Exchange 2010. Unable to access block list IP's in Hub Transport Service.

Just started today as I was getting ready to add an IP address to the IPBlock list. Box pops up that says 'failed to enable key constraints. One or more rows contain values violating non-null, unique or foreign-key constraints.' The only
thing I have seen mentioned running the Get-IPBlockListEntry command because there was a duplicate IP address in the list. When I ran the command, there were 600+ entries, but I can only read the last 350 of them. There are no duplicates however
in the entries I can see.
My questions are:
is there a hard limit to how many ip addresses can be added into the block IP list box?
Is there a command that would search for duplicate addresses, and if not, is there another way to take care of the issue besides uninstalling and reinstalling the exchange anti spam agent?
How do I get to see the first 250 entries in the results from the exchange management shell?
Thanks for your help!

Hi,
Please refer to the following steps to reinstall anti spam agent:
1. Open EMS, type:
cd "c:\program files\Microsoft\exchange server\v14\scripts"
./uninstall-antispamagentss.ps1
2. Restart the Exchange transport service.
3. Go back to EMS, type:
./install-antispamagent.ps1
4. Restart the Exchange transport service.
If the problem still happens, please restart Exchange hub server
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Exchange 2010 .Disable external access for Autodiscovery and RPC

Hi Team,
Once i publish my Owa page in exchange 2010 .Automatically i was able to access.
https://domainname.com/autodicovery
https://domainname.com/rpc
https://domainname.com/owa/oma
I need to block access from external world to these websites.Pls help

Hi,
Before we go further, I'd like to confirm if you want to block external Outlook access. If yes, we can disable Outlook Anywhere since external Outlook access use Outlook Anywhere to connect to server.
Additionally, there are three methods for external Outlook users to connect to Autodiscover service. If we don't add public A record and SRV record, Autodiscover cannot work.
And we can separate web sites for internal access and external access and don't add Autodiscover and RPC virtual directories in the external access web site. and here is an article about OWA virtual directory, and you can refer to the article for Autodiscover
and RPC:
http://blogs.technet.com/b/messaging_with_communications/archive/2011/05/02/how-to-block-owa-for-external-users.aspx
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 Initialization failed Access is denied

Hi
I try to run EMC but cannot run due for this error message appear
Initialization fail
The following error occurred while searching for the on-premises Exchange server:
[server.pc.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help Topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)".
Can anyone help me out on this Im new to Exchange 2010 and this is my first installation and come up with this error.

Hi
Access denied error. is your account a full admin in exchange? Can you right click the EMC and run as administrator?
did you do a reboot after your installation?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exchange 2010 unable to find objects in child domain via ESM

I am having a problem on Exchange 2010 which relates to mailboxes whose AD account is in a child domain in the AD forest.
We have two domains A & B in the forest. The site which hosts E2010 only has DCs from domain A (root domain). These DCs are set as Global Catalogues.
All Exchange servers (2 x CAS & 2 x Mailbox) installed in Domain A (primary site) can resolve domain B and performing nslookups for domain B on these server displays the DCs installed
in domain B at remote sites.
I am migrating some resource mailboxes with AD accounts in domain B and need to set them up as room mailboxes to enable the auto accept bookings feature.
After migrating the mailboxes via the EMS to set the mailbox as a room, below is the error I get:
[PS] C:\Windows\system32>set-mailbox mtgrm1@domainB
-Type Room
The operation couldn't be performed because object 'mtgrm1@ domainB' couldn't be found on 'DC01.domainA.com'.
    + CategoryInfo          : NotSpecified: (0:Int32) [Set-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 9E6F6A1,Microsoft.Exchange.Management.RecipientTasks.SetMailbox
I have also tried using only the alias and the object CN:
set-mailbox mtgrm1 -Type Room
set-mailbox –identity 'domainB/Sitename/ Users/MSX Resource Accounts/Conf MtgRm1 (Video)' -Type Room
but get the same error.
All employee mailboxes from Domain B have been migrated to Exchange 2010 from 2003 and are working with no problems.
I have confirmed domain B has been prepared for E2010 - In the Microsoft Exchange System Objects container in AD there is the global group Exchange Install Domain Servers.
Event ID 2080
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1864). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
dc02.domainA.COM
CDG 1 7 7 1 0 1 1 7 1
DC01.domainA.com
CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
DC03.domainA.COM
CDG 1 0 0 1 0 0 0 0 0
dc04.domainA.COM
CDG 1 0 0 1 0 0 0 0 0
Please note the Out of site DCs are for our Exchange failover site which is currently down due to the storms on the East Coast.
Does Exchange 2010 require a local DC for the second domain installed in the sites which host Exchange? If not, any advise on what else I can look at will be appreciated.
Thanks.

Hi there,
If the questions is answered, please mark it accordingly. Thanks.
Fiona Liao
TechNet Community Support

Outlook 2013/Exchange 2010 Free/Busy access issues.

Good Day Everyone,
I am running a Win 2008 R2 environment with Win7 users, using Exchange 2010 and Outlook 2013. Last week my users started experiencing issues with being able to view Free/Busy in the Calendar for any other user. I have checked past issues with this with patches
KB 2837618 and KB 2837643. Neither patch is showing as installed and I have tried a nummber of the suggested fixes offered for that issue to no avail. OWA seems to be working just fine.
Our Outlook version is: 15.0.4605.1003
I need a fix for Outlook users and since I havve 140 users, individual fixes are a not realistic option.
Any assistance would be greatly appreciated.

Hi,
Please test if Out of Office feature works well in Outlook. If Out of Office doesn't work either, it should be Autodiscover related.
Once Autodiscover has not been configured properly, the Free/Busy information may not display correctly. If you are also seeing issues with Out of Office assistant, we may assume that you haven’t correctly setup Autodiscover, since these two symtoms are
common when Autodiscover is not configured correctly.
To verify that, please test Outlook Autodiscover Connectivity:
http://technet.microsoft.com/en-us/library/bb123573.aspx
We can also learn Configure Exchange Services for the Autodiscover Service from:
http://technet.microsoft.com/en-us/library/bb201695.aspx
Regards,
Melon Chen
TechNet Community Support

Exchange 2010 Unable to create new mailboxes through provisioning

Recently I started noticing that when attempting to create a new mailbox in Exchange 2010 I was receiving the error "Load balancing failed to find a valid mailbox database". I checked the provisioning by running the command "Get-MailboxDatabase
| ft Name,IsExcludedFromProvisioning". All my databases are set to "true". All I would have to do is run the command "get-mailboxdatabase | set-mailboxdatabase -isexcludedfromprovisioning $false" to enable the provisioning again. My
question is here, does this require any kind of reboot or setting the DAG into maintenance mode? These are prod servers and I would hate to run a command that might cause an unplanned downtime of any sort. I got a feeling that this is probably a quick simple
command and wont cause any issues, just want to confirm that this won't require any sort of planning before running.

No, you don;t have to restart the server or make any changes in DAG.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2010 Unable to Assign Full Access Permissions using a Security Group

I've been running into this issue lately. I cannot seem to use groups to allow full access to mailboxes. When I add them from the EMC, it will show up when you go to "Manage Full Access Permission...". After waiting a day and even restarting
the Information Store service, the permissions do not take effect. When I view the msExchDelegateListLink attribute of the mailbox account, the group is not listed.
When I grant a user full permission, it works and updates the attribute. However, on occasion when I revoke the full access permission for a user is doesn't always remove that user from the msExchDelegateListLink attribute. So the mailbox
will still appear in Outlook, but the user isn't able to see new emails.
Any ideas on what may be going wrong?
Environment:
Exchange Server 2010 SP1 Standard
Windows Server 2008 R2 Standard
Outlook 2010 SP1 (tried without SP1 as well)
I was looking over Add-MailboxPermission on Technet (http://technet.microsoft.com/en-us/library/bb124097.aspx) and I noticed that it doesn't mention adding groups. Is this not possible?

I never got a proper fix.
I worked around it by creating a script which gets the members of an AD Mail Enabled security group, and updates the full access based on the groups members.
Here's a script I'm running every hour which updates permissions. It's probably not the most efficient script ever, but it works. It has several benefits
1. Managers of the distribution group can add/remove mailbox members using OWA or through the address list
2. New members of groups are added to FULL Access Permissions
3. Members removed from the groups are removed from FULL access permissions
4. Automapping works :)
5. Maintains a log of access added / removed / time taken etc.
Obviously I have had to remove domain related information, replace with whatever your domain requirements are, and PLEASE debug it properly in your environent first, don't complain to me if it wipes out a load of access for you or something like that!
It takes about 5 minutes to run in my environement. Some formatting seems to have got messed up on here, sorry. I hope it is of use!
# Mailbox Permissions Setter for Exchange #
# v1.1 #
# This script will loop through all mailboxes in Exchange and find any where #
# the type is 'SHARED'. These should be determined to be a GROUP/SHARED mailbox #
# and access to these mailboxes are controlled by a single ACL, e.g. 'ACL_Shared_Mailbox'. #
# This script will add any members of these ACLs directly to the Full Access Permissions #
# of the mailbox and also remove them if they no longer need the access. #
# Script created by Jon Read, Technical Administration
# Recent Changes
# 15/11/2012
# 1.1 Added exclusions for ACLs that we don't want automapping to happen for
# 12/11/2012
# 1.0 Initial script
#Do not change these values
Add-PSSnapin *Ex*
$starttime = Get-Date
$logfile = "C:\accesslog.txt"
$logfile2 = "C:\accesslog2.txt"
$totaladditionstomailboxes = 0
$totalremovalsfrommailboxes = 0
$totalmailboxesprocessed = 0
$totalmailboxesskipped = 0
# Exclude any ACLs that shouldn't be processed here if they are used for a non-standard purpose and
# we don't want FULL access mapping to happen. Seperate array values with commas
$ExcludedACLArray = "DOMAIN\ACL_ExcludedExample"
Write-Output " " >> $logfile
Write-Output " " >> $logfile
Write-Output "#----------------------------------------------------------------#" >> $logfile
Write-Output "# Mailbox Permissions Setter for Exchange #" >> $logfile
Write-Output "# v1.1 #" >> $logfile
Write-Output "#----------------------------------------------------------------#" >> $logfile
Write-Output " " >> $logfile
Write-Output " " >> $logfile
Write-output "Start time $starttime ">> $logfile
Write-Output " " >> $logfile
Write-Output " " >> $logfile
# Set preferred DCs and GCs
$preferredDC = "preferredDC.domain"
$preferredGC = "preferredGC.domain"
Write-Output " PreferredDC = $preferredDC ">> $logfile
Write-Output " PreferredGC = $preferredGC " >> $logfile
Set-ADServerSettings -PreferredGlobalCatalog $preferredGC -SetPreferredDomainControllers $preferredDC
# The first part of this will ADD permissions to the mailbox, reading from an associated ACL.
# Check for all mailboxes where the type is SHARED. These are the only ones we would
# want to apply group mailbox permissions to.
foreach ($mailbox in get-mailbox -resultsize "unlimited" | where-object {$_.RecipientTypeDetails -eq "SharedMailbox"})
$totalmailboxesprocessed = $totalmailboxesprocessed + 1
Write-Output " " >> $logfile
Write-Output " " >> $logfile
Write-Output "|-------------------------------------------------------" >> $logfile
Write-Output "| MAILBOX ADDITIONS: $mailbox " >> $logfile
Write-Output "|-------------------------------------------------------" >> $logfile
$mailbox=$mailbox.ExchangeGuid.ToString()
# For each of them, get the distribution list applied to the mailbox (Starting DOMAIN\ACL_)
# We then need it to be turned into a string to use later.
#Declared $changes as 0. if this is set to 0 at the end of the mailbox job, we know no changes were made.
$changes = 0
foreach ($distributiongroup in get-mailbox $mailbox | Get-MailboxPermission | Where-Object {$_.User -like "DOMAIN\ACL_*" })
$skipACL = 0
#Get the distribution group and put the name in a useable format
$distributiongroup=$distributiongroup.user.tostring()
Write-Output "Found ACL $distributiongroup" >> $logfile
# Check if this distribution group needs to be excluded and if it shouldn't be processed
# then move onto the next ACL. This will stop FULL access being granted if the mailbox is
# used for a non-standard purpose. See the start of this script
# for where these are excluded (ExcludedACLArray)
foreach ($ACL in $ExcludedACLArray )
if ($distributiongroup -eq $ACL)
$skipACL = 1
Write-Output "ACL $distributiongroup is excluded so skipping mailbox " >> $logfile
$totalmailboxesskipped = $totalmailboxesskipped + 1
if ($skipACL -eq 0)
# Get each user in this group and for each of them, add try to add them to full access permissions.
foreach ($user in Get-DistributionGroupMember -identity $distributiongroup)
# Get the user to try, convert to DOMAIN\USER to use shortly
$user="DOMAIN\" + $user.alias.ToString()
# Check to see if the user we have chosen from the ACL group already exists in the full access
# permissions. If they do, set $userexists to 1, if they do not, leave $userexists set to 0.
# Set $userexists to 0 as the default
$userexists = 0
foreach ($fullaccessuser in get-mailbox $mailbox | Get-MailboxPermission)
# See if the user exists in the mailbox access list.
# Change $fullaccessuser to a useable string (matching $user)
$fullaccessuser=$fullaccessuser.user.tostring()
if ($fullaccessuser -eq $user)
$userexists=1
# Break out of foreach if the user exists so we don't unnecessarily loop
break
# Now we know if the user needs to be added or not, so run code (if needed) to add
# the user to full access permissions
if ($userexists -eq 0)
Add-MailboxPermission $mailbox –user $user –accessrights "FullAccess"
Write-Output "Added $user " >> $logfile
$changes = 1
$totaladditionstomailboxes = $totaladditionstomailboxes + 1
#Now repeat for other users in the ACL
#if changes were 0, then log that no changes were made
if ($changes -eq 0)
Write-Output "No changes were made." >> $logfile
Write-Output " " >> $logfile
Write-Output " " >> $logfile
Write-Output "---------------------------------------------------------------------------------" >> $logfile
Write-Output " FINISHED ADDING PERMISSIONS" >> $logfile
Write-Output "---------------------------------------------------------------------------------" >> $logfile
Write-Output " " >> $logfile
# The second part of this will REMOVE permissions from the mailbox, reading from an associated ACL.
## Check for all mailboxes where the type is SHARED. These are the only ones we would
## want to apply group mailbox permissions to.
foreach ($mailbox in get-mailbox -resultsize "unlimited" | where-object {$_.RecipientTypeDetails -eq "SharedMailbox"})
Write-Output " " >> $logfile
Write-Output " " >> $logfile
Write-Output "|-------------------------------------------------------" >> $logfile
Write-Output "| MAILBOX REMOVALS : $mailbox " >> $logfile
Write-Output "|-------------------------------------------------------" >> $logfile
$mailbox=$mailbox.ExchangeGuid.ToString()
#Declared $changes as 0. if this is set to 0 at the end of the mailbox job, we know no changes were made.
$changes = 0
# For the current mailbox, get a list of all users with FULLACCESS, and then for each of them
# check if they exist in the ACL
foreach ($fullaccessuser in get-mailbox $mailbox | Get-MailboxPermission | Where-Object {$_.Accessrights -like "FullAccess" })
# Get the security identifier (SSID) of the FULLACCESS user to store for later.
$fullaccessuserSSID=$fullaccessuser.user.SecurityIdentifier.ToString()
$fullaccessuser=$fullaccessuser.User.ToString()
#If user needs to be excluded then skip this bit
#Users added or removed will only start with 07 (07$, 07T, so only run if the user starts with this.
#This stops it trying to remove NT AUTHORITY\SELF and other System entries
if ($fullaccessuser -like "DOMAIN\07*")
# Set $userexists to be 0. if we find the use user needs to remain, then change it to 1.
$userexists=0
# Check if this user exists in the ACL, if not, remove.
foreach ($distributiongroup in get-mailbox $mailbox | Get-MailboxPermission | Where-Object {$_.User -like "DOMAIN\ACL_*" })
$distributiongroup=$distributiongroup.user.tostring()
#Write-Output "Found associated distribution group $distributiongroup" >> $logfile
# Get each user in this group and for each of them, See if it matches the user in the mailbox.
foreach ($user in Get-DistributionGroupMember -identity $distributiongroup)
# Get the user to try, convert to DOMAIN\USER to use shortly
$userguid = $user.Guid.ToString()
$user="DOMAIN\" + $user.alias.ToString()
if ($fullaccessuser -eq $user)
$userexists=1
#we have found the user exists so no need to continue
break
# If userexists = 0, then they are NOT in the ACL, and should be removed from
# the full access permissions. Run the code to remove them from full access.
#CONVERT FULLACCESSUSER TO GUID AND REMOVE $FULLACCESSUSERGUID NOT $USERGUID
if ($userexists -eq 0)
Remove-MailboxPermission -Identity $mailbox –user $fullaccessuserSSID –accessrights "FullAccess" -Confirm:$false
Write-Output "Removed $fullaccessuser " >> $logfile
$changes = 1
$totalremovalsfrommailboxes = $totalremovalsfrommailboxes + 1
# if changes = 0, no changes were made to this mailbox, so log this fact.
if ($changes -eq 0)
Write-Output "No changes were made." >> $logfile
#Put the time in a displayable format
$endtime = Get-Date
$runtime = $endtime - $starttime
$runtime = $runtime.ToString()
$runtime1 = $runtime.split(".")
$totaltime = $runtime1[0]
Write-Output " " >> $logfile
Write-Output " " >> $logfile
Write-Output "|-------------------------------------------------------------------------------------- " >> $logfile
Write-Output "| SCRIPT COMPLETE : STATS " >> $logfile
Write-Output "|-------------------------------------------------------------------------------------- " >> $logfile
Write-Output "| Total Mailboxes Processed : $totalmailboxesprocessed " >> $logfile
Write-Output "| Total Additions : $totaladditionstomailboxes " >> $logfile
Write-Output "| Total Removals : $totalremovalsfrommailboxes " >> $logfile
Write-Output "| Total Mailboxes Skipped due to ACL : $totalmailboxesskipped " >> $logfile
Write-output "| Start time : $starttime ">> $logfile
Write-output "| End time : $endtime ">> $logfile
Write-Output "| **END OF RUN** - Elapsed time : $totaltime " >> $logfile
Write-Output "|---------------------------------------------------------------------------------------" >> $logfile
Write-Output " " >> $logfile

Network Place to SharePoint 2010 unable to access sub sites with error: "The folder may have been moved or deleted".

I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise. Everything seems to be working fine for the site, but there is one issue. The problem I am running into
is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
"Documents in this folder are not available. The folder may have been moved or deleted, or network problems may be preventing a connection to the server. There is a problem with the web server. Please try again later or contact the
server administrator."
If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries. This seems to affect all of the sub sites on my site. Explorer view works if that information is required and I do not get
error messages using Explorer view.
Thanks in advanced for any help on this.
-Thao

Hi pei jingw,
You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
Best,
Sara

Unable to access Wish List

For over a week I have not been able to access my wish list. I get an error message every time I try. Any ideas on what is going on?

Thank you for your reply.
I contacted the iTunes store costumer support, and after a number of e-mails where they wanted me to explain the problem in more detail (even though there wasn't much detail to talk about) I finally got the advice to reinstall iTunes.
I did this by deleting the iTunes app, the cash files, and the preference files. (but not my library, that would have been to much hassle) Downloading iTunes with my web browser from the apple site, and then installing it again.
I didn't though it would help, but it actually did. The problem is now gone for me.
And it seems the price of some items did actually change, a slightly different price was shown after this procedure.

Exchange 2010 - unable to connect coldfusion

Unable to connect to the Exchange server using HTTP/HTTPS protocol.
HTTP response code : 400
I have some Coldfusion code that used to work to add calendar events on behalf of a user. The Exchange server is hosted at intermedia.net. I've beat this code to death to no avail. I could use a little hand-holding now.

Hi,
According to your description, you use some Coldfusion code to add calendar events on behalf of a user.
If I misunderstand your meaning, please feel free to let me know.
If yes, agree with ED said, I recommend you ask for more professional help on our development forum.
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Unable to access song list in ipod when connected to the computer.

My daughter loaned her ipod to a friend who tried to download some music to her ipod. A box opened asking if she wanted to delete all her songs from her ipod and she was given yes, no, and cancel. She pushed cancel and got out.
My daughters ipod has not worked correctly since.
When connected to the computer and logged into iTunes she can see all the songs in her ipod but they are light in color and she can not play or pick songs from the list. She can't delete anything from her list in the ipod. She can play her music from the computer list just fine.
What has happened and can we somehow get her ipod back to working correctly?

Hello jhfields,
So, you are saying that you are unable to pick and choose songs from the Music list for the iPod while it is plugged into iTunes?
If the songs are grayed out, it is probably because the iPod is set up to automatically sync. In order to play music from the iPod through iTunes, you have to enable the "manually manage music and videos" option from under the iPod's Summary tab.
Does that do the trick for you?
B-rock

Exchange 2010 and Client Access Server Roll

Hi,
We have one CAS/HUB server, two mailbox roll servers in a DAG. Both mailbox roll servers have public folder database and both are replicate each other. Now we are going to office365. Now we
need to install client access roll on public folder database server(mailbox roll server) for office365 users to access the public folder from on premises according to
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
We don't want get any problem after installing another CAS server roll. Our users' outlook should not interrupt with new installation. We are not setup client access array here. We are installing
this for public folders access to office365 mailboxes. How to install and configure?
Please help us to achieve this.
Thanks & Regards.

http://public.wsu.edu/~brians/errors/role.html
Exchange 2013 doesn't have a public folder database. If you're asking about an older version of Exchange, the Exchange previous versions forums are here:
http://social.technet.microsoft.com/Forums/en-US/category/exchangeserverlegacy
You shouldn't have any problem installing the CAS role. To be sure, after installing the server change all the URLs in the virtual directories to point to one of the real CAS servers, and run Set-ClientAccessServer -AutodiscoverServiceInternalUri to
to a valid Autodiscover URL.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Email address missing from account info in Office 365 exchange console, unable to access inbox

Hi
we have successfully migrated our on premise Exchange environment to Office 365. We came from a 3 domain environment and we are having some issues accessing accounts. I have tried to add the smtp:[email protected] address using ADSI Edit but after
DirecSync, I'm not able to locate this address on the account. is there a different way to add email address to Office 365 accounts?

I would recommend asking them in Office 365 forum: http://community.office365.com/en-us/f/default.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Users moved from Exchange 2007 to Exchange 2013 unable to access mails on the mobile devices

New mailbox if created on Exchange 2013 works fine. But moved users from Ex2k7 to EX2k13 do not works. Here are the errors on the exchange server 2013 IIS logs:
For android -- DevOS:Android_S110_Error:System.ArgumentOutOfRangeException_ADWR
For iphone -- DevOS:iOS+8.1.1+12B436_S110_Error:System.ArgumentOutOfRangeException_As
Exhange 2013 is on Cumulative update CU6
Any clue.

Hi,
have you tried to recreate activesync profile?For IOS devices you could try to reset Network setting by doing the following:
Settings
General
Reset
Reset network settings
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Exchange 2010. Unable to access block list IP's in Hub Transport Service.

Similar Messages

Maybe you are looking for