Exchange 2013, a distribution group within a distribution group is not receiving emails.

Here's the explanation of what's going on:
"A" is an internal distribution group containing other internal contacts, and internal distribution groups "B" and "C". "B" is a working distribution group that contains all internal contacts. "C" contains all
external contacts, who will successfully receive emails sent directly to "C". The problem is, when you send an email to "A", everyone in "B" receives the email, but no one in "C" does. "C" is set to receive
emails from external sources and has correct SMTP settings as far as I can tell.
Is this problem related to the fact that "C" is full of external contacts? Is there a setting I'm missing somewhere that will allow "C" to receive emails sent to "A"?
Edit: Group "C" can not receive emails at all.

Sorry, i meant does the mailbox you are sending the email FROM have permission to send emails TO external email address?
Our exchange server is set up so that certain people can only email internal addresses. This is configured in the ECP under Mail Flow - Rules, and is basically configured to state that anyone within the AD group "internal only" to reject the message and
provide the explanation "you are not allowed to email externally".
If the mailbox you are sending the mail from is not permitted to email external contacts, it wont work.
It can be tested by emailing one of the addresses in Group C individually.

Similar Messages

SharePoint 2010 User Integration with Exchange 2010 New Users Created as Hidden and Later Unhidden not receiving email from SharePoint

When we have a new employee transfer to us from another department, their email is created and hidden until they actually make the transfer so they don't have two different email addresses in our global address list. When the transfer is made, the
email address is unhidden, but then we are unable to send emails to them from sharepoint 2010 without doing an IISReset. We are using Exchange 2010. Does anyone have suggestions on how to alleviate this issue?

Hi,
I have done a test, no matter the email address is hidden or not, we can both send email to the email address in the same domain.
How was the new employee from another department transferred to your department?
Whether sending emails to them need do an IIS Reset everytime.
Here is a similar post, you can take a look at:
https://social.technet.microsoft.com/forums/sharepoint/en-US/6a9043bb-2055-46a9-8e76-8b2698c1dbe5/user-not-receiving-sharepoint-emails
Best Regards,
Lisa Chen

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

User Group is not receiving email Sharepoint 2013 & Nintex workflow

Hi I created circular workflow using nintex and sharepoint 2013 , now problem occur that User group did not receive email notification through web portal , sending individual email address working fine but user group is not receiving
any email, not a single group is working now , to clear we used same workflow since last two years and all group received email earlier but now we are facing this issue since last 3 weeks. to resolve this we create new test groups and test but enable
to send.
looking for support to resolve this issue
Regards

This actually sounds like a problem that should be discussed on the Nintex forums, can you try over there?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured

Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured.
[PS] C:\Windows\system32>Get-TransportConfig
AddressBookPolicyRoutingEnabled                             : False
AnonymousSenderToRecipientRatePerHour                : 1800
ClearCategories
: True
ConvertDisclaimerWrapperToEml                               : False
DSNConversionMode
: UseExchangeDSNs
ExternalDelayDsnEnabled                                     : True
ExternalDsnDefaultLanguage                                  :
ExternalDsnLanguageDetectionEnabled                         : True
ExternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority                               :
ExternalDsnSendHtml
: True
ExternalPostmasterAddress                                   : [email protected]
GenerateCopyOfDSNFor                                        :
HygieneSuite
: Standard
InternalDelayDsnEnabled                                     : True
InternalDsnDefaultLanguage                                  :
InternalDsnLanguageDetectionEnabled                         : True
InternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority                               :
InternalDsnSendHtml
: True
InternalSMTPServers
: {127.0.0.1}
JournalingReportNdrTo                                       : <>
LegacyJournalingMigrationEnabled                            : False
LegacyArchiveJournalingEnabled                              : False
LegacyArchiveLiveJournalingEnabled                          : False
RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
RedirectDLMessagesForLegacyArchiveJournaling                : False
MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
MaxDumpsterTime
: 7.00:00:00
MaxReceiveSize
: 50 MB (52,428,800 bytes)
MaxRecipientEnvelopeLimit                                   : 5000
MaxRetriesForLocalSiteShadow                                : 2
MaxRetriesForRemoteSiteShadow                               : 4
MaxSendSize
: 20 MB (20,971,520 bytes)
MigrationEnabled
: False
OpenDomainRoutingEnabled                                    : False
RejectMessageOnShadowFailure                                : False
Rfc2231EncodingEnabled                                      : False
SafetyNetHoldTime
: 2.00:00:00
ShadowHeartbeatFrequency                                    : 00:02:00
ShadowMessageAutoDiscardInterval                            : 2.00:00:00
ShadowMessagePreferenceSetting                              : PreferRemote
ShadowRedundancyEnabled                                     : True
ShadowResubmitTimeSpan                                      : 03:00:00
SupervisionTags
: {Reject, Allow}
TLSReceiveDomainSecureList                                  : {}
TLSSendDomainSecureList                                     : {}
VerifySecureSubmitEnabled                                   : False
VoicemailJournalingEnabled                                  : True
HeaderPromotionModeSetting                                  : NoCreate
Xexch50Enabled
: True

hi stephan... lets put in this way... are you sending attachment ...did you checked the max attachment size as mail send size and attachment size are two different things.. please check this for info on different size creteria
http://technet.microsoft.com/en-us/library/bb124345%28v=exchg.150%29.aspx
can you please share the output of below three commands... i doubt your receive connector is not configured properly.
Get-TransportConfig | Format-List -Property MaxReceiveSize, MaxSendSize
Get-SendConnector | Format-List -Property Identity, MaxMessageSize
Get-ReceiveConnector | Format-List -Property Identity, MaxMessageSize
you can also check this link which gives a perfect info on how exchange works for email size... http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected]

Exchange server not receiving emails from gmail

Hi dear.
From 2 days ago our exchange server 2013 not receiving email from gmail account. but we can send from our exchange or outlook to gmail account.
we can receiving email from yahoo, hotmail, aol or other mail server But, just gmail account we can not receive email. plz help us, how can i do.
Thanks

Hi Beigi,
According to your description, I understand that Exchange cannot received the message from Gmail, however others works well.
Great checklist from Hotaka.
Additional, I want to double confirm whether any other antivirus and protection software in your environment, also the
Anti-Spam
or
Transport rule settings, for example sensitive words, IP block list and attachment filter, so that the message from external trigger constraints and be rejected. Meanwhile, please double check in OWA.
Besides, please use message tracking log to get more details for this issue. It’s more helpful to narrow down the problem, for your reference:
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
Best Regards,
Allen Wang

After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system.

After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system. I can send emails, but can not receive. I deleted my account and added it back with the directed provided by our Corporate IT, but I still can't receive emails. I've hard booted and soft booted my phone several times to no avail. What else can I do to help remedy this situation?

I don't have any other email accounts on my phone and I don't get any type of error message. It just says "Checking for Mail" and I receive nothing, so I know that it is accessing my work email system. I haven't made any changes to my account. I only accepted the message to update my carrier system.....I do have an appointment with the local Verizon store to see if they can help.
Just FYI, my Exchange email account still works on my iPad, so I'm pretty sure the settings are correct.

Not receiving email sent to Distribution List?

Hi all
My client has a 8900, for which I have set up Exchange email via BIS.
Everything works ok except the blackberry doesnt sync any messages sent to distribution lists he is part of.
Outlook mailbox is working fine, showing all emails.
I'd imagine this is a common question but the search is throwing up an error and I cant find an answer!

did you found solution for this one I've got similar issue
exchange 2007, emails sent to distribution group are fine in outlook but not on the Blackberry device, all other emails on the device works fine ...

Apps for Outlook on Exchange 2013 only work in Safari on Mac OS X (not anywhere else)

With Exchange 2013 SP1, a few "Apps for Outlook" are installed by default. I have not been able to get any of them to actually work... UNLESS I log into OWA from Apple's Safari web browser on Mac OS X. Safari on Windows loads the "lite"
Outlook Web App which doesn't load "Apps for Outlook" at all.
OWA on Internet Explorer 11 lists the apps within the emails, but they don't work (see screenshot). The full Outlook 2013 desktop program lists the apps as well, but again they don't work at all.
Am I missing some sort of configuration on Exchange 2013 that gets these to work on Microsoft's web browser and email client products? It's kind of strange that they work on Apple's products so easily. I've tried Chrome and Firefox on Windows
as well, but those don't work either.

Ah, okay. From the Exchange Management Shell, I did "Get-ECPVirtualDirectory | FL"
AdminEnabled                    : True
OwaOptionsEnabled               : True
Name                            : ecp (Default Web Site)
InternalAuthenticationMethods   : {Basic, Fba}
BasicAuthentication             : True
WindowsAuthentication           : False
DigestAuthentication            : False
FormsAuthentication             : True
LiveIdAuthentication            : False
AdfsAuthentication              : False
OAuthAuthentication             : False
DefaultDomain                   :
GzipLevel                       : Low
WebSite                         : Default Web Site
DisplayName                     : ecp
Path                            : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\ecp
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags         : {}
ExtendedProtectionSPNList       : {}
AdminDisplayVersion             : Version 15.0 (Build 847.32)
ExternalAuthenticationMethods   : {Fba}
AdminDisplayName                :
ExchangeVersion                 : 0.10 (14.0.100.0)
All seems to be configured as you say. I didn't change anything, but realized the ExternalURL was pointing to DOMAIN.com/ecp which had a DNS issue, where-as
www.DOMAIN.com and mail.DOMAIN.com were all working. So,
www.DOMAIN.com/owa was working fine on everything (except the Outlook Apps on Windows PCs), but DOMAIN.com/owa was not. Now that DOMAIN.com/owa is working correctly, it seems that Outlook Apps are working correctly
too. I guess even though we are accessing everything via
www.DOMAIN.com or mail.DOMAIN.com, the Outlook/Exchange Apps are still accessing stuff via
http://DOMAIN.com instead (unless the client is using Mac OS X Safari). That sounds like that should be a bug in the way the Outlook Apps are loaded, no?

Exchange Server 2013 not receiving emails

I have a new Exchange 2013 mail server installation (no migration - completely new domain and everything). For some reason the server is not accepting mail from the Internet. My router is indicating it is forwarding SMTP packets to the Exchange
server's IP address, but nothing shows up in the message queues or users mailboxes. The event viewer is giving me no clues. No errors. This is a simple installation - one Server 2012 DC and the Exchange server. One Exchange server in
a domain environment. The receive connector looks correct. It is using port 25 and I indicated to use the IP address of the Exchange server network card. Any ideas as to how to configure the receive connector? Thanks!

Greylisted is an anti spam check done on exchange. However to me this would meanone of two things.
1: The inbound email domain is listed not your exchange server. Your Exchange server seems to be set up to only allow inbound mail from specific domains perhaps instead of * (All).
2: More likely i think is that your domain is not set up in Exchange.
In order to test the product you probably want to create your own domain, and that is easily done in the Exchange Admin Center by clicking the Mail Flow item
and then Accepted Domains in the tab area and finally the Add… icon, <o:p></o:p>
Type in the information and click Save,
the new domain will show up on the List View.<o:p></o:p>
For reference you can check if your domain is blacklisted here: http://mxtoolbox.com/blacklists.aspx but i am sure this is not your issue.
Martin

Exchange 2013 OWA user must change password at next logon not working

Hi,
I have installed Exchange 2013 on Windows 2012 Server. I create users in ECP and select "user must change password at next logon" option. When newly created user logs in, the OWA page doesn't prompt for password change and just throws error "The
user name or password you entered isn't correct. Try entering it again"
I have enabled Change Password feature in CAS server, but still not working.
Any answers, suggestions would be great help
Regards
Sunil

Hi Sunil,
Have you tried as Martina said and does it work?
If not, please try to set the Minimum Password Age to 1 according to link below. I found some threads which are similar to yours and were solved by this way in Exchange 2013 environment.
http://support.microsoft.com/kb/827614
And for further troubleshooting, please create a new user with "user must change password at next logon" option checked and see if he can log on domain-joined PC.
In addition, please check the event log to see if there is any related error message.
Regards,
Rebecca

Clean install Exchange 2013 on win2012 server and separate win2012 R2 DC not sending mail from Outlook

Hello,
I'm struggeling with a problem. I've a clean installed exchange 2013 on a windows 2012 server. The DC is on a separate server. But I can't send a mail from Outlook and the recieve connector is correctly configured. There are no error's and mail in the queue
Even sending a mail from the OWA ends in the Drafts folder from that user.
Can somebody help me with this?
Thanks Michel

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Exchange 2013 logging event 15004 daily 5-10 times per day causing email delay?

Observing following event in the Servers (3 Servers having multi role with Exchange 2013 CU5)
Log Name: Application
Source: MSExchangeTransport
Date: 15/10/2014 3:20:16 PM
Event ID: 15004
Task Category: ResourceManager
Level: Warning
Keywords: Classic
User: N/A
Computer: SERVER.COM
Description:
The resource pressure increased from Medium to High.
The following resources are under pressure:
Version buckets = 203 [High] [Normal=80 Medium=120 High=200]
Physical memory load = 92% [limit is 94% to start dehydrating messages.]
The following components are disabled due to back pressure:
Inbound mail submission from Hub Transport servers
Inbound mail submission from the Internet
Mail submission from Pickup directory
Mail submission from Replay directory
Mail submission from Mailbox server
Mail delivery to remote domains
Content aggregation
Mail resubmission from the Message Resubmission component.
Mail resubmission from the Shadow Redundancy Component
The following resources are in normal state:
Queue database and disk space ("C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\mail.que") = 61% [Normal] [Normal=95% Medium=97% High=99%]
Queue database logging disk space ("C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\") = 75% [Normal] [Normal=95% Medium=97% High=99%]
Private bytes = 2% [Normal] [Normal=71% Medium=73% High=75%]
Submission Queue = 0 [Normal] [Normal=2000 Medium=4000 High=10000]
Temporary Storage disk space ("C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Temp") = 75% [Normal] [Normal=95% Medium=97% High=99%]
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeTransport" />
<EventID Qualifiers="32772">15004</EventID>
<Level>3</Level>
<Task>15</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T09:50:16.000000000Z" />
<EventRecordID>36645321</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER.COM</Computer>
<Security />
</System>
<EventData>
<Data>Medium</Data>
<Data>High</Data>
<Data>
The following resources are under pressure:
Version buckets = 203 [High] [Normal=80 Medium=120 High=200]
Physical memory load = 92% [limit is 94% to start dehydrating messages.]
The following components are disabled due to back pressure:
Inbound mail submission from Hub Transport servers
Inbound mail submission from the Internet
Mail submission from Pickup directory
Mail submission from Replay directory
Mail submission from Mailbox server
Mail delivery to remote domains
Content aggregation
Mail resubmission from the Message Resubmission component.
Mail resubmission from the Shadow Redundancy Component
The following resources are in normal state:
Queue database and disk space ("C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\mail.que") = 61% [Normal] [Normal=95% Medium=97% High=99%]
Queue database logging disk space ("C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\") = 75% [Normal] [Normal=95% Medium=97% High=99%]
Private bytes = 2% [Normal] [Normal=71% Medium=73% High=75%]
Submission Queue = 0 [Normal] [Normal=2000 Medium=4000 High=10000]
Temporary Storage disk space ("C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Temp") = 75% [Normal] [Normal=95% Medium=97% High=99%]
</Data>
</EventData>
</Event>
Manju Gowda

hi manju.. this is because of your resource utilization being very high. please check below two links to check the logs and take appropriate actions
http://exchangeserverpro.com/exchange-transport-server-back-pressure/
http://technet.microsoft.com/en-us/library/bb201658%28v=exchg.150%29.aspx
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected]

Not receiving emails from internet to email ids of exchange 2013

hi
1) i installed exchange 2013 , mails going out well, coming well, but from internet mails r not receieving to email ids of exchange 2013, i added receive connnector also, but not working.
2) how to take backup of exchange 2013 & individual mailbox of mail id
pls

Hi
For your question
Make sure that the anonymous permission is enabled on the default receive connector
Make sure the port 25 is open for inbound and outbound in your firewall
Telnet to port 25 from external network to your domain and ensure port 25 is open
To take a back up it may not be easy to answer on this because it depends on the bckup software you are using.
If you are using Windows server backup then you have the below tech-net which you can refer
http://technet.microsoft.com/en-us/library/dd876854(v=exchg.150).aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

HELP ... Not receiving email messages from particular Yahoo Group

Ever since the evening of 3/26 every member of my Yahoo Group with an email address from Comcast.net has not been able to reliably receive messages from the group. Out of over 40 emails since then, we've received 4 (2 on 4/1 and 2 this morning). There are no error messages involved, there are just no emails in our inboxes. Yahoo does not indicate that any of the messages have "bounced". The messages are not in my spam folder (in fact, the first Comcast "helper" i worked with had me turn off the spam filter in Comcast,net) Oddly, I (and the others) can receive messages from other Yahoo Groups that we are members of, just not ours: SoundOfNewEngland I was on the phone with Comcast for 2.5 HOURS on 4/3 and was basically told that since I could receive a test message from Comcast that the error must be with Yahoo! After contacting Yahoo, I was told that since others in the group can receive the messages, that the error must be with Comcast. <sigh> The last email I got from Yahoo said that Comcast would need to add Yahoo info into the Comcast whitelist. I told this to a Comcast technician during a help chat on 4/5 ... and she told me to fill out this form: http://www.comcastsupport.com/sdcxuser/asp/comcast_blockedprovider.asp I did that even tho the issue is that the Yahoo Group's messages were being blocked and I didn't have an IP address for those, but I could provide the domain name: yahoogroups.com I tried to put the info that Yahoo Groups gave me for the whitelist, but the description is limited to 1024 characters Needless to say, I have not received a resonse from Comcast within 24 hours of posting the form Here is the info from Yahoo!: "Since you have already reviewed your settings, and confirmed that the emails are not landing in your spam folder, you will need to follow up with your email provider again, since it appears that they are dropping emails from the group. Email providers generally do this because they think a message is spam, and they are particularly likely to use this approach with bulk messages coming from an email list.
If you have not done so already, you can provide them with the following link:
http://tech.groups.yahoo.com/group/ygmailadmin/
There, they can find a current list of all of our outgoing email servers for white listing.
They can also contact the owner of this official Yahoo! Group, for further assistance in troubleshooting this issue, by sending an email to:
[email protected] However, if your email provider continues to fail to deliver your Yahoo! Group messages, we strongly suggest you consider changing your email provider to another provider who will. This doesn't necessarily mean you need to change your ISP. You can also use a free Web-based email service like Yahoo! Mail or Hotmail while retaining your current ISP." If it helps, the Yahoo incident # is: 120402-011733 It's not a big group, only 86 members. All together we generate maybe 100 messages a month ... not even close to being considered spam. Most of the members are older and not comfortable with new technology. Asking them to create new emails is not an option. This group is our primary means of communicating with each other, so the sooner we get this resolved, the less stress for my members! I'm sorry for the length of this message, i'm just trying to provide all the detail i can. I hope you can help. Thanks,Carol

more info: I usually get my mail using Outlook, but the messages are not there when I view them directly on Comcast.net either .... I'm using Chrome for a browser and have VISTA for my OS Here's a message header from the most recent email sent to the group that I did not receive (i will xxx out the email addresses) at my Comcast address but DID receive at my Yahoo address:
From Eileen Fri Apr 6 11:56:17 2012
X-Apparently-To: [email protected] via 72.30.239.82; Fri, 06 Apr 2012 11:56:22 -0700
Return-Path: <sentto-512785-10246-1333738581-sxxxxxxx1=yahoo.com@returns.groups.yahoo.com>
Received-SPF: none (domain of returns.groups.yahoo.com does not designate permitted sender hosts)
bzpwPjwvc3Bhbj48L2ZvbnQ.CgogPC9vOnA.PC9zcGFuPjwvZm9udD4KCiAg
SWYgd2UgaGF2ZW50IHNlZW4geW91IGluIHlvdXIgdHdvIHBpZWNlCmJsdWUg
b3V0Zml0LCB5b3VyIGJsdWUgY2hva2VyIGFuZCBlYXJyaW5ncyBhbmQgeW91
ciBzaWx2ZXIgc2hvZXMsIHBsZWFzZSBjb21lCnNlZSB1cyBuZXh0IFR1ZXNk
YXkuICBPdXIgc2hvdyBpcyBmYXN0IGFwcHJvYWNoaW5nIGFuZAEwAQEBAQ--
X-YMailISG: e3e1T3cWLDu.Osw7OOZubcQqoSFUnmYIENQDkbvkbj.f1YSG
jeAsGCF.2eVO0JR1Ont3IrpMUmJCMBHXwJV6tuJpHB5.LPn7VwqkcfADDoed
JOpt.3LNoYA23EaFa_OUJb0doF5L55CZJKrWyKutYx3q1ycssiBzIPYq1YRq
M6NG_VY0ImWBg704ufqziQ.3Y1dS6xtLcUrzsWfqrlj_a8X752hy7fRfHOOI
OL03MhCTHdMXCd81eu4z36yWv5gYdqwWLvmSjxmXWez67MS5YnOOLiQE2vvJ
kZqaHBfyJgJvY5boLHYBm5dzwq1b5ymrD.XjqipzCyn.Ly3e_9XMgLO1.d0n
Zq3qDhV49SvAEuOO4RxU0DXCdJw5gdQfC0qFyPvguMpUd_6Assu__D2Sb7v_
.Dk1RzStQW2dWjZKZyrAJi8ixfshB9l6JyfbGTI8TjohFgWkbylHw.qPQ7eT
CB4.S7zJ81hwssFjfk1A2PS4qZo_dlP6j1VkohVKlVx07Q2hOk2BEAl4FdN.
ltjgDcrFVVz4Ue9Uznv2lzPNjXDqna.BA9cJtVWWRMLUhDN9pLG7CYHmgm_l
G_4.FHji7x8NuZLgOZKW__lQsWoLLBfZQCEgbsAUyghT7RA9L31QPL2BZcMF
4nJkstskat7oY244L9yxqA_n.3z_qZjaK9zjqUClMD8FI7QcYvfTq3eXDNPb
odKsaHP8iUUMrnDaKMh6RE9RmtQx399fT59iDM2djhFiwZMON5570vs4vKTx
nkJkR_ls_6j85AFGBHxsNd5nBOI0o241qOczrttmahzI08LSCcIH17eaZImm
9FYLJK606YV9wnY7xA9QAiMfhs7VYi4JSiby6zfpEL9cZwC3XCPW2.8nwiZR
0BvvZ47rDEzGPJR.kawsSssoqK9xg1ar8zd4O46i_VXvQSMkrlm5PWtAEIGp
fcVzHsllXBltFn2hqGHPPIKTBqUcQ7jkNbchUQnuYQ3ecbyfd0QnFBl7ufL2
PrzOKX09XggZs0OUt8iQQtmgE3Zjn8FGw.cyh3eoCNcRoFf9QaPyKTRegA.e
miJ3O3jckBWROX_kE0Smh9VcVAFLRkZu93BSNDpWsnwp3VqaPxmAVOpsrEPf
uBEqtMr9RwxD.n8JmAzItxKht0GzNI5Bwf1eK3gerM7bZRxk3lppAmMBWv06
IrfCL9_EJnFGcGy_lYsz77DGDktIBXCqb_IAx4dVAoTySc700TnINLEQxkVH
Y32iGH8-
X-Originating-IP: [98.139.165.5]
Authentication-Results: mta1260.mail.ac4.yahoo.com from=yahoogroups.com; domainkeys=pass (ok); from=yahoogroups.com; dkim=pass (ok)
Received: from 127.0.0.1 (HELO ng2-ip9.bullet.mail.bf1.yahoo.com) (98.139.165.5)
by mta1260.mail.ac4.yahoo.com with SMTP; Fri, 06 Apr 2012 11:56:22 -0700
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1333738582; bh=sG8gHMXUATS8FPacoEmQj76vBTuNbmLCXaXWAAi6isw=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-IronPort-AV:X-Received:X-Received:To:Cc:Thread-Topic:Thread-Index:Message-ID:Accept-Language:Content-Language:X-MS-Has-Attach:X-MS-TNEF-Correlator:acceptlanguage:X-Originating-IP:X-eGroups-Msg-Info:From:Sender:MIME-Version:Mailing-List: Delivered-To:List-Id: Precedence:List-Unsubscribe: Date:Subject:X-Yahoo-Newman-Property:Content-Type; b=Rm1y/6pBXsTuRSaDcXiCTVvq2gag2bxCn33QtzJ758CZ+3HKtQKe+XN6lTdZpP+/vDm8tdDSIdtzb9KhdtvVWcJXijUMLCdwNCBpJGVkKxX14dHjh2y/SRJ+4lHzbXvh
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com;
b=LDjKTTQnA7I/VM4aeY0zRYwkr8NkUMk8LYaBXfnp3GE2q15fsiVZ5fdkeGROAluMK5ybf06af+JzduWb03vJAnmi71j5m0l5bFNZjgBsy0u55hLT6nXABUubEMgRR51M;
Received: from [98.139.164.120] by ng2.bullet.mail.bf1.yahoo.com with NNFMP; 06 Apr 2012 18:56:22 -0000
Received: from [98.137.34.40] by tg1.bullet.mail.bf1.yahoo.com with NNFMP; 06 Apr 2012 18:56:22 -0000
X-Yahoo-Newman-Id: 512785-m10246
X-Sender: [email protected]
X-Apparently-To: [email protected]
X-Received: (qmail 48751 invoked from network); 6 Apr 2012 18:56:20 -0000
X-Received: from unknown (98.137.34.45)
by m4.grp.sp2.yahoo.com with QMQP; 6 Apr 2012 18:56:20 -0000
X-Received: from unknown (HELO mail02.bmchp.org) (216.57.136.41)
by mta2.grp.sp2.yahoo.com with SMTP; 6 Apr 2012 18:56:20 -0000
X-IronPort-AV: E=Sophos;i="4.75,382,1330923600";
d="scan'208,217";a="146119"
X-Received: from excahtp1.bmchp.org (HELO EXCAHTP1.healthnet.org) ([172.16.100.21])
by mail02.bmchp.org with ESMTP; 06 Apr 2012 14:56:19 -0400
X-Received: from EXMBCL1.healthnet.org ([169.254.1.124]) by
EXCAHTP1.healthnet.org ([::1]) with mapi; Fri, 6 Apr 2012 14:56:19 -0400
To: "'[email protected]'" <[email protected]>
Cc: "'[email protected]'" <[email protected]>
Thread-Topic: fittings
Thread-Index: Ac0UJvLIs9IpwqtfSy+hSVXx3b26bQ==
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
acceptlanguage: en-US
X-Originating-IP: 216.57.136.41
X-eGroups-Msg-Info: 1:12:0:0:0
From: Eileen <[email protected]>
Sender: [email protected]
MIME-Version: 1.0
Mailing-List: list [email protected]; contact [email protected]
Delivered-To: mailing list [email protected]
List-Id: <Soundxxxxxxxx.yahoogroups.com>
Precedence: bulk
List-Unsubscribe: <mailto:[email protected]>
Date: Fri, 6 Apr 2012 14:56:17 -0400
Subject: [SONE] fittings
X-Yahoo-Newman-Property: groups-email-tradh-m
Content-Type: multipart/alternative;
boundary="_000_69C23C04D36F874092DCF98593C8DA539D4824864BEXMBCL1health_"
Content-Length: 7828 Thank you for any guidance you can provide

Exchange 2013, a distribution group within a distribution group is not receiving emails.

Similar Messages

Maybe you are looking for