Exchange 2010

Has anyone got Coldfusion 9 to connect with Exchange 2010? I keep getting Unable to connect to the Exchange server using HTTP/HTTPS protocol. I have tried it with Forms and without. Just about every possible combination. I would appreciate any help.

we have a new exchange(2010) in a different domain, which has been working well for the past 6 months, since Monday our new exchange keeps on losing contact with the domain ,and this kicks it out of the network.
Hi,
Could you please provide more information about your issue for further troubleshooting, such as Event logs in en=vent viewer, any error description?
Please make sure all Exchange services are started and running in Exchange 2010. Also confirm if there are any
event ID 2084 and event ID 1216, event 2070 logged in server. Here is
a related KB:
https://support.microsoft.com/en-us/kb/2952799?wa=wsignin1.0
We can upgrade Exchange 2010 to the latest version to have a try.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Similar Messages

Exchange 2013 - can no longer move mailboxes from Exchange 2010 to Ex 2013.

Migrating to Exchange 2013 from Exchange 2010. Created Ex 2013, moved some mailboxes OK. Then could no longer move mailboxes. No errors. The Migration email says complete. Synced: none, Total Mailboxes: none.
Tried several mailboxes. Same result.
Ex 2010 is SP3 RU6, (at least it says RU6 is installed in Programs/Features. The build is for SP3 w/o RU6???)
Ex 2013 is SP1 aka CU4.
How to proceed???
john11

After many attempts to fix the issue (move remaining 4 mailboxes from Exchange 2010 to Exchange 2013) I contacted Microsoft and we resolved the issue. Here's how.
btw - Thanks for the suggestions from Ed. However, they did not seem to move us forward.
What did work:
1. On the Exchange 2010 box, create a new database. (Someone else suggested this also). Then move the remaining Exchange 2010 mailboxes to this new db. Then after that, move the 4 mailboxes to Exchange 2013 using the GUI on Ex 2013. This only worked for one
of the four mailboxes. The other 3 failed.
2. Apparently, we need to restart the Microsoft Exchange Mailbox Replication service on the Exchange 2013 after several failed move attempts to clear cache related to the moves.
3. Then on the Exchange 2013 box, use this Exchange shell command:
New-MoveRequest -identity "[email protected]" -TargetDatabase "Exchange 2013 DB name" -BadItemLimit '500' -verbose
This moved the remaining 3 mailboxes including the Discovery mailbox. It took some time. But we could check the progress using
Get-MoveRequest
The MS Tech was terrific. Really knew his stuff. And all mailboxes are on Exchange 2013. Well, the last one is still moving, but I am optimistic.
Thanks for the suggestions. I had to get this done and the MS Tech made that happen.
john11

Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs    IOS 3.1.3
iPhone 3Gs    IOS 4.3.3
iPhone 4       IOS 4.3.3
iPhone 4       IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?

Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry

Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
    get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
    "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
    Get-EventLog : No matches found
    At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
    + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
    -eq $msftesqlCrashEventId}
        + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
        + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
    Name IsDeadLocked CatalogStatusArray
    SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
    Server Database ServerGuid ResultFound SearchTimeInSeconds Error
    SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

Exchange 2010 can't send or receive email with attachments.

Hello,
We have an Exchange 2010 server, running under Windows 2008R2. Both the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs.
The problem is that attachments over about 1 MB do not send or receive and no error message is returned. If I send an email message with a 3 MB attachment to myself, it reports as sent in Outlook. On the Exchange server the message queue shows nothing in
the queue. I try to use Exchange mail flow tracking tool and it hangs when selecting “messages received from” option. I gave up waiting after 5 minutes for the display to populate.
As the server is set attachments should be able to send and receive up to 20 MB.
I checked and verified all settings I could find related to this. I checked with the Exchange Management Console per the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
I also checked using the Exchange Power Shell using the following article:
http://eightwone.com/2010/09/29/exchange-message-size-limits/
Both show that all settings are suitable. Details are below
I would appreciate feedback on this problem.
Thank you!
Details from the articles noted above:
First test was to attach a 3 mb text file in Outlook sent from my in house account to my in house account. After 5 minutes the test message was not received nor was there an error message returned.
Checked The Exchange server mail queue and there was nothing in the queue. Checked the Exchange mail flow tracking tool and it hung when selecting “messages received from” option.
Reviewed and verified settings per the following 2 articles:
Article #1
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
Organization Configuration>Hub Transport>General Settings>Global Settings>Transport Settings set to max receive size (KB) = 20480
Settings set to max send size (KB) = 20480
Organization Configuration> Hub Transport> Send Connectors tab.
Maximum message size (KB) set to 20480
Exchange Management Console> Server Configuration> Hub Transport> and then on the right side, select the desired server.
A list of all Receive Connectors will be shown below
There are 3 receive Connectors
#1) named Client XXXXXXXXXX
Maximum message size (KB) set to 20480
#2) named Default XXXXXXXXXX
Maximum message size (KB) set to 20480
#3) named relay
Maximum message size (KB) set to 20480
Use Exchange Management Shell to check settings
#1) Get-ADSite
Returns:
Name                           HubSiteEnabled
Default-First-Site-Name        False
#2) Get-ADSiteLink
Name                      ADCost     ExchangeCost    Sites
DEFAULTIPSITELINK         100                        {xxxx.local/Configuration/Si...
#3) Get-ADSiteLink | select Max*
MaxMessageSize
unlimited
Exchange Management Console>Expand Organization Configuration>Click on Hub Transport item>Click on Transport Rules tab
No rules
Article #2
http://eightwone.com/2010/09/29/exchange-message-size-limits/
COMMAND: Get –TransportConfig
results:
ClearCategories                     : True
ConvertDisclaimerWrapperToEml       : False
DSNConversionMode                   : UseExchangeDSNs
ExternalDelayDsnEnabled             : True
ExternalDsnDefaultLanguage          :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority       :
ExternalDsnSendHtml                 : True
ExternalPostmasterAddress           :
GenerateCopyOfDSNFor                : {}
HygieneSuite                        : Standard
InternalDelayDsnEnabled             : True
InternalDsnDefaultLanguage          :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority       :
InternalDsnSendHtml                 : True
InternalSMTPServers                 : {}
JournalingReportNdrTo               : <>
LegacyJournalingMigrationEnabled    : False
MaxDumpsterSizePerDatabase          : 18 MB (18,874,368 bytes)
MaxDumpsterTime                     : 7.00:00:00
MaxReceiveSize                      : 20 MB (20,971,520 bytes)
MaxRecipientEnvelopeLimit           : 500
MaxSendSize                         : 20 MB (20,971,520 bytes)
MigrationEnabled                    : False
OpenDomainRoutingEnabled            : False
Rfc2231EncodingEnabled              : False
ShadowHeartbeatRetryCount           : 12
ShadowHeartbeatTimeoutInterval      : 00:15:00
ShadowMessageAutoDiscardInterval    : 2.00:00:00
ShadowRedundancyEnabled             : True
SupervisionTags                     : {Reject, Allow}
TLSReceiveDomainSecureList          : {}
TLSSendDomainSecureList             : {}
VerifySecureSubmitEnabled           : False
VoicemailJournalingEnabled          : True
HeaderPromotionModeSetting          : NoCreate
Xexch50Enabled                      : True
COMMAND:
Set-TransportConfig –MaxReceiveSize 20MB –MaxSendSize 20MB
C:\Windows\system32>Set-TransportConfig -MaxReceiveSize 20MB -MaxSendSize 20MB
WARNING: The command completed successfully but no settings of 'Transport Settings' have been modified.
COMMAND:
Get-SendConnector
Identity                                AddressSpaces
Enabled
Internet                                {SMTP:*;1}
True
COMMAND:
Set-SendConnector -Identity Internet -MaxMessageSize 20MB
WARNING: The command completed successfully but no settings of 'Internet' have been modified.
COMMAND:
Get-ReceiveConnector
Identity                                Bindings                                Enabled
XXXXXXXXXX\Default XXXXXXXXXX           {0.0.0.0:25}
True
XXXXXXXXXX \Client XXXXXXXXXX     {:::587, 0.0.0.0:587}                   True
XXXXXXXXXX \relay                        {0.0.0.0:25}
True
COMMAND:
Get-ReceiveConnector | fl Identity,MaxMessageSize
Identity       : XXXXXXXXXX \Default XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity       : XXXXXXXXXX \Client XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity       : XXXXXXXXXX \relay
MaxMessageSize : 20 MB (20,971,520 bytes)
COMMAND:
Get-AdSiteLink | fl Name,*max*
Name           : DEFAULTIPSITELINK
MaxMessageSize : unlimited
COMMAND:
Get-RoutingGroupConnector <ConnectorID> | FL Name, *Max*
No routing group connectors are installed
Individual
Recipient Configuration > Mailbox>Properties of the User> Activate tab Mail Flow Settings> Properties>Message Size Restrictions settings:
Set to 20480 for send and receive for all.
Re-tested and had the same problem.
Post on Technet.

ExchangeITPro,
Thank you for your reply.
>what SP are you at?
As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
>try restarting the transport services.
Done previously as well as the entire server. No change.

Exchange 2010 GAL Export script working from EMS but not as a scheduled task

I have been asked to get a script together to export the GAL on an Exchange 2010 server and then email it to a manager. I have been playing it with days, and have pruned it to the very minimum to at least try and get it working before improving it. At the
moment I have the text as below:
Del c:\GALexport.csv
Get-Recipient -ResultSize unlimited | where {$_.HiddenFromAddressListsEnabled -eq $false} | Select DisplayName,PrimarySMTPAddress,sAMAccountName,alias | Export-Csv "c:\GALexport.csv"
This works just fine in Exchange Management Shell and deletes the previous report before creating a new one. However, when I set it up as a scheulded task, it does nothing.
The task is set up as follows:
Action - Start a Program
Program/ Script C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe
Add arguments -version 2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
This is set to run under my administrator account with the highest privileges and I have the logon as batch right.
Unfortunately, when I run it as a scheduled task, nothing happens. The last run result is (0x0) and in the history it says 'task completed', but no report is produced. Can anyone advise please?

Does it delete the c:\GALexport.csv file? If not, then its not even executing the ps1 script...
- Open cmd prompt and run below command to confirm that there isn't any typo or any other small error...
C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -version
2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
- If above works then something wrong with task scheduler configuration...
Blog |
Get Your Exchange Powershell Tip of the Day from here

CMD=Ping&log query is taking long time-taken when checked in IIS logs.... Exchange 2010 SP3..

Query regarding the ActiveSync and parameter time-taken from ActiveSync IIS logs.
Here what I see for from the logs.
[email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200 0 0 1501129
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 22105
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 452
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 936
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 656238
In the above log, highlighted are the time-taken and I just want to check what is the ideal time-taken value, some value above should be causing some problem, like the one of the top 1501129 ?
?AND I see its for POST event and CMD=Ping&log query.......
We have Mobile Iron in the environment and we are seeing few timeout errors on MobileIron server and for users intermittently. They usually see below error... However we don't see any end users issues, but just want to get rid of below error. MobileIron guys
are pointing it to time-taken value which is high intermittently.
IOException connection to server [email protected] -- java.io.IOException:
awaitUninterruptibly was stopped by timeout
@BALA

Hi,
To understand more about the issue, I’d like to confirm the following information:
1. What’s your Exchange 2010 version?
http://support.microsoft.com/kb/2536517/en-us
2. Do you install other software, like SQL, on the same Exchange Server?
3. Change another admin account to access EMS.
Thanks,
Angela Shi
TechNet Community Support

Install Exchange 2010 Sp3 on Windows 2012 R2

Dear All,
From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
Thank you

The prerequisite check is checking that the required Windows components are installed. Exchange 2010 is still not supported on Windows Server 2012 R2.

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Unified Messaging Exchange 2010 with Jabber

Is anyone aware of a way to have Jabber integrate with Exchange 2010 for voice-mail?
I have CUCM trunked to the server, the calls are going to the server and you can leave a voice mail and phone MWI lights up.
I have the voice-mail icon on the jabber client and when I press it, it goes to the voice mail box.
The issue is that it says its not connected, and when people leave a voice-mail, Jabber does not indicate you have a message.
We are running CUCM 9.1, CUPS 9.1, Jabber4W 9.7
Any input would be greatly appreciated.
Thanks
Phil

Jabber for windows 9.7; only supports VMREST voicemail access. The only option for this is unity connection 8.5 and above. Connection to Exchange 2010 form of unified messaging (voicemail service through exchange server alone) is not supported.
Please refer to the following link;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_01.html#JABW_RF_SEF029A0_00
On-Premises Servers for Cisco Jabber for Windows and Cisco Jabber for Mac
Cisco Jabber supports the following on-premises servers:
Cisco Unified Communications Manager version 8.0(1) or later
Cisco Unified Presence version 8.0(3) or later
Cisco Unity Connection version 8.5 or later

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

Delete emails from a specific folder in Exchange 2010 SP1

Hi all,
Since Exchange 2010 SP1 does not have “-DeleteContent” parameter in mailboxexportrequest any more, how do we delete emails from a specific folder of a user mailbox? (Personal folder, not default folders).
Please note that the ASQ for searchquery in Search-Mailbox does not support “folder”.
If going for retention policy, is there a way to tag a retention policy to a specific folder of a user mailbox without user attention?
William Yang
William Yang

Hi William,
Yes, you may not run the Search-Mailbox to delete items in specific folder at the moment. Hope it will be back soon.
You can create a Personal tag, users can apply personal tags to folders they create. But users have to select related Retention Policy using Outlook or OWA manually.
For more information, please see:
Understanding Retention Tags and Retention Policies
http://technet.microsoft.com/en-us/library/dd297955.aspx
Frank Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

TS3276 i am having trouble with my exchange emails. I use the latest exchange 2010 and am having trouble downloading all my emails on the macbook

I use a microdost exchange 2010 in my office. I just bought a macbook pro and try to syn my office mail. While it has been set up properlly and it has started downloading some of my older emails, it is taking very long and does not download all the mails especially the new ones. The ones it has downloaded take a long time to load and open.
I bought the laptop to use it on the go. What is the solution? Please help.
Thanks.

Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
If the startup disk is not available from that window, you may be able to repair the disk.
Help here > A flashing question mark appears when you start your Mac

Exchange 2010 performance is very slow

Hi Team,
One of our Exchange 2010 server is running very slow,
My problem is when i remote desktop do my Exchange servers, everything is so slow.
Any idea's what could cause this?
Thanks,
Sivakumar Thayumanavan

Hi Jatin,
Please find the answer for your question.
1. Server is virtual or physical - Virtual
2. If virtual then RAM is static or dynamic - Static
3. Is the RDP only slow or when you log on locally also - RDP only slow as the server is virtual server
4. If only RDP and its a Virtual machine then by any chance you have a broadcom lan card..??
what task manager is showing.. can you share the screen shot.
Sivakumar Thayumanavan

DNS for exchange 2010

I have set up exchange 2010 for a home lab. My internal domain name is domain.local and my external domain name is domain.info. OWA works internally using
https://servername/owa. My question is how do I get OWA working with my external FQDN from outside my internal network? I have set up port forwarding for port 25 through my cable modem and routed mail through the Verizon
smart host. I can receive mail on my domain.info email address but cannot send mail externally to a Gmail address. I also set up an MX record in godaddy for my domain pointing to my public ip as well as an A record pointing to "mail.domain.info".
Any input would be helpful.
Thanks

Hi,
To understand more about the issue, I’d like to ask the following questions:
Can you send mails to Gmail with Outlook?
Can you send mails to other external domain?
Is there any NDR when the mails cannot be sent?
Additionally, let’s try the steps in the following article to troubleshoot the mail flow issue:
http://msexchangeguru.com/2013/07/29/troubleshooting-mail-flow-issues/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 task scheduled scripts not working if not logged on

Hi All,
I have done a script for Exchange 2010 and I would like to create a scheduled task for it.
I have followed the guidance of Mike Pfeiffer's blog.
http://www.mikepfeiffer.net/2010/02/creating-scheduled-tasks-for-exchange-2010-powershell-scripts/
However when I set the task as “Run whether user is logged on or not”, it only works if the user running the task is the administrator. The task is run with high privileges.
If I do it with a service account (local admin, exchange org admin) it works only when:
-You run the script for an interactive session of the user or a runas cmd
-You set the Task as “Run only when the user is logged on” (and the user is logged on)
If I run the Task as “Run whether user is logged on or not” and the user is not logged on, I get an error on the connection command "Connect-ExchangeServer -auto" (and the task hangs waiting for an answer). The transcript is as follows:
Transcript started, output file is C:\scripts\informes\pruebasconexion.Log.txt
         Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #31:
Tab completion reduces the number of keystrokes required to complete a cmdlet. Just press the TAB key to complete the cmdlet you are typing. Tab completion kicks in whenever there is a hyphen (-) in the input. For example:
Get-Send<tab>
should complete to Get-SendConnector. You can even use wildcards, such as:
Get-U*P*<tab>
Pressing the TAB key when you enter this command cycles through all cmdlets that match the expression, such as the Unified Messaging Mailbox policy cmdlets.
WARNING: The service () isn't running. Connecting to remote Powershell requires this service to be running.
VERBOSE: Connecting to CAS01.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas01.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
VERBOSE: Connecting to CAS02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas02.XX..Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
WARNING: The service () isn't running. Connecting to remote Powershell requires this service to be running.
VERBOSE: Connecting to MBX02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://mbx02.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
VERBOSE: Connecting to CAS01.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas01.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
VERBOSE: Connecting to CAS02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas02.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
WARNING: The service () isn't running. Connecting to remote Powershell requires this service to be running.
VERBOSE: Connecting to MBX02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://mbx02.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
The error message refers to a unkown "() service", but I have no clue of which service can be needed and it is working only when session is opened.
The command I run is
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -command ". 'c:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1';c:\scripts\informes\estado_db_dag.ps1"
UNICAN-SdeI

I experienced a similar symptom where the scheduled task was getting stuck in the "Running" state. I searched the web for others who have experienced this issue with scheduled tasks, and what I found is that there could be a few reasons why
this might happen.
I resolved my problem by adding -NonInteractive switch before the -command parameter.
Hope it helps...
In my case, -NonInteractive does indeed stop the task from getting stuck in a perpetual Running state (until it times out based on the settings in scheduled task), but I was able to deduce why by using Start-Transcript and Stop-Transcript.
Basically, the connection to Exchange is failing some reason and it sits at a prompt waiting for you to enter a FQDN for an Exchange server (same problem as the OP). Adding -NonInteractive to the scheduled task does indeed prevent the task from getting
stuck waiting for someone to enter a FQDN at a prompt that they cannot interact with, the script still does not execute correctly. Essentially, adding the "-NonInteractive" switch does not fix the underlying problem of the Exchange connection
failing.
As far as I am able to tell, this has something do with a WinRM problem. I'm having the same problem as the OP and am trying to troubleshoot it. In my case, deleting the user profile for the service account does not fix the problem.

Exchange 2010

Similar Messages

Maybe you are looking for