Exchange 2010 SP3 RU5 automapping issue - fixed in later RU?

Current Level: Exchange 2010 SP3 RU1
I'm planning on updating to RU8v2 but discovered
this thread indicating issues with RU5 + automapping + Office 2010 SP1. I couldn't find anyone reporting that the later RUs introduced the same issue or fixed it. So I'm just looking for anyone that may have experience with updating
past RU5 and still running Outlook 2010 SP1, did you see the same behavior with automapped mailboxes?

That should have been done last October
http://blogs.technet.com/b/rmilne/archive/2014/10/14/office-2010-sp2-you-did-upgrade-right.aspx
take a peek at that post and sign up for the lifecycle status updates please.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Exchange 2010 SP3 RU5 on 2012 r2 - yei or nei

Guys, one question:
On this link:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
I see that Exchange 2010 SP3 with RU5 is not supported on 2012 r2 and is only supported on 2012 server.
One dumb question: But what if you have 2012 r2 domain controller, can you put exchange 2010 sp3 ru5 there?
bostjanc

Ok, but even if that worked for you it doesn't mean that it is supported (because its not) and it wouldn't be a good idea to put that server in production. If your plan is to stay on Exchange 2010, then you should install it on a supported OS.
Martina Miskovic

Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
2010 SP3 RU5+ and Powershell 4 are compatible. But, there is very little actual discussion about how well that works.
I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates.
Can I get a summary of the caveats and benefits from someone who has actually done this in a
real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?
Also, how has this affected EMC operations?
As always thank you in advance!

I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present. Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host. For example, calling the ActiveDirectory
module from EMS on an Win 2012 server (ps 3.0) fails.
I'll double check the extent of this scenario and get back to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

Dear forum,
I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
After launching the install from an elevated command prompt, and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
I let it alone for more than an hour but nothing happens.
Launching it with /log returns this line at the end:
"InstallFiles: File: Copying new files, Directory: , Size: "
Do you have already meet this issue or do you have any idea about the cause?
Thanks for your help.

Hi Amy,
You'll find below the errors found in the rollup setup log:
DEBUG: Error 2826: Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
DEBUG: Error 2726: Action not found: PreNgenEndDlg
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
CAQuietExec: Error 0x80070001: Command line returned an error.
CAQuietExec: Error 0x80070001: CAQuietExec Failed
CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
Just tell me if you need the whole log.
Thanks

Exchange 2010 SP3 startdagservermaintenance.ps1 issues

My Environment is as follows:
Production
Server 1 - CAS, Hub Transport (DAG witness server)
Server 2 - Mailbox (3 databases - DAG with Server 3) - Currently at SP1
DR Site
Server 3 - Mailbox, Hub Transport
I have Exchange 2010 SP3 applied to server 1 and 3. I have not been able to successfully run
StartDagServerMaintenance.ps1 on Server 2. If I am ok with downtime, is there any risk in upgrading my server without running this script? If so, would I need to power off Server 1 and 3 first? I believe my issue with the script may
be due to a journal mailbox.

I assume you are talking about Updating Mailbox Server or you are just testing the script?
No you don't have to shutdown the server.
About the script, its suggestion to run it, but even if you are not running its ok.
By the way, how you are running the script? Are you running from the location where the script is residing.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

Hi All.
This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email
But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests.
I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second.
From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
see in Android Logcat the problem always related to this PING command
10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
10-07 08:12:38.904 D/Exchange(31971): created outputstream
10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

Hi ronaldosy,
How about the work flow of Outlook or OWA on PC internally/externally?
If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Best Regards,
Allen Wang

Exchange 2010 SP3, RU5 - Massive Transaction Log File Generation

Hey All,
I am trying to figure out why 1 of our databases is generating 30k Log Files a day! The other one is generating 20K log files a day. The database does not grow in size as the log files are generated, the problem is log file generation.
I've tried running through some of the various solutions out there, reviewed message tracking logs, rpc client access logs, IIS Logs - all of which show important info, but none of which actually provide the answers.
I Stopped the following services to see if that would affect the log file generation in any way, and it has not!
MS Exchange Transport
Mail Submission
IIS (Site Stopped in IIS)
Mailbox Assistants
Content Indexing Service
With the above services stopped, I still see dozens (or more) log files generated in under 10 minutes, I also checked mailbox size reports (top 10) and found that several users mailboxes were generating item count increases for one user of
about 300, size increases for one user of about 150Mb (over the whole day).
I am not sure what else to check here? Any ideas?
Thanks,
Robert
Robert

Hmm - this sounds like an device is chewing up the logs.
If you use log parser studio, are there any stand out devices in terms of the # of hits?
And for the ExMon was that logged over a period of time? The default 60 second window normally misses a lof of stuff. Just curious!
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Rhoerick,
Thanks for the response. When checking the logs the highest number of hits were the (Source) Load Balancers, Port 25 VIP. The problem i was experience was the following:
1) I kept expecting the log file generation to drop to an acceptable rate of 10~20 MB Per Minute (Max). We have a large environment and use the exchange sevrers as the mail relays for the hated Nagios monitoring environment
2) We didn't have our enterprise monitoring system watching SMTP traffic, this is being resolved.
3) I needed to look closer at the SMTP transport database counters, logs, log files and focus less on the database log generation, i did do some of that but not enough of that.
4) My troubleshooting kept getting thrown off due to the monitoring notifications seeming to be sent out in batches (or something similar) stopping the transport service for 10 ~ 15 minutes several times seemed to finally "stop the transactions logs
from growing at a psychotic rate".
5) I am re-running my data captures now that i have told the "Nagios Team" to quit killing the exchange servers, with their notifications, sometimes as much as 100+ of the same notifications for the same servers, issues. so far at a quick glance
the log file generation seems to have dropped by about 30%.
Question: What would be the best counters to review in order to "Put it all together"? Also note: our Server roles are split, MBX and CAS/HT.
Robert
Robert

Exchange 2010 SP3 Rollup 6 issue with Forefront

This rollup, 2936871, when installed on a server having Forefront Protection for Exchange Server integrated with Exchange services, causing Information Store not starting. For this we have to disable the integration and start the services. When again you
try to integrate and start the services, Exchange services will not start. So you should not integrate Forefront with Exchange services at all, finally.
Has anybody already in this soup?
Whether Microsoft has checked this? Any solution?
The error events are the below two:
Log Name:      Application
Source:        MSExchangeIS
Event ID:      9581
Task Category: Virus Scanning
Level:         Error
Keywords:      Classic
Description:
Error code 1 returned from virus scanner initialization routine. Virus scanner was not loaded.
Log Name:      Application
Source:        MSExchangeIS
Event ID:      9564
Task Category: General
Level:         Error
Keywords:      Classic
Description:
Error 0x1 starting the Microsoft Exchange Information Store.
Failed to start virus scan.

Hi,
Hotfix Rollup 3 for Microsoft Forefront Protection for Exchange can address the issue that the Exchange Information store crashes with Forefront Protection for Exchange installed. I recommend you install Hotfix Rollup 3 for Microsoft Forefront Protection
for Exchange to check the result.
Here is a related article for your reference.
Description of Hotfix Rollup 3 for Microsoft Forefront Protection for Exchange
http://support.microsoft.com/kb/2538719/en#Fix4
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 SP3 RU 5 - Event id 4999

We have Exchange 2010 SP3 RU5 with four CAS/HT and five mailbox servers. We get tons of event 4999 on the four CAS/HT during the last weeks:
Watson report about to be sent for process id: 6456, with parameters: E12, c-RTL-AMD64, 14.03.0178.000, AirSync, MSExchange ActiveSync, Microsoft.Exchange.Data.Storage.GlobalObjectId.IsForeignUid, UnexpectedCondition:NullReferenceException, 54b1, 14.03.0178.000.
ErrorReportingEnabled: False
We have 10000+ mailboxes and no problem with activesync has been reported. I increased diagnostic logging of activesync to "expert" without getting more details about this. I have also restarted all four CAS/HT servers but event 4999 is
still there.
Any ideas?

Thanks for your reply Willard Martin
This event is also from MSExchange Common and the process id 6456 referred to in the event text is w3wp.exe.
I also checked both your links but they are not similar to my problem. The first of your links is about "System.IndexOutOfRangeException" and doesn't seem to have anything to do with ActiveSync. The second is about ActiveSync but with another kind
of error: "UnexpectedCondition:ArgumentNullException".
My error text is "UnexpectedCondition:NullReferenceException"

Exchange 2010 SP3 Rollup 8v2 causes client connectivity issues

I installed SP3 Rollup 8v2 this weekend, going from 7. Since then we are having random client connectivity issues. New profiles can't be created, and some users can't access resources when booking meetings. We can do a registry fix to their machines to add
a DS Server, but this is a workaround only. I have uninstalled the Rollup 8v2 and we are still having the issue.
I thought 8v2 was supposed to fix this issue!

Hi,
According to your post, I understand that outlook client cannot connect to Exchange server to configure profile and cannot get list of resources room when upgrade to Exchange 2010 SP3 Rollup 8v2, the temporary solution is that specify the DC in registry.
If I misunderstand your concern, please do not hesitate to let me know.
Is there error message when configure Outlook failed?
Please run Test E-mail AutoConfiguration and Outlook connection status to double confirm the URL and FQDN of Exchange server.
As additional, please run below command to double check the state of Exchange system component:
Get-ServerComponentstate -Identity “servername”
If the state is Inactive, please run below command to active relevant component:
Set-ServerComponentState <Identity> -Component “component name” -Requester HealthAPI -State Active
More details about Server Component States in Exchange, for your reference:
http://blogs.technet.com/b/exchange/archive/2013/09/26/server-component-states-in-exchange-2013.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Removed Exchange 2010 SP3 Rollup 8; some clients still having Outlook issues

We have removed Exchange 2010 SP3 Rollup 8 and rebooted the Exchange servers; but some Outlook clients are still experiencing the issues where calendar appointments can't be saved. They get "the item cannot be saved to this folder. The folder was deleted
or moved or you do not have permission." Then "the operation failed". Everyone has created new Outlook profiles. This fixes some computers; but not all. This is happening on Windows 7 with Office 2010 and Windows 8.1 with Office 2010.
Does anyone have a fix?
Thanks!
Mary Cato

Hi Mary,
Is there the same issue when using OWA ?
If OWA is ok, except recreate outlook profile, I also recommend you try moving mailboxes to another database and check if any helps.
Best regards,
Niko Cheng
TechNet Community Support

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

Exchange 2010 SP3 DAG Flip Flop File Share Witness Issue

Hi All,
We are facing one strange issue with Exchange 2010 SP3.
Our environment is as below
a single DAG spanned accross 2 AD sites with 6 MBX server.
Each site have 3 MBx server.
File Share Witness is on Hub server in primary site.
Note: The DAG IP is from Primary DC VLAN and which cant be streched accross DC due to network restrictions/limitations.
It was working fine till date.
But, yesterday onwards we are facing issue.
All DB dismounted and DAG name disappear from EMC and while doing refresh its giving error as below
Exception type: Microsoft.Exchange.Data.DataValidationException
Exception message: Could not convert property WitnessServer to type UncFileSharePath. Error while converting string 'vesthub700.mydomain.com\DAG1.mydomain.com' to result type Microsoft.Exchange.Data.UncFileSharePath: "vesthub700.mydomain.com\DAG1.mydomain.com"
is not an acceptable path. You must use an absolute, local, long file path, that doesn't contain '~', or a UNC path. Parameter name: path
We are not able to execute any cmdlets related to databaseavailabilitygroup from EMS and its giving same error.
Failover Cluster DAG resource is Flip/Flip continuously.
Its only become stable after reboot of the hub server holding FSW and the 1st mailbox server.(Cluster Owner)
We are even not able to move cluster group to different server.
Performed ExBPA no such issues found which related to DAG.
Performed clsuter validation.
Only generic cluster events in Mailbox servers.
Observation:
Its only become stabe if we remove the msExchFileShareWitness Value for DAG1 using ADSIEdit.
And the problem recurs if we set it back again.
Any help or suggestion is appreciated.
Thanks,
soumen
Soumen Ghosh

Hi Belinda,
Thanks! I have checked the Mailbox Server Application Log and found few 2155 Event Id generated at the time of the issue occured.
Process Microsoft.Exchange.ServiceHost.exe () (PID=9312). Configuration object CN=DAG1,CN=Database Availability Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=xxxxxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=mydomain,DC=com
read from DCTDK35.mydomain.com failed validation. DataValidationException will be thrown. Set event logging level for Validation category to Expert to get additional events about each failure.
One update is that the DAG is stable now after we set an alternate FSW last night.
Regarding the 2nd IP assignment for DAG for the 2nd subnet, we have gone through technet and other sites which refering to add the same from EMC or EMS.
Is it sufficinet to simply adding the 2nd IP to DAG from EMC or EMS? Or do we need to take any other special consideration.
Also, adding another IP it will create one more IP address resource to Failover Cluster, but I belive at a time both the IP wont be online. Do we need to keep it offline manually or its automatically taken care by Exchange.
Please suggest.
Also, regarding executing the CollectOverMetrics.ps1 we are following
http://www.msexchange.org/articles-tutorials/exchange-server-2010/monitoring-operations/monitor-dag-database-failover.html
but failed to execute. Can you suggest the correct parameter.
Thanks,
Soumen
Soumen Ghosh

Exchange 2010 SP3 - RU3 RU4 Public Folders issues ( not refreshing ) when grouping by Categories for "(None)" Group

After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
Thx

Hi,
From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
grouping by flag.
Should you need more assistance, feel free to tell me.
Regards,
Rebecca Tu
TechNet Community Support

Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook. It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email. I easily replicated
this issue. For reference:
Exchange 2010 SP3 RU3
Windows 7 x64 Ent
Outlook 2013 (15.0.4551.1004) 32-bit
I do see that SP3 RU4 has been released, however the only change listed is a security patch.
Thank you for any ideas.

Hi, Everyone –
This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
over half a year. It was not fixed in the updates for Patch Tuesday this week.
I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
– I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all.
The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
Regards,
IT Helper

Exchange 2010 SP3 RU5 automapping issue - fixed in later RU?

Similar Messages

Maybe you are looking for