Exchange 2013 cant send or receive email

new server with clean install
static IP
firewall is configured for smtp on port 25
single exchange 2013 server
checked DNS settings in servers tab
checked mail connectors per MS KB's
deleted all connectors and rebuilt only 1 send and 1 receive connector
still not sending or receiving email they stay stuck in drafts and email never gets delivered coming in
David Sheetz MCP

Can users send email to each other, in house? Is the Exchange Server part of a domain, if so, what OS is the Domain Controller? Check list to run through:
1. Port 25 is forwarded to Exchange Server IP address
2. Send Connector is using MX Records and using * for the domains
3. Receive Connector has the appropriate domain listed for the Accepted Domains, ie. Contoso.com not just .local
4. mailbox username convention has been specified and you clicked the "Apply" link to the right after creating the mailbox username policy
5. After the above, go into Services and restart the Exchange Mailbox Store

Similar Messages

I cant send or receive emails from my second email account on my iphone. i have uploaded i0S7 how can i fix this problem?

i cant send or receive emails from my second email account on my iphone. i have loaded i0S7. i was told that it doesnt like two emails with the same address so i changed from a hotmail to a yahoo account and still not working. can anyone tell me whats going on? thank you

Contact the email provider to troubleshoot the issue.
hotmama4278 wrote:
i was told that it doesnt like two emails with the same address
That's a load of manure.

I still cant send or receive emails on ipad2

I still cant send of receive emails on ipad2 , there must be something wrong in my server details

Hi Have you got WiFi or just a mobile signal If you can get a good mobile signal but no wifi you need a WiFi dongle Not the plug in type the stand alone one you can run upto 5 devices at once You can get one on contact or PAY& GO Ask someone to get one for you from shop go for the best Mobile signal were you need to use it If you are in the UK EE on 4G are best. Hope you get better soon. Cheers Brian

Cant send or receive emails with my nokia 300

my email is with slingshot so i go to messaging and setup my email address in other since slingshot comes under other email providers.... i put in my email addy and password and the phone accepts it and takes me to my inbox but when i try to send and receive emails it comes up and says >> could not send email,please try again....
i have spent about 4 hours on the phone 3 times to nokia in the phillipines of all places and they cant even help me get it working..... yet when i put in my hotmail addy it sends and receives straight away...
I have spoken to slingshot and vodafone & i have got the incoming and outgoing mail server details correct but the phone wont let me put them in the details for incoming and outgoing servers.... HOW STUPID IS THAT ????
the only way it will let me enter those details is by putting my email addy in wrong and then it lets me do it but then my email addy is wrong...cant bloody win
can anyone who is using slingshot email with a nokia asha 300 please help ??
thnx

Contact the email provider to troubleshoot the issue.
hotmama4278 wrote:
i was told that it doesnt like two emails with the same address
That's a load of manure.

WHY DOES IT SAY SERVER ICLOUD NOT WORKING? I CANT SEND OR RECEIVE EMAILS

i cannot send or receive emails suddenly. its saying icloud server not working... i have recently changed my password but its not letting me use email still.

Hi there lungi1971,
I would recommend taking a look at the troubleshooting steps found in the article below.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W.

Mirgating ro exchange 2013 cant send email internally

Greetings,
I'm in the process of migrating our exchange 2010 environment to 213 Here is our current setup
2 2010 Exchange servers EX2010-01 (MB, CAS, TRANSPORT) EX2010-02 (MB) we have a DAG between 2 servers
I've installed 2 2013 Exchange servers EX2013-01 (MB,CAS) and EX2013-02 (MB-CAS) and created a DAG between 2 servers
I was able to successfully migrate one of the test mailboxes from 2010 to 2013 and added both 2013 servers to send connectors. I'm able to connect to Outlook/OWA on the LAN and send/receive emails to external accounts. I'm also able to receive
email from internal accounts. However I'm not able to send emails from Outlook to local users that are still connected to the old Exchange 2010. Looks like email goes out and showing in sent folder but never gets delivered to the local recipients
I checked exchange tracking log and I'm able to send email to myself by anyone else internally is showing as "submit storedriver"
alex serdyukov

Hi Alex，
According to your description, my understanding is that you cannot send email from the mailbox on exchange 2013 to the mailbox on exchange 2010, right?
Did you get any NDR message when you send email to internal user?
In addition, please check the permission of receive connector on exchange 2010 server :
Get-ReceiveConnector |fl name, permissiongroups
Best regards,
Niko Cheng
TechNet Community Support

Mac cant send or receive email.. or view some websites.. started yesterday.

I have to ask this question from our PC because the Mac cant even get to the "login" page for the Apple Discussions.
Apparently started yesterday after I got back from vacation. I cant view some pages that have a "log in" area. Specifically, I cant get to this place because the "log in" page times out. I cant get to my web panel for my domain host. I CAN log into our printers website, but when I go to the Manage Accounts link, that times out.
I also cannot get email.. sending or receiving.
I can do ALL of this from this PC I am on right now so it has to have something to do with the Mac. I tried logging into a different "User" on that machine but the same thing happens. I also cannot get any of the internet radio stations through iTunes.
I have shut down and restarted the Mac several times. I turned off the cable modem and unplugged the routers to let them reset. Still the same problem. Its like its a weird network issue on the Mac. Any thoughts would be appreciated. The Mac is our main production machine and this is causing me lots of issues. Thanks.

Specifically?
Its trying to connect to the servers in the Activity Viewer.
Then in the Mail Connection Doctor window, for my account, it says "Could not connect to this POP server. Check your network connection and that you entered the correct information in the Account preferences"
For the items in my outbox that it tries to send, it tries for a minute or two then pops up one ofthe messages with a drop down that says "cannot send message using the server mail.charterinternet.com
Use the pop-up menu below to blah blah blah. It wants me to try a diff outgoing mail server. We dont have a diff outgoing mail server. ISP confirmed there were no email outtages. So I just have to hit "Try again later" button to get rid of that.
As for the other email accounts, they get the same message in the connection doctor that I stated above with my account.
The email works fine via webmail (logged in through Safari).. and the mail works fine in Opera on this PC.

I cant send or receive email.

This just started last night and continues today any one else having problems with cant connect to server?

Started having a problem this morning with my att.net email. First one email then another. Can't figure out what is going on.

Cant send or receive emails

Alright, not sure why but the other night I was trying to send an email and it wouldn't send and it was working fine the day before. All it was saying is "The connection to the server “mail.mac.com” on port 993 timed out". Any ideas on a fix? Thanks
Message was edited by: eravendj

Hi, try changing to Port 25..also reset your name & password..
With .mac you could also set up a New Account & see if that works..Also If you have iDisc try resetting your password. Just tips I learnt from having the same issue..

Cant send or receive email from my Iphone5 icloud account, what changes in the Settings should I do?

i have an existing me.com email on my IPAD2, then i had my iphone 5 activated, created an Icloud email, which is not working.
The outgoing email was rejected by the server. What changes do i need to do on the Settings to correct this?

If the settings are correct?, Then delete the account and start over. You may also try to restart your phone by holding the home and off button down till the apple symbol comes up.

HT204053 I cant send or receive mail online with my imac

need help , cant send or receive emails on my imac? i have internet connection but the mail is not working???

Contact the email provider to troubleshoot the issue.
hotmama4278 wrote:
i was told that it doesnt like two emails with the same address
That's a load of manure.

Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email

We have a user that was complaining about not being in the address book anymore. After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too. As far as I know, she is the only user
having this problem.
She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff. At her computer, I tried repairing her email (under account settings) but the process would fail when
searching for her settings. I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
Configuration -> Disconnected Mailbox.
Some info on our setup:
Exchange 2007 on Windows Server 2003r2
AD is on Windows Server 2008r2
Her computer is running Outlook 2010
I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed. She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.

First things first - is her mailbox hidden from address lists? Run
Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out. It probably isn't, but we need to clear this, just in case.
Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory? Often, when the name on a mailbox is changed, the display name is not - and vice versa. Also, has her email address also changed?
If so, has a secondary proxy address been added to reflect her maiden name? I'd do this, just to be sure things aren't lost that should be delivered to her.
I can't think of anything else obvious right now. After you've checked these things, get back to us with their results.

Exchange 2007 SP1 don't send or receive emails after main DC shutdown

I have two DC (DC1 and DC2), both of them GC and DNS.
After shutting down DC1 (with all the roles instaled), Exchange 2007 stops to sending and receive emails, but Outlook clients can process the request of sending emails (like it has been sent) and "Connected To Exchange" is showed correctly.
If I switch on again DC1, the pending messages are sent and received (internal or external).
I thought that making GC also the DC2, Exchange could work in the same manner in a DC1 failover scenario.
Maybe any kind of info in Exchange for main DC is cached and needs to be updated or so?
Thanks in advance

Hi,
DC and GC hard failures are generally handled seamlessly by DSAccess if other servers are available. However, GC failures can impact Outlook clients harshly depending on the version of Outlook being used. Worst case scenario is that Outlook ‘hangs’ and the
user must restart. The exception is Outlook XP (Outlook 2002) which can automatically reconnect to a new GC without a restart.
More details about Exchange 2007 Disaster Recovery:
https://technet.microsoft.com/en-us/library/aa998848(v=exchg.80).aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Problems sending and receiving emails using exchange when on wifi - OK when using Sim Card

I've an iphone 4S using Exchange to link up with company server, this works fine when using 3G - phone's Sim Card. But when I join a wifi network I can no longer send and receive emails until I disconnect from the wifi network.
Has anybody any ideas?

Hi Derick,
you need to make sure the following is met:
1- router is correclt setup and antennas are plugged
2- users are withint good range from the router
3- use a good channel for the router, one of either 1, 6 or 11. try to figure out which is the best channel to choose using a freeware site survey tool.
4- ssid configuration doesn´t involve eap and session timeouts.
if you have doubts, let me know
cheers
Serge

I cant send or receive texts and cannot send email? why oh why

bueller? i cant send text or emails

Bigbuck9,
Let's get to the bottom of this. What make/model phone do you have? What happens when you try to send a text? Please share, thanks!
ErinW_VZW
Follow us on Twitter @VZWSupport

Exchange 2013 cant send or receive email

Similar Messages

Maybe you are looking for