Exchange 2010 SP3 RU 6 failed to install 1603

I just finished installing SP3 and trying to update to RU6 using the same admin account. It's failing and rolling back on both our servers. Event Viewer says:
Product: Microsoft Exchange Server - Update 'Update Rollup 6 for Exchange Server 2010 Service Pack 3 (KB2936871) 14.3.195.1' could not be installed. Error code 1603. Additional information is available in the log file c:\ExchangeSetupLogs\rollup.log.
I ran it again and logged the process. I can't seem to find a clue in the logs though. The log file is large so I can't paste it here but I've posted it here: https://onedrive.live.com/redir?resid=BA13E92AD70E1535!244&authkey=!AAdjDtNao_v0pL0&ithint=file%2c.log

Hello,
I check the setup logs and find the error code 2826. The may indicate a problem with MSI package. To find more specific cause, I recommend you enable MSI verbose logging. You can refer to the "Method 2:Set a Registry Value" section to enable MSI verbose
logging.
http://technet.microsoft.com/en-us/library/ff772434(v=exchg.80).aspx
Additional article for your reference.
http://blogs.msdn.com/b/astebner/archive/2005/08/01/446328.aspx
Cara Chen
TechNet Community Support

Similar Messages

  • Exchange 2010 sp3 rollup 7 fails

    Exchange 2010 sp3 rollup 7 fails. This is ran at an elevated prompt and the UAC off. This server is also logged in as the domain Administrator account. 
    The server currently has rollup 4 SP3 installed. I'm wondering if I should uninstall it, reboot then try the Rollup 7 SP3 update?

    Hi,
    Can you please post the error?
    At the same time please check these.
    http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
    http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

    We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
    message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380   
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793  
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753  
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738  
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302  
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source"
    This is happening on every mailbox we attempt to move. Any help would be appreciated

    Thanks for responding
    I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
    We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
    Here is the entire message from the log:
    11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
    6.0 (Build 7654.0).
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
    Regular Items: 20, 1.906 MB (1,998,818 bytes)
    Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
    FAI Items: 20, 0 B (0 bytes)
    FAI Deleted Items: 0, 0 B (0 bytes)
    11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
    11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380  
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793 
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753 
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738 
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302 
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source
    Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
    PropTags: [ContainerHierarchy; ContainerContents]
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

  • Exchange 2010 SP3 - retention policy fails to expire any messages that existed in Deleted Items prior to implementing retention policy

    I created retention policies that are working as expected for Inbox, Sent and Drafts folders. However, I created a similar policy for Deleted Items: (New-RetentionPolicyTag “test-DeletedItems-Retention” –Type DeletedItems –Comment “Items older than
    90 days are deleted” –RetentionEnabled $true –AgeLimitForRetention 90 –RetentionAction PermanentlyDelete). The messages that existed in the Deleted Items folder prior to implementing the policy do not appear to have any retention policy applied to them, so
    it appears that they will retain in Deleted Items indefinitely.
    Please advise.
    Sincerely
    Derek Bain

    Will,
    Please see the results below. The output is similar for the 3 other tags that I created for Inbox, Sent, and Drafts.
    Sincerely
    Derek
    [PS] C:\scripts>Get-RetentionPolicyTag "test-DeletedItems-Retention" | Fl
    RunspaceId                      : 3d1ea5eb-30e7-4dcf-8f65-8dcac9bbefe1
    MessageClassDisplayName         : All Mailbox Content
    MessageClass                    : *
    Description                     : Managed Content Settings
    RetentionEnabled                : True
    RetentionAction                 : PermanentlyDelete
    AgeLimitForRetention            : 90.00:00:00
    MoveToDestinationFolder         :
    TriggerForRetention             : WhenDelivered
    MessageFormatForJournaling      : UseTnef
    JournalingEnabled               : False
    AddressForJournaling            :
    LabelForJournaling              :
    Type                            : DeletedItems
    SystemTag                       : False
    LocalizedRetentionPolicyTagName : {}
    Comment                         : Items older than 90 days are deleted
    RetentionId                     : ead62b76-f54e-4981-b177-e3e24d0793a4
    LocalizedComment                : {}
    MustDisplayCommentEnabled       : False
    LegacyManagedFolder             :
    AdminDisplayName                :
    ExchangeVersion                 : 1.0 (0.0.0.0)
    Name                            : test-DeletedItems-Retention
    DistinguishedName               : CN=test-DeletedItems-Retention,CN=Retention Policy Tag Container,CN=XXXXXXXXXXXXXXXX
                                      DC=com
    Identity                        : test-DeletedItems-Retention
    Guid                            : ead62b76-f54e-4981-b177-e3e24d0793a4
    ObjectCategory                  : XXXXXXXXXXXXX/Configuration/Schema/ms-Exch-ELC-Folder
    ObjectClass                     : {top, msExchELCFolder}
    WhenChanged                     : 4/3/2014 8:49:44 AM
    WhenCreated                     : 4/3/2014 8:49:44 AM
    WhenChangedUTC                  : 4/3/2014 12:49:44 PM
    WhenCreatedUTC                  : 4/3/2014 12:49:44 PM
    OrganizationId                  :
    OriginatingServer               : XXXXXXXXXXXXX
    IsValid                         : True

  • Exchange 2010 SP3 Installation Failed. - Error While Locating Source (Windows Installer)

    Hey Guys,
    Urgent question here:  I was trying to install SP3 for Exchange 2010. Unfortunately it failed on the install (all pre-requisites checked and passed). The problem: Windows Installer couldn't find a the exchangeserver.msi file. This happened immediately
    after setup stopped the services.
    I tried re-downloading the service pack and reinstalling, I got the same error. Anytime I selected the file using browse it failed and re-prompted me.
    Error:
    "click ok to try again or enter an alternate path to a folder containing the installation package "exchangeserver.msi" in the box below"
    So here is what I did:
    1) I reset all the services to automatic (the same way as before)
    2) Rebooted the server
    3) All Service started
    4) DAG replication is working
    I am going to work on figuring out how to fix the issue, however will this be a problem? will there be any data corruption? am I safe to let the server sit until I can open a ticket (if needed) ?
    Thanks,
    Robert
    Robert

    Hi,
    Thank you for your question.
    In order to resolve it, we could click the Browse button in the dialog box, locate the ExchangeServer.msi file, and then click OK
    to continue the installation. The ExchangeServer.msi file is located on the Exchange Server 2010 installation media。
    There are a referred link for us:
    https://support.microsoft.com/en-us/kb/2888399
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Unable to install rollup4 for Exchange 2010 SP3

    Hi,
    I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
    I know that this process will take some time to complete but I have waited 10 hours.
    I've tried to reboot the server and restart the setup.
    Exchange is functioning perfectly otherwise.
    Any help would be greatly appreciated :)
    /Søren Emig

    Hi,
    I recommend you check if the anti-virus has been disabled before you start the upgrade process.
    If you didn't ,the update could fail or take an extended amount of time. 
    Also, disable all other third-party apps/plugins that might be installed (like backup agents).
    In addition,the following articles for your reference:
    Install the Latest Update Rollup for Exchange 2010
    When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
    CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
    The installation takes a long time to complete.
    You receive the following message during the installation: Creating native images for .Net assemblies
    When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
    To work around this issue and to reduce installation times, turn off the
    Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
    Start Internet Explorer.
    On the Tools menu, click Internet Options.
    Click the Advanced tab, and then locate the Security section.
    Clear the Check for publisher’s certificate revocation check box, and then click
    OK.
    After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
    Generating NGEN images takes longer than expected
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Exchange 2010 recovery after a failed service pack install

    Hi all,
    I have a question on Exchange 2010 SP3 installation and hope someone can help.
    If the installation for some reason failed, Microsoft's article said one can use "setup /m:recoverserver" to recover Exchange. My question is if Exchange 2010 is to be recovered on the SAME server, do I still need to reset the computer account
    in AD first?
    Thanks in advance.

    If you do not recover the OS on the system, you needn't reset the computer account.  I'll caution you, though, that if you intend to re-install Exchange onto the same server without reloading the OS, you are running the risk of having the same problem
    happen again.  For safety's sake, recover the OS and reset the computer account.
    When we upgraded one of our servers to SP2, we had a failure in the install, and Exchange was effectively wiped from the system.  We had to do just what you are asking about - and we reloaded the servers, from the ground up.  It's been working
    fine since then, including when we just upgraded from SP2 to SP3 (UR5, in case anyone wants to know).

  • Exchange 2010 SP3 install

    Hi,
    I am running with Exchange 2010 SP1 in DAG & CAS/HUB in cluster mode. need to upgrade to SP3. few things need to know
    1. Schema upgrade will be done I as read in the article. can this create any issue? what is the best measure to safeguard any problems of schema upgrade. Do we do this along with exchange setup or we should run schema upgrade prior to install exchange 2010
    SP3?
    2. Any impact on active sync, outlook anywhere & HUB connectors side post SP3?
    3. Do we need to take any exchange related backups as we are running mailbox, CAS/HUB servers in redundant mode?
    Please share your experiences.
    Regards,
    VIpin

    Hello,
    1. It is a good practice to run schema updates before launching Exchange update. You should also make backups of your domain controllers before any schema updates because these
    particular changes cannot be rolled back easily.
    3. Yes, you should have backups (tested!) of your Exchange servers. Server's redundancy (DAG's, CAS Arrays etc) doesn't protect your servers if the update fails.
    Hope it helps,
    Adam
    www.codetwo.com
    If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
    find the answer faster.

  • Install Exchange 2010 Sp3 on Windows 2012 R2

    Dear All,
    From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
    that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
    http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
    Thank you

    The prerequisite check is checking that the required Windows components are installed.  Exchange 2010 is still not supported on Windows Server 2012 R2.

  • Is WMF3 or WMF4 supported in Exchange 2010 SP3 UR5 installed on Server 2008 R2 SP1?

    We'd like to upgrade WMF (aka powershell) on our Exchange 2010 servers but I haven't been able to find any updated information on support with the most recent servicepack/update rollup.
    Is installing WMF3 or WMF4 supported on Server 2008 R2 SP1 w/ Exchange 2010 SP3 UR5?

    WindowsPowerShell 3.0 is supported. Haven't seen 4.0 running for exchange 2010 on 2008 R2
    http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/30/weekend-scripter-wmf-powershell-and-exchange-server-compatibility.aspx
    http://blog.crayon.no/blogs/janegil/archive/2013/11/17/how_2D00_to_2D00_install_2D00_windows_2D00_powershell_2D00_4_2D00_0.aspx
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Gulab,
    Where did you read that WMF3 is supported on Exchange 2010 SP3 on Server 2008 R2?
    Neither of the links you pasted suggest that and in fact explicitly say "There has been no testing with ExchangeServer 2010 SP3 and WMF 3.0 installed on Windows Server 2008 R2."
    My Bad, that was TYPO...
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Problems with OWA after installing Exchange 2010 SP3

    Hi,
    I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
    I did a reset for the OWA vritual directory, but nothing helps..
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
    ASP.auth_logon_aspx..ctor() +17
    __ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
    System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
    System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
    System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

    Hi Alelieveld,
    When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
    After you reset the VD, did you restart IIS?
    For more information, please see:
    Reset Client Access Virtual Directories
    http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
    Frank Wang
    TechNet Community Support

  • Exchange 2010 SP3 and UR6 Query - Order of Install

    hi,
    I need to update my Exchange 2010 SP2 Servers to SP3 and Update Rollup 6.
    Can someone confirm the update order for me?
    I have 5 servers;
    Live Data Centre:
    2 x HUB / CAB (Using Windows NLB)
    2 x Mailbox (DAG)
    Disaster Recovery:
    1 x Multi-Role Server (CAS / HUB and Mailbox) - this is also Part of the DAG
    Two Questions:
    1.) What is the Order in which I install SP3 on these Servers? Should it be Live Data Centre: HUB / CAS, Mailbox Servers and THEN the Multi-Role Server at DR?
    2.) When Upgrading each server, should I do SP3, reboot, check and THEN install Update Rollup 6 - or should I upgrade all Servers to SP3 and then start the process again to get to Update Rollup 6?
    Thanks in advance for your help with this query.
    Regards,
    Adam

    1) Internet facing CAS first in each AD site. Order: CAS> HUB> UM> MBX
    2) Personally, I would install SP3, reboot, then install SP6, but its really up to you.
    http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
    Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How do I know which update rollup is installed on my exchange 2010 sp3 server ?

    how do I know which update rollup version is installed on my exchange 2010 sp3 server ?
    Anand_N

    And take a peek here:
    http://blogs.technet.com/b/rmilne/archive/2013/10/29/how-to-check-exchange-2010-ru-version.aspx
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • SME 7.1 not working with Exchange 2010 SP3 UR8v2 and OnTap 8.2.3 7mode

    Followed IMT and installed software that NetApp said would work.Ontap 8.2.3 7-modevmWare 5.0 SP3Microsoft Windows Server 2008 R2 SP1Exchange 2010 SP3 UR8v2NetApp Host Tools 6.0.2SnapDrive 7.1.1SME 7.1 Everything connects fine.  SnapDrive sees my drives.  SME connects to Exchange Server.  However in the process of configuring SME, I get the following error.  I have followed knowledge base article and increased the timeout of DFM connection in registry, but that has not solved the problem.  Has anyone run into this before?  SME 6.1 works fine, but is not compatible with SnapDrive 7.1.1 (causes verifications to fail because server can't mount clone) and lower SnapDrive versions are not compatible with Ontap 8.2.3.  I am in a real bind here. Thanks in advance. 

    the following configuration for SME 7.1 is no longer supported: Windows Server 2008 R2Exchange 2010 SP3 RU1 – RU5WMF/PowerShell 3.0SME 7.1 The supported configuration will now be: Windows Server 2008 R2Exchange 2010 SP3 RU5WMF/PowerShell 4.0SME 7.1 this is because Microsoft does not support WMF 3.0 on Server 2008 R2 running Exchange 2010 SP3, with any RU version.SME 7.1 requires a minimum of PowerShell 3.0 (part of WMF 3.0) in order to run. Feel free to review the Exchange Server Supportability Matrix located here: https://technet.microsoft.com/en-us/library/ff728623%28v=exchg.150%29.aspx. All existing documentation (ISG, Admin Guide, IMT) will be updated shortly to reflect this change in requirements. hope that helps,Domenico.

Maybe you are looking for

  • ¿Can I still use CC applications after 1 year commitment?

    Well, I am almost ready to start an annual subscription for the creative cloud, but I have a question about what will happen after the 1 year commitment: After I have paid 1 year of subscription, that means: 12 x US$49.99 = US$600, and I cancel the s

  • Get name and type of data in an object?

    Hello, I would like to know if there is a way of getting the names and types of data encapsulated by a labview object? For example, lets say I make a simple object, called myObject to be unoriginal, with private data: myObjectName (string), myObjectV

  • My two right hot corners stopped working

    The two right hand hotcorners of my Macbook Pro stopped working 2 days ago. The left hotcorners work fine, as the right ones did, but suddenly nothing. I already tried the thing with erasing the dock file from the library and restarting the laptop, b

  • Lost purchased apps after computer backup

    replaced macbook hard-drive bought new apps on itunes through iphone and through macbook. needed to do a clone restore of macbook hard-drive as new drive was having issues macbook hard drive successfully restored and all was good connected iphone to

  • I phone 3g and I tunes transfer

    I downloaded several songs to my iphone fom itunes...when i went to itunes from my desktop i did the update to my phone before i transferred my music over and i lost lost the songs that i downloaded.. Do anyone know how I can retrieve my music...