Exchange 2013 - EMC 2013 - View Mailbox Size With Column In EMC - How To View Mailbox Size Exchange 2013?

Is there a way to add a column to show each users mailbox size in the EMC for Exchange 2013 under recipients > mailboxes?
Such a simple tool would be so much easier for administrative purposes.

Hi,
There is no way to add the column of mailbox size back to EAC in Exchange 2013, I don't know why this option is removed and there is no official document explaining this issue.
To get the mailbox size, we can use commands to get it.
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Problem with Column types and String

Hi
I have some problem while comparing against empty string.
My column is of type it_Linked_Button. Actually it seems that column type doesn't matter.
If cell that belongs to this column is empty and based on other columns' values I put some value into this cell.
It works fine.
But when I clear that cell and try to put some value again nothing happens.
In my if statement I'm checking against empty string and it fails second time.
Before I put anything in that cell (in debugger) that value is "" so it is empty and it works.
(OK, I see that after I posted this message it was slightly reformated)
But after I put something and clear that cell and try to put something again (in debugger) I get "(here is some long space) " which fails String.IsNullOrEmpty(var) test.
What is going on? Has it something to do with Column type?
How to clear it so I can put something in it again?
One more thing - to put values and clear it I use DbDataSource SetValue method. And String.Empty or ""(doesn't matter)
Thanks
Kamil
NOTE
I made some workaround that gives me the behaviour I want but still I would like to know what is going on?
Edited by: Kamil Wydrzycki on Sep 24, 2009 12:57 PM

DrLaszloJamf wrote:
warnerja wrote:
DrLaszloJamf wrote:
1. Could you define an Enum? Then you could switch on enum values.
2. Wait for Java 7 which is supposed to extend switch to strings?3. Put the target strings in a collection, write a loop to find the match in the collection and use the matching index in the switch statement. At least that will get rid of the hashcode kludge, where it won't mistakenly 'match' a string which isn't the actual target.3b: Map<String, Command>Yep.
I also wanted to point this out to the OP:
For example, let's say the 7 character string "BugABoo" happens to have the same hashcode as "EDI_DOC". And let's say your input just happens to have the string "BugABoo" in it, where you're extracting the 7 character substring. See the problem? You're getting "BugABoo" but treating it as if it really were "EDI_DOC", by virtue of comparing hashcodes instead of actual strings.
OOPS!

Bought 10 gb Uploaded Iphone and IPad2, left with 2gb space. How to view pictures and other info in ICloud?

Bought 10 gb Uploaded Iphone and IPad2, left with 2gb space. How to view pictures and other info in ICloud? Can I upload documents from my desktop (Windows os)?
Thanks.

If you backed up your iphone to icloud, then there's a chance that doing a restore might bring back your photos. I say "chance" because many users have tried that (assuming they had photos turned in for backups in settings), but ended up not getting back any photos. If that happens, then they are gone.
Remember, you should have been syncing photos all along to a computer for archiving. Don't trust the pictures to an icloud backup.

Problem with columns in the middle of my book

I am writing my second book with Pages 2.02 and have run into a problem with columns. I want to add a long list of items as a list with check boxes for readers to check off. If I paste in enough text for three or four pages of two columns it gets messed up in various ways - the text flows into the following text if I don't use section breaks at the end instead of layout breaks, if I use section breaks it solves that one, but if I add anything to the list it changes all the columns across the pages so that one or several of the pages has way less in the right column than in the left. So far the left column fills the entire page all the time, but the right column has lots of spaces. If I switch back and forth from one column to two, it fixes it. If I add text before the list section it messes everything up again and because there is a section break I end up with a little bit of text on the last page and a huge gap before the single column part that follows.
Does anyone know how to get reliable results that will not mess me up when adding content before the list or in the list itself?
PowerBook G4 Mac OS X (10.4.8)

Hi Cymru,
Thank you for thinking about my problems. I guess I s half asleep when I posted and it didn't make sense.
I have so far 77 pages of the book divided into several chapters via section breaks. Inside the 5th section there is almost two pages of paragraphs. Those paragraphs could become 3.75 pages or who knows how long before the list of items. The list of items is 226 items separated by carriage returns and go from one word with 5 characters to 7 words and 34 characters. It needs to be a list with check boxes before them so that the user can check off the items that apply. It is a workbook about turning bipolar into an advantage and is currently 8.5 x 11 and printed on my laser printer for now, but when completed will be more like 8 x 10, so it needs to resize without major hassles.
I have tried every combination of breaks to get the list to flow in two columns, but perhaps have not done the correct combination. I show invisibles and layout. At the end of my paragraphs I do a paragraph return. I then do either a section break or a layout break, followed by a paragraph return and another layout or section break. I then put my curser before the paragraph break, but after the first section/paragraph break, and set columns to 2, evenly divided by default with 3.2026" columns and .3375" gutter, but I want them to change with page size in the future.
Once set up, I copy the text out of BBEdit and paste into the left column. It takes up several pages because it is formatted to do double spaces, so I use one of my styles to make it bold and single spaces. I then apply list style with image bullets and one of the default box images that came with Pages. There are 5 items in each column on the first page because it is close to the bottom, but flows into the next two pages. (with text edits it might end up 20 items in each column on the first page) The second page has 39 items in each column and the last page has 8 items in the left column only, but if with section breaks take up the whole page and the next paragraphs start on the next page. If I then add items to the list, every page gets messed up and the second page ends up with 39 on the left column and less items in the right column for each added item.
If I use layout breaks instead of section breaks, the paragraphs following my lists (now with only one column) end up under the list. What that means is I can see my bold items, but beneath them are my paragraphs that belong after the list. I can see the layout break at the end of the list, but the columns that are shown as part of the 'view layout' are visible right over the single column text also for the rest of the page. The only way to solve that is to go with section breaks and put up with the gap from the end of the list to the following paragraphs.
I hope this makes more sense.
Tom
PowerBook G4 Mac OS X (10.4.8)

I wrote an 2500 words assignment and saved in Microsoft word 97-2003 and by mistake replaced with another word file.How can i retain my original work?

I wrote an 2500 words assignment and saved in Microsoft word 97-2003 and by mistake replaced with another word file.How can i retain my original work?

Hi,
Does this happen to all 97-2003 Word files?
Word 2013 now has lots of updates compared with earlier version of Word, lots of features have been updated. Use Word 2013 to open documents created in earlier versions of Word (Word 97-2003 format), you will probably encounter unexpected problems,
expecially for those heavily formatted files.
We would suggest you to convert your document to the Word 2013 file format, then you will be able to access the new and enhanced features in Word 2013.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?

I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?

Hi,
thank you, it’s done! The Chat helped me! Now I cannot go into this forum anymore with my old password, but that’s not a big problem.
Best wishes,
Christian
Von: JimHess <[email protected]<mailto:[email protected]>>
Antworten an: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Datum: Montag, 20. April 2015 18:38
An: Christian Kogler <[email protected]<mailto:[email protected]>>
Betreff: I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?
I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?
created by JimHess<https://forums.adobe.com/people/JimHess> in Photoshop Lightroom - View the full discussion<https://forums.adobe.com/message/7454915#7454915>

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

Remember security on a TC is an illusion.
Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
Remember this the next time because anybody at all can change your passwords.
Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
Voila .. all your passwords in plain sight to any Tom Dick and Fred.

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

Apache FOP Problem with column width

We are using Apache FOP to generate simple pdf documents out of reports.
My problem is that the table in the pdf is as standard filled in with columns of same length.
Further on the content of some table fields is to large or sometimes there is to much room.
is there any possiblity to let fop react like html?
The smallest table field size should be like the content. I don't want to adjust all my reports, cause there are really many reports with pdf printing.
anyone an idea how to solve this with FOP?
i have no BI pubisher or other reporting engines for this problem
thx so far

Oliver,
I think what you're looking for is having your column width automatically adjusted based on the content of your column values. That is not possible with the built-in, generic XSL-FO template. What you can do is manually adjusting the column width to appropriate values on the print attributes page.
Regards,
Marc

When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/782039]</blockquote><br>
When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

With the new itunes, how am I able to do home share?

With the new iTunes, how am I able to do home share with my laptop from computer?

For your laptop turn on Home Sharing Making a note of what Apple ID you use.
Do the same for your other computer using the SAME apple ID it does not matter if it uses a different ID in the itunes store
If you cannot see the Home Sharing Icon
Ctrl + S to show the sidebar and the other computer library should be displayed under Shared
View > Show Sidebar for a Mac
Select the other computer library. select what you wish to copy over and click import at the bottom right

My homepage is hijacked, tried everything with no success. How can I get rid of it!

My homepage is hijacked, tried everything with no success. How can I get rid of it! (FupaSearch.com)

Back up all data. Rebuild the mailbox. Try again to delete the message.

I have a problem with adobe support advisor, how can i reinstall this program

i have a problem with adobe support advisor, how can i reinstall this program

hi wie kann ich adobe support advisor reinstalieren mac , ich bekomme fehlermeldung beim photoshop installation
Von meinem iPhone gesendet
Am 17.08.2014 um 07:17 schrieb Willi Adelberger <[email protected]>:
i have a problem with adobe support advisor, how can i reinstall this program
created by Willi Adelberger in Deutsche Foren - View the full discussion
Kannst Du mal anfangen Deine Frage zu stellen?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6647388#6647388
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Deutsche Foren by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

When I open email or texting I am often sent to the Web to either the Playstore to look at a new app or some site that want me to choose some singles site to chat with chick avatar. How do I remove this - what? cookie?

When I open email or texting I am often sent to the Web to either the Playstore to look at a new app or some site that want me to choose some singles site to chat with chick avatars. How do I remove this - what? cookie?

I will try safe mode.
I did download Ad Network Detector and opted out of JumpTap and AdMob. Today I found more: MoPub and Millenial which I will opt out of. I had previously opted out of Google Ads on the Cell phone but not on the net - so did that. Allegedly it take time for the opt outs to reach the originators of these pop ups
Thanks all for the suggestions - but not cleaned up yet.
Verizon Wireless Customer Support <[email protected]> wrote:
Verizon Wireless Customer Support created the discussion
"When I open email or texting I am often sent to the Web to either the Playstore to look at a new app or some site that want me to choose some singles site to chat with chick avatar. How do I remove this - what? cookie?"
To view the discussion, visit: https://community.verizonwireless.com/message/1081202#1081202
>

Exchange 2013 - EMC 2013 - View Mailbox Size With Column In EMC - How To View Mailbox Size Exchange 2013?

Similar Messages

Maybe you are looking for