Exchange 2013 CU2 - MapiExceptionRecoveryMDBMismatch

I have run a 'New-MailboxRestoreRequest' to restore a mailbox from a mounted recovery database. In the Application Event Log, from the 'MSExchange Mailbox Replication' source, I get the following:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RecoveryDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Lid: 52176 ClientVersion: 15.0.712.17
Lid: 50032 ServerVersion: 15.0.712.6014
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x48D
Lid: 26937
Lid: 21921 StoreEc: 0x48D
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 61208 StoreEc: 0x8004010F
Lid: 57721 StoreEc: 0x8004010F
Lid: 50608
Lid: 45768 StoreEc: 0x48D
Lid: 56872 dwParam: 0xFE
Lid: 42712 StoreEc: 0x48D
Lid: 10786 dwParam: 0x0 Msg: 15.00.0712.012:DOMAIN-EX13MB01
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x48D
Lid: 26297
Lid: 16585 StoreEc: 0x48D
Lid: 32441
Lid: 1706 StoreEc: 0x48D
Lid: 24761
Lid: 20665 StoreEc: 0x48D
Lid: 25785
Lid: 29881 StoreEc: 0x48D
Any ideas?

Hi,
The user AD account maybe deleted or disabled and recreated with a new mailbox. It now may have a new GUID. Restore would fail as the GUID is not available.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Similar Messages

  • Exchange 2013 CU2 to CU3 OWA now redirects to IIS page

    so i did the the update from Exchange 2013 CU2 to CU3 last night and i am unable to access OWA. when i go to the site i initially received a 403 forbidden error but i cleared out the require SSL, which somehow got re-enabled, and now it redirects to the
    IIS 8 page. 
    In IIS it seems like the redirect values for default web site got cleared away. I put in the address that was previously there and then e-mail for the whole company goes down after an IIS reset. In the default web site i entered to redirect to https://mail.contoso.com/owa
    like how it was before but that doesn't work. 
    any ideas/feedback would be great!
    Thanks!

    I guess you are running a multirole server.
    Did you try removing the OWA virtual directories -  for both Default Website and Exchange Back End site with:
    #Replace ServerName
    Remove-OwaVirtualDirectory "ServerName\owa (Default Web Site)"
    Remove-OwaVirtualDirectory "ServerName\owa (exchange back end)"
    and re-creating them again with:
    #Replace ServerName & mail.domain.com
    New-OwaVirtualDirectory -InternalUrl "https://ServerName/owa" -ExternalUrl "https://mail. domain.com/owa"
    New-OwaVirtualDirectory -InternalUrl "https://ServerName/owa" -ExternalUrl "https://mail. domain.com/owa" -WebSiteName "Exchange Back End"

  • Exchange 2013 CU2, Alert for OWA Health set unhealthy from SCOM 2012

    I am facing issue in Exchange 2013 CU2, I got this alert from SCOM 2012 atleast 5-6 times a day, OWA health set is unhealthy, I have done all the steps mentioned in this web link. Authentication type for OWA Virtual directory is integrated windows and Basic.
    I have 2 CAS servers, and this alert generated from both of them.
    http://technet.microsoft.com/en-us/library/ms.exch.scom.OWA(EXCHG.150).aspx?v=15.0.712.24
    Alert: Health Set unhealthy
    Source: EX-CAS - OWA
    Path: EX-CAS;EX-CAS
    Last modified by: System
    Last modified time: 1/5/2014 8:15:08 PM
    Alert description: Outlook Web Access logon is failing on ClientAccess server EX-CAS.
    Availability has dropped to 0%. You can find protocol level traces for the failures on C:\Program Files\Microsoft\Exchange Server\V15\Logging\Monitoring\OWA\ClientAccessProbe.
    Incident start time: 1/6/2014 4:05:08 AM
    Last failed result:
    Failing Component - Owa
    Failure Reason - CafeFailure
    Exception:
    System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
    Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
    Failure source: Owa
    Failure reason: CafeFailure
    Failing component:Owa
    Exception hint: CafeErrorPage: CafeFailure Unauthorized Inner exception: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
    ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
    Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
    WebExceptionStatus: Success
    GET https://localhost/owa/ HTTP/1.1
    User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
    Accept: */*
    Cache-Control: no-cache
    X-OWA-ActionName: Monitoring
    Cookie:
    HTTP/1.1 401 Unauthorized
    request-id: 211474d2-a43e-4fab-8038-3aab35353568
    X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
    Server: Microsoft-IIS/7.5
    WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
    X-Powered-By: ASP.NET
    X-FEServer: EX-CAS
    Date: Mon, 06 Jan 2014 04:14:47 GMT
    Content-Length: 0
    Response time: 0s
     ---> Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
    ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
    Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
    WebExceptionStatus: Success
    GET https://localhost/owa/ HTTP/1.1
    User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
    Accept: */*
    Cache-Control: no-cache
    X-OWA-ActionName: Monitoring
    Cookie:
    HTTP/1.1 401 Unauthorized
    request-id: 211474d2-a43e-4fab-8038-3aab35353568
    X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
    Server: Microsoft-IIS/7.5
    WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
    X-Powered-By: ASP.NET
    X-FEServer: EX-CAS
    Date: Mon, 06 Jan 2014 04:14:47 GMT
    Content-Length: 0
    Response time: 0s
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Net.MonitoringWebClient.BaseExceptionAnalyzer.Analyze(TestId currentTestStep, HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, Action`1 trackingDelegate)
       at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.AnalyzeResponse[T](HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
       at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndSend[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse, Boolean fireResponseReceivedEvent)
       at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndGet[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
       at Microsoft.Exchange.Net.MonitoringWebClient.Authenticate.AuthenticationResponseReceived(IAsyncResult result)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
       at Microsoft.Exchange.Net.MonitoringWebClient.Owa.OwaLogin.AuthenticationCompleted(IAsyncResult result)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
       at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Bool
    States of all monitors within the health set:
    Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'EX-CAS' -HealthSet 'OWA'
    State              
    Name                                   
    TargetResource                     HealthSet                    
    AlertValue     ServerComponent    
    NotApplicable       OwaCtpMonitor                                                             
    OWA                          
    Unhealthy      None               
    States of all health sets:
    Note: Data may be stale. To get current data, run: Get-HealthReport -Identity 'EX-CAS'
    State              
    HealthSet                    
    AlertValue     LastTransitionTime      
    MonitorCount       
    NotApplicable       ActiveSync                   
    Healthy        1/3/2014 5:21:13 AM     
    2                  
    NotApplicable       AD                           
    Healthy        11/24/2013 6:54:18 AM  
     10                 
    NotApplicable       ECP                          
    Healthy        1/5/2014 3:03:05 AM     
    1                  
    Online             
    Autodiscover.Proxy           
    Healthy        11/20/2013 10:06:37 AM  
    1                  
    NotApplicable       Autodiscover                 
    Healthy        1/3/2014 10:18:17 PM    
    2                  
    Online             
    ActiveSync.Proxy             
    Healthy        11/20/2013 10:06:37 AM  
    1                  
    Online             
    ECP.Proxy                
        Healthy       
    11/21/2013 6:16:08 PM    4                  
    Online             
    EWS.Proxy                    
    Healthy        11/20/2013 10:06:37 AM  
    1                  
    Online             
    OutlookMapi.Proxy            
    Healthy        11/24/2013 6:54:28 AM   
    4                  
    Online             
    OAB.Proxy                    
    Healthy        11/19/2013 7:14:34 PM   
    1                  
    Online             
    OWA.Proxy                    
    Healthy        11/20/2013 10:06:37 AM  
    2                  
    NotApplicable       EDS                          
    Healthy        1/3/2014 5:19:56 AM     
    10                 
    Online             
    RPS.Proxy                    
    Healthy        1/3/2014 5:21:27 AM     
    13                 
    Online             
    RWS.Proxy                     Healthy       
    1/3/2014 5:20:09 AM      10                 
    Online             
    Outlook.Proxy                
    Healthy        1/3/2014 5:21:12 AM     
    4                  
    NotApplicable       EWS                          
    Healthy        1/3/2014 10:18:17 PM    
    2                  
    Online             
    FrontendTransport            
    Healthy        1/5/2014 3:47:09 AM     
    11                 
    Online             
    HubTransport                 
    Healthy        1/5/2014 3:47:09 AM     
    29            
    NotApplicable       Monitoring                   
    Unhealthy      1/5/2014 4:05:57 AM     
    9                  
    NotApplicable       DataProtection               
    Healthy        1/3/2014 5:25:42 AM     
    1                  
    NotApplicable       Network                       Healthy       
    1/4/2014 1:51:16 PM      1                  
    NotApplicable       OWA                          
    Unhealthy      1/5/2014 8:05:08 PM     
    1                  
    NotApplicable       FIPS                         
    Healthy        1/3/2014 5:21:12 AM     
    3                  
    Online             
    Transport                    
    Healthy        1/5/2014 4:11:00 AM     
    9                  
    NotApplicable       RPS                          
    Healthy        11/20/2013 10:07:12 AM  
    2                   
    NotApplicable       Compliance                   
    Healthy        11/20/2013 10:08:10 AM  
    2                  
    NotApplicable       Outlook                      
    Healthy        11/21/2013 6:12:54 PM   
    2                  
    Online             
    UM.CallRouter                
    Healthy        1/5/2014 3:47:10 AM     
    7                  
    NotApplicable       UserThrottling               
    Healthy        1/5/2014 4:16:42 AM     
    7                  
    NotApplicable       Search       
                    Healthy       
    11/24/2013 6:55:06 AM    9                  
    NotApplicable       AntiSpam                     
    Healthy        1/3/2014 5:16:43 AM     
    3                  
    NotApplicable       Security                     
    Healthy        1/3/2014 5:19:28 AM     
    3                  
    NotApplicable       IMAP.Protocol                
    Healthy        1/3/2014 5:21:14 AM     
    3                  
    NotApplicable       Datamining                   
    Healthy        1/3/2014 5:18:34 AM     
    3          
    NotApplicable       Provisioning                 
    Healthy        1/3/2014 5:19:56 AM     
    3                  
    NotApplicable       POP.Protocol                 
    Healthy        1/3/2014 5:20:44 AM     
    3                  
    NotApplicable       Outlook.Protocol             
    Healthy        1/3/2014 5:19:46 AM     
    3                  
    NotApplicable       ProcessIsolation             
    Healthy        1/3/2014 5:19:26 AM     
    9                  
    NotApplicable       Store                        
    Healthy        1/3/2014 5:20:38 AM     
    6                  
    NotApplicable       TransportSync                
    Healthy        11/24/2013 6:53:09 AM   
    3                  
    NotApplicable       MailboxTransport             
    Healthy        1/3/2014 5:21:11 AM     
    6                   
    NotApplicable       EventAssistants              
    Healthy        11/21/2013 6:22:01 PM   
    2                  
    NotApplicable       MRS                          
    Healthy        1/3/2014 5:20:29 AM     
    3                  
    NotApplicable       MessageTracing               
    Healthy        1/3/2014 5:18:15 AM     
    3                  
    NotApplicable       CentralAdmin                 
    Healthy        1/3/2014 5:17:25 AM     
    3                  
    NotApplicable       UM.Protocol                  
    Healthy        1/3/2014 5:17:08 AM     
    3                  
    NotApplicable       Autodiscover.Protocol        
    Healthy        1/3/2014 5:17:13 AM     
    3                  
    NotApplicable       OAB                          
    Healthy        1/3/2014 5:20:51 AM     
    3                  
    NotApplicable       OWA.Protocol                 
    Healthy        1/3/2014 5:20:52 AM     
    3                  
    NotApplicable       Calendaring                  
    Healthy        11/24/2013 6:56:59 AM   
    3                  
    NotApplicable       PushNotifications.Protocol   
    Healthy        11/21/2013 6:16:05 PM   
    3                  
    NotApplicable       EWS.Protocol                 
    Healthy        1/3/2014 5:19:07 AM     
    3                  
    NotApplicable       ActiveSync.Protocol 
             Healthy       
    1/3/2014 5:20:16 AM      3                  
    NotApplicable       RemoteMonitoring             
    Healthy        1/5/2014 3:47:09 AM     
    3
    Any solution for this alert, how to rectify it, but OWA is running perfect for all users.           

    Hi,
    Sorry for the late reply.
    Do we have Exchange 2010 coexistence?
    If it is the case, I know the following known issue:
    Release Notes for Exchange 2013
    http://technet.microsoft.com/en-us/library/jj150489%28v=exchg.150%29.aspx
    Please note the "Exchange 2010 coexistence" session.
    If it is not related to our problem, please check the IIS log.
    If there is any detailed error code, like 401.1, 401.2, please let me know.
    Hope it is helpful
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Exchange 2013 CU2 will not install, Exchange is now in an unuseable state.

    I have downloaded Exchange 2013 CU2 and attempted to install it from a local drive.  Exchange 2013 is installed on a Server 2012 Standard VM in Hyper-V.  I ran the two following commands before trying to install
    setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
    Upon trying to run the installer, I recieve the following error.
    Error:
    The following error was generated when "$error.Clear();
                        & $RoleBinPath\ServiceControl.ps1 EnableServices Critical
                    " was run: "AuthorizationManager check failed.".
    During my first install attept, the error was on step 4 of 15. I have tried to rerun the setup with no luck.  I noticed the installer leaves all the Exchange services disabled, as well as winmgmt, remoteregistry, w3svc, iisadmin.  These four services
    are the critical services the errors refer to.  I have verified my execution policy is correct
    PS C:\Windows\system32> Get-ExecutionPolicy -list
    Scope                                            
    ExecutionPolicy
    MachinePolicy                                               
    Unrestricted
    UserPolicy                                                  
    Undefined
    Process                                                  
    Undefined
    CurrentUser                                                  
    Undefined
    LocalMachine                                               
    RemoteSigned
    Upon trying to rerun the setup, I have ran the following commands in order to start the critical services manually
    Get-Service-name
    winmgmt,
    remoteregistry,
    w3svc,
    iisadmin
    |
    set-service -startuptype
    automatic
    Get-Service-name
    winmgmt,
    remoteregistry,
    w3svc,
    iisadmin
    |
    Start-Service
    No matter what I do, the Exchange 2013 CU2 installer seems to fail.  I'd appreciate any possible help with this.
    Thanks,
    Chris
    To add to what I posted, I also have the following error in the event log.
    [07/22/2013 13:57:01.0279] [1] Executing:
                        & $RoleBinPath\ServiceControl.ps1 EnableServices Critical
    [07/22/2013 13:57:01.0373] [1] The following 1 error(s) occurred during task execution:
    [07/22/2013 13:57:01.0373] [1] 0.  ErrorRecord: AuthorizationManager check failed.
    [07/22/2013
    13:57:01.0373] [1] 0.  ErrorRecord:
    System.Management.Automation.PSSecurityException: AuthorizationManager
    check failed. ---> System.Runtime.InteropServices.COMException: The
    service cannot be started, either because it is disabled or because it
    has no enabled devices associated with it. (Exception from HRESULT:
    0x80070422)
       at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at System.Management.ManagementScope.InitializeGuts(Object o)
       at System.Management.ManagementScope.Initialize()
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementObject.Get()
       at System.Management.Automation.PsUtils.GetParentProcess(Process current)
       at System.Management.Automation.SecuritySupport.GetExecutionPolicy(String shellId, ExecutionPolicyScope scope)
       at System.Management.Automation.SecuritySupport.GetExecutionPolicy(String shellId)
       at Microsoft.PowerShell.PSAuthorizationManager.CheckPolicy(ExternalScriptInfo script, PSHost host, Exception& reason)
    at Microsoft.PowerShell.PSAuthorizationManager.ShouldRun(CommandInfo
    commandInfo, CommandOrigin origin, PSHost host, Exception& reason)
    at
    System.Management.Automation.AuthorizationManager.ShouldRunInternal(CommandInfo
    commandInfo, CommandOrigin origin, PSHost host)
       --- End of inner exception stack trace ---
    at
    System.Management.Automation.AuthorizationManager.ShouldRunInternal(CommandInfo
    commandInfo, CommandOrigin origin, PSHost host)
       at
    System.Management.Automation.CommandDiscovery.ShouldRun(ExecutionContext
    context, PSHost host, CommandInfo commandInfo, CommandOrigin
    commandOrigin)
       at
    System.Management.Automation.CommandDiscovery.LookupCommandProcessor(CommandInfo
    commandInfo, CommandOrigin commandOrigin, Nullable`1 useLocalScope,
    SessionStateInternal sessionState)
       at
    System.Management.Automation.CommandDiscovery.LookupCommandProcessor(String
    commandName, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
       at System.Management.Automation.ExecutionContext.CreateCommand(String command, Boolean dotSource)
    at
    System.Management.Automation.PipelineOps.AddCommand(PipelineProcessor
    pipe, CommandParameterInternal[] commandElements, CommandBaseAst
    commandBaseAst, CommandRedirection[] redirections, ExecutionContext
    context)
       at
    System.Management.Automation.PipelineOps.InvokePipeline(Object input,
    Boolean ignoreInput, CommandParameterInternal[][] pipeElements,
    CommandBaseAst[] pipeElementAsts, CommandRedirection[][]
    commandRedirections, FunctionContext funcContext)
       at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
       at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
    [07/22/2013 13:57:01.0373] [1] [ERROR] The following error was generated when "$error.Clear();
                        & $RoleBinPath\ServiceControl.ps1 EnableServices Critical
                    " was run: "AuthorizationManager check failed.".
    [07/22/2013 13:57:01.0373] [1] [ERROR] AuthorizationManager check failed.
    [07/22/2013
    13:57:01.0373] [1] [ERROR] The service cannot be started, either
    because it is disabled or because it has no enabled devices associated
    with it. (Exception from HRESULT: 0x80070422)
    [07/22/2013
    13:57:01.0388] [1] [ERROR-REFERENCE]
    Id=AllRolesMidFileCopyComponent___af0f15afe35c4e7cba121e546f405214
    Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [07/22/2013 13:57:01.0388] [1] Setup is stopping now because of one or more critical errors.
    [07/22/2013 13:57:01.0388] [1] Finished executing component tasks.
    [07/22/2013 13:57:01.0435] [1] Ending processing Start-MidFileCopy
    [07/22/2013 13:58:09.0121] [0] End of Setup
    [07/22/2013 13:58:09.0121] [0] **********************************************
    I also have these two errors in event viewer that keep occuring. 
    Event 2280, IIS-W3SVC-WP
    The Module DLL C:\Program Files\Microsoft\Exchange Server\V15\Bin\kerbauth.dll failed to load.  The data is the error.
    Event 2300, IIS-W3SVC-WP
    The
    worker process cannot access the CLR configuration file at 'C:\Program
    Files\Microsoft\Exchange
    Server\V15\bin\GenericAppPoolConfigWithGCServerEnabledFalse.config'. 
    Verify that the file exists and that the worker process has read access
    to the file.

    I kept quickly running the following two commands while the install was happening
    Get-Service-name
    winmgmt,
    remoteregistry,
    w3svc,
    iisadmin
    |
    set-service -startuptype
    automatic
    Get-Service-name
    winmgmt,
    remoteregistry,
    w3svc,
    iisadmin
    |
    Start-Service
    This caused the install to succeed. 

  • Outlook 2010 SP2 - Error when editing shared calendar: Post Exchange 2013 CU2 Migration

    Hi there,
    I have a strange comportment with Outlook 2010 SP2 and Exchange 2013 CU2 and i really need your help.
    Frequently, when an user (who has the good permissions for) want to edit a shared calendar (edit a meeting or add one), he has this error message: 
    " Cannot display the folder. Your server administrator has limited the number of items you can open simultaneously. Try closing message you have opened or removing attachments and images from unsent messages you are composing "
    I see anything in the Exchange server event log but i have each time, an error message in the client event log:
    " Microsoft Office14 Alerts ID 300"
    Everything work very well with Outlook 2013.
    Many thanks in advance for your assistance, and I am looking forward to reading from you.

    Hi,
    According to your description, the issue is related to your Office 2010 client.
    And the issue can be resolved by installing the Microsoft Office 2010 Deployment Kit.
    Here are the steps you can refer to :
    1. Open a command prompt with administrative permissions.
    2. Browse to the directory that contains the Offvirt.msi.
    3. At the command prompt, run the following command:
    msiexec /i OffVirt.msi [licensing flags]
    You must enter a correct licensing flag in the following list to correctly configure the Deployment Kit. Otherwise, functionality may be incorrect.
    For more information, you can refer to the following article:
    http://blogs.technet.com/b/virtualworld/archive/2010/07/07/microsoft-has-encountered-an-error-with-licensing-and-will-need-to-close.aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • Mails were deleted automatically from inbox and sent items, even in deleted items in Exchange 2013 CU2

    Dear all:
    I encountered a problem and needs to be solved.
    We runs Exchange 2013 CU2, and some users told me that their mails in sent items and inbox were automatically delivered into "deleted items", especially in last two weeks or yesterday.
    The users said they cannot delete so many mails at one time. And now I found one user's mails in "deleted items" were also deleted this morning.
    I don't know whether it was bug or not in exchange 2013 cu2, and how to solve this problem? Thanks for any help.
    koiso 
    Technet Microsoft

    Hi koiso,
    Are there any commons among problematic users or deleted emails? For example,
    they are on the same database
    they have delegate settings
    they are using mobile phone to sync emails
    At the same time, I'd recommend you enable Mailbox Audit Log for the problematic users. For your reference:
    http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Exchange 2013 CU2 to CU3 upgrade error

    I'm getting this error when running an Exchange 2013 CU2 to CU3 upgrade. Please help!
    Error:
    The following error was generated when "$error.Clear(); 
              $keyPath = "HKLM:\Software\Microsoft\WebManagement\Server";
              if (!(Get-Item $keyPath -ErrorAction SilentlyContinue))
                New-Item $keyPath -Force
              Set-ItemProperty -path $keyPath -name "EnableRemoteManagement" -value 0x1 -Type DWORD -Force;
              if (Get-Service WMSVC* | ?{$_.Name -eq 'WMSVC'})
                Set-Service WMSVC -StartupType Automatic
                Stop-SetupService -ServiceName WMSVC;
                Start-SetupService -ServiceName WMSVC
            " was run: "Service 'WMSVC' failed to reach status 'Running' on this server.".

              if (Get-Service WMSVC* | ?{$_.Name -eq 'WMSVC'})
                Set-Service WMSVC -StartupType Automatic
                Stop-SetupService -ServiceName WMSVC;
                Start-SetupService -ServiceName WMSVC
            " was run: "Service 'WMSVC' failed to reach status 'Running' on this server.".
    Is the certificate for Web Management Service (WMSvc) missing?
    If so, then you need to create a new one and assign it to the feature "Management Service" in IIS.
    Martina Miskovic

  • Exchange 2013 CU2 OWA Redirection not working

    Hi,
    I installed Exchange 2013 RTM in existing environment with Exchange 2010 Sp3 in our test environment.  After installing Exchange 2013 RTM I checked when I access OWA using Internal URl it redirected to Exchange 2010 CAS server's Internal URL and I was
    able to access Exchange 2010 mailbox.
    I upgraded to CU2 and now Exchange 2013 internal URl not re-directing it to Exchange 2010 mailbox anymore. I checked all the settings on virtual directories and made sure that FBA authentication is selected.  It is a test environment and I just wanted
    to test the re-direction in co-existence environment using Internal URL. It should work out of the box but not sure what happened.  There was no issue in CU2 instllation.
    Exchange 2013 CAS and mailbox roles are on separate servers.  Same with Exchange 2010.  There is no certificate 3rd party certificate install on CAS servers since it is a test environment.
    Not sure what else can I check.
    I appreciate if any help I can get.
    Thanks,
    Regards
    Raman
    Raman

    I have been seeing issue where 2013 OWA was not re-directing to Exchange 2013, as mentioned on top of this thread.  After spending days over it.
    Finally it resolved for me after doing the following: -
    Go to CAS 2010 IIS
    OWA directory -> Authentication -> Windows Authentication -> Add provider
    Negotiate and NTLM.
    Although, now when I click on "Options" once OWA is redirected to 2010.  ECP does
    not work.  It just open up ECP page but no link works not even sign out.  I had to click back on the browser's back button go get back to main OWA mail page.
    OWA and ECP directory settings are same.  I have checked several times.
    Thanks,
    Raman

  • Error Installing Step 10 of 12 Mailbox roles: Mailbox service on Exchange 2013 CU2

    Step 10 of 12 Mailbox roles: Mailbox service
    Error:
    The following error was generated when "$error.Clear();
              if (!$RoleIsDatacenter -and !$RoleIsDatacenterDedicated)
                $createNewOab = $false;
                $oabName = $null;
                $oabAddressList = $null;
                $oabVdirs = $null;
                $oabGlobalWebDistribution = $false;
                $oabConfiguredAttributes = $null;
                Write-ExchangeSetupLog -Info ("Looking for an existing default OAB");
                $defaultOab = Get-OfflineAddressBook -DomainController:$RoleDomainController | where {$_.IsDefault};
                if ($defaultOab -ne $null)
                  Write-ExchangeSetupLog -Info ("Found a default OAB: " + $defaultOab.Name + ";
    checking its version");
                  if ($defaultOab.ExchangeVersion.CompareTo([Microsoft.Exchange.Data.ExchangeObjectVersion]::Exchange2012)
    -lt 0)
                    $e15Oab = Get-OfflineAddressBook -DomainController:$RoleDomainController | where {$_.ExchangeVersion.CompareTo([Microsoft.Exchange.Data.ExchangeObjectVersion]::Exchange2012)
    -eq 0};
                    if ($e15Oab -eq $null)
                      Write-ExchangeSetupLog -Info ("Existing OAB is Exchange 2010 or older;
    will create a new OAB");
                      $createNewOab = $true;
                      $oabName = $defaultOab.Name + " (Ex2013)";
                      $oabAddressList = $defaultOab.AddressLists;
                      $oabGlobalWebDistribution = $defaultOab.GlobalWebDistributionEnabled;
                      $oabConfiguredAttributes = $defaultOab.ConfiguredAttributes;
                    else
                      Write-ExchangeSetupLog -Info ("Already has an existing Exchange 2013
    OAB:" + $e15Oab.Name + "; will not create a new OAB");
                  else
                    Write-ExchangeSetupLog -Info ("Existing OAB is Exchange 2013 or newer; will not
    create a new OAB");
                else
                  Write-ExchangeSetupLog -Info ("Did not find a default OAB; will create one");
                  $createNewOab = $true;
                  $oabName = [Microsoft.Exchange.Data.Directory.SystemConfiguration.OfflineAddressBook]::DefaultName;
                  $nonDefaultOabWithDefaultName = Get-OfflineAddressBook $oabName -DomainController:$RoleDomainController
    -ErrorAction SilentlyContinue | where {$_.IsDefault -eq $false};
                  if ($nonDefaultOabWithDefaultName -ne $null)
                    $createNewOab = $false;
                    Write-ExchangeSetupLog -Warning `
                      ("Offline address book " + `
                      $nonDefaultOabWithDefaultName.Name + `
                      " already exists: " + `
                      $nonDefaultOabWithDefaultName.DistinguishedName + `
                      ". Use administrative tools to change it to default OAB.");
                  $allGals = @(Get-GlobalAddressList -DomainController:$RoleDomainController | where {$_.IsDefaultGlobalAddressList});
                  if ($allGals -eq $null -or $allGals.Count -eq 0)
                    $createNewOab = $false;
                    Write-ExchangeSetupLog -Warning `
                      ("Couldn't find the default global address list. The default offline
    address book can't be created.");
                  elseif ($allGals.Count -gt 1)
                    $createNewOab = $false;
                    Write-ExchangeSetupLog -Warning `
                      ("Found " + $allGals.Count + " default global address
    lists. You can have only one default global address list in your organization. The default offline address book will not be created.");
                  else
                    $oabAddressList = $allGals[0];
                    Write-ExchangeSetupLog -Info ("OAB will be based on default GAL: " + $oabAddressList.Name);
                if ($createNewOab)
                  if ($oabGlobalWebDistribution -eq $false)
                    $currentAdSiteDn = (Get-ExchangeServer $RoleFqdnOrName -DomainController:$RoleDomainController).Site.DistinguishedName;
                    $allOabVdirs = @(Get-OabVirtualDirectory -DomainController:$RoleDomainController);
                    $e15MinimumServerVersion = New-Object Microsoft.Exchange.Data.ServerVersion([Microsoft.Exchange.Data.Directory.SystemConfiguration.Server]::E15MinVersion);
                    if ($allOabVdirs -ne $null -and $allOabVdirs.Count -gt 0)
                      foreach ($oabVdir in $allOabVdirs)
                        if ([Microsoft.Exchange.Data.ServerVersion]::Compare($oabVdir.AdminDisplayVersion,
    $e15MinimumServerVersion) -gt 0)
                          $oabVdirSiteDn = (Get-ExchangeServer $oabVdir.Server
    -DomainController:$RoleDomainController).Site.DistinguishedName;
                          if ($oabVdirSiteDn -eq $currentAdSiteDn)
                            $oabVdirs = $oabVdir;
                            break;
                          elseif ($oabVdirs -eq $null)
                            $oabVdirs = $oabVdir;
                    if ($oabVdirs -ne $null)
                      Write-ExchangeSetupLog -Info ("OAB will be distributed to OAB virtual
    directory " + $oabVdirs.Name);
                    else
                      Write-ExchangeSetupLog -Info ("Could not find any OAB virtual directories;
    OAB will be configured without distribution.");
                  try
                    Write-ExchangeSetupLog -Info ("Creating new default OAB.");
                    $newOab = New-OfflineAddressBook `
                      -Name $oabName `
                      -AddressLists $oabAddressList `
                      -VirtualDirectories $oabVdirs `
                      -GlobalWebDistributionEnabled $oabGlobalWebDistribution `
                      -IsDefault $true `
                      -DomainController:$RoleDomainController;
                  catch [Microsoft.Exchange.Data.Directory.ADObjectAlreadyExistsException]
                    Write-ExchangeSetupLog -Warning ("Tried to create new default OAB but the object
    already exists; it may have been created by another instance of setup.");
                  if ($oabConfiguredAttributes -ne $null)
                    Write-ExchangeSetupLog -Info ("Setting OAB ConfiguredAttributes to: " +
    $oabConfiguredAttributes);
                    Set-OfflineAddressBook $newOab -ConfiguredAttributes $oabConfiguredAttributes -DomainController:$RoleDomainController;
            " was run: "Cannot find an overload for "CompareTo" and the argument count: "1".".

    so we're having the same issue. Installing Exchange 2013 across 2 sites in a coexistence 2007/2010 environment. Everything on one site (3x Exchange servers) installed perfectly, but only 1x Exchange servers on other site installed. Remaining 2x Exchange
    servers gave the same error that Harry had. Any ideas? I checked OAB and all mailboxes had a default OAB assigned already. looked through the logs and found this in case it helps:
    [02/13/2015 22:37:31.0105] [2] Found a default OAB: Default Offline Address List (Ex2013) Default Offline Address List (Ex2013)
    CNF:608015af-50a4-450a-0000-91fada1a9af9; checking its version
    [02/13/2015 22:37:31.0120] [2] Ending processing Write-ExchangeSetupLog
    [02/13/2015 22:37:31.0151] [1] The following 1 error(s) occurred during task execution:
    [02/13/2015 22:37:31.0151] [1] 0.  ErrorRecord: Cannot find an overload for "CompareTo" and the argument count: "1".
    [02/13/2015 22:37:31.0151] [1] 0.  ErrorRecord: System.Management.Automation.MethodException: Cannot find an overload for "CompareTo" and the argument count: "1".
       at CallSite.Target(Closure , CallSite , Object , Object )
       at System.Dynamic.UpdateDelegates.UpdateAndExecute2[T0,T1,TRet](CallSite site, T0 arg0, T1 arg1)
       at System.Management.Automation.Interpreter.DynamicInstruction`3.Run(InterpretedFrame frame)
       at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
    [02/13/2015 22:37:31.0151] [1] [ERROR] The following error was generated when "$error.Clear(); 
              if (!$RoleIsDatacenter -and !$RoleIsDatacenterDedicated)
                $createNewOab = $false;
                $oabName = $null;
                $oabAddressList = $null;
                $oabVdirs = $null;
                $oabGlobalWebDistribution = $false;
                $oabConfiguredAttributes = $null;
                Write-ExchangeSetupLog -Info ("Looking for an existing default OAB");
                $defaultOab = Get-OfflineAddressBook -DomainController:$RoleDomainController | where {$_.IsDefault};
                if ($defaultOab -ne $null)
                  Write-ExchangeSetupLog -Info ("Found a default OAB: " + $defaultOab.Name + "; checking its version");
                  if ($defaultOab.ExchangeVersion.CompareTo([Microsoft.Exchange.Data.ExchangeObjectVersion]::Exchange2012) -lt 0)
                    $e15Oab = Get-OfflineAddressBook -DomainController:$RoleDomainController | where {$_.ExchangeVersion.CompareTo([Microsoft.Exchange.Data.ExchangeObjectVersion]::Exchange2012) -eq 0};
                    if ($e15Oab -eq $null)
                      Write-ExchangeSetupLog -Info ("Existing OAB is Exchange 2010 or older; will create a new OAB");
                      $createNewOab = $true;
                      $oabName = $defaultOab.Name + " (Ex2013)";
                      $oabAddressList = $defaultOab.AddressLists;
                      $oabGlobalWebDistribution = $defaultOab.GlobalWebDistributionEnabled;
                      $oabConfiguredAttributes = $defaultOab.ConfiguredAttributes;
                    else
                      Write-ExchangeSetupLog -Info ("Already has an existing Exchange 2013 OAB:" + $e15Oab.Name + "; will not create a new OAB");
                  else
                    Write-ExchangeSetupLog -Info ("Existing OAB is Exchange 2013 or newer; will not create a new OAB");
                else
                  Write-ExchangeSetupLog -Info ("Did not find a default OAB; will create one");
                  $createNewOab = $true;
                  $oabName = [Microsoft.Exchange.Data.Directory.SystemConfiguration.OfflineAddressBook]::DefaultName;
                  $nonDefaultOabWithDefaultName = Get-OfflineAddressBook $oabName -DomainController:$RoleDomainController -ErrorAction SilentlyContinue | where {$_.IsDefault -eq $false};
                  if ($nonDefaultOabWithDefaultName -ne $null)
                    $createNewOab = $false;
                    Write-ExchangeSetupLog -Warning `
                      ("Offline address book " + `
                      $nonDefaultOabWithDefaultName.Name + `
                      " already exists: " + `
                      $nonDefaultOabWithDefaultName.DistinguishedName + `
                      ". Use administrative tools to change it to default OAB.");
                  $allGals = @(Get-GlobalAddressList -DomainController:$RoleDomainController | where {$_.IsDefaultGlobalAddressList});
                  if ($allGals -eq $null -or $allGals.Count -eq 0)
                    $createNewOab = $false;
                    Write-ExchangeSetupLog -Warning `
                      ("Couldn't find the default global address list. The default offline address book can't be created.");
                  elseif ($allGals.Count -gt 1)
                    $createNewOab = $false;
                    Write-ExchangeSetupLog -Warning `
                      ("Found " + $allGals.Count + " default global address lists. You can have only one default global address list in your organization. The default offline address book will
    not be created.");
                  else
                    $oabAddressList = $allGals[0];
                    Write-ExchangeSetupLog -Info ("OAB will be based on default GAL: " + $oabAddressList.Name);
                if ($createNewOab)
                  if ($oabGlobalWebDistribution -eq $false)
                    $currentAdSiteDn = (Get-ExchangeServer $RoleFqdnOrName -DomainController:$RoleDomainController).Site.DistinguishedName;
                    $allOabVdirs = @(Get-OabVirtualDirectory -ADPropertiesOnly -DomainController:$RoleDomainController);
                    $e15MinimumServerVersion = New-Object Microsoft.Exchange.Data.ServerVersion([Microsoft.Exchange.Data.Directory.SystemConfiguration.Server]::E15MinVersion);
                    if ($allOabVdirs -ne $null -and $allOabVdirs.Count -gt 0)
                      foreach ($oabVdir in $allOabVdirs)
                        if ([Microsoft.Exchange.Data.ServerVersion]::Compare($oabVdir.AdminDisplayVersion, $e15MinimumServerVersion) -gt 0)
                          $oabVdirSiteDn = (Get-ExchangeServer $oabVdir.Server -DomainController:$RoleDomainController).Site.DistinguishedName;
                          if ($oabVdirSiteDn -eq $currentAdSiteDn)
                            $oabVdirs = $oabVdir;
                            break;
                          elseif ($oabVdirs -eq $null)
                            $oabVdirs = $oabVdir;
                    if ($oabVdirs -ne $null)
                      Write-ExchangeSetupLog -Info ("OAB will be distributed to OAB virtual directory " + $oabVdirs.Name);
                    else
                      Write-ExchangeSetupLog -Info ("Could not find any OAB virtual directories; OAB will be configured without distribution.");
                  try
                    Write-ExchangeSetupLog -Info ("Creating new default OAB.");
                    $newOab = New-OfflineAddressBook `
                      -Name $oabName `
                      -AddressLists $oabAddressList `
                      -VirtualDirectories $oabVdirs `
                      -GlobalWebDistributionEnabled $oabGlobalWebDistribution `
                      -IsDefault $true `
                      -DomainController:$RoleDomainController;
                  catch [Microsoft.Exchange.Data.Directory.ADObjectAlreadyExistsException]
                    Write-ExchangeSetupLog -Warning ("Tried to create new default OAB but the object already exists; it may have been created by another instance of setup.");
                  if ($oabConfiguredAttributes -ne $null)
                    Write-ExchangeSetupLog -Info ("Setting OAB ConfiguredAttributes to: " + $oabConfiguredAttributes);
                    Set-OfflineAddressBook $newOab -ConfiguredAttributes $oabConfiguredAttributes -DomainController:$RoleDomainController;
            " was run: "Cannot find an overload for "CompareTo" and the argument count: "1".".
    [02/13/2015 22:37:31.0151] [1] [ERROR] Cannot find an overload for "CompareTo" and the argument count: "1".
    [02/13/2015 22:37:31.0167] [1] [ERROR-REFERENCE] Id=SystemAttendantDependent___b06ea38070354e2c9f0000c2b971306a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [02/13/2015 22:37:31.0167] [1] Setup is stopping now because of one or more critical errors.
    [02/13/2015 22:37:31.0167] [1] Finished executing component tasks.
    [02/13/2015 22:37:31.0214] [1] Ending processing Install-MailboxRole

  • Update from Exchange 2013 Cu2 to SP1 - Outlook 2010 with SP2 clients disconnected

    Hi,
    we recently upgraded a standalone Exchange 2013 Server to SP1. Owa works fine, but all internal Outlook 2010 Clients (with SP2) get disconnected. Creating a new Profile, and testing the internal autodiscovery leeds to an Error 12030 (Connection reset) during
    the discovery process.
    I already checked the Service Point, the discovery URLs, even recreated the autodiscover virtual Directory in iis. But nothing changed.
    The self signed certificate, that was used before the update is further used, and well known to all Clients. As I tested, OWA is working well everywhere.
    Anyone some new ideas?
    Best regards
    Bernhard

    Hi,
    How did you recreate outlook profile? Manually or Automatic?
    If automatic failed, please try to recreate manually and check the result.
    If manual failed, please refer to the following methods to troubleshoot the issue:
    1>Try to open the following link and check the result:
     https://CASName/autodiscover/autodiscover.xml
    2>Try to use RCA to test outlook autodiscover and check the result.
    https://testconnectivity.microsoft.com/
    Thansk.
    Niko Cheng
    TechNet Community Support

  • Exchange 2013 CU2 Hab trasnport and Microsoft Filtering management Services did not start

    Did you were able to fix the issue I have the same problem after Access denied for Transport service and Microsoft Filtering Management Service with Error 0x8000405 unspecified error.

    Hi,
    From your description, I would like to verify if there is an event 2200 in Application log. If yes, please copy the ConfigurationServer.xml file from a normal Exchange server 2013 and add it to your Exchange server to check the result.
    If there is no event 2200, please take your time to post your error event for my further research.
    Here is a thread for your reference.
    Unable to start Microsoft Exchange Transport and Microsoft Filtering Management Service
    https://social.technet.microsoft.com/Forums/en-US/7473fa45-221d-4cfe-87d4-3dc697fc5c85/unable-to-start-microsoft-exchange-transport-and-microsoft-filtering-management-service-fms?forum=exchangesvrsecuremessaging
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2013 CU2/Exchange 2010 SP3 Coexistance OWA Redirection

    Hi, 
    I am trying to sign into OWA 2013 with a 2010 mailbox user and I just get the following page
    something went wrong
    Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.
    Want to be able to use your email when you're offline?
    Next time you are connected:
    1. At the top of Outlook Web App, next to your name, click Settings
    2. Click Offline settings and turn on offline access
    3. That's it! You'll never see this message again.
    I checked the logs and it looks like it might be trying to redirect to the Exchange 2010 Front end. 
    Exchangecas13 is the 2013 CAS server, Exchangefe1 is the 2010 CAS/Transport Server.  
    2013-07-26T20:42:01.691Z,8e66a7cb-63bc-4651-b769-d0062f7c7665,15,0,712,12,,,,,,,,,,,,,EXCHANGECAS13,,,,,,,,,,,,,,,,,,,,,,,,,,600050.0544,,,,,,,,,,,,,,,,,,S:ActivityStandardMetadata.Action=GlobalActivity;I32:ADR.C[SUPPR]=6;F:ADR.AL[SUPPR]=2.428583;I32:ADS.C[SUPPR]=1;F:ADS.AL[SUPPR]=2.1359,
    2013-07-26T20:42:18.433Z,17bed7ea-9bce-4759-bdd5-c8a25667f521,15,0,712,12,,Owa,exchangecas13,/owa/,,FBA,False,,,,Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C;
    .NET4.0E; MS-RTC EA 2; Media Center PC 6.0; InfoPath.3),192.168.1.30,EXCHANGECAS13,302,,,,,,,,,,,,0,,,,,,,,,,,,,2,,,,,,,,,,,,1,1,1,1,,,OnBeginRequest=0;NoCookies=302 - GET/E14AuthPost;,
    2013-07-26T20:42:18.438Z,41574515-5ea0-43b4-8a13-d327ec109d19,15,0,712,12,,Owa,exchangecas13,/owa/auth/logon.aspx,,FBA,False,,,,Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729;
    .NET4.0C; .NET4.0E; MS-RTC EA 2; Media Center PC 6.0; InfoPath.3),192.168.1.30,EXCHANGECAS13,200,,,,,,,,,,,,0,,,,0,,,,,,,,,1.9969,,,,,,,,,,,,1,1,1,1,?url=https%3a%2f%2fexchangecas13%2f&reason=0,,OnBeginRequest=0;,
    2013-07-26T20:42:18.464Z,02c9d811-e43d-4dab-a1eb-78a85b73f3e5,15,0,712,12,,Owa,exchangecas13,/owa/auth/logon.aspx,,FBA,False,,,,Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729;
    .NET4.0C; .NET4.0E; MS-RTC EA 2; Media Center PC 6.0; InfoPath.3),192.168.1.30,EXCHANGECAS13,200,,,,,,,,,,,,0,,,,0,,,,,,,,,2.0001,,,,,,,,,,,,1,1,1,1,?replaceCurrent=1&url=https%3a%2f%2fexchangecas13%2f,,OnBeginRequest=0;,
    2013-07-26T20:42:24.930Z,54e8f566-4c32-4fbe-9e84-d56bee916785,15,0,712,12,,Owa,exchangecas13,/owa/auth.owa,,FBA,True,LWGINC\pslager,,Sid~S-1-5-21-1186999560-1424097373-3473557-14162,Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2;
    .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC EA 2; Media Center PC 6.0; InfoPath.3),192.168.1.30,EXCHANGECAS13,302,,,POST,,,,,WindowsIdentity,,,,121,,,,1,17,,0,,0,,0,0,19.9095,0,,,,,,,,17,1,,18,18,19,19,,,OnBeginRequest=0;DownLevelTargetHash=0/0/1;ClientAccessServer=EXCHANGEFE1.LWGINC.com;ResolveCasLatency=0;,
    2013-07-26T20:42:24.937Z,f81832cf-43c4-49ed-942f-3ff1e951bd6a,15,0,712,12,,Owa,exchangecas13,/owa/auth.owa,,FBA,True,LWGINC\pslager,,Sid~S-1-5-21-1186999560-1424097373-3473557-14162,Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2;
    .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC EA 2; Media Center PC 6.0; InfoPath.3),192.168.1.30,EXCHANGECAS13,302,,,POST,,,,,WindowsIdentity,,,,121,,,,0,1,,0,,0,,0,0,2.9963,1,,,,,,,,1,0,,2,2,2,2,,,OnBeginRequest=0;DownLevelTargetHash=0/0/1;ClientAccessServer=EXCHANGEFE1.LWGINC.com;ResolveCasLatency=0;,
    Any ideas?

    Hi
    One try, please move administrator mailbox to 2013 server
    Cheers
    If you have any feedback on our support, please click
    here
    Zi Feng
    TechNet Community Support

  • Exchange 2013 CU2 - Mailbox Databases and Active Sync - update when new item arrive

    Hi,
    Maybe it will be a silly question but I don't know what exactly is going on. We are running Ex2013CU2 Evironment (1 CAS, 2 MBX Servers with 4 Mailbox Databases).
    User mailboxes are in MDB01 and they are allowed to connect to mail via activesync and everything is working great (I mean that auto notification on mobile when item arrive is working).
    When we move user mailbox to another database ex. MDB02 -> "auto notification when item arrive" does not working, but manual synchronization is working great.
    Does anyone have any idea why it is behaving like this or what should I check to fix this ?
    Thanks.
    -- Kamil Tatar

    are you saying PUSHMAIL is not working after moving the mailbox to a different database?
    Where Technology Meets Talent

  • Exchange 2013 SP1 & Custom OWA Theme

    On Friday of last week we updated from Exchange 2013 CU2 to Exchange 2013 SP1. Since updating our custom OWA theme no longer works. We configured it according to the following guide:
    http://technet.microsoft.com/en-us/library/bb201700(v=exchg.150).aspx
    The theme we customized was stored in the following location:
    \Client Access\OWA\version\Owa2\resources\themes\"title of our theme"
    Themes no longer appear to be stored in this location and I am uncertain as to where they have moved and how to apply them. Has anyone else run into this issue?

    Hi,
    Can we try to re-importing the theme again?
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Exchange 2013 upgrade from 2010 and no mail flow and cannot move mailboxes

    I am in the process of moving to Ex 2013 from 2010. I have installed Ex 2013 SP1 on a new server 2012 R2. All of my Ex 2010 servers are SP3 RU 5. Ex 2013 is running and I can connect through the EAC and see all other Exchange servers and connectors that
    were already in existence. Several puzzling things are happening now that the servers are in coexistence:
    1) As soon as Ex 2013 was installed on the network, many Outlook users are continuously being prompted to enter their domain credentials.  They can cancel the prompt and Outlook still sends/receives email.  No user mailboxes are on Ex 2013 yet. 
    Why is this happening?
    2) I am following the Ex 2013 Deployment Assistant and I get to the step to move the Ex 2010 Arbitration mailbox to Ex 2013 and the move does not happen--it just says "syncing" and never completes.  I tried moving a test mailbox from Ex 2010
    to the 2013 database and I get the same result.  I created the move request on the Ex2013 server and I see it as queued on the Ex2010 server, so I know they are "talking" to each other.  However, when reviewing the status of the move I
    see "MapiExceptionNoAccess: Unable to open message store".
    3) There seems to be no mail flow on the same Ex2013 server or between the Ex 2010 and 2013 servers.  I created two new test user mailboxes in Ex 2013.  The Ex2013 mailboxes cannot send/receive to each other or to Ex 2010 users.  This
    seems strange, unless I am completely missing something in the Ex 2013 install?
    I know this is a lot in one post, but following the Deployment assistant, I was hoping this would be something that others have faced.  Thanks for any input here.

    Does the below points already fit for you.
    Exchange 2013 Supported with the following minimum versions of Exchange:
    1) Exchange*** 2010 SP3 on all Exchange 2010 servers in the organization, including Edge Transport servers.
    2) Exchange 2013 CU2 or later on all Exchange 2013 servers in the organization.
    *** If you want to create an EdgeSync Subscription between an Exchange 2010 Hub Transport server and an Exchange 2013 SP1 Edge Transport
    server, you need to install Exchange 2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport server.
    Thanks Prem P Rana MCSA Messaging 2003 MCSE 2003 Server MCTS MCITP Exchange 2007, 2010 Gurgaon, India http://blogs.msexchange-experts.com

Maybe you are looking for

  • Report layout in the run time

    i have bilingual system i want to change the layout of report from right to left or opposite as my language for example : if my language = English layout = left to right if my language=Arabic layout = right to left during the run time thanks in advan

  • INF-200017 Unexpected error TERMINATED_WITH_ERROR

    Am having the above error message popping out each time i want to run a report. When i run the report from report builder, i dun face any problem as am able to generate the output. Please provide assistance. At the report server am getting error Term

  • Route in the order

    Hi friends When we create order, route should come automatically in the order (in shipping tab). If i enter manually, order accept. I have created new route, Reoue determinatin also. Thanks Dave

  • Nokia 1320 will not see sd card properly

    Please help, I have a nokia lumia 1320 and yesterday I tried to put a 64gb sd card into it. My phone can see it, but it won't allow me to do anything with the sd card. My phone is on windows 8.1, the sd card is micro sdxc card class 10 uhs-I Can anyo

  • OLAP BAPI - MDX Extension - SAP VARIABLES

    Hello, we use OLAP BAPI in oder to run queries angainst BW. Queries are written in MDX using the SAP VARIABLES extension to MDX. When using a variable for characteristic "0MATERIAL", the system returns an error stating that the specified value is not