Exchange 2010 SP3 Upgrade Failed
Dear All,
I'm trying to upgrade Exchange 2010 on SP2 or 3 but I'm getting below error.
Setup encountered a problem while validating the state of Active Directory: An Active Directory error 0x51 occurred when trying to check the suitability of server 'Server.Domain.Com'. Error: 'Active directory response: The LDAP server is unavailable.'
I have 3 DCs
PDC 2003
ADC 2003
ADC 2008 R2, All FSMO Roles are on 2008 R2.
Exchange 2007 SP3 is in place with 1 Exchange 2010 box which is working fine.
Please help me in this regard.
Thanks in advance.
Hi
Can you ping your DC from your exchange server? On exchange 2010 can you run the following from your EMS, what does the results give you?
Get-ADServerSettings | fl
Similar Messages
-
Exchange 2010 SP3 upgrade fails at stopping services for Management tools station
Attempting to upgrade a Windows 7 SP1 64bit virtual machine from Exchange 2010 SP2 management tools to SP3 fails with the following error:
Summary: 11 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:15:19
Preparing Setup
Completed
Elapsed Time: 00:00:00
Stopping Services
Failed
Error:
The following error was generated when "$error.Clear();
& $RoleBinPath\ServiceControl.ps1 -Operation:DisableServices -Roles:($RoleRoles.Replace('Role','').Split(',')) -SetupScriptsDirectory:$RoleBinPath;
& $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
" was run: "Service 'NetBT' failed to reach status 'Stopped' on this server.".
Service 'NetBT' failed to reach status 'Stopped' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:15:19
Here is the powershell execute policy:
PS C:\> Get-ExecutionPolicy -list
Scope
ExecutionPolicy
MachinePolicy
Unrestricted
UserPolicy
Unrestricted
Process
Undefined
CurrentUser
RemoteSigned
LocalMachine
RemoteSignedHi Bad Dos,
Any updates?
You can also try to uninstall sp2 Management Tool first, then install SP3 directly.
Frank Wang
TechNet Community Support -
Dear Exchange admin,
We tried to upgrade Exchange 2010 SP1 to Exchange 2010 SP3 .In HQ site all preparation finished smoothly.
But in DR we are unable to do even preparation.We are getting the following error.
Please advice me how can proceed.
Summary: 4 item(s). 2 succeeded, 2 failed.
Elapsed time: 00:00:37
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Failed
Error:
Setup needs to contact the Active Directory schema master but this computer is not in the same Active Directory site as the schema master (Default-First-Site-Name).
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=2376fec1-b9ce-44db-beb6-cb9ac4788988
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain kfupm and site Default-First-Site-Name, and wait for replication to complete.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Elapsed Time: 00:00:14
Languages Prerequisites
Completed
Elapsed Time: 00:00:04
Mailbox Role Prerequisites
Failed
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain kfupm and site Default-First-Site-Name, and wait for replication to complete.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'mmc' () process (ID: 4508) has open files. Close the process and restart Setup.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'powershell' () process (ID: 3808) has open files. Close the process and restart Setup.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'mmc' (4508) process (ID: ) has 'Microsoft.Exchange.Management.SnapIn.Esm.dll' loaded. Close the process and restart setup.
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=f0d3f291-5a52-43ea-9121-24aa7cd0c30e
Warning:
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
Elapsed Time: 00:00:18
AshrafHi Ashraf
Thank you for your question.
Exchange update cannot continue because the computer that is running update is not in the same Active Directory site or domain as the server that is assigned the domain schema master role, also known as flexible single master operations or FSMO.
You can refer to the following link to change exchange site schema:
http://technet.microsoft.com/en-US/us-cn/zh-hans-cn/library/2376fec1-b9ce-44db-beb6-cb9ac4788988.aspx
You also notice the order for updated:
1.Client Access servers (beginning with the internet-facing site)
2.Hub Transport and Edge Transport servers
3.Mailbox servers
4.Unified Messaging servers
You can refer to the following link to update:
http://exchangeserverpro.com/installing-exchange-server-2010-service-pack-3/
If there are any questions, please let me know.
Best Regard,
Jim -
Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers. -
Exchange 2010 SP3 upgrade - Event ID 4999 - Address Book Crash
0
I just upgraded an Exchange 2010 SP1 CAS server to SP3 - since then anytime an outlook client connects to the CAS server, the Address Book service crash's and event 4999 is logged in App log. I can reproduce the issue by attempting to create a new
outlook profile and checking the name against the CAS server. This crash's the service and the client recieves an error message. The contents of event ID 4999 is below. I've tried re-installing the CAS role, re-applying the schema extension
for SP3. I've installed all windows updates, enabled logging but I'm not getting anywhere. If anyone can help with this issue, I would greatly appreicate it.
Watson report about to be sent for process id: 10168, with parameters: E12, c-RTL-AMD64, 14.03.0123.004, M.E.AddressBook.Service, M.Exchange.Rpc, M.E.R.R.RfriRpcOperationBase.Complete, System.ArgumentException, a3e, 14.03.0123.002.
ErrorReportingEnabled: True
That error is followed by a message that the Address Book service has sucessfully startedHello,
For exchange 2010 sp3, there is no article to explain the issue.
I suggest you run EXBPA aganist your exchange server health check.
Cara Chen
TechNet Community Support -
Exchange 2010 SP3 upgrade on Windows Server Standard SP2
I'm midway through the swing upgrade process of migrating from Exchange 2003 - Exchange 2010 to Exchange 2013. Everything has gone smoothly between the Exchange 2003 and Exchange 2010 migration which I started two days ago. it has been running
great. I am beginning the final stages of moving from the Exchange 2010 server to a new Exchange 2013 server, but it requires my Exchange 2010 server to be upgraded to SP3. I am now trying to install Exchange Server 2013 SP3 Upgrade and I'm
getting (3) Client Access Role Prerequisites errors. Finding any of these HotFixes and patches is frustrating, because any link provided does not work. It has gotten me nowhere. Here is my Readiness Checks:
Summary: 6 item(s). 5 succeeded, 1 failed.
Elapsed time: 00:01:06
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Completed
Elapsed Time: 00:00:08
Languages Prerequisites
Completed
Elapsed Time: 00:00:02
Hub Transport Role Prerequisites
Completed
Elapsed Time: 00:00:15
Client Access Role Prerequisites
Failed
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
Elapsed Time: 00:00:15
Mailbox Role Prerequisites
Completed
Warning:
Multi-mailbox search of on-premises and Office 365 mailboxes in a hybrid configuration requires installation of the update mentioned in Microsoft Knowledge Base article 982867 (http:// code.msdn.microsoft.com/KB982867).
Elapsed Time: 00:00:24
I put a space between the http://" space "URL so I could display the links.
Any help/guidance suggestions would be greatly appreciated.
ChrisI just got these two to go away:
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
still have this one outstanding:
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
I have tried the FIX: WCF services that are hosted by NLB computers to route messages to Exchange Server fail when WebHeader settings are added by using a .NET Framework 3.5 SP1 application
Windows6.0-KB2637518-x64.msu
when I run it, it tells me "The Update does not apply to your system. So im thinking I need to remove the .NET Framework 4 Client Profile and the .NET Framework 4 Extended. reboot, then install
Windows6.0-KB2637518-x64.msu and then reinstall .NET Framework 4 Client Profile and the .NET Framework 4 Extended
this has taken a day or so to figure out the order of dependencies and the order to put them on.
Frustrating, since I won't be using Exchange 2010, were moving all the way to Exchange 2013 on a brand new server.
Chris -
I am attempting to prepare our Exchange 2010 Server (RTM) for an upgrade to SP3.
When attempting to run "setup.com /PrepareAD" to prep the AD schema, the command fails and I receive the following error in the ExchangeSetup log:
[12/19/2013 21:50:48.0650] [1] Beginning processing Get-OrganizationConfig
[12/19/2013 21:50:48.0665] [1] Searching objects of type "OrganizationConfig" with filter "$null", scope "SubTree" under the root "$null".
[12/19/2013 21:50:48.0806] [1] Previous operation run on domain controller 'DC1.company.com'.
[12/19/2013 21:50:48.0806] [1] Preparing to output objects. The maximum size of the result set is "unlimited".
[12/19/2013 21:50:49.0945] [1] Ending processing Get-OrganizationConfig
[12/19/2013 21:51:42.0753] [1] [REQUIRED] A reboot from a previous installation is pending. Please restart the system and rerun setup.
[12/19/2013 21:51:43.0190] [1] Ending processing test-setuphealth
[12/19/2013 21:51:43.0221] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/19/2013 21:51:43.0283] [0] End of Setup
I am receiving this error when attempting to run "setup.com /PrepareAD" from either of our two GCs and I get the same error from both GCs, so the issue doesn't appear to be related to the individual servers.
What should I be checking, to clear this error so the AD schema update can be performed?
Environment
Exchange: Exchange Server 2010 RTM
Server: Windows 2008 R2 (fully patched)
Domain and Forest functionality: Windows 2008 R2 nativeOne follow up:
If I go into regedit, I see that under HKLM\System\CurrentControlSet\Control\Session Manager there is an entry from when I recent installed Google Chrome.
The entry looks like:
MultiString: PendingFileRenameOperation
Value Data: \??\C:\Program FIles (x86)\Google\Chrome
Is this "pending rename" what's causing SP3 to refuse to install, because it thinks the OS install state isn't 'clean'? -
Exchange 2010 SP3 Installation Failed
I have Exchange 2010 SP2 RU8. We tried to install SP3 but continue to get a failure.
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you
have the correct upgrade.
Error code: 1642
Here is the MSI log:
=== Verbose logging started: 5/30/2014 17:44:11 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\System32\msiexec.exe ===
MSI (c) (F4:C8) [17:44:11:684]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (F4:C8) [17:44:11:684]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (F4:CC) [17:44:11:699]: Resetting cached policy values
MSI (c) (F4:CC) [17:44:11:699]: Machine policy value 'Debug' is 0
MSI (c) (F4:CC) [17:44:11:699]: ******* RunEngine:
******* Product: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}
******* Action:
******* CommandLine: **********
MSI (c) (F4:CC) [17:44:11:699]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (F4:CC) [17:44:11:699]: Cloaking enabled.
MSI (c) (F4:CC) [17:44:11:699]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (F4:CC) [17:44:11:699]: End dialog not enabled
MSI (c) (F4:CC) [17:44:11:699]: Original package ==> C:\Windows\Installer\48e783.msi
MSI (c) (F4:CC) [17:44:11:699]: Package we're running from ==> C:\Windows\Installer\48e783.msi
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: Uninstall Flags override found.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: Uninstall VersionNT override found.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}'.
MSI (c) (F4:CC) [17:44:11:715]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (F4:CC) [17:44:11:715]: MSCOREE not loaded loading copy from system32
MSI (c) (F4:CC) [17:44:11:731]: Opening existing patch 'C:\Windows\Installer\f63d4979.msp'.
MSI (c) (F4:CC) [17:44:11:731]: Opening existing patch 'C:\Windows\Installer\596a3.msp'.
MSI (c) (F4:CC) [17:44:11:731]: Original patch ==> C:\Temp\ExchSP3_RU6.msp
MSI (c) (F4:CC) [17:44:11:731]: Patch we're running from ==> C:\Temp\ExchSP3_RU6.msp
MSI (c) (F4:CC) [17:44:11:731]: SOFTWARE RESTRICTION POLICY: Verifying patch --> 'C:\Temp\ExchSP3_RU6.msp' against software restriction policy
MSI (c) (F4:CC) [17:44:11:731]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp has a digital signature
MSI (c) (F4:CC) [17:44:11:996]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp is permitted to run at the 'unrestricted' authorization level.
MSI (c) (F4:CC) [17:44:11:996]: SequencePatches starts. Product code: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}, Product version: 14.2.247.5, Upgrade code: {A4A259AB-A77F-4039-832A-27B431DDFFEA}, Product language 1033
MSI (c) (F4:CC) [17:44:11:996]: Full optimizations are not possible in the patch sequencer because new patch[es] had been added in the current transaction.
MSI (c) (F4:CC) [17:44:11:996]: The patch sequencer will optimize its execution by not checking the applicability of applied patches.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: verifying the applicability of QFE patch C:\Temp\ExchSP3_RU6.msp against product code: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}, product version: 14.2.247.5, product language 1033 and upgrade code: {A4A259AB-A77F-4039-832A-27B431DDFFEA}
MSI (c) (F4:CC) [17:44:11:996]: Validating transform 'E14_DAT_RTMToE14_DAT_UPG' with validation bits 0x922
MSI (c) (F4:CC) [17:44:11:996]: Note: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: QFE patch C:\Temp\ExchSP3_RU6.msp is not applicable.
MSI (c) (F4:CC) [17:44:11:996]: The original #_QFESequence table:
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.375.0 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.298.4 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: The pre-sorted #_QFESequence table: - this is useful to see if patches had been ordered correctly within resultant versions and patch families
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.298.4 VersionOrder: 0
SequenceOrder: 0 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.375.0 VersionOrder: 0
SequenceOrder: 1 Type: QFE
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: The initial #_Predecessor table:
MSI (c) (F4:CC) [17:44:11:996]: PatchFamily: E14_DAT,
PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE},
Predecessor GUID: NULL
MSI (c) (F4:CC) [17:44:11:996]: PatchFamily: E14_DAT,
PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426},
Predecessor GUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: Step 1
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: patch {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE} (PatchFamily E14_DAT) will be sequenced.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: Step 2
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: patch {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426} (PatchFamily E14_DAT) will be sequenced.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: The resulting #_OrderedGUIDs table:
MSI (c) (F4:CC) [17:44:11:996]: Patch: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
Order: 0 (Family: E14_DAT)
MSI (c) (F4:CC) [17:44:11:996]: Patch: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
Order: 1 (Family: E14_DAT)
MSI (c) (F4:CC) [17:44:11:996]: The ordered #_QFESequence table: - has the final sequence of QFEs. It lists each PatchGUID only once.
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.298.4 Order: 0
MSI (c) (F4:CC) [17:44:11:996]: PatchGUID: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426}
ResultantVersion: 14.2.247.5 PatchFamily: E14_DAT
Sequence: 14.2.375.0 Order: 1
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: there's no supersedence information available, so no patches will be superseded.
MSI (c) (F4:CC) [17:44:11:996]: SequencePatches returns success.
MSI (c) (F4:CC) [17:44:11:996]: Final Patch Application Order:
MSI (c) (F4:CC) [17:44:11:996]: {1B1DA2D5-6EFD-4EF7-B225-EAFBF51ABCBE} -
MSI (c) (F4:CC) [17:44:11:996]: {2D4DEC16-9DFE-4A3F-89C7-8D19F374B426} -
MSI (c) (F4:CC) [17:44:11:996]: Other Patches:
MSI (c) (F4:CC) [17:44:11:996]: Unknown\Absent: {32539431-026C-467E-98AD-9932CAC4B304} - C:\Temp\ExchSP3_RU6.msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have
the correct upgrade.
C:\Windows\Installer\48e783.msi
MSI (c) (F4:CC) [17:44:11:996]: Product: Microsoft Exchange Server - Update '{32539431-026C-467E-98AD-9932CAC4B304}' could not be installed. Error code 1642. Additional information is available in the log file C:\Users\dgates\AppData\Local\Temp\2\MSI4736a.LOG.
MSI (c) (F4:CC) [17:44:11:996]: Windows Installer installed an update. Product Name: Microsoft Exchange Server. Product Version: 14.2.247.5. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: {32539431-026C-467E-98AD-9932CAC4B304}. Installation
success or error status: 1642.
MSI (c) (F4:CC) [17:44:11:996]: Note: 1: 1708
MSI (c) (F4:CC) [17:44:11:996]: Product: Microsoft Exchange Server -- Installation failed.
MSI (c) (F4:CC) [17:44:11:996]: Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 14.2.247.5. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1642.
MSI (c) (F4:CC) [17:44:12:011]: MainEngineThread is returning 1642
=== Verbose logging stopped: 5/30/2014 17:44:12 ===
HossFly, Exchange AdministratorAs per the below log entries it seems that it is trying to install SP3 UR6 directly and failing saying its not applicable. If you are trying to install just SP3 then it shouldn't try installing UR6 at the same time so that seems strange to me...
MSI (c) (F4:CC) [17:44:11:731]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp has a digital signature
MSI (c) (F4:CC) [17:44:11:996]: SOFTWARE RESTRICTION POLICY: C:\Temp\ExchSP3_RU6.msp is permitted to run at the 'unrestricted' authorization level.
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: verifying the applicability of QFE patch C:\Temp\ExchSP3_RU6.msp against product code: {4934D1EA-BE46-48B1-8847-F1AF20E892C1}, product version: 14.2.247.5, product language 1033 and upgrade code: {A4A259AB-A77F-4039-832A-27B431DDFFEA}
MSI (c) (F4:CC) [17:44:11:996]: Note: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: 1: 2749 2: E14_DAT_RTMToE14_DAT_UPG 3: C:\Temp\ExchSP3_RU6.msp 4: 14.3.123.4 5: 14.2.247.5
MSI (c) (F4:CC) [17:44:11:996]: PATCH SEQUENCER: QFE patch C:\Temp\ExchSP3_RU6.msp is not applicable.
Looks like time to re-download
SP3 and give it a try.
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Hey Guys,
Urgent question here: I was trying to install SP3 for Exchange 2010. Unfortunately it failed on the install (all pre-requisites checked and passed). The problem: Windows Installer couldn't find a the exchangeserver.msi file. This happened immediately
after setup stopped the services.
I tried re-downloading the service pack and reinstalling, I got the same error. Anytime I selected the file using browse it failed and re-prompted me.
Error:
"click ok to try again or enter an alternate path to a folder containing the installation package "exchangeserver.msi" in the box below"
So here is what I did:
1) I reset all the services to automatic (the same way as before)
2) Rebooted the server
3) All Service started
4) DAG replication is working
I am going to work on figuring out how to fix the issue, however will this be a problem? will there be any data corruption? am I safe to let the server sit until I can open a ticket (if needed) ?
Thanks,
Robert
RobertHi,
Thank you for your question.
In order to resolve it, we could click the Browse button in the dialog box, locate the ExchangeServer.msi file, and then click OK
to continue the installation. The ExchangeServer.msi file is located on the Exchange Server 2010 installation media。
There are a referred link for us:
https://support.microsoft.com/en-us/kb/2888399
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Online Archives in Outlook 2010 disappeared after Exchange 2010 SP3 upgrade
I have Exchange 2010 and noticed it has never been updated since having it in production for 3 years now. So I downloaded SP3 and installed it after hours. After the install was complete, rollups 5,6,7, showed up in Windows Update so I installed those too.
Before I did the upgrade to SP3, I had Online Archives visible on just my user account mailbox and have about 2 years worth of emails in there. Since the upgrade, it is no longer visible in my Outlook 2010. I have tried to fix to remove SELF and re add it
to the mailbox with no change to the issue. I have tried to disable Archive for my mailbox and re-add. Nothing. Don't really know what else to try. Any ideas?Anyone?
-
We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciatedThanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job. -
Error Exchange Server 2010 SP3 Upgrade - OWA Already Exists - Event ID 1002
Hi,
I have a problem with my Exchange 2010 SP1 deploy in Windows server 2008 R2,
I try upgrade to Exchange 2010 SP3, an error happened when step progress CAS role
Error:
The following error was generated when "$error.Clear();
$InternalOwaUrl="https://" + $RoleFqdnOrName + "/owa";
new-OwaVirtualDirectory -DomainController $RoleDomainController -InternalUrl $InternalOwaUrl;
get-OwaVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where {$_.OwaVersion -eq "Exchange2010"} | set-OwaVirtualDirectory -WindowsAuthentication $true;
" was run: "The virtual directory 'owa' already exists under '(Server Name)/Default Web Site'.
Parameter name: VirtualDirectoryName".
The virtual directory 'owa' already exists under '(Server Name)/Default Web Site'.
Parameter name: VirtualDirectoryName
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
Error:
The following error was generated when "$error.Clear();
$InternalOwaUrl="https://" + $RoleFqdnOrName + "/owa";
new-OwaVirtualDirectory -DomainController $RoleDomainController -InternalUrl $InternalOwaUrl;
get-OwaVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where {$_.OwaVersion -eq "Exchange2010"} | set-OwaVirtualDirectory -WindowsAuthentication $true;
" was run: "The virtual directory for the mini version of Outlook Web App can't be found in the same Web site.".
The virtual directory for the mini version of Outlook Web App can't be found in the same Web site.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
I already try delete owaVirtualDirectory from adsiedit, Exchange management console, and from IIS manager but still it say virtual directory 'owa'
already exists in my server.
Can anyone help me how resolve this problem?
Thanks.
Best Regards,
Henry StefanusHi Henry,
Even we can’t see /OWA virtual directory in IIS manager, still doesn’t mean it not exists. The IIS configuration files are located in ApplicationHost.config. This file is located in %windir%\system32\inetsrv\config.
Found the below entry even with no owa vdir in IIS manager, remove the entries below and try upgrade again. (Note: Before you modify ApplicationHost.config, please take a backup first.)
<application path="/owa" applicationPool="MSExchangeOWAAppPool">
<virtualDirectory path="/" physicalPath="C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\owa" />
</application>
If the issue still occurs, please do not hesitate to post back.
Best regards,
Eric -
Upgrade Windows 2008 R2 sp1 on an Exchange 2010 SP3 server
I have looked high and low for an answer to this question:
1. I have Windows 2008 R2 running Exchange 2010 SP3
2. Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?
3. Are there pre-requisites for doing this?
4. If so, where can I get the documentation?
I have spent hours looking through Google and Technet. Lots of information about compatibility of 2008 R2 and Exchange SP1 and SP2.
Your wisdom and experience would be appreciated. Thank you!!
CharlieHi,
"Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?"
Yes, you can.
"Are there pre-requisites for doing this?"
There is no pre-requisites, however, as what Idan Vexler mentioned above, downtime is required.
"If so, where can I get the documentation?"
Here are two related threads for your reference.
http://social.technet.microsoft.com/Forums/en-US/1093a91d-aed8-4c91-b538-ca82f5860523/upgrading-windows-2008-r2-enterprise-to-sp1-on-exchange-2010?forum=exchange2010
http://social.technet.microsoft.com/Forums/exchange/en-US/0a7f29a2-04a5-485f-9b0c-061f89b311a5/installing-windows-2008r2-sp1-on-exchange-server-2010?forum=exchange2010
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM
Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DKHello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help! -
Exchange 2010 sp3 rollup 7 fails
Exchange 2010 sp3 rollup 7 fails. This is ran at an elevated prompt and the UAC off. This server is also logged in as the domain Administrator account.
The server currently has rollup 4 SP3 installed. I'm wondering if I should uninstall it, reboot then try the Rollup 7 SP3 update?Hi,
Can you please post the error?
At the same time please check these.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.
Maybe you are looking for
-
D-Link DIR-655 Troubles (N-Router)
Everytime I try to log onto my router (192.168.0.1) I get this : (See Photobucket Pic). It only happens on my G5 (running 10.4.10). You click on either button, nothing ever happens. Just the pinwheel of death forever. I can log on fine with other com
-
Alternative Payee set up in vendor master record for payments....
Hi all, I am facing the problem on alternative payee set up in vendor master record. I have done the following settings but its not working. 1) Created alternative payee vendor (XYZ) and blocked for posting. 2) Created main vendor (ABCD) and given al
-
How to sum from multiple tables on one table?
I have 12 tables covering 4 separate pages in Numbers, with each of the 12 tables summing each row at the bottom of each table. I'd like to take the sums of each of the 12 tables, and sum each of those sums together into one table. For instance, each
-
Report on customers setup as ship to party
Hi, Is there a report which I can execute to get customer details including e-mail address which are setup as Ship-to Party only. If there is no standard report how can I achieve this. Thanks in advance
-
Cannot find Internet Connect Icon
I am using Leopard 10.5.4. I want to setup a VPN connection and found an article which describes how to go about setting the VPN connection. But it uses Internet Connect icon and according to the article it is found in the 'Applications' folder. I ca