Exchange 2010SP1 Multi-Tenant Issue with Multiple Domains

I have an installation of Exchange 2010 SP1 with multi-tenant support enabled via the install time /hosting switch.
Everything works well for my smaller clients. I now have a bigger client that has about 300 users and 3 domains. The users are divided roughly equally amongst the domains - ie, 3 domains each with 100 users. I've added the first domain as normal:
$c = get-credential
New-organization -name "Pretend Company" -DomainName domain1.com -ProgramId HostingSample -OfferId 2 -location en-US -AdministratorPassword $c.password
After that I logged into the ECP control panel and created all the users. The migration went smoothly and has been working well for the last week. Now, it's time to add the next domain. Since the client wants all 300 users visible in the same GAL, I just
added a domain to the organization:
New-AcceptedDomain -Name domain2.com -DomainName domain2.com -Organization "Pretend Company"
This is where I run into problems. When I try to create the users for domain2.com via ECP, I am able to create the user successfully, and select domain2.com from the drop down. Once the user is created however, I am able to see that although their UPN
is [email protected], it created their email address as [email protected].
I tried creating the users manually via EMS:
$password = Read-Host "Enter password" -AsSecureString
New-MailUser -UserPrincipalName [email protected] -Password $password -Name "Test User" -Organization "Pretent Company" -PrimarySmtpAddress [email protected]
The user creates successfully and I can see the user created in the proper OU in AD. Unfortunately I can not see them in ECP nor can I see them if I do:
get-mailbox -Organization "Pretend Company"
This makes the management of the users very difficult to delegate, and I'm not sure that the users at domain2.com will even work.
This brings me to my questions:
(1) Is is possible create accounts that have different domain names in their default email addresses within the same Organization in /hosting mode?
(2) Is this something I need to do with an EmailAddressPolicy? I read the documentation but it didn't seem /hosting friendly.

Hi Earonk,
Please post your issue on below forum, you will get more help from there:
http://social.technet.microsoft.com/Forums/en-us/exchange2010hosters/threads
Regards!
Gavin

Similar Messages

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

SPEL in Extended VO - Issue with Multiple Rows

Hi,
I have extended a seeded VO by adding a new attribute *'Course_Flag'* with attribute type 'Boolean' and Query Column type 'VARCHAR2' and i wa successfully able to personalize and view the data of the new attribute *'Course_Flag'* in the page as ('true' / 'false') aacording to the query where clause.
Now after adding a new image with SPEL property as *${oa.LearnerCatalogCoursesVO.Course_Flag}* it will have an issue with multiple items.
I mean the SPEL will take the first row value 'true' / 'false' and will be corrected rendered according to the value of the first row and ignore other rows values.
Example: if the *'Course_Flag'* value of the first row is 'true' then all the images will be rendered and if the *'Course_Flag'* value of the first row is 'false' then all the images will be NOT rendered.
Please advise if I've missed any step.
Thanks in advance to all.
Regards....Ashraf

Dear Kali,
I have added a new function to the seeded VO SQL +('XXARMS_TRG_EVALUATION_PKG.XX_COURSE_GOT_EVAL')+,
SQL Statment :-
select av.activity_version_id, avtl.version_name, av.language_id, av.start_date,
av.end_date, av.version_code, i.category_usage_id, upper(avtl.version_name) AS SORTVERSIONNAME,
XXARMS_TRG_EVALUATION_PKG.XX_COURSE_GOT_EVAL(i.category_usage_id, av.activity_version_id) Course_Flag from
ota_act_cat_inclusions i, ota_activity_versions av, ota_activity_versions_tl avtl
where i.category_usage_id = :1 and i.activity_version_id = av.activity_version_id and
nvl(av.end_date, sysdate + 1) >= trunc(sysdate) and
av.business_group_id = ota_general.get_business_group_id and av.activity_version_id = avtl.activity_version_id and
avtl.language = userenv('LANG') and
ota_learner_access_util.learner_has_access_to_course(:2,:3,avtl.activity_version_id) = 'Y'
And it is retriving the correct data for each row and i did not write any code in the RowImpl.
Thanks for your help in advance.
Regards...Ashraf

Dns issues with one domain (Resolved)

i'm currently having dns issues with one domain, in that it won't resolve when I use bt's dns servers.
The domain is owned by a friend in the US who runs his own server for irc, web, and I also have a server that is on his connection, and resolves fine from other machines on different networks, and also resolves fine when I set windows to use the opendns servers, but when it's set to either my routers ip (using bt's dns), or set to automatic (using bt's dns via the homehub), this one domain will not resolve.
I'm pretty certain it's not a windows issue, as it's a clean install of windows 7 that I did yesterday. I've tried rebooting the homehub, and also flushing my dns on windows, but this has not solved the issue.
As I say, it resolves fine on other networks, and also when I use the opendns servers, so I know it's definately a dns issue.
Using bt's dns servers:
C:\Users\admin>ping chatnsn.com
Ping request could not find host chatnsn.com. Please check the name and try agai
n.
Using opendns:
C:\Users\admin>ping chatnsn.com
Pinging chatnsn.com [68.51.24.74] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 68.51.24.74:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
(The timeouts are normal...he has his router set to not respond to ping requests).
Has anyone got any ideas on how to sort this out? Preferably without having to phone the helpdesk...lets just say i've done it in the past, and according to the poeple I spoke to in india, I knew nothing about my own systems, and it was a problem at my end...which was not the case, and I proved this several times.
Edit: This issue appears to have resolved itself, and the domain is now resolving again using the homehub for dns resolution.

Hi,
When NSLOOKUP starts, before anything else, it checks the computer's network configuration to determine the IP address of the DNS server that the computer uses.
Then it does a reverse DNS lookup on that IP address to determine the name of the DNS server.
If reverse DNS for that IP address is not setup correctly, then NSLOOKUP cannot determine the name associated with the IP address.
http://support.simpledns.com/kb/a90/nslookup-cant-find-server-name___-default-server-unknown.aspx
Also refer to:
How to fix NSLOOKUP Default Server: UnKnown?
http://www.randika.info/2013/01/how-to-fix-nslookup-default-server.html
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Essentials 2012 R2 Exchange Integration with Multiple Domain Controllers

Attempting to integrate Exchange Server 2012 with the Essentials wizard results in the error message: "This task must be performed on the domain controller." I've found several threads that speculate this is because there are multiple domain controllers
in the domain. Is there a workaround or patch available to resolve this issue? Why wouldn't Microsoft want the redundancy of multiple DCs?
Thanks.

Hi HartmannTek,
I agree with Robert.
We can get the following information from the article:
Services Integration Overview for Windows Server 2012 R2 Essentials - Part 1. Please refer to.
Currently, the Services Integration features, including Windows Azure Active Directory integration, Office
365 integration, Windows Intune integration, and on-premises Exchange integration, are only supported in a single domain controller environment. In addition, the integration wizard must be run on a domain controller.
Hope this helps.
Best regards,
Justin Gu

Office 365 tenant with multiple domains - What does Azure AD backend look like?

I'm planning a full cloud deployment of multiple services. I have a few domains I'll be using for email. My question is simple. If I create an office365 tenant, add 3 domains, and then go to AzureAD, do I have 3 Azure AD instances or a single directory?
I'm planning on leveraging Visual Studio Online, but it doesn't play nice with multiple Azure AD domains so I need to make sure I get this right.

you can do both. But normally you will use one azue ad, with all the suffixes in it. But you could create a Azure AD for every domain.
www.sccmfaq.ch

Problem Queries on tables with multiple domain indexes

I recently came across an issue in which the development team added a second context index to a table; that is, there was a context index on "title", and a second one was created on "summary".
Text queries on the new index do not always return results -- In one example, I get 77 rows querying the title, and 5 querying the summary (which, for the purposes of this explanation, always includes the title).
e.g. contains (title,'matha',1)>0 --> 77 rows
contains (summary,'martha',1)>0 -->5 rows
Inspection of the tokenlists shows that the correct pkeys are associated with the expected tokens, and the index is up to date.
So -- when I was asked to take a look at this, I vaguely recalled some issues with this functionality -- but I can't find any reference to this. The closest thing I could find was reports of problems when multiple contains clauses exist within the same query -- and that is not what is happening here.
What I would like to do is recommend moving to a single index with a multi-column datastore, and some reference to a bug # would make the process much faster.
Does anyone recall this issue?
DB Version 9.2.0.7
Sun Solaris 10

e.g. contains (title,'matha',1)>0 --> 77 rows
contains (summary,'martha',1)>0 -->5 rowsYou have searched for 'matha' without an 'r' in your first example and 'martha' with an 'r' in your second example. I don't know if this was just a typo in your post or if that could be the problem. If it is not the problem, can you post a reproducible test case or at least a copy and paste of an actual run of the two queries using the two contains clauses and the results of the count(token_text) for the search value from the dr$...$i domain index tables. I recall problems with two contains clauses in one query using an 'or' condition, but not with just one contains query where two context indexes exist.

Exchange 2013 Multi-tenant contact administration

Hi everybody!
Searched high and low, but couldn't find an answer.
I have deployed multi-tenancy Exchange as a service provider, and will look into self service portals later.
I'm currently developing all the powershell scripts needed to manage the multi tenant environment.
Question arrises:
How do you handle contacts in a multi-tenant environment?
Since a SMTP address can only be used once in an Exchange Organization, what if 2 tenants need the same contact?
- Use customattributes and filter on that? Than what if I want to use the multi-tenant AD for different purposes later?
- Use custom DACLs on the OU or contacts?
- Any other ideas?
Of course I started with
http://blogs.technet.com/b/exchange/archive/2013/02/20/hosting-and-multi-tenancy-guidance-for-exchange-server-2013-now-available.aspx but there's no mention of this issue.
Thank you for any input regarding this issue.
There's a new blog in town: http://msfreaks.wordpress.com

I would advise against "sharing" contacts, as each tenants requirements may be different. Meaning each may want to see different values for various attributes. You may want to stand up an ADLDS instance for each tenant which will hold their contacts independently
of your current Active Directory Forest that houses Exchange. This way, your Exchange Organization remains pristine, no never-ending queues/NDRs for ambiguous SMTP addresses, and each tenant can manage their own contacts without interfering with each
other. Also, I would look into Forefront Identity Manager (FIM).
Woody Colling, MCITP Exchange 2010 --The incentive for the experts to answer posts is to get their replies marked as helpful, or as the answer to our questions, help them help us, mark posts accordingly--

SMTP Authentication in Exchange 2013 multi tenant

I have configure a multi tenant environment. local domain is scurenet.local and i have host 3 different email domains like
abcd.com efg.com and xyz.com. now how its possible to create 3 mailboxes of same login in 3 different domains like [email protected] [email protected] [email protected] also
want to authenticate with there emailIDs and that is main issue. i can create 3 different logins like john1 john2 and john3 in AD and manually add smtp like [email protected] etc.
but issue is how i authenticate users with SMTP IDs so john1 can login using [email protected] and
password john2 use [email protected] as
login id and so on.

Hi,
I think you can try creating mailboxes for the three users and assign the full access permissions to each other.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Issue with multiple application installation and server share

Hi,
SCCM 2007 SP2 R3 ICP2
All servers W2K8R2
I am having an issue with software installs. When using a variable for multiple applciation installs, I get access errors when the applications go to install. It appears to be a multiple connection issue, but I can't figure out why.
I am using server shares for my DPs. The proper permissions are set. The servers (DP) are W2K8R2. I think it has to do with the way R2 handles the conenctions. I want to know if this is a known issue or if anyone has come accross
it.
I am going to post in the software distribution forum as well, but thought this would be a config question.

Hi! I'm waking up this dead thread but I've got a *very* similar problem!
I've got a SCCM 2007 SP2 R3 installation on Win2008. All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got three DPs in the same site-boundary as the
CM-server itself.)
Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
the same Task-sequence with the Multiple Package installation step
works fine in our site-boundary where the ConfigMgr-server is installed.
Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
<![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"> <![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"> <![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"> <![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"> <![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"> <![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"> <![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"> <![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"> <![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"> <![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"> <![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"> <![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"> <![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"> <![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"> <![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"> <![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"> <![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"> <![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4 CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15 CCMClientTimestamp: 2011-12-12T22:02:17Z CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg> ]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"> <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"> <![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"> <![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"> <![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"> <![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"> <![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
 <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
<![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
<![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
<![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
<![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
<![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
<![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
<![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
<![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
While installing a single package from the same DP (VAXCMDP01) looks like this:
![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
<![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
<![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
<![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
<![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
<![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
<![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
<![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
<![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
<![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
<![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
<![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
<![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
Notice that it never checks for DPs in the same way as the multiple package install:
<![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
Any ideas?
Kind regards,
Mathias

Multi Tenant Application with Subdomains

I have set up a multi tenant application on azure active directory. This all works fine. Lets say the url is https://www.myapp.com. Currently my "reply url" is therefore
https://www.myapp.com.
I then updated my application to create a sub domain for each tenant. e.g. customer1.myapp.com, customer2.myapp.com etc. This works but the trouble is that I need to manually add each customers url to the list of allowed reply urls which isn't
very scalable. Is there any way around this. Some kind of wild card would be great but doesn't seem to work. e.g.
https://*.myapp.com. Or is there another way that I am missing.

Hi Paul,
One option would be to do this would be
by adding conditional logic in the application itself(in the redirecttoidentityprovider event), or by hard-coding a reply attribute with the URL of the application in the wsFederation element of the application's web.config before deploying.

Exchange 2013: how to set up multiple domain for OWA and ECP

Exchange 2013 on Windows 2012R2
Currently we have set this up using the guide below:
http://mouzzamh.wordpress.com/2013/02/04/accessing-owa-from-multiple-domain-url/
We can access OWA and ECP using the internal IP address/owa or ECP but when we use the URL it fails.
We gave it an external IP address as well just to check if it will externally since the external DNS are pointing to the correct records: same issue it only works on IP address/owa or /ecp
We were able to follow the guide from start to finish including the certs..
The only difference on the guide and our exchange IIS environment for the new website is when he mentioned "Under IIS Settings / ISAPI and CGI Restrictions" we only have "ISAPI filters"...." ISAPI and CGI Restrictions" is only
applicable to the default and backend website..
Also, when the guide points to the path, should it be the new website path?
Or maybe to avoid confusion, can anyone guide me on how to do it or any other guide that helped you if ever you had the same issue as mine?
Thanks.

Hi,
Please run the following to check your OWA virtual directories for all web sites:
Get-OWAVirtualDirectory | FL Identity,*URL*,path
Personal suggestion, please consider to deploy another new CAS server. Then we can configure different OWA URLs in different servers. And pointed mail.domain.com and webmail.domain.com to two CAS servers respectively.
Regards,
Winnie Liang
TechNet Community Support

Issues with multiple things since Mavericks update

I installed the Mavericks update and since, I have been having multiple problems with different things on my MacBook Pro 13"
1. Printer issues: I have an HP officejet 6500 wireless printer (Officejet 6500 E709n Series), and now it's having major issues with printing, yet was working perfect prior to update. It will either cut out pages when printing PDF documents, or printing so slow that it has to take a break in between printing each document (an issue that all never occurred until update), to print documents back to back, it will stop after one document as though I have no other documents in queue to print, and pauses for an extremely long time (nearly a full minute, no exaggeration here, literally almost a full 60 seconds), something it's never done before this update. My Apps update even did an update to the HP software that is inside the Mac already to use printing (in other words, the mac doesn't need to have the HP software manually installed for it to work, it automatically sees the printer because it is connected to my wireless network just as my Macbook Pro which is also connected wirelessly to my network).
2. Internet issues: am now unable to click on certain links in safari that I was able to use prior to the update, yet they will open fine inside of firefox with no issues, yet I cannot always switch between two different browsers to perform task online (literally have to start all over inside firefox while in the middle of something in safari). Also lots of websites no longer work correctly and I have to constantly clear history and cookies to attempt to use certain sites, at times it will help, other times it wont work period, yet the same exact site will work perfect in firefox (which I do not use, only on my system for use on certain sites for school because in safari prior to the update, I would have issues with only the class site and some links not working at all, no spinning wheel, no errors, just nothing, no response of any kind, basically worse than what it was before the update). Another issue, hit Ctrl+a to select inside Safari and it highlights, but then when you click out of the highlight, it comes back on it's own several times without you hitting anything, just click inside the screen on a blank space (no links, etc) with touchpad.
3. System issues: My system is way slower than what it was prior to the update, click on things and it wont respond at all, then minutes later will eventually respond or pops up the spinning color wheel, which it either never responds or takes an extremely long time to respond. And no matter how much I restart, it doesn't help anything. Even just to sit doing nothing, no clicking or usage on the system, and the color wheel pops up.
4. Mail issues: Mail is now popping up completely blank messages that I have sent out, the person receives it with no issues, yet I cannot look at the message I sent neither in the inbox or the sent items when I need to look at them again, an issue not present prior to update. Also I an now having issues when receiving mail, sometimes it will check for mail and sometimes I have to manually click to make it check the server for mail, an issue not present prior to update as well.
As of now, since I have had the chance to used the system since the update, these are the issues I have had, yet haven't had the chance to check other things, so there may be other issues that are occurring that I'm not aware of at the moment. I knew it would be a mistake to do this "free" update and did so anyway and now having one issue after the next with each application I open to use.
Mac general info:
Mac is one year old, purchased brand new, no shareware programs of any kind installed.
Use for school and basic web surfing use.
Do not install any programs onto system that I'm unsure are safe (basically programs for/from school/school websites only, or from the Mac Apps store only), not even programs like Skype, nor any windows based programs of any kind.
Lots of free memory avail because I save everything onto external hard drives (purchased brand new as well, only 4months old) in case system crash occurs, only things on the system is Itunes music or pics from photo stream that sync to the system when Iphone connected.
Mac system info:
- Processor 2.5 GHz Intel Core i5
- Memory 4 GB 1600 MHz DDR3
- Graphics Intel HD Graphics 4000 1024 MB
- Software OS X 10.9
- Number of Processors:          1
- Total Number of Cores:          2
- L2 Cache (per Core):          256 KB
- L3 Cache:          3 MB

For those needing help fixing their system and putting it back to Lion or Mountain Lion, this is what I have done to eliminate all my issues in about an hour (depending on your internet connection).
Amazing thing, I just restored my computer back to Mountain Lion, and she's working perfect again, as I knew she would. E-mail popping into mailbox instantly as it should and did before the update, printer working fast as it was before update, no more freezing or glitches of any kind thankfully and finally. Here is the link that is through the Apple site to direct you on how to put your system back and get rid of Maverick's, that is assuming that is what you would like to do and also includes link for those wanting to try fixing the issue if that is your preference (most of this info is for those with mountain lion and some with the previousverisoin of OS X lion).
If you want to keep Maverick's here is a good post on the apple discussion board to help you out:
https://discussions.apple.com/docs/DOC-6161
If you just want to totally get rid of it and put back what you had before, this is the short version of how to do so:
https://discussions.apple.com/docs/DOC-3353
NOTE: This particular link has a lot of info on what to do for different situations, it is a bit lengthy, yet still very helpful.
OS X Mountain Lion: Reinstall OS X (direct from Apple support site, not someone else):
http://support.apple.com/kb/PH10763?viewlocale=en_US
OS X: About OS X Recovery (also from apple support directly and includes some instructions just the same as previous links above):
http://support.apple.com/kb/HT4718
Just in case you aren't sure what it will all look like as you are doing things, this is a link to show you a few pics of what you will see as you as you are going through the process, it can be helpful for those who aren't sure what they are doing or how to do things at all:
http://www.apple.com/osx/recovery/
This is a way to download the Mountain Lion disk info from the server
http://support.apple.com/kb/DL1433
I hope this helps someone, it was amazing for me and my system is working perfect again like it was, battery life is way better went from like 3 hours to like 5 (not on full charge by the way, after it sat for a while doing the online update which took a while so that's saying something alone, huge improvement). I plan to wait a while before attempting to reinstall Maverick's, long enough for them to fix the bugs.

Firefox issues with multiple users on a single computer.

I have an issue with Firefox and multiple users on my computer. There are two users setup and I'm running Win7 Ultimate x64. When the other user logs in, my settings in Firefox get screwed up somehow. Even if that user does not open Firefox.
Examples of problems this causes:
Gmail - Cannot load the standard interface, however it will load the HTML only interface.
Facebook - Cannot post anything.
vBulletin Forums - Some forums will no longer normally load - a text-only version loads as if I was browsing from a mobile device.
There may be other issues, but these are the main ones. If I clear my cookies, cache and browsing and download history, then restart Firefox, everything works again.
This seems to happen most often when the other user logs in, and uses Firefox to log on to their Gmail account.
How can I fix this?

Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Exchange 2010SP1 Multi-Tenant Issue with Multiple Domains

Similar Messages

Maybe you are looking for