Exchange 2013 CU6 with DAG - ECP Delete does not go to soft-delete state, retention policy ignored

I am not sure if this is a BUG or this is as intended.  Typically if a mailbox is 'deleted' from the EAC or ECP console the user account is disabled and the mailbox is marked for removal (soft-delete) until the retention policy expires the item (default
30 days). However we deleted a mailbox and the mailbox was purged immediately as well as the user was moved to the hidden recycle bin in Active Directory.
We replicated this issue twice in a DAG environment, we do not have this issue in a non-DAG environment.
Question:  Other than restoring from the backup, is there a way to recover the mailbox?
Thank You,
-Jake
Jacob Evans Jake of All Trades

Hi,
I tested in my lab, Exchange 2013 CU1 with DAG deployed, if I deleted a mailbox from EAC, then it would be a disconnected mailbox and the associated Active Directory user account was also deleted. I could find it under the Disconnected Mailbox.
Was the mailbox logged ever?
If you delete a mailbox that you never log in, it won't show as disconnected mailbox.
And for the question :"Question:  Other than restoring from the backup, is there a way to recover the mailbox?", I'm afraid you have to recover from backup.
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

  • In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work.  Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

    in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
    Tom at the Genius Bar told me that Option Delete would work. It does not.
    I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
    This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
    When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • Cannot edit/create new mailbox in ECP - Exchange 2013 CU6

    Hello, I am currently running Exchange 2013 CU6. I cannot perform tasks related to recipients such as edit/create new mailbox. Additionally I cannot view the properties of the virtual directories.
    I tried multiple browsers (Chrome, Firefox, IE) in different PCs and the result is the same
    For example, I cannot click "Browse" in "new user mailbox" tab
    "New local Mailbox move" page displays blank
    I browsed through the event logs and found the following errors (Event 4 and Event 21):
    Event 4
    Current user: 'Unauthenticated'
    Request for URL 'https://mailserver.address..com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address..capcx.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
    failed with the following error:
    Microsoft.Exchange.Management.ControlPanel.BadRequestException:
    The request sent by your browser was not valid. ---> Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. --->
    System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at
    System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
    completedSynchronously)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at
    System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
    completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.BadRequestException:
    The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
    resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
    System.Exception: 'ToolkitScriptManager'
    could not generate combined script resources file.
    Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
    False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
    True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
    True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
    False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
    False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
    False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
    False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
    False],],  Flights:[],  Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
    IsGlobalSnapshot: True
    Event 21
    Current user: 'Unauthenticated'
    Script request for URL 'https://mailserver.address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
    failed with the following error:
    Microsoft.Exchange.Management.ControlPanel.BadRequestException:
    The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
    resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
    System.Exception: 'ToolkitScriptManager'
    could not generate combined script resources file.
    Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
    False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
    True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
    True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
    False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
    False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
    False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
    False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
    False],],  Flights:[],  Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
    IsGlobalSnapshot: True
     Any help?

    Hello Amy,
    I will try to follow your suggestions. I will update once I get access to the server.
    Anyways, the whole thing was back to normal for 1 day on its own, but right now the issue is happening again. Permission-wise, the account I used is in listed Organization Management role
    Update: I forgot to try the EMS, but after I recycle the
    MSExchangeECPAppPool, everything works fine, except for viewing Groups and Permissions
    An error in the event viewer is displayed:
    Current user: 'Unauthenticated'
    Script request for URL 'https://address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US(https://address.com/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US)'
    failed with the following error:
    Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
       at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
    System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
    Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly,
    False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
    False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy,
    False],[Eac.UnlistedServices, False],],  Flights:[],  Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],], IsGlobalSnapshot: True
    However, after a while, things are back to normal... I don't understand what's happening..

  • I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    Hi,
    From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
    Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
    http://support2.microsoft.com/kb/2997209
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Cannot disable a mailbox in Exchange 2013 CU6!?!?!?!

    I cannot disable a mailbox in Exchange 2013 CU6. I get the following error:
    Anyone seen this error? As you know, I just want to remove the Exchange attributes from the user object in Active Directory. Of course, deleting the user object works just fine but don't want to go that route. 

    I tried with the EMS (Powershell) and I still get an error:
    [PS] C:\>disable-mailbox [email protected]
    Confirm
    Are you sure you want to perform this action?
    Disabling mailbox "[email protected]" will remove the Exchange properties from the Active Directory user object and mark the mailbox in the database for removal. If the mailbox has an archive or remote archive, the archive will also
    be 
    marked for removal. In the case of remote archives, this action is permanent. You can't reconnect this user to the remote archive again.
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"): 
    Y
    Active Directory operation failed on LocalDCName.local.com. This error is not retriable. Additional information: The parameter is incorrect.
    Active directory response: 00000057: LdapErr: DSID-0C090CB9, comment: Error in attribute conversion operation, data 0, v2580
        + CategoryInfo          : NotSpecified: (:) [Disable-Mailbox], ADOperationException
        + FullyQualifiedErrorId : [Server=LA-MBX01Server,RequestId=6ed97c1e-ae68-4670-a097-c4e65f683274,TimeStamp=11/18/2014 7:50:07 PM] [FailureCategory=Cmdlet-ADOperationException] 8D6C0FEB,Microsoft.Exchange.Management.RecipientTasks.Disable 
       Mailbox
        + PSComputerName        : LocalDCName.local.com
    I captured everything with the START-TRANSCRIPT cmdlet and changed the specific values to our organization (i.e., "[email protected]" and "LocalDCName.Local.com"). I've tried this on other mailboxes and I receive the same error whether
    I use EMC or EMS. I believe this might be AD schema related just not sure where.

  • Large ETLTraces files after Exchange 2013 CU6

    After installing Exchange 2013 CU6, you may notice the Exchange Drive is consumed a lot than before and the size is increasing rapidly. After troubleshooting, you may find everything is running properly and
    there is no issues with your Exchange Server.
    Then you need to check whether the files in the following location is the root cause:
    C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\logfie
    C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\ETLTraces
    (You may find log files like “DocumentProcessingTrace_XX.etl )
    Prior to CU6, there is not ETLTrace folder listed in this location and there are log folders however the log file has files no exceeding 7 MB size.
    Post upgrade, there comes the ETLTrace folder and the files in this folder are close to 50 MB and the log files folder have log files exceeding 50 MB size.
    This is a designed behavior in Exchange CU6, if you have limited hard drive space, as a workaround solution, we can safely remove or move the location of these lo files:
    Before doing the changes, please firstly stop the health monitoring service. To Change the Log File Path, the Registry Key value is:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Search Foundation for Exchange\Diagnostics
    To Change the ETLTrace path the registry Value is:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    @Simon_Wu, I tried your solution. However after a couple of days the logs were moved back to the original, default location. It looks like the server has a process which checks for hacks and undoes any attempts to change the path.
    Interestingly the altered Registry entries remained altered, however the files were switched back to the default location. It generates just over 1Gb of logs per day on a largely idling Exchange 2013 CU7 server with 350 mailboxes.
    Go figure!
    What I found to work consistently and reliably is to replace default folders with junction points to another folder on another drive.
    I also found that these files are created by a process which runs under the System process (PID 4), therefore you'll need to restart the server in Safe Mode to replace the default folders with junction points.

  • Exchange 2013 CU6 event id 1003

    Installed cu6, after that OWA and ECP stopped to work, with a redirection loop, when I check my eventlogs I see thousands of this error message:
    RpcHttp] An internal server error occurred. The unhandled exception was: System.MissingMethodException: Method not found: 'System.String Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetSafeName(System.Security.Principal.IIdentity)'.
       at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClasse.<OnEndRequest>b__d()
       at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
    Cant find a workaround, anyone else seen this error?

    Maybe this can help someone.
    v 
    Replaced SharedWebConfig files under the location "V15\FrontEnd\HttpProxy"
    v 
    Added the missing permission on Exchange Back End Web Site by comparing the same with our lab
    v 
    On IIS
    è Exchange Back End
    è Changed Physical Path
    è it to "V15\ClientAccess"
    v 
    Still after which we couldn’t browse OWA under Exchange Back End using Port 444 but found that ECP works fine
    v 
    Replaced the SharedWebConfig file from working Exchange 2013 CU6 under the location "V15\ClientAccess"
    v 
    Ran IISReset
    v 
    Confirmed that OWA and other virtual directories as well started working fine without any issues

  • EAC and IMAP Issues after Exchange 2013 CU6

    After deploying CU6 to Exchange servers there is no way to perform activities on Exchange Online (cosidering hybrid deployment). I noticed that there is a fix for it in http://support.microsoft.com/kb/2997355 but
    it seems that it doesn’t do the trick. After installing CU6 file which is altered in the script cannot be found (RemoteDomains.xaml).
    Also after installing CU6 I've noticed issue with IMAP and Thunderbird. It seems that commands like move are interpreted by the server as bad commands (error 12).
    Did you encounter with any of those problems? Do you have/recommend any workaround or fix?

    No, Exchange is in default direcotry. I've even tried v2 of script which gets Exchange path from registry.
    This file does not exist (I've looked on both CAS na MDBs)

  • MS KB3011140 breaks information store in Exchange 2013 CU6

    Hello,
    Last night Microsoft KB 3011140 was inadvertently installed on our Exchange 2013 CU6 server.  I just want to warn everyone that you should be very cautious with this update.  Upon reboot, the information store would crash, recover, then crash and
    recover, infintly.  End user symptoms are the pop up bubble in the lower right regarding Outlook lost connectivity to Exchange server, then a few minutes later Outlook restored connectivity to Exchange, rinse and repeat.
    This constant up and down would cause many freezes and slowness in Outlook.  The last time we had this issue was when we went to CU6.  Microsoft tech support though free of charge installed a patch Exchange2013-KB2997209_2997847-x64.en.msp and
    that fixed our problem.  They left the patch for us, so I thought I would try to re-run this.  It progressed for awhile and then rolled back saying it encountered an unexpected error (what else is new?).
    So I removed KB 3011140 which took about 35 minutes to do and upon reboot Exchange is back up and running.
    The only side effect I am noticing today is Lync 2013 is asking for Exchange credentials and EWS Internal / EWS External URI's are not populated, however I have no issues reading my conversation history and calendar in Lync.  I need to reboot my machine
    yet but other people have started reporting the same thing.

    Hi KJSTech1,
    Thanks for your generous sharing and glad to know it works after recycling the MSExchangeServicesAppPool.
    It's really hard to say why the patch cause this issue, since I didn't find someothers has the same issue. Thanks for your reporting.
    Thanks
    Mavis Huang
    TechNet Community Support

  • DC Restart when start installing Exchange 2013 CU6

    I have a domain installed on windows server 2012 R2 with function level 2008 R2 and when i try to install "as a administrator" Update for exchange 2013 CU6 or CU5  DC restart and am facing this error :
    Error:
    The following error was generated when "$error.Clear(); 
    install-CannedAddressLists -DomainController $RoleDomainController
    " was run: "Microsoft.Exchange.Data.Directory.ADTransientException: Failed to reconnect to Active Directory server  Make sure the server is available, and that you have used the correct credentials. ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryServerDownException:
    Active Directory server is not available. Please retry at a later time.
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnectionFromPool(ConnectionPoolType connectionPoolType, ADObjectId domain, String serverName, Int32 port, Boolean& serverConnectionPresentButDownOrDisconnected)
       at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, ADObjectId domain, String serverName, Int32 port, NetworkCredential credential)
       at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, NetworkCredential networkCredential, String serverName, Int32 port)
       at Microsoft.Exchange.Data.Directory.ADDataSession.GetConnection(String preferredServer, Boolean isWriteOperation, String optionalBaseDN, ADObjectId& rootId, ADScope scope)
       at Microsoft.Exchange.Data.Directory.ADDataSession.GetWritableConnection(String preferredServer, ADObjectId identity, ADRawEntry scopeDeterimingObject)
    I already prepare AD and Schema before start install 
    Please Advice Thanks

    Hi   Midoooz
    Thank you for your question.
    Do you install the Exchange Server on the DC?
    From you posted error, I think you can try to make your exchange server in maintenance mode, then you can try install exchange CU6.
    You can refer to the following link:
    http://support2.microsoft.com/kb/2713696
    Note:  
    Stop Maintenance Mode on the computer that is running Exchange Server after the Exchange Server 2013 CU6 upgrade is completed.
    If there are any questions, please let me know.
    Best Regard,
    Jim

  • Throttling policy not working on Exchange 2013 CU6

    Hi,
    We have a test throttling policy to restrict a mailbox to send at most 2 messages
    per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
    not fixing any related bugs.
    We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
    Throttling policy not working
    smtp service restart
    RPC Client Acces service restart
    The policy details:
    Get-ThrottlingPolicy  low_rate_limit |fl *limit*
    MessageRateLimit   : 2
    RecipientRateLimit : 1000
    Get-mailbox [email protected] | fl ThrottlingPolicy
    ThrottlingPolicy           : low_rate_limit
    Do you have any idea what is the problem?
    Thank you in advance.
    br,
    Zoltan

    Hi Zoltan,
    Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
    The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
    unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
    unlimited.
    https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Niko Cheng
    TechNet Community Support

  • Exchange 2013 CU6 migration batch

    Hello
    After install exchange 2013 cu6 server to root domain in multiple domain environment I cant move mailbox from exchange 2007 to new server because migration batch search mailbox only root domain controller. 
    ADTopology list all child domain dc without error.
    setup /ps and /pad run without error.
    but new-moverequest working.
    please help.
    Udvozlettel:Sneff Gabor

    Hi
    It might be a bug in the GUI as powershell is working. Did you also update exchange 2007 to its latest rollup?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • ' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

    ' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

    mardemar wrote:
    ... - the only one without an x delete button.
    What is the name of this App and where did you get it...?

  • My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them).  I think this started with Maverick?  Any solutions?

    My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them).  I think this started with Maverick?  Any solutions?

    one is gmail, one is a university email and they are both IMAP accounts (not that I know what that means)....

  • How to configure Exchange 2013 OWA with Single Sign On

    Hi All ,
    How to configure Exchange 2013 OWA with Single Sign On ?
    Thanks .

    Hi,
    From your description, I am not quite sure what you really want to achieve. Could you explain it furthermore? If you need to set up Exchange 2013 OWA single sign on with Exchange 2010, here is a helpful thread for your reference.
    Exchange 2013 OWA Single Sign on with Exchange 2010
    https://social.technet.microsoft.com/Forums/en-US/2899ebfc-8622-4cdc-8d77-d76b607618f7/exchange-2013-owa-single-sign-on-with-exchange-2010?forum=exchangesvrdeploy
    If that is not your case, please feel free to tell me.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

Maybe you are looking for