Exchange 2010 SP3 Installation hangs Language Pack Hell

Ok, Exchange 2010 SP2 running in Hyper V on a 2012 server, and using the Server 2008 R2 as the OS, is hanging on the SP3 language pack for hours. I tried rebooting the server because I am not a vampire and will continue to waste precious
years of my life in this upgrade process as I age.
I am currently running the SP3 install again, and hope to advise, but any word on why this would hang?
Again, guest OS is server 2008 R2 running in Hyper V on Server 2012 (how I roll), and has 8 GB of Ram and using Forefront for exchange.

On Sat, 16 Feb 2013 19:35:35 +0000, wosully wrote:
>
>
>Ok, Exchange 2010 SP2 running in Hyper V on a 2012 server, and using the Server 2008 R2 as the OS, is hanging on the SP3 language pack for hours. I tried rebooting the server because I am not a vampire and will continue to waste precious years of my life
in this upgrade process as I age.
>
>I am currently running the SP3 install again, and hope to advise, but any word on why this would hang?
>
>
>
>Again, guest OS is server 2008 R2 running in Hyper V on Server 2012 (how I roll), and has 8 GB of Ram and using Forefront for exchange.
Try "run as administrator" to start the update.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Similar Messages

Exchange 2010 SP3 installation Problem

Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
Below the complete error from Exchange Setup Logs
[02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
[02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''
[02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
[02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
[02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
[02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
[02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
[02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
[02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
[02/16/2014 05:03:04.0333] [0] End of Setup
[02/16/2014 05:03:04.0333] [0] **********************************************

Hi,
As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
Based on my research, there is no Microsoft article about the hotfix of KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
Thus, to get more professional and faster help, I recommend you contact with our following support:
https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 SP3 Installation Failed. - Error While Locating Source (Windows Installer)

Hey Guys,
Urgent question here: I was trying to install SP3 for Exchange 2010. Unfortunately it failed on the install (all pre-requisites checked and passed). The problem: Windows Installer couldn't find a the exchangeserver.msi file. This happened immediately
after setup stopped the services.
I tried re-downloading the service pack and reinstalling, I got the same error. Anytime I selected the file using browse it failed and re-prompted me.
Error:
"click ok to try again or enter an alternate path to a folder containing the installation package "exchangeserver.msi" in the box below"
So here is what I did:
1) I reset all the services to automatic (the same way as before)
2) Rebooted the server
3) All Service started
4) DAG replication is working
I am going to work on figuring out how to fix the issue, however will this be a problem? will there be any data corruption? am I safe to let the server sit until I can open a ticket (if needed) ?
Thanks,
Robert
Robert

Hi,
Thank you for your question.
In order to resolve it, we could click the Browse button in the dialog box, locate the ExchangeServer.msi file, and then click OK
to continue the installation. The ExchangeServer.msi file is located on the Exchange Server 2010 installation media。
There are a referred link for us:
https://support.microsoft.com/en-us/kb/2888399
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2010 SP3 Installation Failed

I have Exchange 2010 SP2 RU8. We tried to install SP3 but continue to get a failure.
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you
have the correct upgrade.
Error code: 1642
Here is the MSI log:
=== Verbose logging started: 5/30/2014 17:44:11 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\System32\msiexec.exe ===
MSI (c) (F4:C8) [17:44:11:684]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (F4:C8) [17:44:11:684]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (F4:CC) [17:44:11:699]: Resetting cached policy values
MSI (c) (F4:CC) [17:44:11:699]: Machine policy value 'Debug' is 0
MSI (c) (F4:CC) [17:44:11:699]: ******* RunEngine:
******* Product: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}
******* Action:
******* CommandLine: **********
MSI (c) (F4:CC) [17:44:11:699]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (F4:CC) [17:44:11:699]: Cloaking enabled.
MSI (c) (F4:CC) [17:44:11:699]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (F4:CC) [17:44:11:699]: End dialog not enabled
MSI (c) (F4:CC) [17:44:11:699]: Original package ==> C:\Windows\Installer\48e783.msi
MSI (c) (F4:CC) [17:44:11:699]: Package we're running from ==> C:\Windows\Installer\48e783.msi
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: Uninstall Flags override found.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: Uninstall VersionNT override found.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (F4:CC) [17:44:11:715]: MSCOREE not loaded loading copy from system32
MSI (c) (F4:CC) [17:44:11:731]: Opening existing patch 'C:\Windows\Installer\f63d4979.msp'.
MSI (c) (F4:CC) [17:44:11:731]: Opening existing patch 'C:\Windows\Installer\596a3.msp'.
MSI (c) (F4:CC) [17:44:11:731]: Original patch ==> C:\Temp\ExchSP3_RU6.msp
MSI (c) (F4:CC) [17:44:11:731]: Patch we're running from ==> C:\Temp\ExchSP3_RU6.msp
MSI (c) (F4:CC) [17:44:11:731]: SOFTWARE RESTRICTION POLICY: Verifying patch --> 'C:\Temp\ExchSP3_RU6.msp' against software restriction policy
MSI (c) (F4:CC) [17:44:11:731]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp has a digital signature
MSI (c) (F4:CC) [17:44:11:996]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp is permitted to run at the 'unrestricted' authorization level.
MSI (c) (F4:CC) [17:44:11:996]: SequencePatches starts. Product code: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}, Product version: 14.2.247.5, Upgrade code: {A4A259AB-A77F-4039-832A-27B431DDFFEA}, Product language 1033
MSI (c) (F4:CC) [17:44:11:996]: Full optimizations are not possible in the patch sequencer because new patch[es] had been added in the current transaction.
MSI (c) (F4:CC) [17:44:11:996]: The patch sequencer will optimize its execution by not checking the applicability of applied patches.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: verifying the applicability of QFE patch C:\Temp\ExchSP3_RU6.msp against product code: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}, product version: 14.2.247.5, product language 1033 and upgrade code: {A4A259AB-A77F-4039-832A-27B431DDFFEA}
MSI (c) (F4:CC) [17:44:11:996]: Validating transform 'E14_DAT_RTMToE14_DAT_UPG' with validation bits 0x922
MSI (c) (F4:CC) [17:44:11:996]: Note: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: QFE patch C:\Temp\ExchSP3_RU6.msp is not applicable.
MSI (c) (F4:CC) [17:44:11:996]: The original #_QFESequence table:
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.375.0 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.298.4 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: The pre-sorted #_QFESequence table: - this is useful to see if patches had been ordered correctly within resultant versions and patch families
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.298.4 VersionOrder: 0
SequenceOrder: 0 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.375.0 VersionOrder: 0
SequenceOrder: 1 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: The initial #_Predecessor table:
MSI (c) (F4:CC) [17:44:11:996]: PatchFamily: E14_DAT,
PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE},
Predecessor GUID: NULL
MSI (c) (F4:CC) [17:44:11:996]: PatchFamily: E14_DAT,
PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426},
Predecessor GUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: Step 1
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: patch {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE} (PatchFamily E14_DAT) will be sequenced.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: Step 2
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: patch {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426} (PatchFamily E14_DAT) will be sequenced.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: The resulting #_OrderedGUIDs table:
MSI (c) (F4:CC) [17:44:11:996]: Patch: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
Order: 0 (Family: E14_DAT)
MSI (c) (F4:CC) [17:44:11:996]: Patch: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
Order: 1 (Family: E14_DAT)
MSI (c) (F4:CC) [17:44:11:996]: The ordered #_QFESequence table: - has the final sequence of QFEs. It lists each PatchGUID only once.
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.298.4 Order: 0
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.375.0 Order: 1
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: there's no supersedence information available, so no patches will be superseded.
MSI (c) (F4:CC) [17:44:11:996]: SequencePatches returns success.
MSI (c) (F4:CC) [17:44:11:996]: Final Patch Application Order:
MSI (c) (F4:CC) [17:44:11:996]: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE} -
MSI (c) (F4:CC) [17:44:11:996]: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426} -
MSI (c) (F4:CC) [17:44:11:996]: Other Patches:
MSI (c) (F4:CC) [17:44:11:996]: Unknown\Absent: {32539431-026C-467E-98AD-9932CAC4B304} - C:\Temp\ExchSP3_RU6.msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have
the correct upgrade.
C:\Windows\Installer\48e783.msi
MSI (c) (F4:CC) [17:44:11:996]: Product: Microsoft Exchange Server - Update '{32539431-026C-467E-98AD-9932CAC4B304}' could not be installed. Error code 1642. Additional information is available in the log file C:\Users\dgates\AppData\Local\Temp\2\MSI4736a.LOG.
MSI (c) (F4:CC) [17:44:11:996]: Windows Installer installed an update. Product Name: Microsoft Exchange Server. Product Version: 14.2.247.5. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: {32539431-026C-467E-98AD-9932CAC4B304}. Installation
success or error status: 1642.
MSI (c) (F4:CC) [17:44:11:996]: Note: 1: 1708
MSI (c) (F4:CC) [17:44:11:996]: Product: Microsoft Exchange Server -- Installation failed.
MSI (c) (F4:CC) [17:44:11:996]: Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 14.2.247.5. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1642.
MSI (c) (F4:CC) [17:44:12:011]: MainEngineThread is returning 1642
=== Verbose logging stopped: 5/30/2014 17:44:12 ===
HossFly, Exchange Administrator

As per the below log entries it seems that it is trying to install SP3 UR6 directly and failing saying its not applicable. If you are trying to install just SP3 then it shouldn't try installing UR6 at the same time so that seems strange to me...
MSI (c) (F4:CC) [17:44:11:731]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp has a digital signature
MSI (c) (F4:CC) [17:44:11:996]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp is permitted to run at the 'unrestricted' authorization level.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: verifying the applicability of QFE patch C:\Temp\ExchSP3_RU6.msp against product code: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}, product version: 14.2.247.5, product language 1033 and upgrade code: {A4A259AB-A77F-4039-832A-27B431DDFFEA}
MSI (c) (F4:CC) [17:44:11:996]: Note: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: QFE patch C:\Temp\ExchSP3_RU6.msp is not applicable.
Looks like time to re-download
SP3 and give it a try.
Blog |
Get Your Exchange Powershell Tip of the Day from here

Exchange 2013 CU6 installation hangs on step 9: Languages

Just had Exchange 2013 CU6 update hang on Step 9 of 18: Languages. It was stuck at 0% for almost an hour. I was able to get it moving forward by disabling SCEP 2012 by killing the process and deselecting check certificate for server certificate
revocation in IE. Both steps were taken nearly simultaneously and the install process for Exchange jumped up immediately. Both steps were taken based on info from:
https://social.technet.microsoft.com/Forums/exchange/en-US/2a346a37-d092-4189-8a07-e8a9971925f1/cu2-installation-hangs-on-step-9-languages?forum=exchangesvrdeploy
and
https://social.technet.microsoft.com/Forums/exchange/en-US/0975bb5e-f270-4e39-abf3-70809cd98161/exchange-2010-sp3-installation-hangs-language-pack-hell
Just wanted to post that this issue was encountered on CU6 as well. Has anyone had a similar experience or able to tell which of these two steps (or both) is actually needed?

Hello,
Thanks a lot for sharing, saved my day!
Cheers:)

Exchange 2010 SP3 mailbox role installation error

Hello.
I can't install the Mailbox role on a Windows 2008 R2 server, the first Exchange in the domain and forest (2 dcs in the domain).
Client Access Role and Hub Transport Role installed correctly.
Setup preparations - without an error.
Started the Exchange 2010 SP3 Installation, which start correctly, all prerequisites are seems to be ok. When arriving on the Mailbox Roles it make this error:
02.05.2014 13:42:46.0634] [2] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0634] [2] [ERROR] An object class violation occurred.
[02.05.2014 13:42:46.0634] [2] Ending processing enable-mailbox
[02.05.2014 13:42:46.0649] [1] The following 1 error(s) occurred during task execution:
[02.05.2014 13:42:46.0649] [1] 0. ErrorRecord: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0649] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to
include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
---> System.DirectoryServices.Protocols.DirectoryOperationException: An object class violation occurred.
   at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
   at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
   at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, IAccountingObject budget, Nullable`1 clientSideSearchTimeout)
   at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Directory.ADSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
   at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
   at Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
   at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession.Microsoft.Exchange.Data.IConfigDataProvider.Save(IConfigurable instance)
   at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalProcessRecord()
   at Microsoft.Exchange.Management.RecipientTasks.EnableMailbox.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[02.05.2014 13:42:46.0649] [1] [ERROR] The following error was generated when "$error.Clear();
          if (!$RoleIsDatacenter)
            $arbUsers = @(get-user -Filter {lastname -eq "MSExchApproval 1f05a927-3be2-4fb9-aa03-b59fe3b56f4c"} -IgnoreDefaultScope -ResultSize 1);
            if ($arbUsers.Length -ne 0)
              $mbxname = $arbUsers[0].name;
              $mbxs = @( get-mailbox -arbitration -Filter {name -eq $mbxname} -IgnoreDefaultScope -resultSize 1 );
              if ( $mbxs.length -eq 0)
                $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                if ($dbs.Length -ne 0)
                  enable-mailbox -Arbitration -identity $arbUsers[0] -database $dbs[0].Identity;
        " was run: "Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for
its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0649] [1] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0649] [1] [ERROR] An object class violation occurred.
[02.05.2014 13:42:46.0649] [1] [ERROR-REFERENCE] Id=SystemAttendantDependent___04bbd8c4a86b4d2c9403cdddf5b39579 Component=EXCHANGE14:\Current\Release\Transport\BCM\Moderated Transport
[02.05.2014 13:42:46.0649] [1] Setup is stopping now because of one or more critical errors.
[02.05.2014 13:42:46.0649] [1] Finished executing component tasks.
[02.05.2014 13:42:46.0712] [1] Ending processing Install-MailboxRole
Any help would be appreciate.
Thanks,
Igor K.

Hi,
The above error may occur when the federated built-in e-mail account that links to the computer account no longer exists or the federated built-in e-mail account in the Active Directory service is corrupted.
I recommend you follow the steps below for troubleshooting:
1. Remove the FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 e-mail account by using the ADSIEdit tool.
a. Run adsiedit.msc.
b. Locate the Default Naming Context node, and then locate to the CN=Users container.
c. Locate and then right-click the CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 container. Then, click Delete.
2.Rerun the Exchange Server 2010 Mailbox role setup application.
3.Create a new federated e-mail account by using the following cmdlet:
New-Mailbox -Arbitration -Name FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 -UserPrincipalName
FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042@<Default_Accepted_Domain>
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

Dear forum,
I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
After launching the install from an elevated command prompt, and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
I let it alone for more than an hour but nothing happens.
Launching it with /log returns this line at the end:
"InstallFiles: File: Copying new files, Directory: , Size: "
Do you have already meet this issue or do you have any idea about the cause?
Thanks for your help.

Hi Amy,
You'll find below the errors found in the rollup setup log:
DEBUG: Error 2826: Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
DEBUG: Error 2726: Action not found: PreNgenEndDlg
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
CAQuietExec: Error 0x80070001: Command line returned an error.
CAQuietExec: Error 0x80070001: CAQuietExec Failed
CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
Just tell me if you need the whole log.
Thanks

Exchange 2010 SP3, Windows 2008 R2, Windows Installer 5.0

Windows 2008 R2 uses Windows Installer 5.0
http://support.microsoft.com/kb/942288/en-us
Windows 2008 R2 is a supported OS for Exchange 2010 SP3
Why is Windows Installer 5.0 not shown as compatible with Exchange 2010 SP3?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Hi,
There is no official document about the reason Windows Installer 5.0 is not compatible with Exchange 2010 SP3 for our reference currently. We have to wait for update. Thanks for understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

Quick question.
What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
Hasan

Hi
Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive.
Hasan

Exchange 2010 SP3 upgrade

Dear Exchange admin,
We tried to upgrade Exchange 2010 SP1 to Exchange 2010 SP3 .In HQ site all preparation finished smoothly.
But in DR we are unable to do even preparation.We are getting the following error.
Please advice me how can proceed.
Summary: 4 item(s). 2 succeeded, 2 failed.
Elapsed time: 00:00:37
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Failed
Error:
Setup needs to contact the Active Directory schema master but this computer is not in the same Active Directory site as the schema master (Default-First-Site-Name).
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=2376fec1-b9ce-44db-beb6-cb9ac4788988
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain kfupm and site Default-First-Site-Name, and wait for replication to complete.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Elapsed Time: 00:00:14
Languages Prerequisites
Completed
Elapsed Time: 00:00:04
Mailbox Role Prerequisites
Failed
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain kfupm and site Default-First-Site-Name, and wait for replication to complete.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'mmc' () process (ID: 4508) has open files. Close the process and restart Setup.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'powershell' () process (ID: 3808) has open files. Close the process and restart Setup.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'mmc' (4508) process (ID: ) has 'Microsoft.Exchange.Management.SnapIn.Esm.dll' loaded. Close the process and restart setup.
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=f0d3f291-5a52-43ea-9121-24aa7cd0c30e
Warning:
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
Elapsed Time: 00:00:18
Ashraf

Hi Ashraf
Thank you for your question.
Exchange update cannot continue because the computer that is running update is not in the same Active Directory site or domain as the server that is assigned the domain schema master role, also known as flexible single master operations or FSMO.
You can refer to the following link to change exchange site schema:
http://technet.microsoft.com/en-US/us-cn/zh-hans-cn/library/2376fec1-b9ce-44db-beb6-cb9ac4788988.aspx
You also notice the order for updated:
1.Client Access servers (beginning with the internet-facing site)
2.Hub Transport and Edge Transport servers
3.Mailbox servers
4.Unified Messaging servers
You can refer to the following link to update:
http://exchangeserverpro.com/installing-exchange-server-2010-service-pack-3/
If there are any questions, please let me know.
Best Regard,
Jim

Problems with OWA after installing Exchange 2010 SP3

Hi,
I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
I did a reset for the OWA vritual directory, but nothing helps..
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
ASP.auth_logon_aspx..ctor() +17
__ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

Hi Alelieveld,
When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
After you reset the VD, did you restart IIS?
For more information, please see:
Reset Client Access Virtual Directories
http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
Frank Wang
TechNet Community Support

Exchange 2010 SP3 Update Rollup 6 breaks first OWA login (timezone selection) on SBS 2011

The Exchange 2010 SP3 Update Rollup 6 broke the OWA for Users who access OWA for the first time and have to set a timezone. They get this error:
Request
Url: https://xxxxx:443/owa/languageselection.aspx
User: xxxxxx
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxx
SMTP Address: xxxxxx
OWA version: 14.3.195.1
Exception
Exception type: System.ArgumentNullException
Exception message: Value cannot be null. Parameter name: value
Call stack
Microsoft.Exchange.Clients.Owa.Core.Utilities.RenderDirectionEnhancedValue(TextWriter output, String value, Boolean isRtl)
Microsoft.Exchange.Clients.Owa.Core.LanguageSelection.RenderTimeZoneSelection()
ASP.languageselection_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
System.Web.UI.Page.Render(HtmlTextWriter writer)
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
This Server is an SBS2011.
The update broke nothing on a "normal" 2008R2 with exchange 2010.
Uninstalling RU6 helped but thats obviously not the desired way.
Removing the RenderTimeZoneSelection() call from languageselection.aspx obviously helped but then there is no timezone dropdown displayed anymore. The timezone dropdown is working normaly in other places like ecp. Afaik this error occours only in the languageselection.aspx
file which is displayed for "new" OWA users. (Users without a timezone set)
my workaround was to set the language and timezone for these mailboxes via exchange shell.

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2010 SP3 Rollup Update 6

Our Exchange environment is currently on Exchange 2010 SP3 RU3 and the Forefront Protection 2010 for Exchange server version is 11.0.713.0 (Rollup 3).
We planning to upgrade Exchange servers and install Exchange 2010 SP3 RU6, question which I have is it Mandatory to upgrade the Forefront Protection 2010 for Exchange server version is 11.0.727.0 (Rollup 4) before we install Exchange 2010 SP3 RU6 on the
Exchange servers.
Thanks,
AJ

Thanks Adam for the prompt response and yes I recall these cmdlets to disable and there is a similar cmdlet to enable it. Also after Exchange 2010 SP2 after some RU there is no need to disable FPE before installing RU however it is recommended to disable
it.
If you refer the comments section mentioned in the blog below it talks about it:-
http://blogs.technet.com/b/exchange/archive/2014/05/27/released-update-rollup-6-for-exchange-2010-service-pack-3.aspx
If you read the comment posted by James Knoch posted on this blog which is as below,
SP3 & the Rollup Updates are not supposed to require you to disable Forefront anymore, but it doesn't hurt to be safe and disable/enable it anyways. Make sure you are running Forefront Rollup 4 (http://support.microsoft.com/kb/2619883)
& the latest security update (http://www.microsoft.com/en-us/download/details.aspx?id=41836).
Above stated confused me a bit, is it mandatory to upgrade Forefront or it is NOT.
Thanks,
AJ

Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

Hi,
Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
Thank you

I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure. If you mean "a folder that can contain calendar items", that is not a calendar
item itself.
Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?" If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
pretty unruly with the more that you have. I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
to). And anyone will tell you that you want to restrict anyone from creating their own folders at the root level. In fact, this is the default setting for a new Exchange 2010 installation.
I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

Exchange 2010 SP3 Update 7 breaks OWA for some IE11 users

I had issues earlier with OWA on some clients running Internet Explorer 11 (as
documented in this thread), and managed to resolve it by disabling compatiblity mode in IE11.
After SP3 Update Rollup 7 the issue came back, and no tinkering with the compatibility mode will solve it.
Have anyone encountered this issue before? The issue only appears on certain machines in their own AD OU as well as own subnets.

Hi,
I haven't heard that Exchange 2010 SP3 Update Rollup 7 has this issue so far. In your case, I would like to verify if you remove all interim updates for Exchange 2010 SP3 before installing Rollup 7. If no, remove it and check the result.
Here is a kb for your reference.
Update Rollup 7 for Exchange Server 2010 Service Pack 3
http://support.microsoft.com/kb/2961522
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2010 SP3 Installation hangs Language Pack Hell

Similar Messages

Maybe you are looking for