Exchange 2013 mailbox takes a long time to connect with Outlook 2010
We just installed a 2013 CAS/Mailbox server in our Exchange 2007 environment and are running in coexistence while we migrate users over. So far I have only moved one 2007 mailbox over, a new account used for testing. Everything is working fine, OWA,
ECP, ActiveSync, etc... When connecting Outlook to a 2007 mailbox autodiscover takes a couple seconds and Outlook opens fine. The problem is when connecting Outlook to a mailbox on the 2013 server. Autodiscover takes about a minute before it finally finds
the settings and the mailbox takes about 30 seconds to open everytime. It generally times out, I click retry and the mailbox opens. Once in everything is good but the initial loading always takes a long time, double the time when opening Outlook with a shared
mailbox attached. All autodiscover is autodiscover.domain.com, Exchange 2007 is all legacymail.domain.com aside from the components that need to point to 2013. We do not have any certificate issues, well that's not true, at some time in the last couple years
someone applied a 3rd party cert to our domain.com root but not sure if that would cause this issue. Also, these are internal clients we are trying to get going with the 2013 mailbox, not external. I just applied a registry change that helped someone else
out there by disabling IPv6 for all components but that did not work for us MS KB929852. Any suggestions? Right now I am thinking of changing the internalURI for autodiscover to the FQDN of the server but wanted to see if anyone had any ideas.
Jeremy
Hi Angela, thanks for the response. I cannot post links or pictures as my account has not been verified?
The autoconfiguration tests passed, I will paste the xml below. Ping times were all under 1ms. When I entered the IP for the 2013 serve I received errors that the connection to Exchange is unavailable followed by another one that the name cannot be resolved.
I did this test by removing the Outlook profile and creating one manually without Autodiscover. I am able to ping the server by all names from the command prompt.
Our autodiscover.domain.com points to our 2013 server and the name is resolvable both internally and externally. Our certificates cover the internal server name fqdn as well as external names. I am doing all testing in the internal network.
Pinging 2013server.fqdn.com [172.16.xx.xx] with 32 bytes of data:
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Reply from 172.16.xx.xx: bytes=32 time<1ms TTL=127
Ping statistics for 172.16.xx.xx:
Packets: Sent = 13, Received = 13, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns= removing link for post, points to the schema . microsoft . com ... 2006
<Response xmlns= removing link for post, points to the schema . microsoft . com ... 2006a
<User>
<DisplayName>2013user</DisplayName>
<LegacyDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=91d6299a8d1440e6b80fcc854dc3f860-2013user</LegacyDN>
<AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
<DeploymentId>565c12be-83dc-44c7-a843-37b9bf26b9db</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<MicrosoftOnline>False</MicrosoftOnline>
<Protocol>
<Type>EXCH</Type>
<Server>[email protected]</Server>
<ServerDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
<ServerVersion>73C082C8</ServerVersion>
<MdbDN>/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
<PublicFolderServer>webmail.company.com</PublicFolderServer>
<AD>SMS-AD1-SRV11.domain.ca</AD>
<ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>off</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>webmail.company.com</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>on</ServerExclusiveConnect>
<EwsPartnerUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsPartnerUrl>
<GroupingInformation>Acheson</GroupingInformation>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://2013server.domain.ca/owa/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Fba">https://webmail.company.com/owa/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.company.com</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://webmail.company.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.company.com</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.company.com/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.company.com/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.company.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.ca</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.ca</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.ca</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.ca</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.ca</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.ca</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.ca</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.ca</EcpUrl-extinstall>
<OOFUrl>https://webmail.company.com/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.company.com/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.company.com/oab/8a3774fa-6f23-40c7-8106-707cc5b7b1b6/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
</Account>
</Response>
</Autodiscover>
Thanks,
Jeremy
Similar Messages
-
Takes a long time to connect to the internet when I first open an app
I bought my Macbook Pro Retina 13inch last weekend and I love it! Everything was working fine but over the last couple of days, when I first open an app, for example Safari, Google Chrome, iTunes, App Store, anything that requires an internet connection, it takes a long time to load up that first time, but after the first page has been loaded it works again fine until closing the app and re-opening it. When loading the App Store or iTunes it has even said an internet connection is required, even though my connection is fine and the other apps are still loading ok.
I first thought it was my WIFI connection but I have checked my router and everything seems fine, also my iPad and iPhone are still working fine with the internet.
Has anyone else had the same problem or can offer me a solution?I am getting the same issue, on first starting safari the first page takes an age to load.. once it has everything is fine.
I have tried the 'Reset Safari' function but no difference. This only happens on my Macbook Pro Retina, Using safari on my iphone or ipad is fine. (I connect via ethernet too so its not a wifi problem.)
Any one got an answer to this yet? -
Exchange 2013 (co-existence 2007) - 2013 mailbox can not connect with Outlook 2010
This was working but after some problems with third party pop3 its been broken. Grrrrrrr
OWA internally works fine for my 2013 test mailboxes. It doesn't work externally yet because I have yet to cutover to co-existence. (Still pointing to the 07 CAS externally)
Internally Outlook 2010 is working for 2007 users. But for my three test 2013 mailboxes it is not. Outlook 2010 is patched to the correct level (even tried sp2)
It finds the user name - finds the server but refuses to authenticate. I have checked the outlook anywhere url on the 2013 server and I get the correct urls- internal and external set the same. I have set the service control point for autodiscover
on 2013.
Now I haven't yet cut over externally to 2013 - and my internal urls for OWA are still set to webmail. But the legacy name exists and is set internally for all others. Authentication? basic externally NTLM internally
Where do I start looking. .Hi
Did you try running ExRCA test ?
If you have tried whats the result for EXRCA?
Do you have a valid Certificate assigned for Exchange 2013 ?
Do you have a valid cert principal Name for Exchange 2013 ?
Do you get any errors while trying to open outlook for test migrated users ?
If so can you paste the errors
You can also use test-outlookconnectivity cmdlet to test connectivity and see the results for any errors
Note :The outlook that you are using should patched with latest patch at-least with Nov 2013 patch.
Since Exchange 2013 has minimum requirement on the outlook version. Also check the authentication for Outlook Anywhere should be NTLM in co-existence mode of Exchange 2007 and 2013.
you can verify them using ps Get-OutlookAnywhere | fl and check the Authentication method for external and internal.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on www.exchangequery.com -
WE05 takes a long time and ended with error message: time out
Hello,
When user trying to use WE05 transaction it takes more time and ended with error message time out.In the WE05 tranaction even i tried with minimal search options(like for just 2hrs duration,for one day) still getting the same error.I think there must be problem in EDIDC table.
Please suggest solution for this????
Regards,
Loki.You have to enter the selection ctiteria on WE05, might be there is a huge data on these tables. So the best option is to enter the selection criteria as much as you can to get the IDOC list. Also check the sie of EDIDC table and analyse the number of IDOC on that table. Make sure that index are updated of the table
Regards,
Subhash -
Lync 2013 Client takes a long time to "restore" from taskbar
On many Windows 8 & 8.1 systems in our environment the Lync client will take anywhere from 2-10 seconds to pop up when clicked on in the taskbar. The application is running, logged in, and active. This is very frustrating to our userbase
as they will click on it multiple times and have it then act like a jackrabbit when it finally processes the requested actions.
The computers we have are brand new systems. Happens on freshly installed & updated versions of Lync 2013. Seems to be after the Lync client hasn't been clicked on, or utilized in a while. Other applications pop up instantly (zero delay)
and without any problems, it only affects Lync. I tried disabling UI animations such as fade, slide etc, which did nothing to help the issue.
This has me a bit stumped, and I'm wondering if this is a known issue or not? Hopefully there is a solution?I wouldn't say it's dismissive, I was asking for more information. I wanted to know if it was potentially an overactive endpoint protection application or something similar, if it can't be reproduced on fresh build of Windows then something is interfering
and it's difficult to work out not knowing what all is installed. Most people don't experience the issue so I imagine another piece of software may likely be conflicting.
I do agree that it's not an answer, at the least not very useful answer. Occasionally items get marked as answer but they're more of a "closed" as the original poster never responds.
I'd suggest posting your issue in the Lync 2013 forums instead as people are less likely to watch this post now that it's already marked "answered". Work through it and see what can be found, hopefully you'll find some good information which will be
more helpful to others.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Takes a long time to connect using D-Link router
I recently purchased a D-Link 802.11n router to replace my old Airport Snow, which seemed to be failing after many years. Now that I have the D-Link up and going, I have two problems:
1 - When I first start either Mail or Safari, it seems to take the router several minutes before it actually connects to the Internet.
2 - Internet access speeds seem to be slower than they were, on my wired network.
Does anyone know what may be causing these problems, especially the first one? Is there a setting I need to change, or should I just buy an AirPort Extreme or Time Capsule ?
Thanks!I am getting the same issue, on first starting safari the first page takes an age to load.. once it has everything is fine.
I have tried the 'Reset Safari' function but no difference. This only happens on my Macbook Pro Retina, Using safari on my iphone or ipad is fine. (I connect via ethernet too so its not a wifi problem.)
Any one got an answer to this yet? -
Sorry I searched as much as I could.
I have a wireless router WRT54GX2 and have 2 laptops that I use. Recently one of the laptops has started taking anywhere from 2 - 5 minutes to connect to the router, sometimes I have to restart completely. My other laptop is still working fine and picks up in seconds. I went into my network connections and set a static IP address after reading somethings online and that seemed to help but I also read keeping it set like that isn't the best way to do it. Anyone out there please help, this is drving me nuts.
I guess I should be more specific, the connection does not even try to connect, the icon just stays at the bottom with the red x on it. My wired connection works perfect as well as wireless when it finally connects.
Thanks,
B
Message Edited by on 07-29-2007 01:00 PMFirst of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
On most wireless computers, the software has a section called "Preferred Networks" (sometimes called "Profiles" ). Go to this area, and delete all networks named "linksys". Also delete any network that you do not recognize, or that you no longer use. Make sure that your current network is listed, and that it is set to automatically connect. (Note: you may need to highlight your current network, then select "Properties" or "settings" to do this.)
Hope this helps.
Message Edited by toomanydonuts on 07-30-2007 05:17 AM -
Mail takes a long time to connect to outgoing server
This has been touched upon in a number of threads but I'll post my own particular version in case anyone can throw any light on it.
When sending emails (Mail 3.6, OS10.5.8) it can take up to 1 minute for Mail to connect to the outgoing server. In the "Activity" window I get the message "Connecting to [server name]" for up to a minute, then finally Mail connects and the message goes through instantly.
This happens with any of three or four outgoing servers I have available. If I send another message immediately after the first, it is sent straight away.
I've tried the usual disk repairs, repairing permissions etc. I've thrown away Mail prefs and the Envelope Index etc. Tried with and without SSL. MY ISP can see no problem at their end and no problem with any of my settings, and other computers on the same network have no problem.
Anyone have any further ideas?
(I did post a similar problem in an earlier thread: in that case (OS10.4.11) mail would connect straight away but on sending the "100% complete" message would be shown for up to a minute. It is possible and even likely that the new behaviour is just a different manifestation of the same problem. Weird that it's still there after upgrading to OS10.5)
IanGHi,
This is a characteristic of some, but not all, ISPs, and not the SMTP itself. It involves DNS. See:
http://discussions.apple.com/thread.jspa?messageID=10391853�
Ernie -
Wifi takes long time to connect
My MacBook Air (13-inch, mid-2013) takes a long time to connect to any wi-fi network (~ 30 seconds), including known/previously connected ones. Upon wake from sleep, the network will have disconnected and will have to reconnect, again taking about 30 seconds. Also, I notice that even when the display turns off briefly, the network will still disconnect. It does not matter which network it is. However, Power Nap notifications will still show up and be up to date upon wake, suggesting that the disconnection is happening only when I wake the computer.
Things I have tried:
- removing all networks
- toggling wake for wi-fi network access and put hard disks to sleep when possible
- setting Location
- deleting all network system preference files and restarting
- resetting SMC
- restoring OS X Mavericks (10.9.3, clean install) with no recovery of network settings
Any ideas on further things to try?The latest OS X update (10.9.4) is supposed to fix some problems like yours.
-
Sqlplus takes long time to connect
Hi All,
I am using database 11.2 on Linux x86-64 platform.
Using SQLPLUS (bequeath) to connect to the database as a particular user it takes a long time to connect and connecting to the database as any other user is instantaneous.
If I use TNS names and remotely connect to the database as the same user, it fails with following error
ERROR:
ORA-03135: connection lost contact
Process ID: 0
Session ID: 0 Serial number: 0
Again I can use TNS names to connect to the database as any other user.
The profile details for the problematic user are:
PROFILE RESOURCE_NAME RESOURCE LIMIT
MONITORING_PROFILE COMPOSITE_LIMIT KERNEL DEFAULT
MONITORING_PROFILE SESSIONS_PER_USER KERNEL DEFAULT
MONITORING_PROFILE CPU_PER_SESSION KERNEL DEFAULT
MONITORING_PROFILE CPU_PER_CALL KERNEL DEFAULT
MONITORING_PROFILE LOGICAL_READS_PER_SESSION KERNEL DEFAULT
MONITORING_PROFILE LOGICAL_READS_PER_CALL KERNEL DEFAULT
MONITORING_PROFILE IDLE_TIME KERNEL DEFAULT
MONITORING_PROFILE CONNECT_TIME KERNEL DEFAULT
MONITORING_PROFILE PRIVATE_SGA KERNEL DEFAULT
MONITORING_PROFILE FAILED_LOGIN_ATTEMPTS PASSWORD UNLIMITED
MONITORING_PROFILE PASSWORD_LIFE_TIME PASSWORD DEFAULT
MONITORING_PROFILE PASSWORD_REUSE_TIME PASSWORD DEFAULT
MONITORING_PROFILE PASSWORD_REUSE_MAX PASSWORD DEFAULT
MONITORING_PROFILE PASSWORD_VERIFY_FUNCTION PASSWORD DEFAULT
MONITORING_PROFILE PASSWORD_LOCK_TIME PASSWORD DEFAULT
MONITORING_PROFILE PASSWORD_GRACE_TIME PASSWORD DEFAULT
Please help.Hi;
Please see:
ORA-03135 When Connecting to the Database [ID 404724.1]
Regard
Helios -
Exchange Online, Outlook 2013 - Copying large emails to public folders takes a long time
We are using Office 365 and when copying a large email (with attachment) to a public folder in exchange online, the copy takes a long time. Outlook does not let you do anything until it's finished coping. This is different to other folder
behavior in outlook where the sync with EO would happen in the background. Is there a way round this? It's really frustrating to copy a load of emails to a public folder.
Thanks.Hi,
I recommend you ask in office 365 forum, there are more experts to help you:
http://community.office365.com/en-us/f/default.aspx
Thanks.
Niko Cheng
TechNet Community Support -
Pull large amounts of data using odata, client API and so takes a long time in project server 2013
We are trying to pull large amounts of data in project server 2013 using both client API and odata calls, but it seem to take a long time. How is this done
In project server 2010 we did this creating SQL views in both the reporting database and for list creating a view in the content database. Our IT dept is saying we can't do this anymore. How does a view in Project database or content database create issues?
As long as we don't add a field in the table. So how's one to do this with creating a view?Hello,
If you are using Project Server 2013 on premise I would recommend using T-SQL against the dbo. schema in the Project Web Database for your reports, this will be far quicker that the APIs. You can create custom objects in the dbo. schema, see the link below:
https://msdn.microsoft.com/en-us/library/office/ee767687.aspx#pj15_Architecture_DAL
It is not supported to query the SharePoint content database directly with T-SQL or add any custom objects to the content database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads -
Sending mail take too long time exchange 2011 in iphone4
when i try to sending mail take too long time.
stay long time in outbox folder.
i'm using exchange 2011 in iphone4 with latest updates.Hi,
This is a characteristic of some, but not all, ISPs, and not the SMTP itself. It involves DNS. See:
http://discussions.apple.com/thread.jspa?messageID=10391853�
Ernie -
Aperture 3.1 takes incredibly long time to start
Since after the upgrade from 3.0.x to 3.1 Aperture takes a long time to start up. I click on the Aperture icon in the dock, the icon bounces for almost a minute, then it stays still for more than a minute, doing nothing and without the "light bulb" indicator that the app is running. It's just sitting there in the dock. After a total of 2-5 minutes, the Aperture window opens and I can start working.
I tried many things suggested in the forums to speed up Aperture:
I turned off Faces
I turned off sharing of previews with iLife and iWork
I turned off using embedded JPEGs from camera
I deleted all Aperture preferences as I thought there might be a corruption after upgrade
I removed all plugins from Aperture plugin folder to make sure nothing is interfering
I used the Aperture rebuild and repair options on the library
I created a new Aperture library and imported my photos from the old library into a fresh one
I downloaded and installed the Aperture 3.1 update again to make sure nothing got corrupted during update installation
Nothing helped. Aperture takes 2-3 minutes to fully start.
Plugins in use: NIK Software's Viveza 2 and HDR Efex Pro, Tiltshift for Aperture. That's it. And, as I said, it doesn't help if I take them out of Aperture's plugin folder so they don't get loaded. Problem still remains.
My library isn't that big: 29GB in 8230 items. Is 2-3 minutes a normal startup time?
Has anyone experienced a similar problem after upgrading? As I literally exchanged everything underneath Aperture (deleted preference files, created new library and imported photos from old lib) I don't know what else I could try. Totally uninstall Aperture and re-install it again?
Any suggestions what this could be?
On a sidenote, interestingly Logic Pro takes about the same amount of time to start. The icon bounces in the dock for almost 1 minute, then I hear the harddisk working for another minute until the splash screen finally appears. Logic Pro is loaded after 2 minutes and 20 seconds. I could boot my whole Mac 4x in that timeframe.To everybody having this problem. I found out what the culprit was. As a documentation here is what it was.
I read some posts here on the forums that mounted USB sticks or flash cards would make Aperture super slow while importing photos. I have Boot Camp installed and have a Windows 7 partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Aperture and Logic (which also had to think 2 minutes before it decided to start) display the splash screen in seconds and start like they are supposed to.
Make sure you have no drives mounted when starting these applications. This helped bringing down the starting time from 2 minutes and 20 seconds to just a few seconds. Of course, if you have your library on another drive you have to have it mounted. Maybe it only takes so long when you have Boot Camp and an NTFS partition. But if you experience lags starting these apps, try unmounting what you don't need. -
[Solved] Shutdown/Reboot takes a long time
I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
[ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
[ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
[ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
[ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
[ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
[ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
[ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
[ 0.000000] On node 0 totalpages: 2089813
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12143 pages used for memmap
[ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
[ 0.000000] Normal zone: 20448 pages used for memmap
[ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3299.649 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000025] ACPI: Core revision 20141107
[ 0.002006] ACPI: All ACPI Tables successfully acquired
[ 0.229873] Security Framework initialized
[ 0.229877] Yama: becoming mindful.
[ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.231738] Initializing cgroup subsys memory
[ 0.231741] Initializing cgroup subsys devices
[ 0.231743] Initializing cgroup subsys freezer
[ 0.231744] Initializing cgroup subsys net_cls
[ 0.231745] Initializing cgroup subsys blkio
[ 0.231759] CPU: Physical Processor ID: 0
[ 0.231759] CPU: Processor Core ID: 0
[ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.231764] mce: CPU supports 9 MCE banks
[ 0.231772] CPU0: Thermal monitoring enabled (TM1)
[ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.232422] ftrace: allocating 21171 entries in 83 pages
[ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.271688] TSC deadline timer enabled
[ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.271712] ... version: 3
[ 0.271712] ... bit width: 48
[ 0.271713] ... generic registers: 8
[ 0.271714] ... value mask: 0000ffffffffffff
[ 0.271714] ... max period: 0000ffffffffffff
[ 0.271715] ... fixed-purpose events: 3
[ 0.271715] ... event mask: 00000007000000ff
[ 0.291699] x86: Booting SMP configuration:
[ 0.291700] .... node #0, CPUs: #1
[ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.305029] #2 #3
[ 0.334799] x86: Booted up 1 node, 4 CPUs
[ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
[ 0.336656] devtmpfs: initialized
[ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
[ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
[ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
[ 0.338196] pinctrl core: initialized pinctrl subsystem
[ 0.338227] RTC time: 18:49:17, date: 04/22/15
[ 0.338286] NET: Registered protocol family 16
[ 0.349856] cpuidle: using governor ladder
[ 0.363177] cpuidle: using governor menu
[ 0.363192] ACPI: bus type PCI registered
[ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.363234] PCI: not using MMCONFIG
[ 0.363235] PCI: Using configuration type 1 for base access
[ 0.376685] ACPI: Added _OSI(Module Device)
[ 0.376686] ACPI: Added _OSI(Processor Device)
[ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.378832] ACPI: Dynamic OEM Table Load:
[ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.379146] ACPI: Interpreter enabled
[ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.379157] ACPI: Using IOAPIC for interrupt routing
[ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.381932] PCI host bridge to bus 0000:00
[ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
[ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
[ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
[ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
[ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
[ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
[ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
[ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
[ 0.383621] pci 0000:01:00.0: supports D1 D2
[ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
[ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
[ 0.383708] pci 0000:01:00.1: supports D1 D2
[ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[ 0.390139] pci 0000:03:00.0: supports D1 D2
[ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
[ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.403403] pci 0000:06:00.0: supports D1 D2
[ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.410302] vgaarb: loaded
[ 0.410303] vgaarb: bridge control possible 0000:01:00.0
[ 0.410339] PCI: Using ACPI for IRQ routing
[ 0.415815] PCI: pci_cache_line_size set to 64 bytes
[ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
[ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
[ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
[ 0.415918] NetLabel: Initializing
[ 0.415919] NetLabel: domain hash size = 128
[ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.415927] NetLabel: unlabeled traffic allowed by default
[ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.417956] Switched to clocksource hpet
[ 0.420722] pnp: PnP ACPI init
[ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420993] pnp 00:02: [dma 0 disabled]
[ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
[ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421295] pnp: PnP ACPI: found 7 devices
[ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.427107] NET: Registered protocol family 2
[ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.427422] TCP: reno registered
[ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.427479] NET: Registered protocol family 1
[ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.427703] PCI: CLS 64 bytes, default 64
[ 0.427731] Unpacking initramfs...
[ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
[ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
[ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.458503] Scanning for low memory corruption every 60 seconds
[ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.458653] Initialise system trusted keyring
[ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.459596] zpool: loaded
[ 0.459598] zbud: loaded
[ 0.459684] VFS: Disk quotas dquot_6.5.2
[ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.459788] Key type big_key registered
[ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.459910] io scheduler noop registered
[ 0.459911] io scheduler deadline registered
[ 0.459926] io scheduler cfq registered (default)
[ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.460245] vesafb: scrolling: redraw
[ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
[ 0.507010] Console: switching to colour frame buffer device 175x65
[ 0.553487] fb0: VESA VGA frame buffer device
[ 0.553501] intel_idle: MWAIT substates: 0x1120
[ 0.553502] intel_idle: v0.4 model 0x2A
[ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.553594] GHES: HEST is not enabled!
[ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.574369] Linux agpgart interface v0.103
[ 0.574402] rtc_cmos 00:03: RTC can wake from S4
[ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.574537] Intel P-state driver initializing.
[ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.575069] TCP: cubic registered
[ 0.575206] NET: Registered protocol family 10
[ 0.575527] NET: Registered protocol family 17
[ 0.576245] Loading compiled-in X.509 certificates
[ 0.576267] registered taskstats version 1
[ 0.577040] Magic number: 11:338:848
[ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
[ 0.577255] PM: Hibernation image not present or could not be loaded.
[ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.577674] Write protecting the kernel read-only data: 8192k
[ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.596674] ACPI: bus type USB registered
[ 0.596690] usbcore: registered new interface driver usbfs
[ 0.596697] usbcore: registered new interface driver hub
[ 0.596714] usbcore: registered new device driver usb
[ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.597010] ehci-pci: EHCI PCI platform driver
[ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
[ 0.598329] SCSI subsystem initialized
[ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
[ 0.601141] libata version 3.00 loaded.
[ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.607929] hub 1-0:1.0: USB hub found
[ 0.607934] hub 1-0:1.0: 2 ports detected
[ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 0.608319] hub 2-0:1.0: USB hub found
[ 0.608327] hub 2-0:1.0: 2 ports detected
[ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
[ 0.611688] hub 3-0:1.0: USB hub found
[ 0.611696] hub 3-0:1.0: 2 ports detected
[ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
[ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.621236] hub 4-0:1.0: USB hub found
[ 0.621248] hub 4-0:1.0: 2 ports detected
[ 0.621321] ahci 0000:00:1f.2: version 3.0
[ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.668448] scsi host0: ahci
[ 0.668750] scsi host1: ahci
[ 0.669100] scsi host2: ahci
[ 0.669412] scsi host3: ahci
[ 0.669697] scsi host4: ahci
[ 0.669967] scsi host5: ahci
[ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
[ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
[ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
[ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
[ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
[ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
[ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
[ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
[ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.988746] ata1.00: configured for UDMA/133
[ 0.988881] ata3.00: configured for UDMA/100
[ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
[ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.990752] ata2.00: disabling queued TRIM support
[ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
[ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.992466] ata4.00: configured for UDMA/133
[ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
[ 0.997177] ata2.00: disabling queued TRIM support
[ 1.000401] ata2.00: configured for UDMA/133
[ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
[ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
[ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
[ 1.015296] ata1.00: Enabling discard_zeroes_data
[ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
[ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.015524] ata1.00: Enabling discard_zeroes_data
[ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015779] sda: sda1 sda2
[ 1.016099] ata1.00: Enabling discard_zeroes_data
[ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.016225] sdb: sdb1
[ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.022237] sdc: sdc1 sdc2
[ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.038098] hub 1-1:1.0: USB hub found
[ 1.038285] hub 1-1:1.0: 6 ports detected
[ 1.051455] hub 4-1:1.0: USB hub found
[ 1.051648] hub 4-1:1.0: 8 ports detected
[ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.443537] systemd[1]: Detected architecture 'x86-64'.
[ 1.443740] systemd[1]: Set hostname to <arch>.
[ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
[ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
[ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.537662] systemd[1]: Reached target Remote File Systems.
[ 1.537672] systemd[1]: Starting Remote File Systems.
[ 1.537692] systemd[1]: Reached target Encrypted Volumes.
[ 1.537701] systemd[1]: Starting Encrypted Volumes.
[ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.538002] systemd[1]: Created slice Root Slice.
[ 1.538014] systemd[1]: Starting Root Slice.
[ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.538120] systemd[1]: Listening on Journal Socket.
[ 1.538134] systemd[1]: Starting Journal Socket.
[ 1.538265] systemd[1]: Created slice User and Session Slice.
[ 1.538276] systemd[1]: Starting User and Session Slice.
[ 1.545589] systemd[1]: Listening on Journal Audit Socket.
[ 1.545747] systemd[1]: Created slice System Slice.
[ 1.545765] systemd[1]: Starting System Slice.
[ 1.546248] systemd[1]: Mounting Huge Pages File System...
[ 1.546789] systemd[1]: Mounting Debug File System...
[ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
[ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
[ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.548678] systemd[1]: Starting Setup Virtual Console...
[ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.550613] systemd[1]: Starting Load Kernel Modules...
[ 1.550645] systemd[1]: Started File System Check on Root Device.
[ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.551836] systemd[1]: Created slice system-getty.slice.
[ 1.551850] systemd[1]: Starting system-getty.slice.
[ 1.551870] systemd[1]: Reached target Slices.
[ 1.551883] systemd[1]: Starting Slices.
[ 1.551931] systemd[1]: Listening on udev Kernel Socket.
[ 1.551941] systemd[1]: Starting udev Kernel Socket.
[ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.552492] systemd[1]: Starting Journal Service...
[ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.552600] systemd[1]: Listening on udev Control Socket.
[ 1.552611] systemd[1]: Starting udev Control Socket.
[ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.552689] systemd[1]: Reached target Login Prompts.
[ 1.552701] systemd[1]: Starting Login Prompts.
[ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
[ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[ 1.555736] systemd[1]: Mounting Temporary Directory...
[ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.556363] systemd[1]: Mounted Huge Pages File System.
[ 1.556388] systemd[1]: Mounted Debug File System.
[ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.557030] systemd[1]: Started Setup Virtual Console.
[ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.557431] systemd[1]: Mounted Temporary Directory.
[ 1.558591] hub 1-1.5:1.0: USB hub found
[ 1.558901] hub 1-1.5:1.0: 4 ports detected
[ 1.560366] vboxdrv: Found 4 processor cores.
[ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
[ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
[ 1.561712] systemd[1]: Started Load Kernel Modules.
[ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.569830] systemd[1]: Started udev Coldplug all Devices.
[ 1.575918] systemd[1]: Mounted FUSE Control File System.
[ 1.576374] systemd[1]: Mounting Configuration File System...
[ 1.576805] systemd[1]: Starting Apply Kernel Variables...
[ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.582712] systemd[1]: Started Rebuild Hardware Database.
[ 1.582739] systemd[1]: Started First Boot Wizard.
[ 1.582757] systemd[1]: Started Create System Users.
[ 1.583212] systemd[1]: Starting Load/Save Random Seed...
[ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.584599] systemd[1]: Mounted Configuration File System.
[ 1.587256] systemd[1]: Started Load/Save Random Seed.
[ 1.589801] systemd[1]: Started Apply Kernel Variables.
[ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
[ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
[ 1.608492] systemd[1]: Starting Local File Systems (Pre).
[ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
[ 1.637443] systemd[1]: Started udev Kernel Device Manager.
[ 1.649393] systemd[1]: Started Journal Service.
[ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
[ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.813310] ACPI: Power Button [PWRB]
[ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.813371] ACPI: Power Button [PWRF]
[ 1.817850] wmi: Mapper loaded
[ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
[ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.907839] [drm] Initialized drm 1.1.0 20060810
[ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.913064] fuse init (API version 7.23)
[ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
[ 1.914093] usbcore: registered new interface driver usblp
[ 1.916048] AVX version of gcm_enc/dec engaged.
[ 1.916050] AES CTR mode by8 optimization enabled
[ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 1.925198] usbcore: registered new interface driver usbhid
[ 1.925200] usbhid: USB HID core driver
[ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
[ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
[ 1.926137] sound hdaudioC0D1: inputs:
[ 1.926139] sound hdaudioC0D1: Front Mic=0x19
[ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
[ 1.926142] sound hdaudioC0D1: Line=0x1a
[ 1.934672] iTCO_vendor_support: vendor-support=0
[ 1.934826] [drm] radeon kernel modesetting enabled.
[ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.941825] AMD IOMMUv2 functionality not available on this system
[ 1.943447] CRAT table not found
[ 1.943449] Finished initializing topology ret=0
[ 1.943479] kfd kfd: Initialized module
[ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[ 1.943670] fb: switching to radeondrmfb from VESA VGA
[ 1.943685] Console: switching to colour dummy device 80x25
[ 1.943797] random: nonblocking pool is initialized
[ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
[ 1.943890] [drm] register mmio base: 0xFE620000
[ 1.943891] [drm] register mmio size: 131072
[ 1.943923] ATOM BIOS: CAYMAN
[ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.943977] [drm] RAM width 256bits DDR
[ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
[ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.944039] [TTM] Initializing pool allocator
[ 1.944043] [TTM] Initializing DMA pool allocator
[ 1.944058] [drm] radeon: 2048M of VRAM memory ready
[ 1.944059] [drm] radeon: 1024M of GTT memory ready.
[ 1.944068] [drm] Loading CAYMAN Microcode
[ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 1.951281] [drm] Internal thermal controller with fan control
[ 1.955166] [drm] radeon: dpm initialized
[ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
[ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.957733] intel_rapl: Found RAPL domain package
[ 1.957736] intel_rapl: Found RAPL domain core
[ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 1.979020] radeon 0000:01:00.0: WB enabled
[ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
[ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
[ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
[ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
[ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
[ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.979806] [drm] Driver supports precise vblank timestamp query.
[ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
[ 1.980067] [drm] radeon: irq initialized.
[ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
[ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
[ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
[ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
[ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
[ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
[ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
[ 2.118008] mousedev: PS/2 mouse device common for all mice
[ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
[ 2.175917] [drm] UVD initialized successfully.
[ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.328709] [drm] ib test on ring 5 succeeded
[ 2.329264] [drm] Radeon Display Connectors
[ 2.329265] [drm] Connector 0:
[ 2.329266] [drm] DP-1
[ 2.329267] [drm] HPD5
[ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 2.329268] [drm] Encoders:
[ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.329269] [drm] Connector 1:
[ 2.329270] [drm] DP-2
[ 2.329270] [drm] HPD4
[ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 2.329271] [drm] Encoders:
[ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
[ 2.329272] [drm] Connector 2:
[ 2.329273] [drm] HDMI-A-1
[ 2.329273] [drm] HPD6
[ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 2.329274] [drm] Encoders:
[ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
[ 2.329275] [drm] Connector 3:
[ 2.329276] [drm] DVI-D-1
[ 2.329276] [drm] HPD1
[ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 2.329277] [drm] Encoders:
[ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
[ 2.329278] [drm] Connector 4:
[ 2.329279] [drm] DVI-I-1
[ 2.329279] [drm] HPD3
[ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 2.329280] [drm] Encoders:
[ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
[ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.408814] [drm] fb mappable at 0xC0475000
[ 2.408816] [drm] vram apper at 0xC0000000
[ 2.408816] [drm] size 8294400
[ 2.408817] [drm] fb depth is 24
[ 2.408818] [drm] pitch is 7680
[ 2.408899] fbcon: radeondrmfb (fb0) is primary device
[ 2.435470] Console: switching to colour frame buffer device 240x67
[ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.438498] radeon 0000:01:00.0: registered panic notifier
[ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
[ 2.459456] Switched to clocksource tsc
[ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
[ 2.687833] r8169 0000:06:00.0 enp6s0: link down
[ 2.687846] r8169 0000:06:00.0 enp6s0: link down
[ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 20.764979] r8169 0000:06:00.0 enp6s0: link up
[ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 256.173829] device-mapper: uevent: version 1.0.3
[ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
[ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
[ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
[ 256.800019] raid6: sse2x1 7801 MB/s
[ 256.856622] raid6: sse2x2 11630 MB/s
[ 256.913233] raid6: sse2x4 15648 MB/s
[ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
[ 256.913235] raid6: using ssse3x2 recovery algorithm
[ 256.913829] xor: automatically using best checksumming function:
[ 256.946535] avx : 32756.400 MB/sec
[ 256.954986] Btrfs loaded
[ 603.210136] watchdog watchdog0: watchdog did not stop!
[ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
[ 603.325462] systemd-shutdown[1]: Unmounting file systems.
[ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
[ 603.402438] systemd-shutdown[1]: Deactivating swaps.
[ 603.402507] systemd-shutdown[1]: All swaps deactivated.
[ 603.402511] systemd-shutdown[1]: Detaching loop devices.
[ 603.403097] systemd-shutdown[1]: All loop devices detached.
[ 603.403101] systemd-shutdown[1]: Detaching DM devices.
[ 603.403156] systemd-shutdown[1]: All DM devices detached.
[ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
Would appreciate some input regarding this. Thanks!
EDIT: This is on gnome 3.16. Not sure if that matters.
Last edited by devrepublic (2015-05-13 03:24:19)ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
From my own experience, I can say that:
1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
6. What we committed here is a massive thread hijacking.
Last edited by Lockheed (2015-04-24 05:27:51)
Maybe you are looking for
-
Creation of new OracleConnection VERY SLOW in VS2008
Hi all, I've only found one other post regarding this issue with the latest version of the oracle data provider (2.111.6.20) on the Oracle Developer Tools for VS Forum (at: Re: Need help troubleshooting extremely slow ODT speeds in VS 2005. Figured I
-
Mail 7.2 unresponsive after upgrade to OS 10.9.2
Two days ago I upgraded Mavericks to OS 10.9.2: since then Mail's behaviour has been increasingly erratic and the app is now unusable. Nothing in the viewer window responds to clicks, so I am unable to select accounts or open individual emails. The m
-
please help!...
-
How to use rank() over(...) in a map?
I use rank() over(...) in a Filter operator validate give a error: ora-30483
-
ITunes Music store 'reviews' are not INTERNATIONAL
Can anyone tell me why reviews for albums or podcasts are only shown in the country that that review was written in? Especially PODCASTS, which are globally or universally accessable, if you are set to a specific country, you can only see reviews wri