Exchange 2010 user online archive mailbox becomes personal archive mailbox after recreated

Hi,
We are using Exchange 2010 SP2, one of our user online archive mailbox deleted and re-created fresh archive mailbox.
But, then it displaying as Personal Archive Mailbox instead Online Archive Mailbox in server and user outlook. Also, no emails moving from primary mailbox to personal archive mailbox. Checked and confirm mailbox retention policy for the user mailbox, however
there is no archive is running.
How to resolve changing to Online Archive Mailbox and continue mailbox archive?
Any help.
MD

Hi,
How did the user delete and re-create the online archive mailbox?
I suggest re-create online archive mailbox via following method:
1. Befor creating Online Archive, please perform following configuration:
Configure Exchange Online Archiving
http://technet.microsoft.com/en-us/library/hh529915(v=exchg.141).aspx
2. Then create Online Archive:
Create a Personal (On-Premises) or Cloud-Based Archive for a New Mailbox
http://technet.microsoft.com/en-us/library/dd979791(v=exchg.141).aspx
Thanks

Similar Messages

Exchange 2010 SP3 Update Rollup 2 (KB2866475) personal archive issue

I’m wondering if anyone else has run across this issue: We use the Exchange personal online archives, and after installing the rollup, anyone with full access to someone else’s mailbox had all the personal archive names changed to the
same name. As an example, if I had full access to Joe’s mailbox, then the name of Joe’s personal archive, as shown on my Outlook 2010, would display “Archive – Paul@company” rather than “Personal Archive – Joe”. Uninstalling the rollup put
everything back to normal. So, has anyone else seen this?
Thanks.

Hi,
Have you checked it via OWA? Is it the same with Outlook 2010?
If the issue doesn’t occur when you use OWA, I recommend you recreate Outlook profile to check the result.
If OWA also has the issue, please make sure whether all users are impacted by the issue.
Here is a related thread below for your reference, but I cannot find related description for the issue that the Update Rollup 2 for Exchange Server 2010 SP3 resolves.
http://social.msdn.microsoft.com/Forums/exchange/en-US/45814f93-30a7-4cad-ae4d-5c9d1f4d0a08/bug-in-update-rollup-1-for-exchange-server-2010-sp3-breaks-online-archive-names
Description of Update Rollup 2 for Exchange Server 2010 SP3
Best regards,
Belinda

Exchange 2010 users cannot open Exchange 2013 shared mailbox

Title says it all.
We're in the process of migrating 1000+ mailboxes to Exchange 2013. A number of shared mailboxes have been migrated, but those users still on 2010 cannot open them.
Is this just how it is, or is there a way around it?

Hi,
I tested in my lab, if the shared mailbox is on Exchange 2010, I could open this shared mailbox successfully. Then I moved this shared mailbox to Exchange 2013, after that, I couldn’t open it anymore, I got the following error:
Besides, I tried to open a shared mailbox on Exchange 2013 which was not moved from Exchange 2010, it is the same error message.
Based on the test, it seems that Exchange 2010 users can’t open shared mailbox on Exchange 2013. So I recommend you move those users to Exchange 2013.
Best regards,
Belinda Ma
TechNet Community Support

Exchange 2003 users are unable to send attachments larger then 8 MB to Exchange 2010 users on the same LAN

I am migrating from Exchange 2003 to Exchange 2010.
Users who are still on Exchange 2003 cannot send attachments any larger than around 8MB to Exchange 2010 users on the same LAN.
Users on Exchange 2010 can send large attachments to fellow Exchange 2010 users without issue.
I do not have any quota restrictions on Exchange 2010.
Had a look at the Exchange 2003 Connector but could not see any reference to attachement restrictions.
Has anyone come across this?

Here is a note of the NDR:-
Your message did not reach some or all of the intended recipients.
Subject:
The following recipient(s) cannot be reached:
Tracey xxxxxx on 01/12/2014 13:27
This message is larger than the current system limit or the recipient's mailbox is full.
Create a shorter message body or remove attachments and try sending it again.
<mail.xxxxxxxxx.com #5.2.3 smtp;450 5.2.3 Msg Size greater than allowed by Remote Host>

Outlook anywhere issue for exchange 2010 users

Hi Guys really hoping some one can help me out here.
I have just introduced 2 new exchange 2013 servers into our existing exchange 2010 environment. 1 CAS server and 1 mailbox server.
The issue i'm having is that any users that are on exchange 2010 mailbox servers can't connect to their profiles in outlook via the exchange 2013 cas box. OWA works fine and users that are on exchange 2013 mailboxes also work fine.
Authentication is set to on exchange 2013 and 2010 cas boxes to
Exchange 2013 cas
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
Exchange 2010 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
I was also wondering should I have a reg key on my exchange cas box of HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy\validports_autoconfigure_exchange ???

Thanks for the reply i have changed it to the following
Exchange 2013 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
Exchange 2010 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
and reset iis but still no luck authenticating with outlook on existing profiles or a new profile.

Exchange OWA does not load OWA for Exchange 2010 users

I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forbidden
403- Access is denied". However exchange 2010 users can login to their /ecp directory from exchange 2013. Exchange 2010 users can use OWA using their exchange2010/owa URL without any problems. We do not have any http or https redirection enabled
on any of the server. Also I have tried to uncheck the "Required SSL" settings for default web site on both Exchange servers but error is still same. Any help will be highly appreciated.

Hi,
According to your description, your Exchange 2013 cannot proxy OWA request to Exchange 2010 server, but ECP　request　can work properly.
In this case, Ｉ'd like to confirm OWA and ECP settings on Exchange 2013 and 2010 servers before going further:
Get-OWAvituraldirectory |fl identify,*url,*authentication
Get-ECPvituraldirectory |fl identify,*url,*authentication
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010's "Online Archive" doesn't appear in Outlook 2010

Hi,
I recently installed Exchange 2010, and all is working fine but the online archive feature.
I activated it for 2 of my users, it appears correctly in OWA, but doesn't appear in Outlook 2010 (Tech Preview).
What I am missing ? The only howtos I found state that you only have to setup Outlook, and the main mailbox + the online archive will appear... But I just have the main mailbox.
If you've an idea... :)

I did some testing on this whole Personal Archive thing as even when using a new version and new license key the archive wasn’t showing in Outlook 2010 (yet was showing in OWA).
So I setup two machines (VMs) running Windows 7 Ultimate.
One was x64 and the other x86 but vanilla installs.
Installed Office 2010 Professional Plus download from TechNet (the iso image with both x86 and x64 versions on it).
Installed the lastest Office updates published via MS Update.
Used the same license key for both installs of Office.
Exchange 2010 backend running SP1.
When the machines are not in a domain the archive doesn’t show in Outlook (both x86 and x64).
Pop the machines into the same AD domain as the Exchange server and hey presto the archive shows on both Outlook versions (x86 and x64).
Just to check things I removed them from the domain - archive folder missing again.
Re-added back to domain - archive folder shows.
It seems for the TechNet version anyhow the machine should be in a domain.
I can’t comment on other versions/license keys.
Regards

Online Archive renamed to Personal Archive on new users

It appears that after installing Exchange 2010 SP3, our archives have been renamed from "Online Archive - User Full Name" to "Personal Archive - User Full Name". I would like to have this consistent across the board, so I have two
questions:
1. Can I set the default to "Online Archive - Full User Name" so that when I set up a new user, it is named as stated?
2. Can I rename the existing mailboxes to "Online Archive - Full User Name" for those users added after implementing SP3?
Thanks,
Tom

You can write a script that renames your online archive, and run it regularly so that as new users are added, their archive is renamed. Run this every week and have the script key on when the mailbox was created for what mailboxes it applies the change
on. At the company I work for, we have a script that creates the mailbox, and it renames the archive at time of creation.
And, of course, you can also make a script that runs through your current mailboxes and renames the archive mailbox. It'll look something like this:
Get-Mailbox -ResultSize Unlimited | ? { $_.ArchiveName -like "Personal Archive - *" } | Sort Name | % { Set-Mailbox $_.Alias -ArchiveName $_.ArchiveName.Replace("Personal Archive - ","Online Archive - ") }

Created mailbox for new user in Exchange 2010, user not visible in AD.

Hi everyone!
This morning I created a mailbox for a new user on my Exchange 2010 box.
Everything works fantastically but I am unable to view the new user in AD except by searching. If I run a search the results say the user exists in my Users container, and I can view the properties of the user account from the search results, but I
am unable to actually see the user profile object in the Users container.
I notice in EMC that the mailbox has a user icon on the mailbox icon instead of the regular standard icon - I'm not sure what this implies.
Can anyone offer some advice as to why this happens and how to resolve it?
Thanks!

Hi,
AD objects store in the Domain partition Database.
Its replication Scope is :Domain Wide
Its replication model is: Multi Master
There are two possible cause.
1. AD replication latency if you have several DCs.
You could wait for AD replication or force replication, Click
refresh on ADUC.
2. You create the new user
in other OU, not Users.
You could run this command to get
the user’s DistingushedName attribution.
Get-mailbox –identity
[email protected] |fl
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Outlook 2013/ Exchange 2010 User Mailbox reached Limit and OWA is not reachable

Hello Folks,I have a strange Outlook/ Exchange problem with one of our Users, interestingly it’s the Boss of our company….The Background:- We have 2 Domains @company-1 or @company-2- We have 1 Exchange 2010 Server Version 14.03.0224.002- Till March of this year our Emails where hosted externally, we used to download the Emails every 2 minutes from POP3 Mailboxes into Exchange- We have 18 Users- So every User had a User account on our Exchange and a Mailbox externally- Now we host our Emails our self via MX and DNS Records(mail.company.cc)- The User kept their Exchange accounts, OWA is now working too So far all works well on my little Server farm.The Catch:Usually our users have only one Email address either @company-1 or @company-2 Except our Boss and one other User, they have an Email address in both Domains They have addresses one...
This topic first appeared in the Spiceworks Community

Hi,
I suggest to repair .ost file to check this issue by the following steps:
Exit Outlook.
In Control Panel, click or double-click Mail.
In the Mail Setup dialog box, click E-mail Accounts.
Click the Data Files tab, select the Exchange account, and then click
Open File Location. A file explorer window opens to the location of the data file for the Exchange account. The
Account Settings and Mail Setup dialog boxes will remain open, behind the file explorer window.
Close the Account Settings and the Mail Setup dialog boxes, then return to the file explorer window.
Important: be sure to close these two dialog boxes before you delete the file. If they aren't closed, Windows may display an error message about a conflict.
In the file explorer window, right-click the Exchange data file and then click
Delete. The next time you start Outlook, a new .ost file is created for the account.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Removing Exchange 2007 from SBS 2008 (In an Exchange 2010 Coexistance Scenario) - In order to remove 2007 Mailbox Objects from Active Directory and remove the SBS2008 server completely

I'm trying to remove Exchange 2007 from an SBS 2008 server
(Server 2008 Standard FE). My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers. We have two full blown DC's in the environment.
I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server. I can NOT seem to find a TechNet article that shows me how
to proceed in this kind of scenario. I am trying to use the TechNet article:
http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard.
When I go to Disable Mailboxes I get the following error:
Microsoft Exchange Error
Action 'Disable' could not be performed on object 'Username (edited)'.
Username (edited)
Failed
Error:
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
OK
I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010. I just want
to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
Can someone point me in the right direction?
Thanks!

Hi,
Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please refer to following articles and check if can help you.
Transition
from Small Business Server to Standard Windows Server
Removing SBS 2008 –
Step 1: Exchange 2007
Removing SBS 2008 – Step 2:
ADCS
Removing
SBS 2008 – Step 3: remove from domain / DCPROMO
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Hope this helps.
Best regards,
Justin Gu

No Free/Busy Information for Exchange 2010 users in Outlook 2010 client, 2010 OWA shows this information fine

I have looked for hours and hours on Google and this web site for this type of issue and nothing seems to help.
Problem:
On my new Windows 2008 R2 /Exchange 2010 server with IIS7 installed, I can use Outlook 2010 client to login and send and receive e-mail but when I try to busy search internal Exchange users I get no information (cross-hatch), but the sender of the Meeting Request
can see their own free/busy information fine. And OWA users can see free/busy information fine, as can Outlook 2003 client users against this Exchange 2010 server when logged in.
I don't know if I have a certificate problem with regard to IIS7 or Exchange 2010, I did not create my own certificate , it is just what was installed by default when I installed and configured Win2K8 server, IIS7 and Exchange.
On the Windows 7 workstations with Outlook 2010 client, I am not logging into the Exchange 2010 server DNS domain, if that makes any difference. On these workstations I can ping "autodiscover.my.exchange.server.com" and my.exchange.server.com
with no problem. I even used this Microsoft KB to install a new _autodiscover dns entry, but it did not help :
When I turn on logging on my Outlook 2010 client, I see this in my C:\Users\Administrator\AppData\Local\Temp\1\outlook logging\20131208-135658864-fb.log :
2013/12/08 13:56:58.864: Getting ASURL
2013/12/08 13:56:58.864: URL returned from cached autodiscover: blah blah
2013/12/08 13:56:58.864: Request to URL:
2013/12/08 13:56:58.864: Request action:
2013/12/08 13:56:58.864: Request XML: <?xml version="1.0"?>
2013/12/08 13:56:59.051: Request sent
2013/12/08 13:56:59.051: Response error code: 00000000
2013/12/08 13:56:59.051: HTTP status code: 0
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: There is an error in request/response.
2013/12/08 13:56:59.051: XML response:
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: Getting ASURL
2013/12/08 13:56:59.644: Failed to get ASURL. Error 8004010F
At an Exchange shell console I enter this command and get these results :
Exchnage Management Shell :
VERBOSE: Connecting to BPExchange2010.my.exchange.server.com
VERBOSE: Connected to BPExchange2010.my.exchange.server.com.
[PS] C:\Windows\system32>Test-OutlookWebServices -id:[email protected] -TargetAddress:[email protected]
ll.com
RunspaceId : c929eacd-d53c-49d7-8532-c4b74e61b8be
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is
Type : Success
Message : [Server] Successfully contacted the UM service at https://bpexchange2010.my.exchange.server.com/ews/exchan
ge.asmx. The elapsed time was 234 milliseconds.
[PS] C:\Windows\system32>
** Also frequently when I log into Outlook 2010 client and start to send a meeting request , I get the Security Alert dialog :
autodiscover.my.exchange.server.com
Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
Green Check Mark : The security cerficate is from a trusted certifying authority
Green Check Mark: The security certificate date is valid
Red X : The name on the security certificate is invalid or does not match the name of the site.
Do you want to proceed ? . I either import the certificate or click YES, but does not help this issue.
NOTE: Each user that shows as NO INFORMATION cross-hatch, these users have appointments and have logged into outlook before.
When I do this autodiscover url from a Windows 7 pc with outlook 2010 I get :
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="14:47:01.5656198" Id="401440650">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Can anyone assist ? What am I missing ?
Thank You
NOTE: When will this go away. I had to strip out a lot of helpful information to post this. "Body text cannot contain images or links until we are able to verify your account."

Hi,
How many users encounter this issue, all users with Outlook 2010 or some specific users?
According to your post, the Error code 600 indicates that your Autodiscover service is working well. as for the certificate mismatch issue, we can also following the KB below to resolve it:
http://support.microsoft.com/kb/940726/en-us
The Free/Busy information in Exchange 2010 is using the Availability service to
retrieve it. Please directly access
https://mail.mydomain.ae/EWS/Exchange.asmx in IE and see whether a proper XML file is returned.
Or we can go to
https://testexchangeconnectivity.com and check MS Exchange Web Services Connectivity Tests.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010 user Non-deliverable message

Any help is appreciated. We have a user who is trying to email a vendor who she normally can but now she is getting an NDR message stating:
The following organization rejected your message: [XXX]. <- other company's IP
Diagnostic information for administrators:
Generating server:
esa1.XXX.iphmx.com <- our server
Recipient's email address
[XXX] <- other company's IP #<[XXX] <- other company's IP #5.0.0 smtp;
5.3.0 - Other mail system problem 550-'permanent failure for one or more
recipients (recipients email address:blocked)' (delivery attempts: 0)>
#SMTP#
Original message headers:
X-IronPort-AV:
E=Sophos;i="4.84,830,1355126400";
d="xml'?bin'?scan'208,217,72,48?xlsx'208,217,72,48,72,48?rels'208,217,72,48,72,48";a="8561738"
Received:
from firewall01.XXX.com (HELO <- our company's system
webmail.XXX.com) <- our company's system
([IP]) by esa1.XXX.iphmx.com <- our company's system
with ESMTP; 12 Mar 2013
04:30:48 -0800
Received: from
TMIEXMB02.XXX.com ([IP]) <- our company's system
by
TMIEXCAS02.XXX.com ([IP]) with mapi id <- our company's system
14.02.0247.003;

Any help is appreciated. We have a user who is trying to email a vendor who she normally can but now she is getting an NDR message stating:
The following organization rejected your message: [XXX]. <- other company's IP
Diagnostic information for administrators:
Generating server:
esa1.XXX.iphmx.com <- our server
Recipient's email address
[XXX] <- other company's IP #<[XXX] <- other company's IP #5.0.0 smtp;
5.3.0 - Other mail system problem 550-'permanent failure for one or more
recipients (recipients email address:blocked)' (delivery attempts: 0)>
#SMTP#
This NDR is stating that the recipient company has blocked this email address so you will have to contact them to see if they can lift the block or why it was blocked in the first place.
Jason Apt, Microsoft Certified Master | Exchange 2010
My Blog

Exchange 2010, users in C:\Users?

Hello,
We appear to have a problem on our Exchange 2010 servers. We have a lot of user profiles on it for some reason. These people cannot log on to the servers so I don't understand why they have them? Not all users have profiles, probably around 5-10%.
Any advise will be appreciated.
Regards
Ian Southwell

Dear Frank,
Even I am struggling through the same issue whereas there is no one in logon on locally access and we have deny logon locally to all user including authenticated users.
Users profile are creating on only one server whereas on another CAS there is no profile even though CAS1 and CAS2.
Kindly suggest.
Sadanand Bobade
Sadanand Bobade

Exchange 2010 users cant change password in OWA when Cas server is Exchange 2013 cu3

Running Exchange 2010 and 2013 in mixed mode. users who is still on Exchange 2010 cant change password in OWA. It worked when it was clean Exchange 2010 installation. Password change is working for users migrated to 2013
LS

Hi
Please follow the below blog which will help you in solving this issue
http://technet.microsoft.com/en-us/library/bb684904.aspx
Note: Be careful while modifying the registry settings.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Exchange 2010 user online archive mailbox becomes personal archive mailbox after recreated

Similar Messages

Maybe you are looking for