Exchange 2010 upgrade issue

dear
we are in the process to upgrade our exchange 2003 to exchange 2010, our domains are 2003 and the functional level is 2003.
every time i run the pre deployment analyzer i get this massage
Active Directory site 'SITENAME' does not contain any global catalog servers running Windows Server 2003 Service Pack 1 or later. This will prevent Exchange 2010 servers from
being installed into site 'SITENAME'.
can any one help me

Hi,
Based on my research, Exchange Best Practices Analyzer v2.8 should not be used to scan Exchange Server 2007 and Exchange Server 2010. In Exchange Server 2007 and Exchange Server 2010, the Best Practices Analyzer is installed during Exchange Setup and can
be run from the Exchange Management Console Toolbox. Thus, I’d like to confirm your BPA version:
http://social.technet.microsoft.com/Forums/exchange/en-US/158f4eca-917b-455c-9a99-5294f601e75b/exchange-bpa-28?forum=exchangesvrdeploylegacy
And here is a more similar thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/83798a09-51ca-4c7c-9cc2-63f8ccd2f181/migration-to-exchange-2010?forum=exchange2010
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Exchange 2013 co-existence with Exchange 2010 proxying issue.

Hello,
I am testing Exchange 2010 and Exchange 2013 co-existence in my test lab at the moment, with
a view to migrating our production environment to 2013 later in the year.
The lab is setup, and the problem I'm having is that internal Outlook clients cannot open
their respective mailboxes once the 2013 CAS server is introduced into the mix.
The
setup is listed below:
EXCHANGE 2010 Servers
TESTLABEXCH01 - CAS,HT,MBX - Exchange 2010 SP3
TESTLABEXCH02 - CAS,HT,MBX - Exchange 2010 SP3
Both servers are part of a CAS Array - casarray01.testlab.local
Both servers are part of a DAG - DAG01.testlab.local
RpcClientAccessServer on all 2010 databases set to casarray01.testlab.local
The A record for casarray01.testlab.local points to the IP of the VIP of a load balancer.
The loadbalancer serves
the following ports: 25,80,443,143,993,110,995,135,60200,60201
OutlookAnywhere is enabled on both servers:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods   : {Basic, Ntlm}
Internal and external mail flow works without issue before the 2013 server is introduced.
Internal and external client access works without issue before the 2013 server is introduced.
Part Two to follow.....
Matt

EXCHANGE 2013 Servers :
TESTLABEXCH03 - CAS,MBX - Exchange 2013 SP1
OutlookAnywhere is enabled on the server:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods   : {Basic, Ntlm}
RpcClientAccessServer on all 2013 databases set to casarray01.testlab.local
(This an inherited setting I assume from the pre-existing 2010 organization)
Split DNS is in place and all internal/external URL's point to either:
autidiscover.external.com
mail.external.com
The A record for the mail.external.com points to the IP of the load balancer VIP
The CNAME record for autodiscover.external.com points to mail.external.com
When the TESTLABEXCH03 is added to the load balancer config,
and given highest priority this is when the Outlook clients stop working.
Any existing profiles in Outlook 2010/Outlook 2013 can no be opened as there is a persistent
credentials prompt.
Upon trying to create a new profile, the process errors when reaching the "Log onto server"
stage and again prompts for credentials.
Running the test-outlookconnectivity cmdlet from
either of the 2010 servers produces the following results.
[PS] C:\Windows\system32>Test-OutlookConnectivity -Protocol:http
ClientAccessServer   ServiceEndpoint
Scenario                            Result Latency
TESTLABEXCH02 autodiscover.external.com    Autodiscover:
Web service request. Success 343.20
TESTLABEXCH02 casarray01.testlab.local       RpcProxy::VerifyRpcProxy.
Success    0.00
TESTLABEXCH02 casarray01.testlab.local         RFRI::GetReferral.
Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local        NSPI::GetProfileDetails.
Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Connect.                   Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Logon.                     Skipped   -1.00
If remove the 2013 CAS server from the loadbalancer config and
all connections go directly to the 2010 servers again, all of the above tests pass and Outlook connectivity is also restored.
IIS has been reset on all 3 servers incidentally, following any changes made whilst troubleshooting.
I'm struggling to see what I'm missing here, if anyone can assist in troubleshooting this
matter further, or point out any errors in my setup it would be greatly appreciated.
Regards
Matt
Matt

Exchange 2010 - Database issues

Good morning everyone!
I have an exchange database problem. It was first caught when implementing exchange backups with Acronis backup software.
(EXCHANGE 2010 v 14.01.0218.013)
So the backups fail one night and succeed the next. But each time it fails we get 4 errors (Consistency related). Also the database size is growing rapidly. Here are the errors:
Then a couple more:
EVENT ID 9782
Exchange VSS Writer (instance b1bfbf43-9594-4cee-980f-50d84b0ee4eb:76) has completed the backup of database 'xxxxxxxxx' with errors. The backup did not complete successfully, and no log files were truncated for this database.
Then finally:
EVENT ID 2007
Information Store (2136) Shadow copy instance 76 aborted.
For more information, click http://www.microsoft.com/contentredirect.asp.
EDIT:
SO my DB is not growing because the issue...I had forgotten that we enabled LEGAL HOLD. But my backups fail / succeed / fail / succeed.
Any ideas on this?
Kevin

Hi,
Please use Windows Server backup to backup the Exchange database to check result.
If Windows Server backup works well, I recommend you contact the third party support to confirm this issue.
If the issue persists, please check whether your database is dirty shutdown. If it's dirty, please bring to clean state and backup agian to check result.
Best regards,
Belinda Ma
TechNet Community Support

Exchange 2010 RPC issue, "The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process"

Hi All,
this is the first time iv had to post on here on a forum since ive been doing IT but here goes.
Server background:
SBS 2011
Exchange 2010 SP3 RU6
Installed 2 years ago and has run relatively smooth since installation
Possible Cause: a recent application that had created a virtual directory in IIS.
Issue:
A user recently reported an issue with Outlook Anywhere, i did an exchange connection test and reported the following error
The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 3834 ms.
Fixes Tried so far
- Reg fix for ports 6001,6002,6004
- Telnet 127.0.0.1 6001 all returns expected results
- Disable RPC then Re-enable via the management console
-Ran fix my network wizard which has shown an error in compenent 3 which it fixed
Component ID #3
If the Fix My network wizard shows that component ID #3 is broken, this means that within IIS the RPC virtual directory settings are incorrect.
Continuing to fix this error within the wizard will correct the RPC virtual directory to support both Basic and NTLM authentication to this virtual directory.
Any suggestions would be great as im running out of ideas, i have thought about rebuilding outlook anywhere but unsure of the implications on an SBS

Hi,
In order to check whether it is an RPC Virtual Directory issue, you can open IE and input:
Https://mail.domain.com/RPC/RPCProxy.dll
After inputting the credential, the expected result is a blank page. If not, I means the issue resides on the RPC VD. You can try rebuilding the RPC VD for the first try.
Thanks,
Simon Wu
TechNet Community Support

CUC 8.5.(1) with Exchange 2010 TTS issue

Hi,
I'm configuring CUC 8.5(1) ( 2 servers in HA ) with MS Exchange 2010 ( one server in a MS domain ).
Single inbox works well, so voice recognition.
I'm now trying TTS but i'm encountering some problems.
Feature is licensed, so i enabled it in the class of service and flagged the allow user to access voice mail
using imap client and\or single inbox. Also at user level the proper configuration is done.
I followed the official guides about it and all recall to a 8.0 with exchange 2007 way to enable imap access
using external services and external services accounts.
My issue is that i don't have these voices in my system settings of my CUC.
Where should i point my attention to get it work? The environment is only internal so exchange is not configured
for TSL, is it mandatory to have it enabled? How should i access emails in TTS mode by phone? I tried the
voice mail interface but it doesn't speak about emails, only voicemail.
Is there any step by step guide correct\update for exchange 2010?
Thanks to all for your help, i'm at a stuck and i need this feature working in a few days.
Michele

Thanks a lot Brad,
All is working, just a couple of question, i'm also using voice recognition, it works but it doens't has the
play external messages option, is there any specific i have to set or say?
The touchtone command in my classic conversation is not 7 but i have to execute a little procedure following the
menu, somenthing like 0 --> 9 --> 1 ---> 7 ( external message option ) --> 1
Is there any way to change or abbreviate this ?
Thanks again
Michele

Case of the Missing User Exchange 2003 - Exchange 2010 Migration issue

Hey All,
I am in the middle migrating from Exchange 2003 to Exchange 2013 by way of Exchange 2010 and going through the final parts of my Exchange 2010 portion of the migration I found that one of the users on Exchange 2003 is not showing up in the EMC to migrate.
In EPS I can find the user with Get-User username but I cannot get the mailbox or kick off the mailbox move from EPS giving me the error of "Object could not be found" It is a valid user with a valid user mailbox and I can log into the
mailbox in OWA for Exchange 2003. Any thoughts as to why the user's mailbox is not showing in EMC or that I can't get it to move via PS?
Thanks,
Joe

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Exchange 2010 RBAC issues

I am trying to create an Exchange 2010 RBAC role group for our service desk. I have created a test management role group "Service Desk staff" and assigned the below roles using the Exchange Control Panel:
Distribution Groups
Mail Enabled Public Folders
Mail Recipient Creation
Mail Recipients
Public Folders
Then I access Exchange 2010 via the Exchange Management Console from a client PC with a user account that is in the Management Role Group I created.
I am able to do most tasks such as create/modify distribution groups, create mailboxes and edit the properties of it.
But for some reason I cannot perform the below:
1. Trying to add/remove members from a Distribution group results in an error
Add-DistributionGroupMember
or
Remove-DistributionGroupMember
2. Trying to create a Public folder results in an error:
MailExceptionNoCreateSubfolderRight: Unable to create folder.
(hr=0x80070005 ec=1282)
3. Trying to mail enable/disable a Public folder results in an error:
MapiExceptionNoAcess: Unable to set properties on object.
(hr=0x80070005 ec=2147024891)
4. Changing permission of Public Folders results in an error:
MapiExceptionNoAcess: Unable to modify table.
(hr=0x80070005 ec=2147024891)
Can anyone provide some feedback on how I might resolve this and perform the above tasks using RBAC management group for Exchange 2010? Appreciate any help. Thank you.

Hi,
According to your description, it seems like you failed to assign the permissions.
How did you assign the permissions to the group?
I recommend that you refer to the following article to assign the permissions:
How to give permissions to users to manage Universal Security Distribution
Lists (must use RBAC)
Assign permissions to security group (recommended)
New-managementroleassignment –role “Security group creation and membership” –securitygroup “DL Owners”
or to assign the roles directly to user
New-managementroleassignment –role “Security group creation and membership” –User “username”
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2010 upgrade to SP2 failed

I got errors when trying to upgrade Exchange Server 2010 to SP2. It failed on the hub transport role.  Any ideas on how to repair this? The server had a previous issue and I was trying to resolve it by installing SP2. Thank
you.
[01/02/2013 19:11:29.0066] [1] Executing:
          $vdirName = "PowerShell (Default Web Site)";
          $InternalPowerShellUrl="http://" + $RoleFqdnOrName + "/powershell";
          $vdir = get-PowerShellVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where { $_.Name -eq $vdirName };
          if ($vdir -eq $null)
            $vdirName = "PowerShell";
            new-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -BasicAuthentication:$false -WindowsAuthentication:$false -RequireSSL:$false;
          else
            update-PowerShellVirtualDirectoryVersion -DomainController $RoleDomainController;
            Set-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -WindowsAuthentication:$false -RequireSSL:$false;
[01/02/2013 19:11:29.0066] [2] Active Directory session settings for 'Get-PowerShellVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred Domain
Controllers: '{ Exchange.BGCC.local }'
[01/02/2013 19:11:29.0066] [2] Beginning processing get-PowerShellVirtualDirectory -Server:'Exchange.BGCC.local' -DomainController:'Exchange.BGCC.local'
[01/02/2013 19:11:29.0082] [2] Searching objects "Exchange.BGCC.local" of type "Server" under the root "$null".
[01/02/2013 19:11:29.0082] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0082] [2] Searching objects of type "ADPowerShellVirtualDirectory" with filter "$null", scope "SubTree" under the root "EXCHANGE".
[01/02/2013 19:11:29.0129] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0129] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[01/02/2013 19:11:29.0191] [2] [WARNING] IIS://EXCHANGE.BGCC.local/W3SVC/1/ROOT/PowerShell wasn't found. Please make sure you've typed it correctly.
[01/02/2013 19:11:29.0207] [2] Ending processing get-PowerShellVirtualDirectory
[01/02/2013 19:11:29.0207] [2] Active Directory session settings for 'Update-PowerShellVirtualDirectoryVersion' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred
Domain Controllers: '{ Exchange.BGCC.local }'
[01/02/2013 19:11:29.0207] [2] Beginning processing update-PowerShellVirtualDirectoryVersion -DomainController:'Exchange.BGCC.local'
[01/02/2013 19:11:29.0207] [2] Searching objects "Exchange.BGCC.local" of type "Server" under the root "$null".
[01/02/2013 19:11:29.0222] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0222] [2] Ending processing update-PowerShellVirtualDirectoryVersion
[01/02/2013 19:11:29.0238] [2] Active Directory session settings for 'Set-PowerShellVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred Domain
Controllers: '{ Exchange.BGCC.local }'
[01/02/2013 19:11:29.0238] [2] Beginning processing Set-PowerShellVirtualDirectory -InternalUrl:'http://exchange.bgcc.local/powershell' -DomainController:'Exchange.BGCC.local' -WindowsAuthentication:'False' -RequireSSL:'False' -Identity:'Exchange.BGCC.local\PowerShell
(Default Web Site)'
[01/02/2013 19:11:29.0238] [2] Searching objects "Exchange.BGCC.local\PowerShell (Default Web Site)" of type "ADPowerShellVirtualDirectory" under the root "$null".
[01/02/2013 19:11:29.0269] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0285] [2] Processing object "EXCHANGE\PowerShell (Default Web Site)".
[01/02/2013 19:11:29.0316] [2] The properties changed on the object 'PowerShell (Default Web Site)' (CN=PowerShell (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=BGCC,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=BGCC,DC=local) are: "{ InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ } }".
[01/02/2013 19:11:29.0316] [2] Saving object "EXCHANGE\PowerShell (Default Web Site)" of type "ADPowerShellVirtualDirectory" and state "Changed".
[01/02/2013 19:11:29.0316] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0316] [2] Authentication settings are being applied on the IIS virtual directory "IIS://EXCHANGE.BGCC.local/W3SVC/1/ROOT/PowerShell".
[01/02/2013 19:11:29.0378] [2] [ERROR] Unexpected Error
[01/02/2013 19:11:29.0378] [2] [ERROR] A failure occurred while trying to update metabase properties.
[01/02/2013 19:11:29.0394] [2] [ERROR] The system cannot find the path specified.
[01/02/2013 19:11:29.0394] [2] Ending processing Set-PowerShellVirtualDirectory
[01/02/2013 19:11:29.0394] [1] The following 1 error(s) occurred during task execution:
[01/02/2013 19:11:29.0394] [1] 0. ErrorRecord: A failure occurred while trying to update metabase properties.
[01/02/2013 19:11:29.0394] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Common.LocalizedException: A failure occurred while trying to update metabase properties. ---> System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the
path specified.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Exchange.Management.Metabase.IisUtility.SetAuthenticationMethod(DirectoryEntry virtualDirectory, AuthenticationMethodFlags method, Boolean value)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetIisVirtualDirectoryAuthenticationMethods(ADExchangeServiceVirtualDirectory virtualDirectory, String metabasePath)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetSplitVirtualDirectoryAuthenticationMethods(ADExchangeServiceVirtualDirectory virtualDirectory, String nego2Path, TaskErrorLoggingDelegate errorHandler, LocalizedString
errorMessage)
   --- End of inner exception stack trace ---
[01/02/2013 19:11:29.0394] [1] [ERROR] The following error was generated when "$error.Clear();
          $vdirName = "PowerShell (Default Web Site)";
          $InternalPowerShellUrl="http://" + $RoleFqdnOrName + "/powershell";
          $vdir = get-PowerShellVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where { $_.Name -eq $vdirName };
          if ($vdir -eq $null)
            $vdirName = "PowerShell";
            new-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -BasicAuthentication:$false -WindowsAuthentication:$false -RequireSSL:$false;
          else
            update-PowerShellVirtualDirectoryVersion -DomainController $RoleDomainController;
            Set-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -WindowsAuthentication:$false -RequireSSL:$false;
        " was run: "A failure occurred while trying to update metabase properties.".
[01/02/2013 19:11:29.0394] [1] [ERROR] A failure occurred while trying to update metabase properties.
[01/02/2013 19:11:29.0394] [1] [ERROR] The system cannot find the path specified.
[01/02/2013 19:11:29.0394] [1] [ERROR-REFERENCE] Id=PowerShellComponent___0933481a46d24e77abfdf174e8240b80 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/02/2013 19:11:29.0394] [1] Setup is stopping now because of one or more critical errors.
[01/02/2013 19:11:29.0394] [1] Finished executing component tasks.
[01/02/2013 19:11:29.0441] [1] Ending processing Install-BridgeheadRole

Hi
I found a thread that with the same error message
http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/2e0bebab-cbc5-4f14-a7b4-62cca7da8e82
As it described, there is a firewall between the emc and exchange server and this was cutting the connection.
Hope that will help
Cheers
Zi Feng
TechNet Community Support

Exchange 2010 OAB issue on clients

Hey guys,
Need some assistance fixing a OAB issue.
All workstations are getting an error when trying to download OAB through outlook 2010 "Server reported error (0x80190194): The operation failed". Also please note I unchecked the box "download changes since last send/receive" or just left
it checked for new setups.
I checked Exchange both MBX and both CAS servers and no error messages in logs appear.
Have done some research on the issue and found some posts telling me to manually update the OAB through EMC under the mailbox section. Have done that but still nothing.
Also checked permissions on both MBX servers under path: C:\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB. Now from what I read, these need to be replicated to the CAS server under C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB. I
checked permissions for this folder too and they are OK.
How can I rectify this? Its happening on all workstations within network, cached mode and also using RPC over HTTP.
Also within the network, they use a proxy but when at home using RPC over HTTP, it does not use proxy and I still get same error message and its a new outlook profile setup.
I'm running SP3. Thanks guys,

follow this Exchange Team article.
http://blogs.technet.com/b/exchange/archive/2012/04/27/how-large-is-my-exchange-offline-address-book-oab.aspx
Where Technology Meets Talent
Hi ExchangeITPro,
So the size of my -data-<sequence>.lzx file is 1.89 MB. I found this by running the exchange command to find out the mailbox server generating the OAB files and then going to the path C:\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB\<GUID>
and then finding the -data-<sequence>.lzx file.
Now how do I delete and re-create the OAB?

CSS 11501 Exchange 2010 ActiveSync issue

When performing an ActiveSync test from Microsoft's Connectivity test tool (https://www.testexchangeconnectivity.com/) all the steps for the ActiveSync test pass except the last one which fails with this error:
Attempting FolderSync command on ActiveSync session
FolderSync command test failed
Additional Details
Exception Details:
Message: The request was aborted: The request was canceled.
Type: System.Net.WebException
Stack Trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Tools.ExRca.Tests.ActiveSync.ActiveSyncFolderSyncTest.PerformTestReally()
When we test directly to the node, bypassing the contenet services switch, the test finshes properly, and ActiveSync works on mobile devices.
Any ideas?

Hi,
We can create allow lists, block lists, and quarantine lists specifying which mobile devices are allowed to access Exchange mailboxes. A mobile device that's blocked because of a device access setting won't be allowed to connect to the Exchange
server and will receive HTTP 403 Forbidden errors. For more information about how to manage mobile device, please refer to the following article.
http://technet.microsoft.com/en-us/library/ff959225(v=exchg.141).aspx
Best Regards.

Exchange 2010\Outlook Mail issues

Hi,
I am having some issues with mail disappearing and outlook not updating. The issues are:
When sending an email from Outlook it appears in the sent items for 30 seconds in Outlook and then disappears. It never shows up in OWA The email does send though. If an email is sent via OWA the email appears and stays in both OWA and Outlook. This is
happening in Outlook 2010\Exchange 2010
Updating issues on random folders in Outlook. This is happening on both Outlook 2013 and Outlook 2010 different users with the same Exchange 2010 back end.
Both users have cached email forced. I have tried rebuilding the mailbox locally.
Cheers,
Zac Avramides

Hi,
Thanks for your detailed information about the symptom.
It seems the issue is more related to the Outlook client since OWA works fine. I suggest we can follow the checkpoints below:
1. Rebuild Outlook profile.
2. Disable any third-party firewall or AV programs.
3. Run Windows in Clean Boot.
4. Run Outlook in safe mode by “Outlook /safe”.
What’s the result now?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

Upgrading from Exchange 2003 Bridgehead servers to Exchange 2010 Transport Hub servers for routing SMTP only

Our company moved from on-premises Exchange 2003 to Office365 and only have 4 Exchange 2003 servers on-prem that we use for Routing email from application servers to Office365. We need to migrate these servers to Exchange 2010 then to Exchange 2013 and
only route email only. Is it possible to upgrade to Exchange 2010 by installing the transport Hub & Mailbox server options only? Our OAB and EWS services come from the CAS servers located on Office365 so we should not need a CAS server to set up Transport
rules or route mail would we? Any assistance with this would be greatly appreciated! - Thanks, DWB
Dave

Since it is not internet facing we will not have to worry about configuring an Internet Domain Name when installing the first server, correct? in my planning I was going to
install the Exchange 2010 CAS/Mailbox/Transport Hub roles on one server, then upgrade it to Exchange 2013. Once this is completed I'll then install the 2 mailbox role servers in one Datacenter, and 3 more in our DRP DC. If something happens to the
primary Datacenter I would want it to fail over to the other site. For this I would have to install another CAS/mailbox server in the secondary DC. Would this plan sound about right? Since we moved to Office365 in 2010 I have not had a chance to deal with
actual servers except for the Exchange 2003 servers we still have on-premises. Each of these are located in 4 Regional offices along with single Windows 2008 R2 servers using only the IIS SMTP service for routing mail from on-prem application servers
and print/scanners which email back to the users. The plan is to move to a routing system which will provide both MTA and redundancy if one has an issue.
Dave

Upgrade Exchange 2010 SP2 to SP3 getting fail

Hi,
I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
Preparing Exchange Setup
    Copying Setup Files                           COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites                                 COMPLETED
    Organization Checks
FAILED
     Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
    Language Pack Checks
COMPLETED
    Hub Transport Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
    Client Access Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Thanks,
San

Hi,
Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
on domain controller holding schema master role.
Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 upgrade issue

Similar Messages

Maybe you are looking for