Exchange 2013 CU6 OWA - FBA and Windows Authentication (coexistence)
Hi,
Is it possible to run FBA for outside clients and Windows Authentication for inside clients?
I have tried to setup FBA and WA on different WebSites without luck :-(
Best regards - NH
[Edit, typo]
Hi,
I recommend you create the second OWA/ECP virtual directories in a new IIS web site with a different IP address, and using it for internal client access.
You need to prepare the secondary IP address for CAS server, and then in the IIS manager, create a new Web Site. Create the second
OWA/ECP virtual directories in this new IIS Web Site.
You will also need to ensure that whatever name the internal use will be using to connect to the new
OWA/ECP site is present on the installed certificate and the name resolves to the correct IP address.
Then you can enable integrated windows authentication for internal users and enable forms-based authentication for external users.
Best regards,
Belinda Ma
TechNet Community Support
Similar Messages
-
FBA and Windows Authentication
In SharePoint 2013, if a user is accessing a SharePoint site from outside the local network: When they get to the site and chose an authentication method, Windows or FBA, can they chose the Windows authentication and enter their normal domain login? If
the user is on the domain network, when they chose Windows authentication it sees who they are on their computer and lets them get to the site. I am trying to understand how it works for that user if they aren't on the domain network.Hi kamikoz,
Per my knowledge, you need to configure FBA and allow external user to login into the application using the credentials that are given to them, you can refer to the blog:
Configuring SharePoint 2013 Forms-Based Authentication with SQLMemberShipProvider
More information about user authentication, please refer to the links:
http://technet.microsoft.com/en-us/library/cc262350(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj219571(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/ms457529(v=office.15).aspx
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
SharePoint Designer 2013 with SOAP DataSource and Windows Authentication
Hello
What do I need to do to create a SOAP Data Source in SharePoint Designer 2013 with Windows Authentication?
I am trying to display a list from another subsite in my Web Part Page using a DataView web part.
My environment is set up to use Claims with Kerberos.
Is there a guide available that talks about configuring this or troubleshooting this? What should I check?
Thanks for any suggestions.
YoshiHi,
According to your post, my understanding is that you wanted to create a SOAP Data Source in SharePoint Designer 2013.
Please refer to the official article related, although it is about the SharePoint Designer 2010, it still works for SharePoint Designer 2013.
http://office.microsoft.com/en-in/sharepoint-designer-help/add-a-soap-service-as-a-data-source-HA010355752.aspx
More information:
http://social.technet.microsoft.com/Forums/en-US/20e34a68-fa78-4450-9744-45f9e3ff26b5/sharepoint-designer-soap-and-rest-datasource-failure?forum=sharepointcustomizationprevious
http://sharepointdiva.wordpress.com/2012/03/19/create-cross-site-data-source/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in AdvanceHi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support -
Exchange 2013 CU6 event id 1003
Installed cu6, after that OWA and ECP stopped to work, with a redirection loop, when I check my eventlogs I see thousands of this error message:
RpcHttp] An internal server error occurred. The unhandled exception was: System.MissingMethodException: Method not found: 'System.String Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetSafeName(System.Security.Principal.IIdentity)'.
at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClasse.<OnEndRequest>b__d()
at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
Cant find a workaround, anyone else seen this error?Maybe this can help someone.
v
Replaced SharedWebConfig files under the location "V15\FrontEnd\HttpProxy"
v
Added the missing permission on Exchange Back End Web Site by comparing the same with our lab
v
On IIS
è Exchange Back End
è Changed Physical Path
è it to "V15\ClientAccess"
v
Still after which we couldn’t browse OWA under Exchange Back End using Port 444 but found that ECP works fine
v
Replaced the SharedWebConfig file from working Exchange 2013 CU6 under the location "V15\ClientAccess"
v
Ran IISReset
v
Confirmed that OWA and other virtual directories as well started working fine without any issues -
DC Restart when start installing Exchange 2013 CU6
I have a domain installed on windows server 2012 R2 with function level 2008 R2 and when i try to install "as a administrator" Update for exchange 2013 CU6 or CU5 DC restart and am facing this error :
Error:
The following error was generated when "$error.Clear();
install-CannedAddressLists -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Data.Directory.ADTransientException: Failed to reconnect to Active Directory server Make sure the server is available, and that you have used the correct credentials. ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryServerDownException:
Active Directory server is not available. Please retry at a later time.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnectionFromPool(ConnectionPoolType connectionPoolType, ADObjectId domain, String serverName, Int32 port, Boolean& serverConnectionPresentButDownOrDisconnected)
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, ADObjectId domain, String serverName, Int32 port, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, NetworkCredential networkCredential, String serverName, Int32 port)
at Microsoft.Exchange.Data.Directory.ADDataSession.GetConnection(String preferredServer, Boolean isWriteOperation, String optionalBaseDN, ADObjectId& rootId, ADScope scope)
at Microsoft.Exchange.Data.Directory.ADDataSession.GetWritableConnection(String preferredServer, ADObjectId identity, ADRawEntry scopeDeterimingObject)
I already prepare AD and Schema before start install
Please Advice ThanksHi Midoooz
Thank you for your question.
Do you install the Exchange Server on the DC?
From you posted error, I think you can try to make your exchange server in maintenance mode, then you can try install exchange CU6.
You can refer to the following link:
http://support2.microsoft.com/kb/2713696
Note:
Stop Maintenance Mode on the computer that is running Exchange Server after the Exchange Server 2013 CU6 upgrade is completed.
If there are any questions, please let me know.
Best Regard,
Jim -
Throttling policy not working on Exchange 2013 CU6
Hi,
We have a test throttling policy to restrict a mailbox to send at most 2 messages
per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
not fixing any related bugs.
We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
Throttling policy not working
smtp service restart
RPC Client Acces service restart
The policy details:
Get-ThrottlingPolicy low_rate_limit |fl *limit*
MessageRateLimit : 2
RecipientRateLimit : 1000
Get-mailbox [email protected] | fl ThrottlingPolicy
ThrottlingPolicy : low_rate_limit
Do you have any idea what is the problem?
Thank you in advance.
br,
ZoltanHi Zoltan,
Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
unlimited.
https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
Setup Error 1603 with Exchange 2013 incl. SP1 on Windows Server 2012 R2
Hello all,
i've started the installation of a new Exchange 2013 with SP1 in a Windows 2012 R2 environment. New AD, no Exchange previously installed. Exchange ISO from
Volume Licensing Service Center (Filename: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118.iso)
All the prerequisites are ok, installed also the “Unified Communications Managed API (UCMA) 4.0″ as requested.
Setup.exe i've started with "run as administrator" and all went well, until Step 11 of 15 (Mailbox role:Mailbox service).
Setup stopped and gives an error:
The following error was generated when "$error.Clear();
Install-MsiPackage `
-PackagePath ([System.IO.Path]::Combine($RoleLanguagePacksPath, "Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.nb-NO.msi")) `
-PropertyValues ("ARPSYSTEMCOMPONENT=1 ALLUSERS=1") `
-LogFile ([System.IO.Path]::Combine($RoleSetupLoggingPath, "InstallSpeech-nb-NO.msilog"))
" was run: "Installing product F:\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.nb-NO.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'The cabinet file 'EngineInstanceData.cab'
required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.'.".
Exchange ECP is not working (HTTP Error 404.0 - Not Found), EMS (Shell) is working - if i try a get-mailboxserver it gives me the correct servername.
Exchange Services are running:
Running MSExchangeADTop... Microsoft Exchange Active Directory...
Running MSExchangeAntis... Microsoft Exchange Anti-spam Update
Running MSExchangeDelivery Microsoft Exchange Mailbox Transpor...
Running MSExchangeDiagn... Microsoft Exchange Diagnostics
Running MSExchangeEdgeSync Microsoft Exchange EdgeSync
Running MSExchangeHM Microsoft Exchange Health Manager
Stopped MSExchangeIMAP4BE Microsoft Exchange IMAP4 Backend
Running MSExchangeIS Microsoft Exchange Information Store
Running MSExchangeMailb... Microsoft Exchange Mailbox Replication
Running MSExchangeMigra... Microsoft Exchange Migration Workflow
Stopped MSExchangePOP3BE Microsoft Exchange POP3 Backend
Running MSExchangeRPC Microsoft Exchange RPC Client Access
Running MSExchangeServi... Microsoft Exchange Service Host
Running MSExchangeSubmi... Microsoft Exchange Mailbox Transpor...
Running MSExchangeTrans... Microsoft Exchange Transport
Running MSExchangeTrans... Microsoft Exchange Transport Log Se...
Running MSExchangeUM Microsoft Exchange Unified Messaging
So, how to proceed ? Try to download a new ISO for Exchange 2013 incl. SP1 and run the setup again ?
What happens to the existing (corrupt) installation of the exchange which is not working ?
Thanks for your help
BrunoHi,
From the error message, the cabinet file 'EngineInstanceData.cab' required for this installation is corrupt and cannot be used. I'm afraid you have to download a new ISO for Exchange 2013 incl. SP1 and run the setup again.
If it still doesn't work, I recommend you remove the failed Exchange server installation, then re-install Exchange server.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Cannot edit/create new mailbox in ECP - Exchange 2013 CU6
Hello, I am currently running Exchange 2013 CU6. I cannot perform tasks related to recipients such as edit/create new mailbox. Additionally I cannot view the properties of the virtual directories.
I tried multiple browsers (Chrome, Firefox, IE) in different PCs and the result is the same
For example, I cannot click "Browse" in "new user mailbox" tab
"New local Mailbox move" page displays blank
I browsed through the event logs and found the following errors (Event 4 and Event 21):
Event 4
Current user: 'Unauthenticated'
Request for URL 'https://mailserver.address..com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address..capcx.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. --->
System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at
System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
completedSynchronously)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at
System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
resources file.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager'
could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
IsGlobalSnapshot: True
Event 21
Current user: 'Unauthenticated'
Script request for URL 'https://mailserver.address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
resources file.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager'
could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
IsGlobalSnapshot: True
Any help?Hello Amy,
I will try to follow your suggestions. I will update once I get access to the server.
Anyways, the whole thing was back to normal for 1 day on its own, but right now the issue is happening again. Permission-wise, the account I used is in listed Organization Management role
Update: I forgot to try the EMS, but after I recycle the
MSExchangeECPAppPool, everything works fine, except for viewing Groups and Permissions
An error in the event viewer is displayed:
Current user: 'Unauthenticated'
Script request for URL 'https://address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US(https://address.com/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly,
False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy,
False],[Eac.UnlistedServices, False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],], IsGlobalSnapshot: True
However, after a while, things are back to normal... I don't understand what's happening.. -
Cannot disable a mailbox in Exchange 2013 CU6!?!?!?!
I cannot disable a mailbox in Exchange 2013 CU6. I get the following error:
Anyone seen this error? As you know, I just want to remove the Exchange attributes from the user object in Active Directory. Of course, deleting the user object works just fine but don't want to go that route.I tried with the EMS (Powershell) and I still get an error:
[PS] C:\>disable-mailbox [email protected]
Confirm
Are you sure you want to perform this action?
Disabling mailbox "[email protected]" will remove the Exchange properties from the Active Directory user object and mark the mailbox in the database for removal. If the mailbox has an archive or remote archive, the archive will also
be
marked for removal. In the case of remote archives, this action is permanent. You can't reconnect this user to the remote archive again.
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
Y
Active Directory operation failed on LocalDCName.local.com. This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090CB9, comment: Error in attribute conversion operation, data 0, v2580
+ CategoryInfo : NotSpecified: (:) [Disable-Mailbox], ADOperationException
+ FullyQualifiedErrorId : [Server=LA-MBX01Server,RequestId=6ed97c1e-ae68-4670-a097-c4e65f683274,TimeStamp=11/18/2014 7:50:07 PM] [FailureCategory=Cmdlet-ADOperationException] 8D6C0FEB,Microsoft.Exchange.Management.RecipientTasks.Disable
Mailbox
+ PSComputerName : LocalDCName.local.com
I captured everything with the START-TRANSCRIPT cmdlet and changed the specific values to our organization (i.e., "[email protected]" and "LocalDCName.Local.com"). I've tried this on other mailboxes and I receive the same error whether
I use EMC or EMS. I believe this might be AD schema related just not sure where. -
MS KB3011140 breaks information store in Exchange 2013 CU6
Hello,
Last night Microsoft KB 3011140 was inadvertently installed on our Exchange 2013 CU6 server. I just want to warn everyone that you should be very cautious with this update. Upon reboot, the information store would crash, recover, then crash and
recover, infintly. End user symptoms are the pop up bubble in the lower right regarding Outlook lost connectivity to Exchange server, then a few minutes later Outlook restored connectivity to Exchange, rinse and repeat.
This constant up and down would cause many freezes and slowness in Outlook. The last time we had this issue was when we went to CU6. Microsoft tech support though free of charge installed a patch Exchange2013-KB2997209_2997847-x64.en.msp and
that fixed our problem. They left the patch for us, so I thought I would try to re-run this. It progressed for awhile and then rolled back saying it encountered an unexpected error (what else is new?).
So I removed KB 3011140 which took about 35 minutes to do and upon reboot Exchange is back up and running.
The only side effect I am noticing today is Lync 2013 is asking for Exchange credentials and EWS Internal / EWS External URI's are not populated, however I have no issues reading my conversation history and calendar in Lync. I need to reboot my machine
yet but other people have started reporting the same thing.Hi KJSTech1,
Thanks for your generous sharing and glad to know it works after recycling the MSExchangeServicesAppPool.
It's really hard to say why the patch cause this issue, since I didn't find someothers has the same issue. Thanks for your reporting.
Thanks
Mavis Huang
TechNet Community Support -
Exchange 2013 management tools installation on windows 2012 standard edition gives error.
Exchange 2013 management tools installation on windows 2012 standard edition gives following error.
Does anyone observed this issue ?
Error:
The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
My Test lab is having
Exchange 2013 installed (xyz.local) domain and working fine.
Now i am installing Exchange Management tools on server which is member of (xyz.local) Domain (base OS : Windows 2012 standard edition : Windows updated)
Best Regards
sameer PrabhuneHi Sprabhune,
It should work.
Did you install the tool by GUI or cmd?
Please select "Automatically install Windows Server roles and features that are required to install Exchange Server" to have the Setup wizard install required Windows prerequisites.
If possible, please try to install the tool on Windows 7/8 client to test.
Exchange 2013 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354.aspx
Frank Wang
TechNet Community Support -
Migration Exchange 2010 to Exchange 2013 with CAS Array and DAG
Dear All,
I am starting the migration of Exchange 2010 2 servers (CAS/Mailbox) with DAG no CAS Array to Exchange 2013 with 2 servers CAS array and 2 Mailbox servers with DAG. I read on some blogs that no requirement of CAS array on Exchange 2013. My concern how to
configure NLB on CAS servers for the client to connect.
Please guide and have any deployment guide for this, kindly share.
ThanksHi ,
As you said there is no use and meaning of having the cas array in exchange 2013 and also thanks a lot to Microsoft for introducing an single namespace facility in exchange 2013.
My suggestion and Microsoft recommendation should be to go with hardware load balancers for exchange 2013 rather than using the windows NLB and round robin method.
Why we need to go for HLB ?
Disadvantages
of some load balancing methods :
Windows
NLB :-
If you use Windows NLB then it can provide redundancy on server level failure and not on application level.
DNS
round robin :-
In case if we use the windows round robin method for load balancing then it wouldn't provide server level
and application level redundancy during the failures.At the Same time we need to manually adjust the DNS records during the server failure but on the client end dns caches will create the issues.
Configuring NLB for exchange 2013 :
http://msexchangeguru.com/2013/08/14/windowsnlb/
NLB configurations for exchange 2010 and 2013 will be same.
Configuring round robin for exchange 2013 :
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
Advisable method is to have the CAS and MBX roles on the same box if NLB not comes it to play.Because windows failover clustering and NLB cannot be configured on the same box.In exchange 2013 cas role is a stateless server role so there is no need to have
that role on a separate box.
Thanks & Regards S.Nithyanandham -
Large ETLTraces files after Exchange 2013 CU6
After installing Exchange 2013 CU6, you may notice the Exchange Drive is consumed a lot than before and the size is increasing rapidly. After troubleshooting, you may find everything is running properly and
there is no issues with your Exchange Server.
Then you need to check whether the files in the following location is the root cause:
C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\logfie
C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\ETLTraces
(You may find log files like “DocumentProcessingTrace_XX.etl )
Prior to CU6, there is not ETLTrace folder listed in this location and there are log folders however the log file has files no exceeding 7 MB size.
Post upgrade, there comes the ETLTrace folder and the files in this folder are close to 50 MB and the log files folder have log files exceeding 50 MB size.
This is a designed behavior in Exchange CU6, if you have limited hard drive space, as a workaround solution, we can safely remove or move the location of these lo files:
Before doing the changes, please firstly stop the health monitoring service. To Change the Log File Path, the Registry Key value is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Search Foundation for Exchange\Diagnostics
To Change the ETLTrace path the registry Value is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.@Simon_Wu, I tried your solution. However after a couple of days the logs were moved back to the original, default location. It looks like the server has a process which checks for hacks and undoes any attempts to change the path.
Interestingly the altered Registry entries remained altered, however the files were switched back to the default location. It generates just over 1Gb of logs per day on a largely idling Exchange 2013 CU7 server with 350 mailboxes.
Go figure!
What I found to work consistently and reliably is to replace default folders with junction points to another folder on another drive.
I also found that these files are created by a process which runs under the System process (PID 4), therefore you'll need to restart the server in Safe Mode to replace the default folders with junction points. -
Exchange 2013 CU6 migration batch
Hello
After install exchange 2013 cu6 server to root domain in multiple domain environment I cant move mailbox from exchange 2007 to new server because migration batch search mailbox only root domain controller.
ADTopology list all child domain dc without error.
setup /ps and /pad run without error.
but new-moverequest working.
please help.
Udvozlettel:Sneff GaborHi
It might be a bug in the GUI as powershell is working. Did you also update exchange 2007 to its latest rollup?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
How to connect Apple TV to Sony str-dg800?
Need to understand how to connect AppleTV 3GL to Sony STR-DG800 A/V receiver.
-
I'm setting up a PC for someone else and I have to access my iCloud account from this new system
All I want to do is get into my iCloud account from a different system (pc) that is new so I can set it up. it is so locked up with "we need your name" that I hate buying anything with new OS. It;'s all in your bank account on your street in your bed
-
Risk Categories in credit management
Hello Gurus, How can I get the configuration details for the different risk categories that are defined in an sap systems for credit controlling area? Thank you.
-
Deployed content is missing in portal
Dear portal gurus, I deployed webdynpro application through NWDS but it is not displayed in the portal . It is showing a message succesfully deployed in the portal plz help me santhosh
-
Just upgraded to Lion and MS Word no longer works
Not only does Word not work, but I can't even open a word doc in Pages.