Exchange 2013 Mailbox Using 2010 Public Folders

Firstly, we will not be migrating completely to Exchange 2013 public folders for quite a while. Our first Ex2013 server is in a small branch office and won't be appropriate to hose the PF's for the entire company. Our environment consists of
8 Ex2010 servers and now the one Ex2013. I setup a test mailbox on the 2013 server and it access a 2010 PF database on another server just fine. How is that server discovered, and can we specify which one it uses? I understand the way 2013
public folders are moving but is there a downside to leaving our configuration this way for a long period of time?

Yes, the procedure should be followed to move mailbox first. Once you have successfully moved all the mailbox to new exchange server, you can migrate public folder after that.
You can also checekout this thread related to public folder migration from exchange 2010 to 2013 :
http://social.technet.microsoft.com/Forums/exchange/en-US/b7a35a45-9b74-4910-9dc3-c997bc71f03f/migration-form-exchange2010-to-exchange2013?forum=exchangesvrdeploy
Further, for a better convenience, you can also take a look at this application (http://www.exchangemailboxmigration.com/) which would be a good approach while migrating mailboxes and public folders
between two exchange server. It ensures about the data security and email contents during the completion of entire migration process.

Similar Messages

Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence?

Hi Team,
I am in the phase of upgrading Exchange 2010 to 2013, and introduced 4 MBX and 2 CAS of 2013 servers in co-existence.
Only one production mailbox of 2010 moved to 2013. The owa of the mailbox moved to 2013, is working OK internally coz only internally configured, but when I configure outlook using 2010 settings, it got configured but when I open outlook it doesn't
open and throws an error of some "cannot open set of folders".
Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence? because I havnt configured 2013 CAS servers yet.
Kindly share some KB or tip. Any help is appreciated. Thank You.
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

I'll change Adam's wording slightly - you *MUST* install a CAS 13 server into every site where there is a MBX 13 server.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 users cannot open public folders on exchange 2010

Migrating from Exchange 2010 SP3 to Exchange 2013 CU3 in same forest and domain
client version is outlook 2013
outlook any where is disable (default) on exchange 2010 which must be disabled as organization policy
outlook any where external host name field is blank (we need to keep outlook any where disable for external)
outlook anywhere internal authentication is set to NTLM and Client require SSL to false
I have moved a mailbox from Exchange 2010 to Exchange 2013, user moved from exchange 2010 to 2013 cannot access public folder on exchange 2010. I have been stuck on this kindly suggest

Hello,
Please explain the sentence "The user moved from exchange 2010 to 2013 cannot access public folder on exchange 2010". Do you mean the moved user can't see the public folder or the user has no permission to see the public folder?
If the moved user can't see the public folder, please check if the moved user can see the public folder via owa. When you use outlook to view public folder, you can following the method: Open outlook, click folder list at the bottom of left panel.
If the user has no permission to see the public folder, please check the permission.
=============================================================
1. Open ADSIEDIT.
2. Navigation to CN=Configuration, DC=Your domain name -> CN=Services ->CN=Microsoft Exchange ->CN=Your organization name ->CN=Administrative Groups ->CN=Exchange
Administrative Group ->CN=Databases ->CN= PF Database.
3. Right-click the PF Database, and then select Properties. Under Security, check if everyone has read permission.
Besides, please check if public folder replication is ok. You can use Get-PublicFolderStatistics cmdlet to compare item count, size.
Additional article for your reference.
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Exchange 2013 User cannot view public folders

Good morning,
User was able to view public folders, then lost connection to public folders. User cannot view public folders in OWA.
Verified proper permissions. No changes have been made to the user account in AD, exchange.

Did you do a fresh install of Exchange, meaning there was no version of Exchange installed previously? If not, have you moved Public Folders over to Exchange 2013 yet? If the answer to this question is no, then you will not be able to view Public
Folders in OWA until they are migrated over Exchange 2013.

Merging existing 2013 Public Folders and 2010 Public Folders from different organization.

Following recent acquisition of another company we faced the following situation:
Company A has Exchange 2013 Organization up and running and already using new Public Folders migrated from 2010 when we upgraded.
Company B has Exchange 2010 Organization with their own PF infrastructure.
When it comes to migration, there's already public folder mailbox which was created when first migration occured.
I cant figure next steps to merge those PF infrastructures at the moment, as removing public folder mailbox prior migration is not an option, since we already have big amount of data in 2013 Organization.
Have anyone done similiar task and if so, how did you overcome this limitation?

You're looking at a third-party product. MigrationWiz does public folders. There are other cloud-based migration solutions, but I don't know whether they support public folder migrations.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange 2010 mailbox prompts for authentication to Exchange 2013 mailbox

I am in the process of a 2010 to 2013 migration. The only issue I can't seem to manage is an authentication issue with Outlook 2010. My Outlook profile consists of my Exchange 2013 mailbox and a shared mailbox on Exchange 2010. Initially, Outlook was prompting
for authentication to the Exchange 2010 mailbox. Regardless of whether I entered the correct credentials or simply cancelled the prompt, I still had full access to both mailboxes (including Public Folders on 2010). The authentication prompt was removed with
the following command:
Get-OutlookAnywhere -Server my2013exchserver | Set-OutlookAnywhere -InternalClientsRequireSsl $true
The second issue I now have is the reverse of the above: an Exchange 2010 user is prompted for authentication to an Exchange 2013 mailbox. How do I begin to troubleshoot this problem - should I run the same command (above) on 2010? I don't quite understand
how Outlook communicates with Exchange but I am thinking there is an incorrect setting on one of the Virtual Directories(?).
Many thanks.

Hi Dennis,
Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection for your Exchange 2010 mailbox with shared 2013 mailbox. The following example in my test results:
Please check your connection authentication. We can run the following command to set your Outlook Anywhere for Exchange 2013:
Set-OutlookAnywhere -Identity "E15-01\Rpc (Default Web Site)" -InternalClientAuthenticationMethod Ntlm -ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsl $True -InternalClientsRequireSsl $true
In Outlook side, please ensure the following settings in Account Settings:
In Security tab, make sure Always prompt for logon credentials is unchecked and Logon network security is set to Negotiate Authentication.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2003 to Exchange 2010 Public Folders

Hi Gurus, I’m in the process of moving public folders from Exch03 to Exch2010 and I have some clarifications before I proceed with this task. As I have understood the replication process between public folders working in a multi-master environment, I still
need some deep understanding. Okay, the task is to ensure that we don’t lose any PF when I remove the last Exch03 where there’s a lot of PF residing. From my understanding, these PFs found at Exch03 are only replicas from Exch2010. From testing I can verify
that the Outlook clients are looking at Exch2010. The way I tested this is by creating a test PF from Outlook and it did reflected on Exch2010 PF. Looking Exch03 for a couple of days, the test PF never reflected there so I'm just just assuming that there's
no replication happening between Exch2010 and Exch2010.
Please verify on this. Does it mean that Exch2010 is not replicating to Exch03?
If yes, if I remove the PFs from Exch2003 without moving the replicas first to Exch2010, like plainly removing them for decommission, will that delete/remove the PFs on Exch2010?
I have a feeling that it don’t because the PFs I’m creating/deleting at Exch03 are all replicas and I don't see any of the PFs that I deleted at Exch03 to also get deleted at Exch2010. More likely the PFs I'm creating at Exch2010 are not replication across
to Exch03 and therefore removing these PFs at Exch03 should not affect the PFs at Exch2010.
Please confirm on this before I proceed.
Note that I've already taken copy of these Exchange servers because these are all VMs.
Thanks....

Hi,
When you add Exchange 2010 to the replica list on Exchange 2003 server, it will replicate the Exchange 2003 Public Folder hierarchy and content to Exchange 2010, not from Exchange 2010 to Exchange 2003.
You can remove public folders on Exchange 2003 without affecting the public folders which have been replicated to Exchange 2010.
Before you decide to remove Exchange 2003 server, I recommend you put the Exchange 2003 server offline temporarily to check if Exchange 2010 works well.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How to introduce exchange 2013 mailbox server in an existing Exchange 2010 Environment

Hi All,
we are planning to install exchange 2013 mailbox server in an Exchange 2010 environment. we have 3 MB servers, 1 CAS 1 HUB which is installed with Exchange 2010 SP3 Enterprise Edition. how to install new exchange server 2013 and i have to add the 2013
servers in to existing DAG and migrate all mailboxes in to 2013 server. Please advise me from the scratch. also will it be create any impact in my existing setup.
Thanks, Venkatesh. "Hardwork Never Fails"

For a step by step follow the deployment assistant
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Error During Exchange 2013 Mailbox Transport Role Install On Server 2012

I was installing Exchange 2013 on Server 2012. The server is not a DC, but is a member of a domain with a 2008 R2 functional level, and I was logged in as a domain admin. There has never been an Exchange instance on this domain. I got past
the prerequisite checks, and the installer showed 15 steps, so I walked away. When I came back, I saw this:
Step 8 of 15: Mailbox role: Transport service
Error:
The following error was generated when "$error.Clear();
          $maxWait = New-TimeSpan -Minutes 8
          $timeout = Get-Date;
          $timeout = $timeout.Add($maxWait);
          $currTime = Get-Date;
          $successfullySetConfigDC = $false;
          while($currTime -le $timeout)
            $setSharedCDCErrors = @();
            try
              Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
              $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
              if($successfullySetConfigDC)
                break;
              Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
            catch
              Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
            Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
            Start-Sleep -Seconds 30;
            $currTime = Get-Date;
          if( -not $successfullySetConfigDC)
            Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "Unable to set shared config DC.".
The only option on the screen was exit, so I did. I checked the start menu, and there were two new Exchange icons, but I did not click them. I ran the installer again, and it detected an incomplete install, the only option was to click next to
finish the install, so I clicked next. This time, I eventually got the same error, except the screen showed "Step 8 of 15: Mailbox role: Transport service." I did install some Exchange 2010 prerquisites on the server before Exchange Server 2013
came out, and I can rebuild the server and try the install again if that would be best, but I thought I should post here first and try to work through this since the product is so fresh. Any suggestions?

I've tried three times since my last post, following
http://msexchange2010.info/archives/2330 as closely as possible the most recent time. I am consistently getting the same error that appears to imply I don't have write access to the domain. I don't understand this, because I am using the
same domain admin account I have been using all along. Nonetheless, here is the powershell output starting with the first Exchange setup.exe step (all other steps were already performed, all available updates were installed, and the server was rebooted
prior to this):
Windows PowerShell
Copyright (C) 2012 Microsoft Corporation. All rights reserved.
PS (domain admin home)> D:
PS D:\> .\Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema COMPLETED
The Exchange Server setup operation completed successfully.
PS D:\> .\Setup.exe /PrepareAD /OrganizationName:PRD-INC /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have b
een detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.
aspx
Configuring Microsoft Exchange Server
Organization Preparation COMPLETED
The Exchange Server setup operation completed successfully.
PS D:\> .\Setup.exe /Mode:Install /Roles:ClientAccess, Mailbox, ManagementTools /t E:\Exchange /IAcceptExchangeServe
rLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Management tools
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Client Access role: Front End Transport service
Client Access role: Client Access Front End service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Preparing Setup COMPLETED
Stopping Services COMPLETED
Copying Exchange Files COMPLETED
Language Files COMPLETED
Restoring Services COMPLETED
Language Configuration COMPLETED
Exchange Management Tools COMPLETED
Mailbox role: Transport service COMPLETED
Mailbox role: Client Access service COMPLETED
Mailbox role: Unified Messaging service COMPLETED
Mailbox role: Mailbox service FAILED
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
PS D:\>
I am cleaning out in ADSI and rebuilding the server for now, because the server is behaving oddly (not as oddly as it was with 6GiB, but oddly, nonetheless). I probably won't try to install Exchange again before tomorrow. What should I do to prevent
encountering the above again and/or if I encounter it again?

Migrate to Windows 2012 R2 and Exchange 2013 SP1 using database portability

Hi, I'm planning to migrate from Exchange 2013 SP1 running on Windows 2012 to Exchange 2013 SP1 on Windows 2012 R2.
Is it possible to use database portability to move the databases from the exchange installation on win 2012 to the new installation on Win 2012 R2? This would save a great deal of time not doing the mailbox moves.
I've searched similar cases but couldn't find any, all speak about disaster recovery and database portability but I've found no articles that uses the migration scenario.
Would it be possible to do and if so, what would the steps be? Do I need to delete the database from the source server, move the database files to the new server and mount them and relocate the mailboxes? Or should I dismount the database on the source server,
move them to the new server and mount them and relocate the mailboxes?
Frank.

Hi,
According to your description, I recommend you consider using DAG to achieve your requirement.
The following steps for your reference:
1.Prepare a new server which installed windows 2012 R2 for Exchange 2013 mailbox server.
2.After you deploy Exchange 2013 Mailbox servers, you can create a DAG, add Mailbox servers to the DAG, and then replicate mailbox databases between the DAG members.
3.After replication, you can mount all the databases on the new server.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
This no way a resolution. This won't work at all as Both OS will be different and you can't form the Cluster.
Please Unmark it!
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 mailbox name resolving vs. exchange server name (mailbox rule)

Hello guys,
I am running exchange 2007 and exchange 2013 CU7 in hybrid mode, while internal autodiscover a record is pointing to exchange 2007 client rule server.
When I configure outlook mailbox located on exchange 2007- I can use autodiscover using mail address ore resolve mailbox name vs. exchange server name.
When I configure outlook mailbox located on exchange 2013- I can configure it only using autodiscover mechanism ( email address - next- next etc.).
We are using EMC backup software which works with MAPI. Since I wasn't able to restore granular mailboxes, I contacted EMC and they claimed that it's very important to configure mailboxes resolving.
What should I check and configure to make it work?

Hi,
I think if we want to browse single mailbox by backup software, it will be regard to resolve mailbox name using server name, I suggest you contact EMC supplier to improve it.
By the way, they I type mailbox name which located on exchange 2013 server database and typing exchange 2007 cluster name, server name of exchange 2007 cluster changes automatically to exchange 2013 server on which this mailbox located.
A: first, we should make sure cluster was worked without any problem. Then make sure Exchange 2013 mailbox server was included in cluster.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2013 mailbox added to the CAS array

We are upgrading to Exchange 2013 from Exchange 2010. Following the development guide, we have
installed the first mailbox server in the Exchange 2010 environment which has 3 Exchange 2010 CAS server
in the array. When installing the mailbox role, we did not choose the client access role but after
the installation we can see that the Exchange 2013 Mailbox server is added to the CAS array and yet
we did not choose the client access role. How does this happen, and to proceed ?

I see the same thing in my lab:
Get-ClientAccessArray | FL
RunspaceId        : 16b992b3-270f-4ae1-a3c3-fa9e2ea73d69
ExchangeLegacyDN : /o=Wingtiptoys/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Ou
                    tlook.wingtiptoys.ca
Fqdn              : Outlook.wingtiptoys.ca
Site              : wingtiptoys.ca/Configuration/Sites/Default-First-Site-Name
SiteName          : Default-First-Site-Name
Members           : {EXCH-2010, EXCH-2013}
AdminDisplayName :
ExchangeVersion   : 0.1 (8.0.535.0)
Name              : Outlook.wingtiptoys.ca
DistinguishedName : CN=Outlook.wingtiptoys.ca,CN=Arrays,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administr
                    ative Groups,CN=Wingtiptoys,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=wingtiptoys,DC=ca
Identity          : Outlook.wingtiptoys.ca
Guid              : 27968af1-1624-4ff3-85c8-e38e68183afe
ObjectCategory    : wingtiptoys.ca/Configuration/Schema/ms-Exch-Client-Access-Array-2
ObjectClass       : {top, server, msExchExchangeServer, msExchClientAccessArray}
WhenChanged       : 4/12/2014 12:51:18 PM
WhenCreated       : 4/12/2014 12:51:18 PM
WhenChangedUTC    : 4/12/2014 7:51:18 PM
WhenCreatedUTC    : 4/12/2014 7:51:18 PM
OrganizationId    :
OriginatingServer : DC-1.wingtiptoys.ca
IsValid           : True
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Exchange 2013 Mailbox Role Installation Error

Hi All,
I am getting the below error when installing Exchange 2013 Mailbox Role. This is a Windows Server 2012. Previous Exchange 2013 setup was removed since it had issues with CAS. Now we have removed all previous Exchange software and attributes.
Error:
The following error was generated when "$error.Clear();
          Install-ExchangeCertificate -services IIS -DomainController $RoleDomainController
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Microsoft.Exchange.Management.Metabase.IISGeneralCOMException: An IIS directory entry couldn't be created. The error message is The system cannot find the path specified.
. HResult = -2147024893 ---> System.Runtime.InteropServices.COMException: The system cannot find the path specified.
   at System.DirectoryServices.DirectoryEntry
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.RefreshCache()
   at System.DirectoryServices.DirectoryEntry.FillCache(String propertyName)
   at System.DirectoryServices.PropertyCollection.KeysCollection.GetEnumerator()
   at Microsoft.Exchange.Management.Metabase.IisUtility.GetProperties(DirectoryEntry webObj)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.Metabase.IisUtility.GetProperties(DirectoryEntry webObj)
   at Microsoft.Exchange.Management.Metabase.IisUtility.GetWebSiteSslCertificate(String webObjectPath)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.FindIisCertificate()
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Any views on this is appreciated.
Regards
Boniface
Senior Systems Administrator

Hi,
After uninstalling the IIS, please run the following command to install prerequisites.
Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45,
Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service,
Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
Then remove the “water mark” key and “action” key under the following registry and initiate the setup again.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v15.0\HubTransportRole
In addition, please disable any third-part software for troublwshooting.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Performance counters for exchange 2013 mailbox & cas servers?

what are the Performance counters for exchange 2013 mailbox & cas servers?
similar to rpc request for troubleshooting exchange slowness, I haven't found any technet article for exchange 2013.

Hi,
Please see this:
Ask the Perf Guy: Sizing Exchange 2013 Deployments
http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx
Hope it is what you need.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 Mailbox Using 2010 Public Folders

Similar Messages

Maybe you are looking for