Exchange 2010 SP3 maximum journal mailbox size for performance

Hello all,
Does anyone know if there is a limit mailbox
size near 01 terabyte than
above it generates performance problems?
We have a journaling mailbox that
reached today 1.077 GB and
from there began the process very
slowly messages to store.
All (4) Exchange Hub Trasnport that try to connect to this store get an 4.32 store drive error. A new
journal mailbox was created in the same
database, and the problem was solved.
Thanks
João Paulo.
Exchange 2010 SP3 RU8 on-premisses

Hi Paulo,
Base on my knowledge, journaling mailbox as the same as any other mailbox, the maximum size depends on the data to be stored in the mailbox, the hardware resources available, and the disaster recovery requirements
for the server where the journaling mailbox is located.
If you configure journaling mailboxes without storage quotas, monitor the Mailbox server to ensure that it doesn't exceed the available hardware resources or disaster recovery capabilities.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Similar Messages

Exchange 2010 SP3 Update 7 breaks OWA for some IE11 users

I had issues earlier with OWA on some clients running Internet Explorer 11 (as
documented in this thread), and managed to resolve it by disabling compatiblity mode in IE11.
After SP3 Update Rollup 7 the issue came back, and no tinkering with the compatibility mode will solve it.
Have anyone encountered this issue before? The issue only appears on certain machines in their own AD OU as well as own subnets.

Hi,
I haven't heard that Exchange 2010 SP3 Update Rollup 7 has this issue so far. In your case, I would like to verify if you remove all interim updates for Exchange 2010 SP3 before installing Rollup 7. If no, remove it and check the result.
Here is a kb for your reference.
Update Rollup 7 for Exchange Server 2010 Service Pack 3
http://support.microsoft.com/kb/2961522
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2010 SP3 RU7 - additionals mailboxes does not refresh automatically

Hello
On Exchange 2010 SP3 RU7 , my additionals mailboxes does not refresh automatically (Outlook 2010 up-to-date).
i need to perform "send/receive" and "update the folder" to get the mail.
Primary mailbox is running correctly and new mails are displayed .
Thanks

Hi,
Based on the description, you added additional mailboxes from Outlook, but messges sent to these additional mailboxes didn't show until you tried the option "update the folder".
How many additional mailboxes did you add?
Did this issue affect all users?
If possible, please remove these additional mailboxes and then re-add them. I recommend you add one additional mailbox first to check if the issue occurs. Then you can add another additional mailbox to check result.
Best regards,
Belinda Ma
TechNet Community Support

Rollup 6 for Exchange 2010 SP3

Does anyone know when Microsoft is going to release either Rollup 6 or a patch for Exchange 2010 SP3? Rollup 3 for SP3 introduced the following issues:
“Some users (not all of them) report that they don't see new emails in their Outlook 2010 box on Shared folders, even though they got the new email message envelope. When they change folder and back to the Inbox the new mail is suddenly visible. Same sort
of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.”
We have installed Rollup 5 but it did not address the issue.
Thanks
Dave

Hi,
Currently, there is no official document about the release of RU6 for Exchange 2010 SP3. If the RU6 for Exchange 2010 SP3 will be coming, you can find this information in the Exchange Team Blog.
http://blogs.technet.com/b/exchange/
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 SP3 RU8

I am trying to rollback Exchange 2010 SP3 RU8. When I uninstall the update the installer asks for exchangeserver.msi for Exchange 2010 SP3 RU7. I downloaded RU7 from the Microsoft website. It did not accept it as the correct msi. I ran the Exchange 2010
SP3 RU7 update I download and it comes up as RU8. I need the exchangeserver.msi from Exchange 2010 SP3 RU7. Thank you for your help.

You may need the original SP3 binaries located here:
http://www.microsoft.com/en-us/download/details.aspx?id=36768
See this thread for more ideas about rolling back:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8
Update:Microsoft has released version 2 of SP3 RU8 today. The link should be live soon.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2010 SP3 outlook prompot password for linked mailbox

Hi All,
I have forest A and forest B, there is an Exchange 2010 SP3 server in forest A, linked mailboxes are created for user inside forest B. Trust relationship can be verified , in place and active. Suddenly , some linked mailbox user got outlook password prompt
repeatedly but OWA and Active Sync is still working fine.
I have reset Exchange Web Services Virtual Directory. but the issue still persists. Please advise
Regards,
Zaw
ZAW

Step 1: Close Outlook program and create backup of PST file
Step 2: Now run SCANPST.EXE on copy of your PST and repair
SCANPST.EXE is found in these locations according to different Outlook versions:
In MS Outlook 2002/XP: C:\Program Files\Common Files\System\MAPI\ \scanpst.exe
In MS Outlook 2000:C:\Program Files\Common Files\System\MAPI\ \NT\scanpst.exe
In MS Outlook 97/98:C:\Program Files\Common Files\Windows Messaging\scanpst.exe
Note: Do not use backup option in SCANPST.EXE as you working with a duplicate copy of PST
file.
Step 3: Then open the command prompt by clicking Start >> Run
Step 4: Paste or type the file path to PST19UP and your PST name: PSTUPG19.EXE-filename.pst
and press Enter.
Step 5: The command line will resemble: “C:\My Documents\pst19upg.exe”- Outlook.pst.
Step 6: A new copy of the PST file will be created, which is called “filename.psx”.
Step 7: Once you have completed, rename the original PST file.
Step 8: Now at the Command Prompt, type “pst19upg.exe- filename.psx” and press Enter
Step 9: A new password-free PST file will be created from PSX file.
Step 10: Now open your MS Outlook program and open the PST file.

Database mailbox grow quickly Exchange 2010 SP3

Hello.
Since we migrated from Exchange 2003 to
2010, the growth of our databse mailbox
is excessive. We have a total mailbox
size hovering around 75 GB and the size of
the database is 120 Gb.
Mailbox quotas are very
limited and 90% of users move emails
from mailbox to PST personal folders.
I get the impression that the space freed by removing
emails or move them to PST
is not claimed as White Space
and hence the excessive growth of
the DB.
I have seen that there is a fix to solve this
problem for versions prior to Exchange 2010
SP3 but the current version we have
implemented and it is with SP3.
Any idea to find out what is happening and
how to fix it?
Thanks in advance and best regards.
tzariksi

Hi.
I have reviewed the total size the mailboxes
and Dumpster with the following command:
Get-MailboxDatabase"MailboxDatabase"|Get-MailboxStatistics|SortTotalItemSize-desc|ftdisplayname,TotalItemSize,itemcount,TotalDeletedItemSize
The result is:
•Total Mailbox size(GB)->82,213
•Total Dumpster size(GB)->14,531
•Total ->97,344
The size of the DB using the command:
Get-MailboxDatabase-Status|Sort-ObjectDatabaseSize-Descending|Format-Table
Name,DatabaseSize,AvailableNewMailboxSpace
Is as follows:
Name
DatabaseSize                            AvailableNewMailboxSpace
MailboxDatabase         107.4 GB (115,302,531,072 bytes)        1.438 GB (1,544,486,912 bytes)
The actual disk size occupied
by the MailboxDatabase is->112GB
What else may be using the space in theMailboxDatabase?.
Thanks and regards.
Pedro.
tzariksi

Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetPropsSpecific [7]
    Lid: 21921   StoreEc: 0x40380
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetReceiveFolderTable [104]
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetAllPerUserLtids [125]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 29793
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 25738
    Lid: 18570   StoreEc: 0xFFFFFA84
    Lid: 23370   StoreEc: 0xFFFFFA84
    Lid: 24302
    Lid: 32494   StoreEc: 0xFFFFFA84
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
   at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
   at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
   at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciated

Thanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetPropsSpecific [7]
    Lid: 21921   StoreEc: 0x40380
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetReceiveFolderTable [104]
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetAllPerUserLtids [125]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 29793
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 25738
    Lid: 18570   StoreEc: 0xFFFFFA84
    Lid: 23370   StoreEc: 0xFFFFFA84
    Lid: 24302
    Lid: 32494   StoreEc: 0xFFFFFA84
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
   at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
   at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
   at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

Exchange 2010 to 2013 migration: Mailbox move requests are journaled.

Hello,
I've installed Exchange 2013 into Exchange 2010 infrastructure
[ single Exchange 2010 server; single AD site; AD = 2003 ],
Exchange 2010 has 2 databases:
1. Database with users mailboxes;    Journaling YES: Journal account.
2. Database with 1 mailbox for Journal user mentioned above:     Journaling NO.
Exchange 2013 has 1 database:
1. Database with moved users mailboxes;    Journaling YES: Journal account.
I saw that when I move mailbox from 2010 to 2013 then Journal Database INCREASES about size of MOVED MAILBOX !
I logged into Journal mailbox by OWA and didn't see any duplicate messages concerned with this mailbox user...
I'd like:
* to understand technically what happened,
* to avoid unnecessary growth of Journal Database.
I'd like not to switch off journaling for all users during mailbox move.
best regards Janusz Such

Hello Winnie,
your understanding is not correct:
I move mailboxes from first DATABASE which is journaled;
second database is dedicated solely for Journal user's mailbox and is not touched now.
Thank you for PS commands; I'll use them...
best regards Janusz Such
Hi Janusz,
Sorry for my delay. In your original posting, "I saw that when I move mailbox from 2010 to 2013 then Journal Database INCREASES about size of MOVED MAILBOX !"
My understanding is that when you move mailbox from Exchange 2010 Database 1 to Exchange 2013 database, the journal mailbox in Exchange 2010 Database 2 is incleased. Is it right?
Generally, the mailbox move would not be journaled unless there is any new email bening sent to the mailbox during the migration. Please run the commands in my original posting to check the statistics about it, and refer to Ed Crowdly's suggestion to use
Journal rule instead of database journal as a workaround.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2010 SP3 Create Dynamic DL for Direct Reports

I am not sure this is possible but if there is a will there is a way I guess.
System: Exchange 2010 SP3 on Windows Server 2008 R2
I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
Thanks.

hi,
as from above i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

List of all historical meetings and attendants - resource mailbox exchange 2010 sp3

Hi,
I'm an exchange admin, and i'm looking for a PS script of some sort to get a list of all the meetings held in a resource mailbox and its attendants.
ie: meeting room 1 -> get a list of all the meetings held there and the attendants for a period of 3 months.
Is there anybody who has experience with this ?
(Exchange 2010 sp3)u

Hi,
I recommend that you post this in Script Forum,there are more Powershell experts to help you:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2010 SP3, UR7 after BSOD. Moving mailboxes to new database

Yesterday our Exchange 2010 SP3, UR7 had an BSOD. To recover the services I was forced to do eseutil /p on all DBs.Current status is all DB's are mounted and data are accessible to users. I working on migrating mailboxes to new databases and to remove the old ones.1. I have issue with four move requests that were active during the BSOD. When I try to restart or remove them I end withEMCText--------------------------------------------------------Microsoft Exchange Error--------------------------------------------------------Action 'Remove Move Request' could not be performed on object 'Beňo Michal'.usernameFailedError:Failed to communicate with the mailbox database.MapiExceptionNotFound: Unable to open entry ID. (hr=0x80004005, ec=-1601)Diagnostic context:Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=83]Lid: 43559...
This topic first appeared in the Spiceworks Community

Registration is Now Open to Publish on PowerShell GalleryWe are excited to announce that the PowerShell Gallery will accept registration from any users who wish to publish PowerShell modules and share their work with the world.For the past year, the PowerShell Gallery has been slowly adding content from our closest community contributors, most of whom are Most Valuable Professionals (MVPs) and internal Microsoft contributors. While we were building the basic features of the PowerShell Gallery, we restricted the set of people who could publish new modules, and required an approval step before allowing users to register. This approach provided the PowerShell team with an agile feedback loop to help design and to learn what gallery experience will be optimal for the broader PowerShell community.To contribute to the gallery you simply have...

Exchange 2010 SP3 mailbox role installation error

Hello.
I can't install the Mailbox role on a Windows 2008 R2 server, the first Exchange in the domain and forest (2 dcs in the domain).
Client Access Role and Hub Transport Role installed correctly.
Setup preparations - without an error.
Started the Exchange 2010 SP3 Installation, which start correctly, all prerequisites are seems to be ok. When arriving on the Mailbox Roles it make this error:
02.05.2014 13:42:46.0634] [2] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0634] [2] [ERROR] An object class violation occurred.
[02.05.2014 13:42:46.0634] [2] Ending processing enable-mailbox
[02.05.2014 13:42:46.0649] [1] The following 1 error(s) occurred during task execution:
[02.05.2014 13:42:46.0649] [1] 0. ErrorRecord: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0649] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to
include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
---> System.DirectoryServices.Protocols.DirectoryOperationException: An object class violation occurred.
   at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
   at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
   at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, IAccountingObject budget, Nullable`1 clientSideSearchTimeout)
   at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Directory.ADSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
   at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
   at Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
   at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession.Microsoft.Exchange.Data.IConfigDataProvider.Save(IConfigurable instance)
   at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalProcessRecord()
   at Microsoft.Exchange.Management.RecipientTasks.EnableMailbox.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[02.05.2014 13:42:46.0649] [1] [ERROR] The following error was generated when "$error.Clear();
          if (!$RoleIsDatacenter)
            $arbUsers = @(get-user -Filter {lastname -eq "MSExchApproval 1f05a927-3be2-4fb9-aa03-b59fe3b56f4c"} -IgnoreDefaultScope -ResultSize 1);
            if ($arbUsers.Length -ne 0)
              $mbxname = $arbUsers[0].name;
              $mbxs = @( get-mailbox -arbitration -Filter {name -eq $mbxname} -IgnoreDefaultScope -resultSize 1 );
              if ( $mbxs.length -eq 0)
                $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                if ($dbs.Length -ne 0)
                  enable-mailbox -Arbitration -identity $arbUsers[0] -database $dbs[0].Identity;
        " was run: "Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for
its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0649] [1] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
[02.05.2014 13:42:46.0649] [1] [ERROR] An object class violation occurred.
[02.05.2014 13:42:46.0649] [1] [ERROR-REFERENCE] Id=SystemAttendantDependent___04bbd8c4a86b4d2c9403cdddf5b39579 Component=EXCHANGE14:\Current\Release\Transport\BCM\Moderated Transport
[02.05.2014 13:42:46.0649] [1] Setup is stopping now because of one or more critical errors.
[02.05.2014 13:42:46.0649] [1] Finished executing component tasks.
[02.05.2014 13:42:46.0712] [1] Ending processing Install-MailboxRole
Any help would be appreciate.
Thanks,
Igor K.

Hi,
The above error may occur when the federated built-in e-mail account that links to the computer account no longer exists or the federated built-in e-mail account in the Active Directory service is corrupted.
I recommend you follow the steps below for troubleshooting:
1. Remove the FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 e-mail account by using the ADSIEdit tool.
a. Run adsiedit.msc.
b. Locate the Default Naming Context node, and then locate to the CN=Users container.
c. Locate and then right-click the CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 container. Then, click Delete.
2.Rerun the Exchange Server 2010 Mailbox role setup application.
3.Create a new federated e-mail account by using the following cmdlet:
New-Mailbox -Arbitration -Name FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 -UserPrincipalName
FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042@<Default_Accepted_Domain>
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 sp3 single user account maximum device

Hi
I am using Exchange 2010 sp3;
I have one mailbox (like sales department) and Ten device connected this account with outlook .But ı want connect one more device this account , outlook connection   fails you have to connect to exchange (.ost)
how can ı do
Thank you in advance for your help
RunspaceId                                : 63448235-4347-4e51-846d-4e6f1a9cb7ce
IsDefault                                 : True
AnonymousMaxConcurrency                   : 1
AnonymousPercentTimeInAD                  :
AnonymousPercentTimeInCAS                 :
AnonymousPercentTimeInMailboxRPC          :
EASMaxConcurrency                         : 20
EASPercentTimeInAD                        :
EASPercentTimeInCAS                       :
EASPercentTimeInMailboxRPC                :
EASMaxDevices                             : 50
EASMaxDeviceDeletesPerMonth               :
EWSMaxConcurrency                         : 10
EWSPercentTimeInAD                        : 50
EWSPercentTimeInCAS                       : 90
EWSPercentTimeInMailboxRPC                : 60
EWSMaxSubscriptions                       : 5000
EWSFastSearchTimeoutInSeconds             : 60
EWSFindCountLimit                         : 1000
IMAPMaxConcurrency                        :
IMAPPercentTimeInAD                       :
IMAPPercentTimeInCAS                      :
IMAPPercentTimeInMailboxRPC               :
OWAMaxConcurrency                         : 5
OWAPercentTimeInAD                        : 30
OWAPercentTimeInCAS                       : 150
OWAPercentTimeInMailboxRPC                : 150
POPMaxConcurrency                         : 20
POPPercentTimeInAD                        :
POPPercentTimeInCAS                       :
POPPercentTimeInMailboxRPC                :
PowerShellMaxConcurrency                  : 18
PowerShellMaxTenantConcurrency            :
PowerShellMaxCmdlets                      :
PowerShellMaxCmdletsTimePeriod            :
ExchangeMaxCmdlets                        :
PowerShellMaxCmdletQueueDepth             :
PowerShellMaxDestructiveCmdlets           :
PowerShellMaxDestructiveCmdletsTimePeriod :
RCAMaxConcurrency                         : 20
RCAPercentTimeInAD                        : 5
RCAPercentTimeInCAS                       : 205
RCAPercentTimeInMailboxRPC                : 200
CPAMaxConcurrency                         : 20
CPAPercentTimeInCAS                       : 205
CPAPercentTimeInMailboxRPC                : 200
MessageRateLimit                          :
RecipientRateLimit                        :
ForwardeeLimit                            :
CPUStartPercent                           : 75
esat erol yağcı Maltepe bilgi işlem

Hi ,
Please check the below mentioned thread .
https://social.technet.microsoft.com/Forums/office/en-US/b303e2a8-d650-47e1-9a1f-13f7d06d3e0b/single-mailbox-opened-in-multipul-outlook-clients?forum=exchangesvrgeneral
Thanks & Regards S.Nithyanandham

Support Forefront Protection 2010 for Exchange 2010 SP3

Hi
I have a simple question: Is there a full support of FPE 2010 (Version 11.0.727.0) for Exchange 2010 SP3 (and Rollup Updates)?
Thomas

Hi,
It seems that FPE 2010 for exchange 2010 SP3 is supported and you need to install the Rollup 4. For more detailed information, please refer to the link below:
Hotfix Rollup 4 for Microsoft Forefront Protection for Exchange
Updates for Microsoft Forefront and Related Technologies
Hope this helps!
Susie

Exchange 2010 SP3 maximum journal mailbox size for performance

Similar Messages

Maybe you are looking for