Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

Dear forum,
I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
I let it alone for more than an hour but nothing happens.
Launching it with /log returns this line at the end:
     "InstallFiles: File: Copying new files,  Directory: ,  Size: "
Do you have already meet this issue or do you have any idea about the cause?
Thanks for your help.

Hi Amy,
You'll find below the errors found in the rollup setup log:
DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
cannot find the file specified. (Exception from HRESULT: 0x80070002)
CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
DEBUG: Error 2726:  Action not found: PreNgenEndDlg
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
CAQuietExec:  Error 0x80070001: Command line returned an error.
CAQuietExec:  Error 0x80070001: CAQuietExec Failed
CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
Just tell me if you need the whole log.
Thanks

Similar Messages

  • Exchange 2010 SP3 RU5 on 2012 r2 - yei or nei

    Guys, one question:
    On this link:
    http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
    I see that Exchange 2010 SP3 with RU5 is not supported on 2012 r2 and is only supported on 2012 server.
    One dumb question: But what if you have 2012 r2 domain controller, can you put exchange 2010 sp3 ru5 there?
    bostjanc

    Ok, but even if that worked for you it doesn't mean that it is supported (because its not) and it wouldn't be a good idea to put that server in production. If your plan is to stay on Exchange 2010, then you should install it on a supported OS.
    Martina Miskovic

  • Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

    The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
    2010 SP3 RU5+ and Powershell 4 are compatible.  But, there is very little actual discussion about how well that works. 
    I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates. 
    Can I get a summary of the caveats and benefits from someone who has actually done this in a
    real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?  
    Also, how has this affected EMC operations?  
    As always thank you in advance!  

    I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present.  Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host.  For example, calling the ActiveDirectory
    module from EMS on an Win 2012 server (ps 3.0) fails.
    I'll double check the extent of this scenario and get back to you.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Exchange 2010 SP3 RU5 automapping issue - fixed in later RU?

    Current Level: Exchange 2010 SP3 RU1
    I'm planning on updating to RU8v2 but discovered
    this thread indicating issues with RU5 + automapping + Office 2010 SP1.  I couldn't find anyone reporting that the later RUs introduced the same issue or fixed it.  So I'm just looking for anyone that may have experience with updating
    past RU5 and still running Outlook 2010 SP1, did you see the same behavior with automapped mailboxes?

    That should have been done last October
    http://blogs.technet.com/b/rmilne/archive/2014/10/14/office-2010-sp2-you-did-upgrade-right.aspx
    take a peek at that post and sign up for the lifecycle status updates please.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

    Hi All. 
    This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email 
    But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests. 
    I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second. 
    From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
    see in Android Logcat the problem always related to this PING command 
    10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
    10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
    10-07 08:12:38.904 D/Exchange(31971): created outputstream
    10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
    10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
    10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
    10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
    10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
    10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected]  u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

    Hi ronaldosy,
    How about the work flow of Outlook or OWA on PC internally/externally?
    If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
    Best Regards,
    Allen Wang

  • Exchange 2010 SP3, RU5 - Massive Transaction Log File Generation

    Hey All,
    I am trying to figure out why 1 of our databases is generating 30k Log Files a day! The other one is generating 20K log files a day. The database does not grow in size as the log files are generated, the problem is log file generation.
    I've tried running through some of the various solutions out there, reviewed message tracking logs, rpc client access logs, IIS Logs - all of which show important info, but none of which actually provide the answers.
    I Stopped the following services to see if that would affect the log file generation in any way, and it has not!
    MS Exchange Transport
    Mail Submission
    IIS (Site Stopped in IIS)
    Mailbox Assistants
    Content Indexing Service
    With the above services stopped, I still see dozens (or more) log files generated in under 10 minutes, I also checked mailbox size reports (top 10) and found that several users mailboxes were generating item count increases for one user of
    about 300, size increases for one user of about 150Mb (over the whole day).
    I am not sure what else to check here? Any ideas?
    Thanks,
    Robert
    Robert

    Hmm - this sounds like an device is chewing up the logs.
    If you use log parser studio, are there any stand out devices in terms of the # of hits?
    And for the ExMon was that logged over a period of time?  The default 60 second window normally misses a lof of stuff.  Just curious!
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Rhoerick, 
    Thanks for the response. When checking the logs the highest number of hits were the (Source) Load Balancers, Port 25 VIP. The problem i was experience was the following: 
    1) I kept expecting the log file generation to drop to an acceptable rate of 10~20 MB Per Minute (Max). We have a large environment and use the exchange sevrers as the mail relays for the hated Nagios monitoring environment
    2) We didn't have our enterprise monitoring system watching SMTP traffic, this is  being resolved. 
    3) I needed to look closer at the SMTP transport database counters, logs, log files and focus less on the database log generation, i did do some of that but not enough of that. 
    4) My troubleshooting kept getting thrown off due to the monitoring notifications seeming to be sent out in batches (or something similar) stopping the transport service for 10 ~ 15 minutes several times seemed to finally "stop the transactions logs
    from growing at a psychotic rate". 
    5) I am re-running my data captures now that i have told the "Nagios Team" to quit killing the exchange servers, with their notifications, sometimes as much as 100+ of the same notifications for the same servers, issues. so far at a quick glance
    the log file generation seems to have dropped by about 30%. 
    Question: What would be the best counters to review in order to "Put it all together"? Also note: our Server roles are split, MBX and CAS/HT. 
    Robert 
    Robert

  • Exchange 2010 SP3 RU 5 - Event id 4999

    We have Exchange 2010 SP3 RU5 with four CAS/HT and five mailbox servers. We get tons of event 4999 on the four CAS/HT during the last weeks:
    Watson report about to be sent for process id: 6456, with parameters: E12, c-RTL-AMD64, 14.03.0178.000, AirSync, MSExchange ActiveSync, Microsoft.Exchange.Data.Storage.GlobalObjectId.IsForeignUid, UnexpectedCondition:NullReferenceException, 54b1, 14.03.0178.000.
    ErrorReportingEnabled: False
    We have 10000+ mailboxes and no problem with activesync has been reported. I increased diagnostic logging of activesync to "expert" without getting more details about this. I have also restarted all four CAS/HT servers but event 4999 is
    still there.
    Any ideas?

    Thanks for your reply Willard Martin
    This event is also from MSExchange Common and the process id 6456 referred to in the event text is w3wp.exe.
    I also checked both your links but they are not similar to my problem. The first of your links is about  "System.IndexOutOfRangeException" and doesn't seem to have anything to do with ActiveSync. The second is about ActiveSync but with another kind
    of error: "UnexpectedCondition:ArgumentNullException". 
    My error text is "UnexpectedCondition:NullReferenceException"

  • Exchange Server 2010 SP3 Windows Installer

    Does anyone know when Exchange 2010 SP3 installation will be compatible with the Windows Installer 5.0?
    HossFly, Exchange Administrator

    Hi,
    Based on my knowledge, Windows Installer 5.0 is not supported for Exchange 2010 SP3. Windows Installer 4.5 is supported for Exchange 2010 SP3.
    For more information, here is an article for your reference.
    Exchange Server Supportability Matrix
    http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2010 SP3 installation Problem

    Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
    Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
    Below the complete error from Exchange Setup Logs
    [02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
    [02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
    [02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
    [02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
    [02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
    [02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
    [02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
    [02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
    [02/16/2014 05:03:04.0333] [0] End of Setup
    [02/16/2014 05:03:04.0333] [0] **********************************************

    Hi,
    As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
    Based on my research, there is no Microsoft article about the hotfix of  KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
    For more information, you can refer to the following article:
    http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
    Thus, to get more professional and faster help, I recommend you contact with our following support:
    https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange 2010 SP3, Windows 2008 R2, Windows Installer 5.0

    Windows 2008 R2 uses Windows Installer 5.0
    http://support.microsoft.com/kb/942288/en-us
    Windows 2008 R2 is a supported OS for Exchange 2010 SP3
    Why is Windows Installer 5.0 not shown as compatible with Exchange 2010 SP3?
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

    Hi,
    There is no official document about the reason Windows Installer 5.0 is not compatible with Exchange 2010 SP3 for our reference currently. We have to wait for update. Thanks for understanding.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 SP3 mailbox role installation error

    Hello.
    I can't install the Mailbox role on a Windows 2008 R2 server, the first Exchange in the domain and forest (2 dcs in the domain).
    Client Access Role and Hub Transport Role installed correctly.
    Setup preparations - without an error.
    Started the Exchange 2010 SP3 Installation, which start correctly, all prerequisites are seems to be ok. When arriving on the Mailbox Roles it make this error:
    02.05.2014 13:42:46.0634] [2] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0634] [2] [ERROR] An object class violation occurred.
    [02.05.2014 13:42:46.0634] [2] Ending processing enable-mailbox
    [02.05.2014 13:42:46.0649] [1] The following 1 error(s) occurred during task execution:
    [02.05.2014 13:42:46.0649] [1] 0.  ErrorRecord: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] 0.  ErrorRecord: Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to
    include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
     ---> System.DirectoryServices.Protocols.DirectoryOperationException: An object class violation occurred.
       at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
       at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
       at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, IAccountingObject budget, Nullable`1 clientSideSearchTimeout)
       at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Data.Directory.ADSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
       at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
       at Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
       at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession.Microsoft.Exchange.Data.IConfigDataProvider.Save(IConfigurable instance)
       at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalProcessRecord()
       at Microsoft.Exchange.Management.RecipientTasks.EnableMailbox.InternalProcessRecord()
       at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
    [02.05.2014 13:42:46.0649] [1] [ERROR] The following error was generated when "$error.Clear();
              if (!$RoleIsDatacenter)
                $arbUsers = @(get-user -Filter {lastname -eq "MSExchApproval 1f05a927-3be2-4fb9-aa03-b59fe3b56f4c"} -IgnoreDefaultScope -ResultSize 1);
                if ($arbUsers.Length -ne 0)
                  $mbxname = $arbUsers[0].name;
                  $mbxs = @( get-mailbox -arbitration -Filter {name -eq $mbxname} -IgnoreDefaultScope -resultSize 1 );
                  if ( $mbxs.length -eq 0)
                    $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                    if ($dbs.Length -ne 0)
                      enable-mailbox -Arbitration -identity $arbUsers[0] -database $dbs[0].Identity;
            " was run: "Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for
    its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] [ERROR] An object class violation occurred.
    [02.05.2014 13:42:46.0649] [1] [ERROR-REFERENCE] Id=SystemAttendantDependent___04bbd8c4a86b4d2c9403cdddf5b39579 Component=EXCHANGE14:\Current\Release\Transport\BCM\Moderated Transport
    [02.05.2014 13:42:46.0649] [1] Setup is stopping now because of one or more critical errors.
    [02.05.2014 13:42:46.0649] [1] Finished executing component tasks.
    [02.05.2014 13:42:46.0712] [1] Ending processing Install-MailboxRole
    Any help would be appreciate.
    Thanks,
    Igor K.

    Hi,
    The above error may occur when the federated built-in e-mail account that links to the computer account no longer exists or the federated built-in e-mail account in the Active Directory service is corrupted.
    I recommend you follow the steps below for troubleshooting:
    1. Remove the FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 e-mail account by using the ADSIEdit tool.
    a. Run adsiedit.msc.
    b. Locate the Default Naming Context node, and then locate to the CN=Users container.
    c. Locate and then right-click the CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 container. Then, click Delete.
    2.Rerun the Exchange Server 2010 Mailbox role setup application.
    3.Create a new federated e-mail account by using the following cmdlet:
    New-Mailbox -Arbitration -Name FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 -UserPrincipalName
    FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042@<Default_Accepted_Domain>
    Hope it helps.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

    Quick question. 
    What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
    Hasan

    Hi
    Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
    Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive. 
    Hasan

  • Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

    Hi there:
    We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
    Quick briefing:
    Followed this instructions:
    http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
    * Created CRAWL RULE
    - Used Domain Admin for content access ---> IS THIS WRONG?
    - Domain Admin can access public folder thru Outlook Web Access (checked)
    - Included all items in this path
    PRINTSCREEN 1
    * Added a content source for Exchange Server public folders
    - Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
    - Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
    PRINTSCREEN2
    * Did a FULL CRAWL
    PROBLEM:
    - Search results does not throw "correct data". Some items are not being found
    CRAWL LOG is reporting: Error while crawling LOB contents
    Detailed error message:
    https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
    Error while crawling LOB contents.
    Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
    The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
    System.InvalidOperationException An internal server error occurred.
    Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
    We thought it's a throttling issue / found possible solution:
    http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
    Tried it, still same Error messages, problem not resolved.
    Any hints? Please advise.
    With best regards
    bostjanc

    Hi Bostjan,
    From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
    For throttling policy part
    1.Execute the command for Set-ThrottlingPolicy
    Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
    2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
    For registry key part
    1. Start Registry Editor (regedit).
    2. Navigate to the following registry subkey:
    \\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    3. Right-click ParametersSystem, point to New, and then click Key.
    A new key is created in the console tree.
    4. Rename the key MaxObjsPerMapiSession, and then press Enter.
    5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
    The new value is created in the result pane.
    6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
    7. Right-click the newly created key, and then click Modify.
    8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
    9. Restart the Microsoft Exchange Information Store service.
    If it still doesn’t help, please check ULS log for related error message.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Problems with OWA after installing Exchange 2010 SP3

    Hi,
    I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
    I did a reset for the OWA vritual directory, but nothing helps..
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
    ASP.auth_logon_aspx..ctor() +17
    __ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
    System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
    System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
    System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

    Hi Alelieveld,
    When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
    After you reset the VD, did you restart IIS?
    For more information, please see:
    Reset Client Access Virtual Directories
    http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
    Frank Wang
    TechNet Community Support

  • Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

    Hi,
    Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
    Thank you

    I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure.  If you mean "a folder that can contain calendar items", that is not a calendar
    item itself.
    Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?"  If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
    pretty unruly with the more that you have.  I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
    to).  And anyone will tell you that you want to restrict anyone from creating their own folders at the root level.  In fact, this is the default setting for a new Exchange 2010 installation.
    I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

Maybe you are looking for

  • Receiving Notifications via email

    I have a user who is not receiving an email notification when a requisition is forwarded to her for approval. Can anyone tell me what could be wrong?

  • Seeking help with JDBC driver

    I'm new at this stuff, and I've downloaded the 8.05 JDBC drivers for NT. This includes classes111.zip and oci805jdbc.dll. I can compile my java program but no matter what I do, when I run it, java complains that there is no suitable driver. Can someo

  • QUESTION FOR  C.pfaffenbichler

    C.pfaffenbichler Hello, could you explain in more detail, as it has done this? the great¡¡ thank you very much, very friendly.

  • I cannot order an iphoto product

    I have Iphoto 9.2.1. When I click on buy book or buy calendar, the "your order" page that comes up doesn't show my product (see screenshot attached below) The only button that works is "cancel." Can anyone help? I am located in Singapore but my IP is

  • Inbox on my ipad hasn't updated for two days

    HI the inbox in my ipad  Yahoo mail account has not updated for two days, it keeps continually checking for mail but nothing comes in! It is working fine on my iPhone!  I'm not terribly technically minded so just wondered if anyone had any ideas?? th