Exchange 2010 to Exchange 2013 SP1
I'm on exchange 2010 SP3 with CU4. Can I just download Exchange 2013 Sp1 (i own a license) and prep my domain as if it were the cd and just continue with the migration/installation?
Hi ,
You can proceed with the installation of Exchange 2013 SP1 directly from Exchange 2010 Sp3 Ru4 as Exchange Server 2010 SP3 is the minimum service pack which should be upgraded in Exchange 2010.
You can bring up a new member server and install all the prerequisites from the below website
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
later you can install the Exchange 2013 on new member server where you have prerequisites installed.
Below blog for your reference
http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish
Similar Messages
-
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Applying CU4 for Exchange 2013 SP1 in a mixed 2010 / 2013 Environment
We're planning to apply Exchange 2013 SP1 CU in our mixed 2010 / 2013 environment. We'd also like to apply Exchange 2010 SP3 Rollup 5 as well. Are there any gotchas or best practices on what update to apply first?
Orange County District AttorneyWe are planning to update our 2013 from CU5 to CU8
and 2010 SP3 to Rollup 9
I cant find any official documentation from MS concerning the upgrade path. Example.
Exchange 2013 first, then 2010. Like the above post outline.
I see 2010 being upgraded first thus bring version numbers closer together, reducing incompatibilities.
Do you still feel this is the appropriate install procedure?
Have you done this?
Djoe -
Migrate from Exchange Server 2010 sp3 to 2013 sp1
I have one Exchange Server 2010 SP3 server (300 mailboxes) installed on Windows Server 2008 R2 SP1 with three major roles on it (CAS, MB and HT) - typical installation. Edge Transport server is not installed thus for controlling of mail flow
Symantec Messaging Gateway Virtual Appliance is used as Smart Host. UM server is not installed either. I set up test domain environment where I installed one domain controller (Windows Server 2008 R2 SP1) and one Exchange Server 2010 SP3 (Windows
Server 2008 R2 SP1) at first place and yesterday I did everything necessary to install Exchange Server 2013 SP1 on new test virtual server running Windows Server 2012 R2 which I successfully did.
Now in test domain I have two Exchange Servers (2010 SP3 and 2013 SP1). Is there any 100% reliable documentation with all actions that had to be taken in order to successfully migrate Exchange Server 2010 SP3 to 2013 SP1? I would want to know what
needs to be done not only for my scenario but also for other scenarios (DAG, CAS array, Edge, UM, multiple HT servers . . .) since I am interested in digging deep into Exchange Server 2013.
Hi BoxiKG,
In addition to the above mentioned, and this for your reference:
Upgrade from Exchange 2010 to Exchange 2013
http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
Best regards,
Eric -
Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500
I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request -
Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM
Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DKHello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help! -
Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8
I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequestHi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Exchange 2013 SP1 Installation Errors I Cannot Resolve
Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Exchange 2013 SP1 | Another HTTP 500.0.0 Error
Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support -
Exchange 2013 SP1 readiness check failing
Trying to install our first Exchange 2013 SP1 server on Windows 2012 R2 in our datacentre, the readiness check fails with:
Error:
The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
There are many more errors relating to Enterprise admin rights etc.
Please note that:
My account is Domain admin, Schema admin and Enterprise admin member, it always has been.
I tried the built-in AD Administrator which of course is part of the groups as well, no difference.
Active Directory is at 2008 R2 for domain and forest functional levels.
I tried rejoining the new Exchange designated server to the domain
I've installed RSAT-ADDS, the Managed API 4.0 and all the other windows roles via powershell
There is a local domain controller that is a global catalog server on the new Exchange server subnet
I tried running the Exchange Setup on a different server on the same subnet as where the active 2010 Exchange server resides as well as the FSMO AD role holder resides, this works fine. I even did the AD prep from there no problem, that made no difference
on the datacentre server
AD replicates fine between the FSMO role holder and the Datacentre (no errors in dcdiag or repadmin /showrepl)
This error is in the event log:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetupUI.exe
6724
Get Servers for domain.local
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0475315. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message tableSo I decided to re-install the OS, worked perfectly now. Only difference from before would be:
SCCM hasn't pushed SCEP 2012 to the new build of the same server yet
The original server was installed in a different AD site and then it was physically mode and reassigned to an new AD site and subnet
I might have installed the pre-reqs in a slightly different order (RSAT-ADDS, all the IIS etc things via powershell
and then the UCM API 4.0. (saw few comments that the order of how you install them matters in other forums).
10 or so Microsoft Windows updates haven't installed on the new OS build yet.
Other than that, its identical. But if its not broken don't fix it, perhaps the above can help someone else though. -
Exchange 2013 sp1 move databases
Hello all
I am running Exchange 2013 sp1 in a two node DAG. Originally the DAG had two under powered servers, i built two new more powerful servers added the servers to the DAG, then i moved database copies to the new servers, removed the copies from the original
servers and then removed the original servers from the DAG. The two original servers are multi role (CAS Mailbox) and currently they are still in the org. My confusion is around this. When i run get-mailbox -identity <name>. The output from the command
shows the mailbox is on oldserver. Again oldserver was removed from the DAG and no databases exist on the server. I want to remove the two old servers from the org, but i am hesitant on doing this because all mailboxes seem to think they exist on oldserver
Thanks for any help
Bulls on ParadeYou can ignore that:
http://blogs.technet.com/b/timmcmic/archive/2011/09/26/exchange-2010-homemta-and-msexchhomeservername-are-not-updated-on-mailboxes.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Exchange 2013 SP1 RU4 Public Folder Permissions
Hi All,
Exchange 2013 SP1 RU4 Public Folder Permissions
We have a weird problem after migrating our PF from Exchange 2010 to 2013.
Users do not have permission to create or delete in PF even thou they have owner permissions.
Example:-
I have created a '\test1' folder in the root which has the following permissions (this works OK):-
Myself - Owner
Default - Author
Anonymous - None
I have created another folder '\admin\test2' folder which has the same permissions as above but i get the "cannot create the folder. you don't have appropriate permissions to perform this operation"
I get this problem across all of the folders that were migrated. clean folders created at the root with the correct permission function as per expected.
Regards
Paul SheldonHi,
I recommend you use the Get-PublicFolderClientPermission -Identity publicfolder command to check the client access permissions to a public folder.
If possible, please remove permission and re-add permission to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2013 SP1 and SCOM 2012 R2
Hi there,
Hopefully someone can assist me with this issue, if it is one...
I am halfway through an Exchange migration, from Exchange 2010 SP3 on Server 2008 R2 to Exchange 2013 SP1 on Server 2012 R2.
76 users in total, roughly 80GB of Public Folders.
I have configured the 2013 environment with a cross datacenter DAG, also increased all of the timeouts of the cluster to take this into consideration, and everything appears to function as expected.
Added both 2013 machines to SCOM 2012 R2 for at least a week with no active users on it, and all monitoring reported ok, no issues.
Exchange 2010 is configured to use webmail.company.com for RPC over HTTP, which is what I have configured 2013 to use as well.
Implemented Microsoft ARR for client access to Exchange 2013, as opposed to ISA we've used for Exchange 2010.
A week ago, changed the DNS records for webmail.company.com from ISA to ARR, and all clients connected perfect.
Thought, ok, now we can start the migration. So far everything "seems" to be going perfect with the mailbox moves, however, SCOM is really noisy.
Attempted to reran the probe for EWS and got the error below:
Is there perhaps anyone that can assist me with these errors?
CheersFYI... IIS ARR is not supported for Exchange Server.
Check in event log if you are getting anything related to the issue.
About Outlook POP UP to end users. Check the event log on 2010/2013 for MRS events.
Are those mailboxes still moving or in move request?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Exchange 2013 SP1 Not Receiving e-mail
Hello,
Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working.
Exchange 2013 setup is Exchange 2013 sp1 DVD
Exchange 2010 when sending mail to external it's ok.
Exchange 2010 when sending mail to exchange 2010 users it's ok.
Exchange 2013 when sending mail to External it's ok.
Exchange 2013 when sending mail to exchange 2010 users it's ok.
or
Exchange 2010 when sending mail to exchange 2013 not working
Exchange 2013 when sending mail to Exchange 2013 not working
From internet --> SMTP GW (exh edge) --> Exchange 2010 it's ok
From Internet --> SMTP GW (exh edge) --> Exchange 2013 not working.
organization;
1 AD site and 1 PDC (2012 R2) + 3 DC (1x 2008 R2 + 2 x 2003 Server) (Windows Server 2003 domain fl)
With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 physical machine ( eth Microsoft Team Server 2012 R2 )
All server is region setting Turkey
Exchange 2010 error
451 4.7.0 Temporary server error. Please try again later. PRX4
Exchange 2013 error
451 4.4.0 primary target ip address responded with 501 5.5.4 Invalid arguments. attempted failover to alternative host, but that did not succeed. either there are no alternate host, or delivery failed to all alternate hosts. Th
thanksHi,
From your description, the Exchange 2013 server can't receive emails internally and externally. I recommend you follow the steps below for troubleshooting:
1. Please restart the Microsoft Exchange Frontend Transport service on CAS and the Microsoft Exchange Transport service on Mailbox and check the result.
2. Please make sure that the authentication on default receive connector is right. Here is the configuration in my environment for your reference:
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Exchange 2013 SP1 and CUCM 9.1.2 - Exch not recognizing called extension
I think I'm almost there in getting Exchange 2013 SP1 UM working with CUCM 9.1.2...I've got two issues at the moment that I need a little help with.
1) When I dial my VM pilot (6040) from a UM enabled extension it prompts to enter an extension. When I dial the same extension and let it ring to VM, Exchange picks up and says "the person you are trying to reach does not have a valid voice mail box
on our system".
2) This just started happening this afternoon, when I dial my VM pilot (6040) exch3 picks up as thats what I have my route pattern pointing to. If I enter the extension of a mailbox on exch2, I get stuck in a endless loop.
I've followed this post as a guide but it hasn't resolved my issue.
https://supportforums.cisco.com/discussion/11914031/exchange-2013-um-and-cucm-86
My Exchange environment looks like this:
Site 1:
exch1 - CAS/Mailbox, used for mainly utility type work, journal, dedicated SMTP flows etc
exch2 - CAS/Mailbox, part DAG13
exch3 - CAS/Mailbox, part of DAG13
Site 2:
exch2dr - CAS/Mailbox, part of DAG13
exch3dr - CAS/Mailbox, part of DAG13
DAG13 is stretched between two sites, there are no users at our DR site so CUCM is pointing to Site 1 for UM. Each site has an internet facing CAS-only server for OWA/EAS etc.
Any help is greatly appreciated. I'd love to get rid of Unity.
EDIT:
I just found this event in the event logs:
The Microsoft Exchange Unified Messaging service on the Mailbox server received a diverted call with ID "d51600-3a3140c5-9b8-c1414ac@EXCH3-IPADDR" for extension "4099" on UM dial plan "CUCM" from UM IP gateway "CUCM IP",
but no UM-enabled mailbox for the corresponding extension could be found. Please check the extension and make sure that the corresponding mailbox is enabled for UM and associated with the correct UM dial plan.9.1.2 I think it is, we upgraded to avoid the known DNS bug
I cant see how to PM you either
The crux of it was outlined below with some tweaks
http://blogs.technet.com/b/canitpro/archive/2014/04/30/step-by-step-integration-between-exchange-2013-um-and-cisco-unified-communication-manager.aspx
As we have multiple combined role servers, our trunks are set up as follows:
1. 1 x CAS Trunk - contains all CAS Servers on port 5060
2. 4 x MBX Trunks - contains Maibox Server with ports 5062-5068
On top of that, we had to Allow "Redirecting Diversion Header Delivery - Inbound (and Outbound)" on the CAS Trunk but DISABLE it on the Mailbox Trunks
Also, make sure that you are using Telephone Extension Dial plans in Exchange 2013 (Despite them being unable to be associated with a 13 Server - EX13 answers for all calls anyway)
Lastly, the MS documentation is a little strange - it says that as your last step of UM migration, you should point your Call Manager to 2013 - I don't agree with that statement, EX13 routes calls back to 2010 UM Servers perfectly fine, so treat it the same
as any other CAS based service - point to 2013, and it will handle the rest
Maybe you are looking for
-
Memory leaks- high memory usage svchost.exe
hello! im having a kind of a similar problem. Im using a Q6600 with 4Gb of RAM running on Windows 7 x64. My physical memory usage history is 1.75GB idle but my CPU usage looks good ~ 0%. In Windows Task Manager when i arranged the memory column, the
-
I have been using the mac for quite some time with a logitech 2.1 speaker system. Use was fine for a considerable amount of time, until one day I noticed there was no sound going to left speaker. I have checked the balance for line out in System Pref
-
Adobe Acrobat X Pro Extracting Issue
When the download manager was trying to extract the Adobe Acrobat X Pro files to my computer folder, the following message suddenly popped out: A problem occured while extracting some files. Check available space on your computer and the write privel
-
SCCM 2012 Reports stopped working
Reports were working fine then when I tried again about an hour later I suddenly got the following error: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occur
-
I-tunes web page display japanese language and unreactive
My i-tune web page is displayued in Japenese and I attempted to use the Edit - Preference -Language option but doesn't help. The page is does not react when I click on it. I attempted to update the i-tunes but that didn't help.