Exchange 2010 SP3 Create Dynamic DL for Direct Reports

I am not sure this is possible but if there is a will there is a way I guess.
System: Exchange 2010 SP3 on Windows Server 2008 R2
I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
Thanks.

hi,
as from above i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Similar Messages

Exchange 2010 SP3 outlook prompot password for linked mailbox

Hi All,
I have forest A and forest B, there is an Exchange 2010 SP3 server in forest A, linked mailboxes are created for user inside forest B. Trust relationship can be verified , in place and active. Suddenly , some linked mailbox user got outlook password prompt
repeatedly but OWA and Active Sync is still working fine.
I have reset Exchange Web Services Virtual Directory. but the issue still persists. Please advise
Regards,
Zaw
ZAW

Step 1: Close Outlook program and create backup of PST file
Step 2: Now run SCANPST.EXE on copy of your PST and repair
SCANPST.EXE is found in these locations according to different Outlook versions:
In MS Outlook 2002/XP: C:\Program Files\Common Files\System\MAPI\ \scanpst.exe
In MS Outlook 2000:C:\Program Files\Common Files\System\MAPI\ \NT\scanpst.exe
In MS Outlook 97/98:C:\Program Files\Common Files\Windows Messaging\scanpst.exe
Note: Do not use backup option in SCANPST.EXE as you working with a duplicate copy of PST
file.
Step 3: Then open the command prompt by clicking Start >> Run
Step 4: Paste or type the file path to PST19UP and your PST name: PSTUPG19.EXE-filename.pst
and press Enter.
Step 5: The command line will resemble: “C:\My Documents\pst19upg.exe”- Outlook.pst.
Step 6: A new copy of the PST file will be created, which is called “filename.psx”.
Step 7: Once you have completed, rename the original PST file.
Step 8: Now at the Command Prompt, type “pst19upg.exe- filename.psx” and press Enter
Step 9: A new password-free PST file will be created from PSX file.
Step 10: Now open your MS Outlook program and open the PST file.

Exchange 2010 SP3 RU7 system requirements for server 2008

Exchange 2010 SP3 system requirements list server 2008 SP2 as being a compatible OS. KB2961522 only lists Windows 7 Professional 64-bit, Windows Server 2008 R2, Windows Server 2008 R2 SP1, Windows Server 2008 R2 Standard, Windows Server 2012.
Does it really support windows 7 but not server 2008 SP2??
Thanks

Hi,
Yes, Windows Server 2008 SP2 is supported on Exchange Server 2010 SP3. Windows 7 SP1 is only supported for Exchange management tools, not for Exchange server.
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Rollup 6 for Exchange 2010 SP3

Does anyone know when Microsoft is going to release either Rollup 6 or a patch for Exchange 2010 SP3? Rollup 3 for SP3 introduced the following issues:
“Some users (not all of them) report that they don't see new emails in their Outlook 2010 box on Shared folders, even though they got the new email message envelope. When they change folder and back to the Inbox the new mail is suddenly visible. Same sort
of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.”
We have installed Rollup 5 but it did not address the issue.
Thanks
Dave

Hi,
Currently, there is no official document about the release of RU6 for Exchange 2010 SP3. If the RU6 for Exchange 2010 SP3 will be coming, you can find this information in the Exchange Team Blog.
http://blogs.technet.com/b/exchange/
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

Hi,
Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
Thank you

I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure. If you mean "a folder that can contain calendar items", that is not a calendar
item itself.
Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?" If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
pretty unruly with the more that you have. I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
to). And anyone will tell you that you want to restrict anyone from creating their own folders at the root level. In fact, this is the default setting for a new Exchange 2010 installation.
I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

Unable to install rollup4 for Exchange 2010 SP3

Hi,
I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
I know that this process will take some time to complete but I have waited 10 hours.
I've tried to reboot the server and restart the setup.
Exchange is functioning perfectly otherwise.
Any help would be greatly appreciated :)
/Søren Emig

Hi,
I recommend you check if the anti-virus has been disabled before you start the upgrade process.
If you didn't ,the update could fail or take an extended amount of time.
Also, disable all other third-party apps/plugins that might be installed (like backup agents).
In addition,the following articles for your reference:
Install the Latest Update Rollup for Exchange 2010
When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
The installation takes a long time to complete.
You receive the following message during the installation: Creating native images for .Net assemblies
When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
To work around this issue and to reduce installation times, turn off the
Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Advanced tab, and then locate the Security section.
Clear the Check for publisher’s certificate revocation check box, and then click
OK.
After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
Generating NGEN images takes longer than expected
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2010 SP3 maximum journal mailbox size for performance

Hello all,
Does anyone know if there is a limit mailbox
size near 01 terabyte than
above it generates performance problems?
We have a journaling mailbox that
reached today 1.077 GB and
from there began the process very
slowly messages to store.
All (4) Exchange Hub Trasnport that try to connect to this store get an 4.32 store drive error. A new
journal mailbox was created in the same
database, and the problem was solved.
Thanks
João Paulo.
Exchange 2010 SP3 RU8 on-premisses

Hi Paulo,
Base on my knowledge, journaling mailbox as the same as any other mailbox, the maximum size depends on the data to be stored in the mailbox, the hardware resources available, and the disaster recovery requirements
for the server where the journaling mailbox is located.
If you configure journaling mailboxes without storage quotas, monitor the Mailbox server to ensure that it doesn't exceed the available hardware resources or disaster recovery capabilities.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Support Forefront Protection 2010 for Exchange 2010 SP3

Hi
I have a simple question: Is there a full support of FPE 2010 (Version 11.0.727.0) for Exchange 2010 SP3 (and Rollup Updates)?
Thomas

Hi,
It seems that FPE 2010 for exchange 2010 SP3 is supported and you need to install the Rollup 4. For more detailed information, please refer to the link below:
Hotfix Rollup 4 for Microsoft Forefront Protection for Exchange
Updates for Microsoft Forefront and Related Technologies
Hope this helps!
Susie

Exchange 2010 SP3 Update 7 breaks OWA for some IE11 users

I had issues earlier with OWA on some clients running Internet Explorer 11 (as
documented in this thread), and managed to resolve it by disabling compatiblity mode in IE11.
After SP3 Update Rollup 7 the issue came back, and no tinkering with the compatibility mode will solve it.
Have anyone encountered this issue before? The issue only appears on certain machines in their own AD OU as well as own subnets.

Hi,
I haven't heard that Exchange 2010 SP3 Update Rollup 7 has this issue so far. In your case, I would like to verify if you remove all interim updates for Exchange 2010 SP3 before installing Rollup 7. If no, remove it and check the result.
Here is a kb for your reference.
Update Rollup 7 for Exchange Server 2010 Service Pack 3
http://support.microsoft.com/kb/2961522
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Is there an ADOBE plugin for MS Project 2010 to create Dynamic PDF files?

I wonder if there exist any ADOBE plugin for MS Project 2010 to create Dynamic PDF files?

We are not going to use form fields. An employee is going to create large projects in MS Project 2010 and want to share his projects with other employees. So the need is just a viewer. So I guess we need to check out all the third part MS Project Viewers which is out there. Thanks for your answers guys!

Active Sync Not Working for NEXUS MOBILE in Exchange 2010 SP3 Enivironment..

HI Exchange Techy's.
We have Exchange 2010 SP3 Servers. Now All mobiles are working fine Through Active Sync Except Google Nexus.
Problem: Account has been activated successfully in Mobile, But Mails are not synchronized.
Kindly help fix me out of this problem.
We are welcome & Appreciate who are giving Comments & Solutions for this problem.
Regards,
One of your Exchange Person
B@[email protected]

Hi,
I'd recommend asking your question over here:
https://social.technet.microsoft.com/Forums/en-us/home?forum=exchangesvrmobilitylegacy&filter=alltypes&sort=lastpostdesc
This forum is meant for feedback on the TechNet website/subscriptions, not product support.
Good luck.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Latest Update Rollup for Exchange 2010 SP3

Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS

Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS
Personally, if you are going to update the servers, you should apply the latest RU regardless. So I would go with RU7.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

Quick question.
What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
Hasan

Hi
Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive.
Hasan

Exchange 2010 SP3 - RU3 RU4 Public Folders issues ( not refreshing ) when grouping by Categories for "(None)" Group

After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
Thx

Hi,
From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
grouping by flag.
Should you need more assistance, feel free to tell me.
Regards,
Rebecca Tu
TechNet Community Support

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Exchange 2010 SP3 Create Dynamic DL for Direct Reports

Similar Messages

Maybe you are looking for