecked "require that all senders are authenticated" on the Message delivery Restrictions properties of Message Delivery Restrictions. I cannot get a message from an external mail server to
send to an internal mail-enable distribution group. It's working internally. I've checked our ironport and the message is being sent to exchange (at least I think it is).
How can I troubleshoot this?!
tfgeorge

Ironport is definitely sending this email to exchange. Please read:
06 Jun 2011 08:53:20 (GMT -05:00)
Protocol SMTP interface Main Interface (IP Gateway IP) on incoming connection (ICID 17720578) from sender IP 65.54.190.154. Reverse DNS host bay0-omc3-s16.bay0.hotmail.com verified yes.
06 Jun 2011 08:53:20 (GMT -05:00)
(ICID 17720578) ACCEPT sender group UNKNOWNLIST match sbrs[-1.0:6.0] SBRS 3.0
06 Jun 2011 08:53:20 (GMT -05:00)
Start message 2136865 on incoming connection (ICID 17720578).
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 enqueued on incoming connection (ICID 17720578) from
[email protected].
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 on incoming connection (ICID 17720578) added recipient ([email protected]).
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 contains message ID header '<[email protected]>'.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 original subject on injection: TEST
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 (1471 bytes) from
[email protected] ready.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 matched per-recipient policy DEFAULT for inbound mail policies.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Spam engine: CASE. Interim verdict: Negative
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Spam engine CASE. Interim verdict: definitely negative.
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Spam engine: CASE. Final verdict: Negative
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Virus engine Sophos. Interim verdict: CLEAN
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 scanned by Anti-Virus engine. Final verdict: Negative
06 Jun 2011 08:53:20 (GMT -05:00)
Message 2136865 queued for delivery.
06 Jun 2011 08:53:20 (GMT -05:00)
SMTP delivery connection (DCID 1658840) opened from IronPort interface 100.100.100.100 to IP address 100.100.100.100 on port 25.
06 Jun 2011 08:53:20 (GMT -05:00)
(DCID 1658840) Delivery started for message 2136865 to
[email protected].
06 Jun 2011 08:53:21 (GMT -05:00)
(DCID 1658840) Delivery details: Message 2136865 sent to
[email protected]
06 Jun 2011 08:53:21 (GMT -05:00)
Message 2136865 to
[email protected] received remote SMTP response '2.6.0 <[email protected]> [InternalId=919833] Queued mail for delivery'.
tfgeorge

Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM

Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DK

Hello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help!

Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500

I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.

Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook. It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email. I easily replicated
this issue. For reference:
Exchange 2010 SP3 RU3
Windows 7 x64 Ent
Outlook 2013 (15.0.4551.1004) 32-bit
I do see that SP3 RU4 has been released, however the only change listed is a security patch.
Thank you for any ideas.

Hi, Everyone –
This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
over half a year. It was not fixed in the updates for Patch Tuesday this week.
I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
– I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all.
The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
Regards,
IT Helper

MS Exchange 2010 Sp3 Ent Migration to Exchange 2013

Hello,
We currently have 2 Exchange 2010 SP3 servers in 1 DAG. Both servers host CAS, Mailbox and Hub Role.
I want to introduce a 3rd Exchange 2013 Server and slowly move users onto a new DAG I build in Exchange 2013.
Can I create a 3rd Exchange 2013 Server with CAS and Mailbox Server Role and make the 3rd Exchange server (2013) a member of the existing (2010) CAS array then slowly perform local move requests for users mailboxes
from my Exchange 2010 DAG to the Exchange 2013 DAG without any disruption to my outlook, OWA and AS clients?
Exchange 2010 (Windows 2008 R2)
Exchange 2013 (Windows 2012 R2 DataCenter)

Hi,
In Exchange 2013, all Outlook connectivity (Internal and External) takes place over Outlook Anywhere(RPC/HTTP). Thus, CAS array which is used internal for RPC/TCP protocol (MAPI) no longer exists in Exchange 2013.
For your coexistence environment and the plan to migrate all mailboxes to Exchange 2013 in the future,
we need to set all virtual directories for CAS 2013 and enable Outlook Anywhere for Exchange 2010. If the mailbox is moved to Exchange 2013, the Outlook client would connect to the server which is set in Outlook Anywhere External host name
and Internal host name instead of CAS array. If all configurations are proper, CAS 2013 would also proxy the service requests for Exchange 2010 users.
Here are some reference about Client Connectivity in an Exchange 2013 Coexistence Environment:
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
Exchange 2013 Client Access Server Role
http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
Exchange Server 2013 Client Access Server High Availability
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
Exchange 2010/2007 to 2013 Migration and Co-existence Guide
http://msexchangeguru.com/2013/05/10/exchange2013-migration/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support

First Exchange 2013 server in an Exchange 2010 SP3 organization

I've read the documentation that states to install Exchange 2013 with CU2 as the first Exchange 2013 server in an organization running Exchange 2010 SP3. Maybe I over-read this to mean "Exchange 2013 with at least CU2" (meaning to start with Exchange2013-x64-cu3.exe),
but when I installed the CU3 version I ended up with Standard rather than Enterprise. I need to run 2013 with Enterprise. I've looked around for an Enterprise version of Exchange2013-x64-cu3.exe but cannot find one.
How do I install Exchange 2013 Enterprise into my Exchange 2010 SP3 organization? Thank you.

Please review
http://technet.microsoft.com/en-us/library/bb232170(v=exchg.150).aspx
These (Exchange 2013 Standard Edition and Enterprise Edition)
licensing editions are defined by a product key. When you enter a valid license product key, the supported edition for the server is established. Product keys can be used for the same edition key swaps and upgrades only; they can't be used
for downgrades. You can use a valid product key to move from the evaluation version (Trial Edition) of Exchange 2013 to either Standard Edition or Enterprise Edition.
You can also use a valid product key to move from Standard Edition to Enterprise Edition.

Install Exchange 2010 Sp3 on Windows 2012 R2

Dear All,
From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
Thank you

The prerequisite check is checking that the required Windows components are installed. Exchange 2010 is still not supported on Windows Server 2012 R2.

Migration from Exchange 2007 SP3 to Exchange 2010

Hello,
We are planning a single server migration from Exchange 2007 SP3 to Exchange 2010. I'll be building the 2010 server on a 2008 R2 box. My question is, can I make the jump directly to Exchange 2010 SP3, or do I need to install exchange 2010 SP1 first
- migrate from 2007 SP3, and then install SP3 for exchange 2010 later?
Thanks,
Eric

@ Hasan
Dimdik - TAT,
That's not correct at all, you can migrate exchange server 2007 SP3 and RollUp Update 10 minimum to Exchange Server 2013 with minimum CU1.
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Is WMF3 or WMF4 supported in Exchange 2010 SP3 UR5 installed on Server 2008 R2 SP1?

We'd like to upgrade WMF (aka powershell) on our Exchange 2010 servers but I haven't been able to find any updated information on support with the most recent servicepack/update rollup.
Is installing WMF3 or WMF4 supported on Server 2008 R2 SP1 w/ Exchange 2010 SP3 UR5?

WindowsPowerShell 3.0 is supported. Haven't seen 4.0 running for exchange 2010 on 2008 R2
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/30/weekend-scripter-wmf-powershell-and-exchange-server-compatibility.aspx
http://blog.crayon.no/blogs/janegil/archive/2013/11/17/how_2D00_to_2D00_install_2D00_windows_2D00_powershell_2D00_4_2D00_0.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Gulab,
Where did you read that WMF3 is supported on Exchange 2010 SP3 on Server 2008 R2?
Neither of the links you pasted suggest that and in fact explicitly say "There has been no testing with ExchangeServer 2010 SP3 and WMF 3.0 installed on Windows Server 2008 R2."
My Bad, that was TYPO...
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration

Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1722
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 323
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1237
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 313
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 311
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 318
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 53361   StoreEc: 0x977
    Lid: 51859
    Lid: 33649   StoreEc: 0x977
    Lid: 43315
    Lid: 58225   StoreEc: 0x977
    Lid: 39912   StoreEc: 0x977
    Lid: 54129   StoreEc: 0x977
    Lid: 50519
    Lid: 59735   StoreEc: 0x977
    Lid: 59199
    Lid: 27356   StoreEc: 0x977
    Lid: 65279
    Lid: 52465   StoreEc: 0x977
    Lid: 60065
    Lid: 33777   StoreEc: 0x977
    Lid: 59805
    Lid: 52487   StoreEc: 0x977
    Lid: 19778
    Lid: 27970   StoreEc: 0x977
    Lid: 17730
    Lid: 25922   StoreEc: 0x977
    + CategoryInfo          : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
   0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName        : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!

Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2010 SP3 Update Rollup 6 breaks first OWA login (timezone selection) on SBS 2011

The Exchange 2010 SP3 Update Rollup 6 broke the OWA for Users who access OWA for the first time and have to set a timezone. They get this error:
Request
Url: https://xxxxx:443/owa/languageselection.aspx
User: xxxxxx
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxx
SMTP Address: xxxxxx
OWA version: 14.3.195.1
Exception
Exception type: System.ArgumentNullException
Exception message: Value cannot be null. Parameter name: value
Call stack
Microsoft.Exchange.Clients.Owa.Core.Utilities.RenderDirectionEnhancedValue(TextWriter output, String value, Boolean isRtl)
Microsoft.Exchange.Clients.Owa.Core.LanguageSelection.RenderTimeZoneSelection()
ASP.languageselection_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
System.Web.UI.Page.Render(HtmlTextWriter writer)
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
This Server is an SBS2011.
The update broke nothing on a "normal" 2008R2 with exchange 2010.
Uninstalling RU6 helped but thats obviously not the desired way.
Removing the RenderTimeZoneSelection() call from languageselection.aspx obviously helped but then there is no timezone dropdown displayed anymore. The timezone dropdown is working normaly in other places like ecp. Afaik this error occours only in the languageselection.aspx
file which is displayed for "new" OWA users. (Users without a timezone set)
my workaround was to set the language and timezone for these mailboxes via exchange shell.

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2010 SP3 cohabitation Exchange 2013 ecp?exchver=15 from external not work

Similar Messages

Maybe you are looking for