Exchange 2010 SP3 RU5 on 2012 r2 - yei or nei

Guys, one question:
On this link:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
I see that Exchange 2010 SP3 with RU5 is not supported on 2012 r2 and is only supported on 2012 server.
One dumb question: But what if you have 2012 r2 domain controller, can you put exchange 2010 sp3 ru5 there?
bostjanc

Ok, but even if that worked for you it doesn't mean that it is supported (because its not) and it wouldn't be a good idea to put that server in production. If your plan is to stay on Exchange 2010, then you should install it on a supported OS.
Martina Miskovic

Similar Messages

  • Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

    The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
    2010 SP3 RU5+ and Powershell 4 are compatible.  But, there is very little actual discussion about how well that works. 
    I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates. 
    Can I get a summary of the caveats and benefits from someone who has actually done this in a
    real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?  
    Also, how has this affected EMC operations?  
    As always thank you in advance!  

    I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present.  Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host.  For example, calling the ActiveDirectory
    module from EMS on an Win 2012 server (ps 3.0) fails.
    I'll double check the extent of this scenario and get back to you.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Install Exchange 2010 Sp3 on Windows 2012 R2

    Dear All,
    From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
    that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
    http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
    Thank you

    The prerequisite check is checking that the required Windows components are installed.  Exchange 2010 is still not supported on Windows Server 2012 R2.

  • Exchange 2010 SP3 RU5 automapping issue - fixed in later RU?

    Current Level: Exchange 2010 SP3 RU1
    I'm planning on updating to RU8v2 but discovered
    this thread indicating issues with RU5 + automapping + Office 2010 SP1.  I couldn't find anyone reporting that the later RUs introduced the same issue or fixed it.  So I'm just looking for anyone that may have experience with updating
    past RU5 and still running Outlook 2010 SP1, did you see the same behavior with automapped mailboxes?

    That should have been done last October
    http://blogs.technet.com/b/rmilne/archive/2014/10/14/office-2010-sp2-you-did-upgrade-right.aspx
    take a peek at that post and sign up for the lifecycle status updates please.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

    Dear forum,
    I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
    After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
    I let it alone for more than an hour but nothing happens.
    Launching it with /log returns this line at the end:
         "InstallFiles: File: Copying new files,  Directory: ,  Size: "
    Do you have already meet this issue or do you have any idea about the cause?
    Thanks for your help.

    Hi Amy,
    You'll find below the errors found in the rollup setup log:
    DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
    1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
    DEBUG: Error 2726:  Action not found: PreNgenEndDlg
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
    Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
    Just tell me if you need the whole log.
    Thanks

  • Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

    Hi All. 
    This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email 
    But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests. 
    I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second. 
    From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
    see in Android Logcat the problem always related to this PING command 
    10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
    10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
    10-07 08:12:38.904 D/Exchange(31971): created outputstream
    10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
    10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
    10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
    10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
    10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
    10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected]  u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

    Hi ronaldosy,
    How about the work flow of Outlook or OWA on PC internally/externally?
    If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
    Best Regards,
    Allen Wang

  • Exchange 2010 SP3, RU5 - Massive Transaction Log File Generation

    Hey All,
    I am trying to figure out why 1 of our databases is generating 30k Log Files a day! The other one is generating 20K log files a day. The database does not grow in size as the log files are generated, the problem is log file generation.
    I've tried running through some of the various solutions out there, reviewed message tracking logs, rpc client access logs, IIS Logs - all of which show important info, but none of which actually provide the answers.
    I Stopped the following services to see if that would affect the log file generation in any way, and it has not!
    MS Exchange Transport
    Mail Submission
    IIS (Site Stopped in IIS)
    Mailbox Assistants
    Content Indexing Service
    With the above services stopped, I still see dozens (or more) log files generated in under 10 minutes, I also checked mailbox size reports (top 10) and found that several users mailboxes were generating item count increases for one user of
    about 300, size increases for one user of about 150Mb (over the whole day).
    I am not sure what else to check here? Any ideas?
    Thanks,
    Robert
    Robert

    Hmm - this sounds like an device is chewing up the logs.
    If you use log parser studio, are there any stand out devices in terms of the # of hits?
    And for the ExMon was that logged over a period of time?  The default 60 second window normally misses a lof of stuff.  Just curious!
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Rhoerick, 
    Thanks for the response. When checking the logs the highest number of hits were the (Source) Load Balancers, Port 25 VIP. The problem i was experience was the following: 
    1) I kept expecting the log file generation to drop to an acceptable rate of 10~20 MB Per Minute (Max). We have a large environment and use the exchange sevrers as the mail relays for the hated Nagios monitoring environment
    2) We didn't have our enterprise monitoring system watching SMTP traffic, this is  being resolved. 
    3) I needed to look closer at the SMTP transport database counters, logs, log files and focus less on the database log generation, i did do some of that but not enough of that. 
    4) My troubleshooting kept getting thrown off due to the monitoring notifications seeming to be sent out in batches (or something similar) stopping the transport service for 10 ~ 15 minutes several times seemed to finally "stop the transactions logs
    from growing at a psychotic rate". 
    5) I am re-running my data captures now that i have told the "Nagios Team" to quit killing the exchange servers, with their notifications, sometimes as much as 100+ of the same notifications for the same servers, issues. so far at a quick glance
    the log file generation seems to have dropped by about 30%. 
    Question: What would be the best counters to review in order to "Put it all together"? Also note: our Server roles are split, MBX and CAS/HT. 
    Robert 
    Robert

  • Exchange 2010 SP3 RU 5 - Event id 4999

    We have Exchange 2010 SP3 RU5 with four CAS/HT and five mailbox servers. We get tons of event 4999 on the four CAS/HT during the last weeks:
    Watson report about to be sent for process id: 6456, with parameters: E12, c-RTL-AMD64, 14.03.0178.000, AirSync, MSExchange ActiveSync, Microsoft.Exchange.Data.Storage.GlobalObjectId.IsForeignUid, UnexpectedCondition:NullReferenceException, 54b1, 14.03.0178.000.
    ErrorReportingEnabled: False
    We have 10000+ mailboxes and no problem with activesync has been reported. I increased diagnostic logging of activesync to "expert" without getting more details about this. I have also restarted all four CAS/HT servers but event 4999 is
    still there.
    Any ideas?

    Thanks for your reply Willard Martin
    This event is also from MSExchange Common and the process id 6456 referred to in the event text is w3wp.exe.
    I also checked both your links but they are not similar to my problem. The first of your links is about  "System.IndexOutOfRangeException" and doesn't seem to have anything to do with ActiveSync. The second is about ActiveSync but with another kind
    of error: "UnexpectedCondition:ArgumentNullException". 
    My error text is "UnexpectedCondition:NullReferenceException"

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Exchange 2010 SP3 - Can DAG member be on OS 2012 R2 STD?

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc
    No. It wont let you do that. 
    http://technet.microsoft.com/en-us/library/dd638104(v=exchg.141).aspx
    DAGs are available in both Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition. In addition, a DAG can contain a mix of servers running Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition.
    Each member of the DAG must also be running the same operating system. Exchange 2010 is supported on both the Windows Server 2008 and Windows Server 2008 R2 operating systems. All members of a DAG must run either Windows Server 2008 or Windows Server 2008
    R2. They can't contain a combination of both Windows Server 2008 and Windows Server 2008 R2.
    In addition to meeting the prerequisites for installing Exchange 2010, there are operating system requirements that must be met. DAGs use Windows Failover Clustering technology, and as a result, they require the Enterprise version of Windows.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

    We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
    message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380   
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793  
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753  
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738  
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302  
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source"
    This is happening on every mailbox we attempt to move. Any help would be appreciated

    Thanks for responding
    I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
    We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
    Here is the entire message from the log:
    11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
    6.0 (Build 7654.0).
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
    Regular Items: 20, 1.906 MB (1,998,818 bytes)
    Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
    FAI Items: 20, 0 B (0 bytes)
    FAI Deleted Items: 0, 0 B (0 bytes)
    11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
    11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380  
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793 
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753 
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738 
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302 
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source
    Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
    PropTags: [ContainerHierarchy; ContainerContents]
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

  • Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500

    I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
    When user login in to OWA where his mailbox is located  on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server  i get Error http 50
    The website cannot display the page :   HTTP 500   »https://URLEXCHANGE2013/owa/auth.owa«
    The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
    URL on Exchange 2013 are different  as fro Exchange 2010.
    I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
    Exchange server 2013 Sp1 is installed on Windows server 2012 R2.

    Assumption  is correct. I have even  enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
    But remember Exchange 2013 is fresh installation on  Windows server 2012 R2.
    IIS LOG
    2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
    443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
    2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
    443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
    2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
    443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
    2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
    302 0 0 9937
    2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
    https://OWA.company.com/ 200 0 0 1015
    2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
    - 200 0 0 671
    2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 46
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 0
    2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 302 0 0 812
    2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
    2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
    500 0 0 187
    2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
    - 200 0 0 8265
    2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 15265
    2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
    HTTPERR  LOG :
    2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
    2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
    2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
    2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    Trace login, ok it is xml,  so print is..
    -Request Summary  
    Site
    1 
    Process
    8232 
    Failure Reason
    STATUS_CODE 
    Trigger Status
    500 
    Final Status
    500 
    Time Taken
    500 msec 
    Url
    http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ 
    App Pool
    MSExchangePowerShellFrontEndAppPool 
    Authentication
    Kerberos 
    User from token
    companyNT\SM_9c071c4922fd420fb 
    Activity ID
    {8000134C-0001-E300-B63F-84710C7967BB} 
    -Errors & Warnings  
    No.↓ 
    Severity  
    Event  
    Module Name  
    157. view trace 
    Warning 
    -MODULE_SET_RESPONSE_ERROR_STATUS 
    ModuleName
    ManagedPipelineHandler 
    Notification
    EXECUTE_REQUEST_HANDLER 
    HttpStatus
    500 
    HttpReason
    Request Failed 
    HttpSubStatus
    0 
    ErrorCode
    The operation completed successfully.
     (0x0) 
    ConfigExceptionInfo
     ManagedPipelineHandler 
     See all events for the request 

  • Exchange 2010 SP3 RU7 system requirements for server 2008

    Exchange 2010 SP3 system requirements list server 2008 SP2 as being a compatible OS.  KB2961522 only lists Windows 7 Professional 64-bit, Windows Server 2008 R2, Windows Server 2008 R2 SP1, Windows Server 2008 R2 Standard, Windows Server 2012. 
    Does it really support windows 7 but not server 2008 SP2??
    Thanks

    Hi,
    Yes, Windows Server 2008 SP2 is supported on Exchange Server 2010 SP3. Windows 7 SP1 is only supported for Exchange management tools, not for Exchange server.
    Hope my clarification can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • MS Exchange 2010 Sp3 Ent Migration to Exchange 2013

    Hello,
    We currently have 2 Exchange 2010 SP3 servers in 1 DAG. Both servers host CAS, Mailbox and Hub Role.
    I want to introduce a 3<sup>rd</sup> Exchange 2013 Server and slowly move users onto a new DAG I build in Exchange 2013.
    Can I create a 3<sup>rd</sup> Exchange 2013 Server with CAS and Mailbox Server Role and make the 3<sup>rd</sup> Exchange server (2013) a member of the existing (2010) CAS array then slowly perform local move requests for users mailboxes
    from my Exchange 2010 DAG to the Exchange 2013 DAG without any disruption to my outlook, OWA and AS clients?
    Exchange 2010 (Windows 2008 R2)
    Exchange 2013 (Windows 2012 R2 DataCenter)

    Hi,
    In Exchange 2013, all Outlook connectivity (Internal and External) takes place over Outlook Anywhere(RPC/HTTP). Thus, CAS array which is used internal for RPC/TCP protocol (MAPI) no longer exists in Exchange 2013.
    For your coexistence environment and the plan to migrate all mailboxes to Exchange 2013 in the future,
     we need to set all virtual directories for CAS 2013 and enable Outlook Anywhere for Exchange 2010. If the mailbox is moved to Exchange 2013, the Outlook client would connect to the server which is set in Outlook Anywhere External host name
    and Internal host name instead of CAS array. If all configurations are proper, CAS 2013 would also proxy the service requests for Exchange 2010 users.
    Here are some reference about Client Connectivity in an Exchange 2013 Coexistence Environment:
    http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
    Exchange 2013 Client Access Server Role
    http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
    Exchange Server 2013 Client Access Server High Availability
    http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
    Exchange 2010/2007 to 2013 Migration and Co-existence Guide
    http://msexchangeguru.com/2013/05/10/exchange2013-migration/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
    make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Event ID 9877, Exchange 2010 SP3 RU4

    On 2/19 I installed RU4 for Exchange 2010 SP3 on a server at a client's site.  This is a single server with all the roles on it, with about 40-45 mailboxes. Ever since then, during the busiest hours of the day (around 7AM to 5:30PM or so), I get the
    following event log error on this server:
    Log Name:      Application
    Source:        MSExchangeIS Mailbox Store
    Date:          2/20/2014 6:58:49 AM
    Event ID:      9877
    Task Category: Content Indexing
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      server.domain.com
    Description:
    Content Indexing function 'CISearch::EcGetRowsetAndAccessor' received an unusual and unexpected error code from MSSearch.
    Mailbox Database: Mailbox Database 0784353824
    Error Code: 0x80043629
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeIS Mailbox Store" />
        <EventID Qualifiers="49198">9877</EventID>
        <Level>2</Level>
        <Task>46</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-02-20T11:58:49.000000000Z" />
        <EventRecordID>423922</EventRecordID>
        <Channel>Application</Channel>
        <Computer>server.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>CISearch::EcGetRowsetAndAccessor</Data>
        <Data>Mailbox Database 0784353824</Data>
        <Data>0x80043629</Data>
        <Binary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inary>
      </EventData>
    </Event>
    The frequency of these errors varies and it definitely seems to be related to the amount of traffic. Over the weekend it only occured about 5-10 times a day.  For the past couple of days, it's been pretty constant about every 15 minutes or
    so all day.
    I've looked this up, but I've only found a few posts mentioning similar errors, all relating to earlier versions of Exchange 2010. Supposedly this problem was fixed in one of the rollups to SP1 or SP2, I think.  I never saw these errors, though,
    until the SP3 RU4 rollup.  I haven't heard any complaints from users, but I'm concerned that this might escalate and start causing noticeable searching issues.
    Any ideas would be appreciated.
    Deb

    Hi Deb,
    We're getting the same error as you on Exchange 2010. We have exchange 2010 and exchange 2013 running in a coexisting environment. Since we applied Service Pack 1 for Exchange 2013, we've had nothing but issues!
    I've tried the rebuild of the index catalogues by following these instructions:
    http://ghousewin.blogspot.in/2012/08/not-able-to-search-in-owa-event-id-9877.html
    This failed to resolve the issues too. We've rebooted the server, restarted all the search services and still nothing! We're pulling our hair out here!
    The only thing I haven't tried is the prepareAD commands in this post:
    http://social.technet.microsoft.com/Forums/exchange/en-US/7a4a7400-a582-4f95-9360-6d84e66e87ad/ex2010-2node-dag-search-in-owa-not-working-caused-by-eventid-9877-content-indexing-function
    I'm unable to try this during the day as we have no testing
    environment and would hate to mess the production environment up if this went wrong.
    If you're able to try this during the day, would you let us know how it goes?
    Many thanks,
    Stephen

Maybe you are looking for