Exchange 2013 event ID 36888 SChannel error 12 and 1203
I am running Windows Server 2012 STD with Exchange 2013 installed on the same server. I know that Microsoft doesnt recommend to do this, but I had no choice. Errors are follow:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 12.
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
- System
- Provider
[ Name] Schannel
[ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID 36888
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-11-25T23:30:34.120233400Z
EventRecordID 121125
Correlation
- Execution
[ ProcessID] 1064
[ ThreadID] 20184
Channel System
Computer server
- Security
[ UserID] S-1-5-18
- EventData
AlertDesc 10
ErrorState 12
System
- Provider
[ Name] Schannel
[ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID 36888
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-11-26T05:45:22.650086300Z
EventRecordID 121230
Correlation
- Execution
[ ProcessID] 1064
[ ThreadID] 45336
Channel System
Computer SERVER
- Security
[ UserID] S-1-5-18
- EventData
AlertDesc 10
ErrorState 1203
Process ID 1064 is Isass.exe
I found somewhere that error 1203 could be ignored, but nothing about error 12.
Server is running with selfsigned SAN certificate, hosted 2 exchange domains (10 mailboxes, 5 local, 5 linked for remote domain connected via external 2 way non transitive domain trust).
Thank you very much for any advise.
Regards,
Jan
Šerý
Hi Jan,
Based on my research for the Event 36888, the issue may be caused by not standard or corrupted behavior of web browsers or users, such as user use HTTP protocol to access Exchange service which is a SSL site on port 443.
Please check whether there is a HTTP redirect configured in your IIS Manager of Exchange server. Also reset web browsers to have a try. Here are some similar thread for this issue:
https://social.technet.microsoft.com/Forums/forefront/en-US/92c63737-c2a3-41f7-8878-3b0cf5ee95ff/new-install-event-log-schannel-event-id-36888?forum=Forefrontedgegeneral
http://ficility.net/2013/10/21/exchange-2013-exchange-2010-windows-server-2012-schannel-event-id36888-1203-tlsssl-error-the-root-cause/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support
Similar Messages
-
Exchange 2013 EMS throwing Access Denied error and Toolbox giving MMC error
Hi,
I am getting a very strange problem with an Exchange 2013 server deployed at a customer's site. After some hours of usage, EMS or Toolbox will not open and will throw below errors. However, if I restart the server, everything works fine for some hours before
the error start coming again. This does not affect mail flow or ECP but, I wonder if something is going wrong in the background and may cause a severe failure in future.
I tried hard but could not find the source of the problem.
EMS error:
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Hope someone has a solution to this.
PramodHi
It can be possibly a WIN RM Issue. Run
winrm quickconfig and see whether u are able to connect
If you are unable to connect then Try reinstalling the WinRM
Import-Module ServerManager
Remove-WindowsFeatureWinRM-IIS-Ext
Add-WindowsFeatureWinRM-IIS-Ext
Also check if you have a certificate assigned to the Default Web Site - HTTPS Binding/Port 443, and Exchange
Back End web site - HTTPS binding/Port 444
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+ New-PerfCounters -DefinitionFileName $f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
+ FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible. -
I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.
Hi,
From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
http://support2.microsoft.com/kb/2997209
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Event ID 36888 - Schannel - A fatal alert was generated and sent to the remote endpoint.
Exchange 2013: 2 x multi-role in one DAG - on-premise
Performing remote mailbox migration using internet (*non-exchange web-based tool*), to ship data from cloud Ex2010 server to Ex013 on-premise.
Have multiple failures when doing the mailbox data copy - my migration tool error code tells me that:
This error indicates that we were unable to authenticate to the source or destination mailbox and retrieve a list of folders when given 15
minutes to complete these operations. This may be because the source or destination is unusually slow, has a very large number of folders, or due to "hanging" networking calls.
Some mailboxes are copying, but around 80% are not. Checked all permissions and other factors.
I see in the System event log the following below:
Log Name: System
Source: Schannel
Date: 9/14/2013 2:14:53 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: server.domain.local
Description:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-09-14T20:14:53.699840000Z" />
<EventRecordID>135625</EventRecordID>
<Correlation />
<Execution ProcessID="544" ThreadID="17928" />
<Channel>System</Channel>
<Computer>server.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Anyone seen this? - not much recording this error available for Ex2013.Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Hi Simon
I opened a SEV B case today. Appears to directly reflect the amount of load i put through, in terms of data being shipped with our migration tool. That tool is basically logging into each mailbox using a superuser account and populating
it with mail and calendar data form a source cloud mailbox. No fancy co-existence or online move requests.
All throttle policies are removed. Attempting to migrate more than 20 mailboxes at a time results in the System Event log being filled with the Schannel error above. Reducing the amount below this still shows the errors appearing, but not enough
to stop mailbox data being shipped and the migration tool suffering a stop error.
I will update the thread tomorrow when i speak with the engineer. Surprised noone has had any input so far.
I have the same problem, here is some data. I have two exchange profiles and the 2nd one stops logging in after this error starts. I have to reset the wireless connection and restart outlook to clear the situation.
Dave Ladouceur -
Continuous "36888 Schannel Errors" in System Event Log when NOT connected to Internet
We are hoping someone will be able to assist with us this very strange issue please ?
We are using Windows 8.1 x64 Enterprise with Office 2013 and the latest Symantec Endpoint Proctecion v12.1.5 installed. They are managed using SCCM2012 in a large AD domain environment
When our workstations are NOT connected to the internet (only local intranet) the following errors appear in SYSTEM event log almost continuously (several times a minute).
Event ID:36888 User: SYSTEM OpCode:Info Level:Error Source:SChannel
"A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 70. The Windows Schannel error state is 11."
The process associated with these events is "Local Security Authority Process"
When an internet connection is enabled for these machines these 36888 errors will suddenly stop !.
An event "Error 36887 "A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 40." Is also occurring on these machines but only occasionally.
As a result, We suspect there must be a process continuously attempting to connect to an internet service and failing ?.
Some of the things we have tried so far;
- We have disabled all non-essential services (e.g. Windows Store Service) one by one but this didn't fix.
- We have tried disabling Tile updates on Start
- We have tried a bunch of different Group Policy settings to disable different combinations of TLS/SSL in IE config.
- We have searched the internet forums and tried some suggested fixes but this combination of error state and error code seems unique ?.
It doesn't happen on our Windows 7 x64 workstations that have much same apps & configuration.
Any advice or suggestions would be greatly appreciated !
Thanks.Hi Makes006,
This Event ID 36888 occurs if a user tries to access a web site using HTTP but specifies an SSL port in the URL.
We can try clean boot to troubleshoot whether this issue is caused by a third party program .
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
If there is no sensible impacts on operating the machines ,we can try to disable this log by modify the following registry key value to 0.
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL\EventLogging
For more information, please refer to the following link:
How to enable Schannel event logging in IIS
http://support.microsoft.com/kb/260729
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Exchange 2013, Event 1012, MSExchangeIS
Hi,
on an Exchange 2013 installation I get the following error event reported every 5 minutes:
ID 1012, Error, Source MSExchangeIS:
Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("9805D250E52E1C4BAEEF88B84AC1BDFE00000000000E0000"))"). Error information: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Internal error while processing request (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
Microsoft.Ceres.InteractionEngine.Component.ProcessingEngineException: Internal error while processing request
at Microsoft.Ceres.InteractionEngine.Component.CieProcessingEngine.LogAndRethrowException(Exception e)
at Microsoft.Ceres.InteractionEngine.Component.CieProcessingEngine.GetItems(Guid flowIdentifier, String outputName)
at SyncInvokeGetItems(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)).
I do not really have an idea how to approach this and can't find any related information.
Thanks for your help.I'm also getting the same error, tried the solution to no effect.
Error:
Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("D6A06323C909134BB77B2FE2114D06EA00000000000E0000"))"). Error information: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Internal error while processing request (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
Microsoft.Ceres.InteractionEngine.Component.ProcessingEngineException: Internal error while processing request
at Microsoft.Ceres.InteractionEngine.Component.CieProcessingEngine.LogAndRethrowException(Exception e)
at Microsoft.Ceres.InteractionEngine.Component.CieProcessingEngine.ExecuteSearchFlow(String flowName, IEnumerable`1 inputData)
at SyncInvokeExecuteSearchFlow(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)).
My ContentIndexState is Unknown.
I've also noticed this warning in the logs:
Event 1010, MSExchangeFastSearch
An operation attempted against a FAST endpoint exprienced an exception. This operation may be retried. Error details: Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.FaultException: Failed to create operator of type Microsoft.Exchange.Search.OperatorSchema.TransportRetrieverOperator. The operator type is not known to the system.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.PutFlow(String name, String serializedFlow)
at Microsoft.Exchange.Search.Fast.IndexManagementClient.<>c__DisplayClass1.<PerformFastOperation>b__0()
at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey)
--- End of inner exception stack trace ---
Help would be much appreciated! -
Hi,
We have a single Exchange 2013 server and are getting this error many times in a day. I haven't been able to find a solution and was wondering if anyone came across this error or have any suggestions.
Edition : Standard
AdminDisplayVersion : Version 15.0 (Build 913.22)
Watson report about to be sent for process id: 5816, with parameters: E12IIS, c-RTL-AMD64, 15.00.0913.022, M.Exchange.Imap4, M.Exchange.Net, M.E.N.NetworkConnection.BeginNegotiateTlsAsClient, System.InvalidOperationException, 99a4, 15.00.0913.007.
ErrorReportingEnabled: True
Thanks
AmitWe have exchange 2013 cu6 mailbox server and we keep getting the below event error message
Log Name: Application
Source: MSExchange Common
Date: 10/2/2014 1:06:25 PM
Event ID: 4999
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
Watson report about to be sent for process id: 30632, with parameters: E12, c-RTL-AMD64, 15.00.0995.029, M.E.RpcClientAccess.Service, M.E.Data.ApplicationLogic, M.E.D.A.U.HttpPhotoRequestBuilder.Build, System.NotSupportedException, 4e29, 15.00.0995.027.
ErrorReportingEnabled: True
Event Xml:
< Event xmlns="">
<System>
<Provider Name="MSExchange Common" />
<EventID Qualifiers="16388">4999</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-02T20:06:25.000000000Z" />
<EventRecordID>7826297</EventRecordID>
<Channel>Application</Channel>
<Computer></Computer>
<Security />
</System>
<EventData>
<Data>30632</Data>
<Data>E12</Data>
<Data>c-RTL-AMD64</Data>
<Data>15.00.0995.029</Data>
<Data>M.E.RpcClientAccess.Service</Data>
<Data>M.E.Data.ApplicationLogic</Data>
<Data>M.E.D.A.U.HttpPhotoRequestBuilder.Build</Data>
<Data>System.NotSupportedException</Data>
<Data>4e29</Data>
<Data>15.00.0995.027</Data>
<Data>True</Data>
<Data>False</Data>
<Data>Microsoft.Exchange.RpcClientAccess.Service</Data>
<Data>
</Data>
</EventData>
< /Event>
Services seem to be fine (Via test-servicehealth), but i do have a group of users that complain that their outlook 2013 email clients will go non-responsive a few times a days. Wondering if this is related. Also this error is appearing every few minutes.
Anyone else experiencing this? -
Exchange 2013 Event ID 106 MSExchange Common
Event ID 106 is generated on Exchange 2013 ,already updated Perfcounters.ps1 according to this article.still getting
same error.
http://support.microsoft.com/kb/2870416/en-us
Log Name: Application
Source: MSExchange Common
Date: 1/13/2014 8:59:30 PM
Event ID: 106
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: DC4.chickbuns.com
Description:
Performance counter updating error. Counter name is Time in Resource per second, category name is MSExchange Activity Context Resources. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance 'ad-w3wp-msexchangeowaapppool'
already exists with a lifetime of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited.
Processes running while Performance counter failed to update:
3148 MSExchangeDelivery
388 wininit
1568 SMSvcHost
8976 w3wp
2748 conhost
6292 w3wp
380 csrss
3924 MSExchangeFrontendTransport
768 svchost
1948 sftracing
1156 spoolsv
956 svchost
7204 w3wp
752 LogonUI
2128 noderunner
3900 MSExchangeSubmission
8968 w3wp
1928 ForefrontActiveDirectoryConnector
1336 taskeng
7048 w3wp
348 svchost
3692 Microsoft.Exchange.EdgeSyncSvc
4676 Microsoft.Exchange.RpcClientAccess.Service
4872 MSExchangeMailboxReplication
340 csrss
1556 UMWorkerProcess
8020 w3wp
3088 Microsoft.Exchange.AntispamUpdateSvc
1312 MSExchangeHMHost
7948 w3wp
424 winlogon
1500 rundll32
4448 MSExchangeMailboxAssistants
900 svchost
6700 scanningprocess
504 lsm
5816 umservice
4244 Microsoft.Exchange.ServiceHost
2736 MSExchangeHMWorker
496 lsass
1840 vmtoolsd
1872 noderunner
488 services
1396 inetinfo
680 svchost
1296 hostcontrollerservice
7036 w3wp
1688 noderunner
1216 svchost
6740 scanningprocess
2364 svchost
1844 svchost
856 svchost
4992 conhost
6760 w3wp
7816 w3wp
4196 Microsoft.Exchange.Pop3Service
2028 updateservice
1236 fms
2220 noderunner
4976 msexchangerepl
7544 w3wp
600 svchost
5364 MSExchangeTransportLogSearch
2464 WMSvc
4376 conhost
1416 Microsoft.Exchange.Diagnostics.Service
3580 Microsoft.Exchange.Imap4Service
6336 scanningprocess
1016 Microsoft.Exchange.Directory.TopologyService
4364 Microsoft.Exchange.Imap4
5992 Microsoft.Exchange.UM.CallRouter
6920 w3wp
2388 wlms
5144 MSExchangeThrottling
808 svchost
3760 Microsoft.Exchange.Search.Service
4744 Microsoft.Exchange.Pop3
248 smss
2964 WmiPrvSE
1584 rundll32
5840 Microsoft.Exchange.Store.Worker
4 System
4336 Microsoft.Exchange.Store.ServiceHi,
Based on my research, the issue can be resolved by removing and re-creating all Exchange performance counters:
add-pssnapin Microsoft.Exchange.Management.PowerShell.Setup
$files=get-childitem “C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\" *.xml |where-object {!($_.psiscontainer)}
foreach ($file in $files) {remove-perfcounters -definitionfilename $file.fullname}
foreach ($file in $files) {new-perfcounters -definitionfilename $file.fullname}
For more information, you can refer to the following thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/a8e35d2a-5e09-4ec5-b5c8-43554d3b8b78/lots-of-errors-106-msexchange-common?forum=exchangesvradmin
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Exchange 2013 Event ID 9646 - MoMT 500 Folder
Hello,
I am running Exchange 2013 CU3 and I'm getting an Event ID 9646 in the application event log. Full text below. It would appear it's saying the user is trying to open more than 500 folders but I have looked at her mailbox and while she has a lot of folders,
it's not over 500. Any suggestions or ideas?
Thanks,
Brad
The description for Event ID 9646 from source MSExchangeIS cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
/O=xxxxx/OU=xxxxx/cn=Recipients/cn=JRoberts
MoMT
500
Folder
the message resource is present but the message is not found in the string/message table
BradG87Hi,
About event 9646, this could be caused when a MAPI session tried to open more than the maximum number of objects that are allowed for the object type specified in the event description.
To resolve this issue, please try to modify the registry key and set the "objtFolder" value to 1000 to check the result.
For more details, please refer to the solution in the following article.
MSExchangeIS 9646
http://technet.microsoft.com/library/ff980641.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2013 - schema prep (net assambly error)
Setup.exe /prepareschema /IAcceptExchangeserverlicenseterms
gives error: [ERROR] An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default,
so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See
http://go.microsoft.com/fwlink/?LinkId=155569 for more information. ; Any hints how to solve this?
bostjancHello,
According to the above error, exchange setup file is copied from a network location. So please try to unblock "
this file came from another computer and might be blocked to help protect this computer" on properties of exchange setup file.
Please follow the Ed's suggestion to check the exchange 2013 prerequisites.
Here is an article for your reference.
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support -
Exchange 2013 Hybrid Configuration Wizard OAuth error
Hi,
We are facing following error when we run OAuth configuration after complete the Hybrid Configuration Wizard.
Error:
ScenarioFailureException
Message:
Exchange OAuth authentication couldn't find any accepted domains in your on-premises organization.
Verify you've configured at least one on-premises accepted domain.
Location:
at Microsoft.Online.CSE.HRC.Activities.OAuthActivities.GetCertificateActivity.Run()
at Microsoft.Online.CSE.HRC.Workflow.Activity.WorkflowBaseActivity.Launch()
at Microsoft.Online.CSE.HRC.Workflow.Runtime.WorkflowActivityHelper.Execute(ActivityContext context, Boolean launch)
at System.Activities.NativeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager,
Location resultLocation)
Environment:
2x Exchange 2013 CU6 (DAG+one ClientAccess)
Directory Sync Server
No ADFS server since we don't need single sign on
Office 365 E3 Tenant
We have tried manually setup the OAuth configuration according to the below TechNet article but failed when running the ExportAuthCert.ps1
script file. It couldn't match the certificate thumbprint with the location "Cert:\LocalMachine\My"
http://technet.microsoft.com/en-us/library/dn594521%28v=exchg.150%29.aspx
Please help!
Thanks in Advance
RoshanWe have the exact same Issue, tried the exact same setup and NO JOY!! - any resolution yet?
Also found this article:
http://consulting.risualblogs.com/blog/2014/09/10/exchange-2013-cu6-hybrid-users-with-o365-unable-to-query-freebusy-for-on-premises-users/comment-page-1/#comment-5192
..... but did not fix the free/busy
Best Regards,
Francois -
Exchange 2013 Services pack 1 installation Error
Hey Guys ,
I'm facing an issue while installing exchange 2013 on server 2012 R2 , below are the details . I'm installing it on test bed however i'm failing at organisation preparation stage.
Error:
The following error was generated when "$error.Clear();
install-RuleCollection -Name:"ClassificationDefinitions" -DomainController $RoleDomainController;
New-ClassificationRuleCollection -InstallDefaultCollection
" was run: "Unable to continue processing classification rule collection payload for decryption or further validations. Payload may contain invalid data.".
Please Help me
Sandy CarlosHi,
I got a error when i run this command
Setup.exe /PrepareAD /OrganizationName:<name> /IAcceptExchangeServerLicenseTerms
then i got a error
on Organization Configuration Step.
and i got same error when run the setup when setup is going for Organization Preparation.
Thanks -
Exchange 2013 CU2 to CU3 upgrade error
I'm getting this error when running an Exchange 2013 CU2 to CU3 upgrade. Please help!
Error:
The following error was generated when "$error.Clear();
$keyPath = "HKLM:\Software\Microsoft\WebManagement\Server";
if (!(Get-Item $keyPath -ErrorAction SilentlyContinue))
New-Item $keyPath -Force
Set-ItemProperty -path $keyPath -name "EnableRemoteManagement" -value 0x1 -Type DWORD -Force;
if (Get-Service WMSVC* | ?{$_.Name -eq 'WMSVC'})
Set-Service WMSVC -StartupType Automatic
Stop-SetupService -ServiceName WMSVC;
Start-SetupService -ServiceName WMSVC
" was run: "Service 'WMSVC' failed to reach status 'Running' on this server.".if (Get-Service WMSVC* | ?{$_.Name -eq 'WMSVC'})
Set-Service WMSVC -StartupType Automatic
Stop-SetupService -ServiceName WMSVC;
Start-SetupService -ServiceName WMSVC
" was run: "Service 'WMSVC' failed to reach status 'Running' on this server.".
Is the certificate for Web Management Service (WMSvc) missing?
If so, then you need to create a new one and assign it to the feature "Management Service" in IIS.
Martina Miskovic -
EXCHANGE 2013 - setup.exe schema prep error
Trying to install exchange 2013 sp1 (downloaded from here:
http://www.microsoft.com/en-us/download/details.aspx?id=41994).
on 2012 r2 server.
After I run (with domain admins affcourse): Setup.exe /prepareschema /IAcceptExchangeserverlicenseterms
I recieve an error that user is not a member of schema admins and enterprise admins but I have double checked that account is in those groups. So, what am I missing there?
bostjancHi Joe,
since we can make sure the user account is a member of Domain Admins, Schema Admins and Enterprise Admins groups, please also add the user to be a member of Organization Management group, don’t
just add the Domain admin to the Organization Management group, please directly add the account to the member of Organization Management group.
Then check if the account inherit permission form its parent level. To do this, please refer to the following steps:
Open ADUC, select “View->Advanced Features”;
Navigate to the user account you used, check its
Properties;
On the
Security tab, click Advanced, please make sure the inherited permission is enabled in the lower left corner. If not, please click “Enable Inheritance” to enable it.
Then use this account to login the server;
Right click “Command Prompt” and choose “Run as administrator”, then navigate to the setup file location, try to prepare schema by command:
Setup.exe /prepareschema /IAcceptExchangeserverlicenseterms
6. If issue persists, please try Mavis’s suggestion to create a new user account, use above steps add the sufficient permission, then check the issue again.
Meanwhile, what do you mean by “single label domain”? Do we have a single domain and prepared DC/GC, or have parent/child domain configuration.
Regards, Eric Zou
Maybe you are looking for
-
Photoshop Crashes everytime I open it !! Please any help?!
Hello Everyone Today I downloaded a psd file and when tried to open it i got the message that the fonts need to modified or so. Anw i just hit OK and after 2 sec (i ddnt press a thing) photoshop crashed and I cant open any psd that gives me the fonts
-
Redirect system.out.println() to a file
hi all, how can i redirect all the console prints to a txt file in java application? i have used system.out oftenly in many class throught the application. is there any way to redirect all those console prints to a txt file by converting or assi
-
Hi, Could you please advise clients questions as below? 1. Client want some utilities to help them to upload Intial balances GL, Vendor, Customer, Asset. Any excel format upload. 2. They want to copy GL accounts in production system from one co code
-
How to use a non-US iPhone in the USA?
I'll be traveling in the US for 3 months, but do not want to use my Austria-based "Orange" provider's SIM card because of astronomical 'roaming' charges, especially for data. I asked my provider Orange whether they would officially sim-unlock my iPho
-
Hi All, I have a file pick and place scenario. So I am using Integrated configuration for this. But along with the target file I want to create one extra dymmy zero byte file with the same name as source file name but with file extension as *.ok How