Exchange 2013 OWA internal only

Hi all,
Does anyone know how to restrict Exchange 2013 OWA for internal only, but can't impact Exchange ActiveSync service?
I guess IP Address and Domain Restrictions can make it, but it may impact ActiveSync.
Any good solution?
Thank,
Ian

Hi,
Based on my research, we can install the CAS and Mailbox roles in separate two servers. Then we can create new website with a unique IP and only adding ActiveSync to that website. That would give us a website hosted on the box that served the ActiveSync
devices but nothing else, leaving the OWA open for internal access. The firewall would point to this website/IP on the CAS. We could also create a virtual directory under there for /OWA and /Exchange which would serve up the generic ““this service is no longer
available, please contact the help desk” message as the default webpage
http://blogs.technet.com/b/messaging_with_communications/archive/2011/05/02/how-to-block-owa-for-external-users.aspx
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

  • Exchange 2013 OWA IM to federated users

    Hi I configured Exchange 2013 OWA IM for Lync server and everything is working fine except that I can't IM federated Lync users when the conversation is initiated from OWA. When I start an IM conversation from the federated user to my OWA, everything is
    working fine. Also the replies arrive then! So it must be something with initiating the session. I don't have issues with federated users form normal Lync desktop clients or mobile clients.
    In the lync logs I notice the following when starting the conversation from OWA:
    1027;reason="Cannot route this type of SIP request to or from federated partners";
    I also notice there's a KB2977259 (http://support.microsoft.com/kb/2977259) that discusses similar things but I'm not working with contacts like that and I guess they don't mean that you have to do this for every federated contact a Lync user has.
    Does somebody else also experience this issue?
    Update: following this KB I tried to add a new outlook contact in owa and add my sip address as "sip:[email protected]". When doing this it actually work to IM this federated user. But this is actually a workaround you can't expect your users
    to implement. I can't believe nobody else has issues with this.

    Hi DS_Kevin,
    Please post a little more log information. It seems that IM from OWA can’t locate the federated user’s SIP address without the sip prefix.
    Best Regards,
    Lisa Zheng
    Lisa Zheng
    TechNet Community Support

  • Exchange 2013 owa integration with ADFS and cooexistance with exchange 2007

    Team,
    I have successfully integrated adfs 3.0 and Exchange 2013 owa and ecp.  However, we have a coexistence environment with exchange 2007.  When you access owa, which then redirects you to adfs, sign-in, and then get redirected back to owa. If your
    mailbox is still within exchange 2007, you get a blank login page.  If you mailbox is in exchange 2013 then you successfully get the owa page for 2013.  The problem is that all exchange 2007 mailbox users get blank pages at login. So I have determined
    that exchange 2013 cas is not doing the service location lookup on the mailbox to determine if a redirect to the legacy owa address is needed.  Is there a configuration setting that I might be missing? Or does the integration with adfs and owa not support
    the much needed mailbox lookup for a coexistance environment?  A side note: if we enable FBA with owa, both login scenarios work just fine (legacy and new 2013). The legacy namespace has been created, and applied to the exchange 2007 urls.  

    Hi,
    Try using AD FS claims-based authentication with Outlook Web App and EAC
    http://technet.microsoft.com/en-us/library/dn635116(v=exchg.150).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Publish Exchange 2013 OWA + Active Sync + Outlook Anywhere using TMG 2010

    We plan to publish our new Exchange 2013 SP1 servers (3 in DAG) outside corporate network using TMG 2010. I am looking for some guide how to do it in the proper way. What I found is little old and does not take into consideration Exchange 2013
    SP1
    http://blogs.technet.com/b/exchange/archive/2012/11/21/publishing-exchange-server-2013-using-tmg.aspx
    Any advice how to publish Exchange 2013 OWA using form-based authentication and how to use Kerberos Constrained Delegation?

    Hi,
    The blog below describes some scenarios about publishing Exchange. You could have a look the Scenario 2.
    Exchange publishing after TMG/UAG
    http://dizdarevic.ba/ddamirblog/?p=168
    Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to configure Exchange 2013 OWA with Single Sign On

    Hi All ,
    How to configure Exchange 2013 OWA with Single Sign On ?
    Thanks .

    Hi,
    From your description, I am not quite sure what you really want to achieve. Could you explain it furthermore? If you need to set up Exchange 2013 OWA single sign on with Exchange 2010, here is a helpful thread for your reference.
    Exchange 2013 OWA Single Sign on with Exchange 2010
    https://social.technet.microsoft.com/Forums/en-US/2899ebfc-8622-4cdc-8d77-d76b607618f7/exchange-2013-owa-single-sign-on-with-exchange-2010?forum=exchangesvrdeploy
    If that is not your case, please feel free to tell me.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Exchange 2013 OWA/ECP HTTP 500 Internal Server Error

    So I know there are a lot of these threads, so I'll list what I've done and what I've tried so far.
    The setup is a pair of multirole servers with a DAG.  We have a root domain and sub domain.
    I've created 4 databases associated with the DAG, I successfully removed the default database on the 2nd mail server, then migrated the arbitration/system/discovery etc... mailboxes to one of the DAG databases.  I then removed the 1st mail server's default
    database after killing it's healthmailbox.  Rebooted the pair of servers and after that the ECP/OWA were inaccessible.
    To run tests I installed .NET 3.5 SP1 so I could run the ExBPA which really didn't get me anywhere.
    I can access the logon screen for both, but when I enter my username and password, I get the http 500 internal server error.
    I have used: Get-OwaVirtualDirectory -Server <server name> | fl *auth*
    To verify that basic and forms based auth are enabled, and they are.
    I've verified all services have started.
    I've tried to remove and re-add the app pools and the ecp virtual directories.
    http://social.technet.microsoft.com/Forums/ie/en-US/bb148ccb-a75e-4571-bfc7-76950f8e638e/exchange-2013-cu2-cant-access-ecp-unexpected-error-500?forum=exchangesvrgeneral
    I've tried to use ADSI Edit to purge the Canary Data.
    http://social.technet.microsoft.com/Forums/exchange/en-US/777b51ee-330d-43cc-a56e-4614d44aed7b/unable-to-access-owa-or-ecp-something-went-wrong-or-500-unexpected-error?forum=exchangesvrclients
    I've tried to run test-ecpconnectivity but stated that the test user wasn't available.
    So I tried to use the powershell script to create a new test user, but it doesn't seem to work either I think it's related to the exchange machine not being a member of the root domain, but not sure on that one.
    I seem to be able to manage everything with command-line still.  Create and remove mailboxes etc.
    As far as errors/warnings go exchange wise I get an ASP.NET 4.0 warning Event ID 1309 stating that an unhandled exception occurred, which seems to coincide with the logon attempt.  I'm sure this has something to do with it, but not real sure what yet.
     Nothing I can see within the logon attempt from IIS or anything else really.
    I think that's about all I have.

    Hi,
    Please check on the Application Pools to view whether OWA and ECP Application Pool is running on .NET Framework v4.0. It maybe the incompletely installation of Framework that causes this error.
    If so, We can try to run the following command as Administrator:
    %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
    Or change the MSExchangeECPAppPool from .NET Framework from v4.0 to v2.0. Then restart IIS to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange 2013 OWA published through TMG: Unable to preview documents with Office Web App server

    We configured our Exchange 2013 servers to use Office Web App for document previews on OWA. Everything works fine internally, and externally also when we access OWA directly. But when from an outside network we open a OWA session through TMG and try to preview
    a document, we get the error "Sorry we cannot open this document, an error occured . . ."
    Did anyone experience such an issue ?
    Thanks,
    Antonio

    Hello,
    Since directing accessing OWA from CAS is fine and the issue only occur when involving TMG, I think the issue is more related to TMG settings. Please find more efficient support
    via our TMG forum:
    http://social.technet.microsoft.com/Forums/en-US/Forefrontedgegeneral/threads
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Redirection loop detected while opening Exchange 2007 mailboxes through Exchange 2013 OWA page

    Team, in our infra Exchange 2013 CU8 & Exchange 2007 SP3 RU15 running. Exchange 2013 recently deployed but while opening exchange 2007 users mailbox through 2013 OWA getting error "Redirection loop detected". Want to update you few things :
    Public DNS record created as mail.myinfra.in with x.x.x.2 IP and legacy.myinfra.in with x.x.x.3 IP.
    Virtual directory modified mail.myinfra.in for 2013 & legacy.myinfra.in for 2007.
    All the OWA request need to pass through public DNS only no internal DNS record for OWA.
    Through ISA already rule created and tested also like https://mail.myinfra.in/owa giving me 2013 OWA page & https://legacy.myinfra.in/owa giving 2007 owa page. Only problem while opening https://mail.myinfra.in/owa with 2013 mailbox id/pwd working fine
    but with 2007 mailbox id/pwd giving error "Redirection loop detected".
    Appreciate if you can help quickly.

    Hello
    tip: check iis log on both of exch servers and check  owa  application haven't got "HTTP redirect" enabled.
    sorry my english

  • 404 can't find page Error when logging into Exchange 2013 OWA, after a refresh, login works

    Hi,
    I've upgrade two of my customers to Exchange 2013.
    On of them was coming from 2007, and the other was already running 2010.
    Migration from both of the servers went good.
    However with the customer which upgraded from 2010 to 2013 i'm experiencing strange OWA behavior:
    When I login to OWA on https://owa.contoso.com/owa, and input my credentials and click sign in: I receive this error:
    404
    can't find page :-(
    The page you're looking for couldn't be found on the server.
    X-FEServer: JVBMAIL01
    Date: 11-6-2014 11:54:48
    Fewer details..
    -> Refresh the page
    In the addressbar, the following URL is displayed: https://owa.contoso.com/owa/auth/errorFE.aspx?httpCode=404
    But... when I click: "Refresh the page" of just hit F5, the login proceeds, and my OWA is displayed and working fine.
    This behavior only happens with my customer which was upgraded from 2010 to 2013.
    The customer which i've upgraded from 2007 to 2013 doesn't experience this problem.
    I've matched the IIS settings and redirect/ssl options on both servers. They are the same.
    I've tried other users and i've experienced that on one user, the error message didn't appear.
    When I try to delete the Exchange atributes from the user, (after exporting the mail to a PST file) and re-add the Exchange attributes, the message is gone. This isn't a solotuion however, since i've got 166 users, and about 150 of them, get the error message.
    New users don't get the error.
    Anybody got any clues?

    Hi,
    From your description, I would like to verify the following thing for troubleshooting:
    Please make sure that the authentication is set to Basic Authentication and Forms Authentication is disabled on OWA and ECP virtual directly in IIS. After the above settings, please restart IIS by running IISReset /noforce command.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • LYNC 2013, Exchange 2013 / OWA presence not updating from calendar entries

    Have a test environment of LYNC 2013 and EXCHANGE 2013.
    No software clients - pure OWA access.
    IM works within OWA and I can manually set availability which is seen correctly by other users.  What does not happen is any calendar entries - they do not update the presence status (ie. does not go to busy when in a meeting ).
    I did install Lync client 2013 and that did work ( and updated OWA ) - but I want a pure web environment without the need for additional software based clients.
    Can this work?  If so is there anything that can be checked to see where the issue is?
    Thanks in advance.

    Hi,
    Maybe it's my misunderstanding. Did you mean you don’t want additional software based clients (including Lync client 2013)?
    If you don’t install a Lync client on user workstations, you cannot see presence of Lync users from OWA.
    What’s more, for Lync side, if you do not install Lync client software the only way to use Lync is Lync Web App (a browser-based meeting client). Lync Web App only support to join Lync Meetings. However, Lync meeting cannot schedule by Lync Web App and OWA.
    Here is a link about Lync Web App may help you:
    http://office.microsoft.com/en-in/lync-help/what-is-lync-web-app-HA103699740.aspx
    If you want to create Lync Meetings but don’t have Microsoft Outlook you can use Lync Web Scheduler (a web-based program)
    More details:
    http://office.microsoft.com/en-in/lync-help/lync-web-scheduler-HA103466460.aspx?CTT=5&origin=HA103699740
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 presence in Exchange 2013 OWA - 0xc3e93d6a SIPPROXY_E_CONNECTION_UNKNOWN_SERVER

    Single Lync 2013 server on Server 2012 R2
    Single Exchange 2013 server on Server 2012
    Latest patches and updates installed on both servers
    Internal Certificate Authority issued certificates
    Subject name on EX13 certificate is same as hostname and configured on SMTP, IIS, POP, IMAP, and UM services (Do I even need UM installed?)
    I have been working on this for a few days now. I have tried all the blogs and TechNet articles I could find. I even created a list of commands to configure the Exchange and Lync servers.
    **Exchange Server
    Configure-EnterprisePartnerApplication.ps1 -AuthMetaDataUrl
    https://c2nsi-svr-lync1.cantrelloffice.home/metadata/json/1 -ApplicationType Lync
    Get-ExchangeCertificate | where-object {$_.services -like “*iis*” } | fl subject, issuer, services, thumbprint
    Get-OwaVirtualDirectory -ShowBackEndVirtualDirectories -server c2nsi-svr-ex13.cantrelloffice.home | Set-OwaVirtualDirectory -InstantMessagingEnabled $true -InstantMessagingType OCS -InstantMessagingCertificateThumbprint E32937A41A7658AB8277BE6BD9BEF28D4DC43BFC
    –InstantMessagingServerName c2nsi-svr-lync1.cantrelloffice.home
    Get-OwaVirtualDirectory | Set-OwaVirtualDirectory –InstantMessagingEnabled $True -InstantMessagingType OCS
    Notepad "E:\Program Files\Exchange\V15\ClientAccess\Owa\web.config"
    <add key="IMCertificateThumbprint" value="E32937A41A7658AB8277BE6BD9BEF28D4DC43BFC" />
    <add key="IMServerName" value="c2nsi-svr-lync1.cantrelloffice.home" />
    C:\Windows\System32\Inetsrv\Appcmd.exe recycle apppool  /apppool.name:"MSExchangeOWAAppPool"
    **Lync Server
    Get-Cspool | where-object {$_.services –like “*UserServer*”} | fl site, fqdn
    Set-CsOAuthConfiguration -Identity global -Realm "cantrelloffice.home" -ExchangeAutodiscoverUrl "https://c2nsi-svr-ex13.cantrelloffice.home/autodiscover/autodiscover.svc
    New-CsPartnerApplication -identity Exchange -ApplicationTrustLevel Full -MetadataUrl
    https://c2nsi-svr-ex13.cantrelloffice.home/autodiscover/metadata/json/1
    New-CsTrustedApplicationPool -Identity c2nsi-svr-ex13.cantrelloffice.home -Registrar c2nsi-svr-lync1.cantrelloffice.home -Site CantrellOffice -RequiresReplication $False
    New-CsTrustedApplication -ApplicationId OutlookWebAccess -TrustedApplicationPoolFqdn c2nsi-svr-ex13.cantrelloffice.home -Port 5199
    Enable-CsTopology
    Anyone able to help me?

    Excerpt from OCSLogger SIPStack log file:
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026d8 (SIPStack,LiteralToIPv6Context::Clear:IPv6Literal.cpp(272))( 00000034F1EBDE60 ) Clear
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026d9 (SIPStack,LiteralToIPv6Context::Append:IPv6Literal.cpp(191))( 00000034F1EBDE60 ) Not an IPv6 literal: 192.168.1.213
    TL_NOISE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.000026da ((Shared),CSIPGenericParamList::GetParamValue:SIPGenericParam.cpp(231))( 00000034F35DFBE0 ) Enter
    TL_VERBOSE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.000026db ((Shared),CSIPGenericParamList::GetParamValue:SIPGenericParam.cpp(266))( 00000034F35DFBE0 ) Exit - param=[ms-received-ipv6] not found. Returned 0xC3E93C34(SIPPROXY_E_FIELD_NOT_EXIST)
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026dc (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(437))( 00000034F71F0438 ) Enter - current header [00000034F35DF9D8]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026dd (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(469))( 00000034F71F0438 ) Exit - returns header [0000000000000000]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026de (SIPStack,CSIPMessage::GetNextHeader<CSIPHeader>:SIPMessage.h(2545))( 00000034F71F0070 ) Exit - no more headers found
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026df (SIPStack,LiteralToIPv6Context::Clear:IPv6Literal.cpp(272))( 00000034F1EBDE60 ) Clear
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e0 (SIPStack,CSIPUrl::AppendLiteralToIPv6Mappings:SIPUrl.cpp(1659))( 00000034F35D8F10 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e1 (SIPStack,CURI::AppendLiteralToIPv6Mappings:SIPUrl.cpp(420))( 00000034F35D8F10 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e2 (SIPStack,LiteralToIPv6Context::Append:IPv6Literal.cpp(191))( 00000034F1EBDE60 ) Not an IPv6 literal: 127.0.0.1
    TL_VERBOSE(TF_COMPONENT) [1]11DC.1678::04/08/2014-01:15:49.882.000026e3 (SIPStack,CSIPRequest::ValidateInboundHeaders:SIPRequest.cpp(1612))[3583893925]( 00000034F71F0070 ) Exit
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e4 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(381))( 00000034F71F0438 ) enter. headerID[0xf]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e5 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(413))( 00000034F71F0438 ) exit. header[00000034F35DC150]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e6 (SIPStack,CMaxForwardsHeader::Parse:MaxForwardsHeader.cpp(42))( 00000034F35DC150 ) enter.
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e7 (SIPStack,CMaxForwardsHeader::Parse:MaxForwardsHeader.cpp(46))( 00000034F35DC150 ) exit. already parsed.
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026e8 (SIPStack,HeaderSigner::GatherRouteHeaders:SIPMessage.h(174))( 00000034F71F0070 ) Exit - header 00000034F35DC150 found
    TL_NOISE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.000026e9 (SIPStack,NegotiateLogic::ParseRequireHeader:NegotiateLogic.cpp(737))[1353035682]( 00000034F5E7A178 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026ea (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(381))( 00000034F71F0438 ) enter. headerID[0x23]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026eb (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(390))( 00000034F71F0438 ) exit. no headers
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026ec (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(381))( 00000034F71F0438 ) enter. headerID[0x2d]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026ed (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(413))( 00000034F71F0438 ) exit. header[00000034F35D8D00]
    TL_INFO(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.000026ee (SIPStack,NegotiateLogic::ParseRequireHeader:NegotiateLogic.cpp(758))[1353035682]( 00000034F5E7A178 ) Found legacy compression request
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026ef (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(381))( 00000034F71F0438 ) enter. headerID[0x2d]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f0 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(413))( 00000034F71F0438 ) exit. header[00000034F35D8D00]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f1 (SIPStack,CSIPMultiEntryHeader::Parse:GenericMultiEntryHeader.cpp(88))( 00000034F35D8D00 ) Unparsed is [LZ77-8K]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f2 ((Shared),FindCharNotQuoted:parseutil.cpp(975))could not find character:","(0x2c).
    TL_NOISE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f3 (SIPStack,CSIPMultiEntryHeader::Parse:GenericMultiEntryHeader.cpp(154))( 00000034F35D8D00 ) exit.
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f4 (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(437))( 00000034F71F0438 ) Enter - current header [00000034F35D8D00]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f5 (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(469))( 00000034F71F0438 ) Exit - returns header [0000000000000000]
    TL_NOISE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.000026f6 (SIPStack,NegotiateLogic::ParseRequireHeader:NegotiateLogic.cpp(846))( 00000034F5E7A178 ) Exit. Returned 0x03E93C01(SIPPROXY_S_MESSAGE_CONSUMED)
    TL_NOISE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.000026f7 (SIPStack,NegotiateLogic::ProcessPeerFeatureInfo:NegotiateLogic.cpp(1256))( 1353035682 )( 00000034F5E7A178 ) Enter - 00000034F71F0070
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f8 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(381))( 00000034F71F0438 ) enter. headerID[0x27]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026f9 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(413))( 00000034F71F0438 ) exit. header[00000034F35D8768]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026fa (SIPStack,CSIPMultiEntryHeader::Parse:GenericMultiEntryHeader.cpp(88))( 00000034F35D8768 ) Unparsed is [NewNegotiate]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026fb ((Shared),FindCharNotQuoted:parseutil.cpp(975))could not find character:","(0x2c).
    TL_NOISE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.000026fc (SIPStack,CSIPMultiEntryHeader::Parse:GenericMultiEntryHeader.cpp(154))( 00000034F35D8768 ) exit.
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026fd (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(437))( 00000034F71F0438 ) Enter - current header [00000034F35D8768]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026fe (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(469))( 00000034F71F0438 ) Exit - returns header [00000034F35D8978]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.000026ff (SIPStack,CSIPMultiEntryHeader::Parse:GenericMultiEntryHeader.cpp(88))( 00000034F35D8978 ) Unparsed is [ECC]
    TL_VERBOSE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002700 ((Shared),FindCharNotQuoted:parseutil.cpp(975))could not find character:","(0x2c).
    TL_NOISE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.00002701 (SIPStack,CSIPMultiEntryHeader::Parse:GenericMultiEntryHeader.cpp(154))( 00000034F35D8978 ) exit.
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002702 (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(437))( 00000034F71F0438 ) Enter - current header [00000034F35D8978]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002703 (SIPStack,CHeadersHash::GetNextHeader:HeadersHash.cpp(469))( 00000034F71F0438 ) Exit - returns header [0000000000000000]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002704 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(381))( 00000034F71F0438 ) enter. headerID[0x5]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002705 (SIPStack,CHeadersHash::GetHeader:HeadersHash.cpp(413))( 00000034F71F0438 ) exit. header[00000034F35DB448]
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002706 (SIPStack,CFromToHeader::Parse:FromToHeader.cpp(82))( 00000034F35DB448 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002707 (SIPStack,SIPHeaderUriParam::ParseHelper:SIPHeaderUriParam.cpp(46))( 00000034F35DB448 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002708 (SIPStack,SIPHeaderUriParam::ParseHelper:SIPHeaderUriParam.cpp(51))( 00000034F35DB448 ) Exit - already parsed
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.00002709 (SIPStack,CFromToHeader::Parse:FromToHeader.cpp(90))( 00000034F35DB448 ) Exit
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.0000270a (SIPStack,HeaderSigner::GatherRouteHeaders:SIPMessage.h(174))( 00000034F71F0070 ) Exit - header 00000034F35DB448 found
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.0000270b (SIPStack,CFromToHeader::Parse:FromToHeader.cpp(82))( 00000034F35DB448 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.0000270c (SIPStack,SIPHeaderUriParam::ParseHelper:SIPHeaderUriParam.cpp(46))( 00000034F35DB448 ) Enter
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.0000270d (SIPStack,SIPHeaderUriParam::ParseHelper:SIPHeaderUriParam.cpp(51))( 00000034F35DB448 ) Exit - already parsed
    TL_NOISE(TF_PARSE) [1]11DC.1678::04/08/2014-01:15:49.882.0000270e (SIPStack,CFromToHeader::Parse:FromToHeader.cpp(90))( 00000034F35DB448 ) Exit
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.0000270f (SIPStack,CIpAddress::SetIp:IpAddress.cpp(42))( 00000034F1EBE970 ) Enter
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002710 (SIPStack,CIpAddress::SetIp:IpAddress.cpp(55))Enter
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002711 (SIPStack,CIpAddress::SetIp:IpAddress.cpp(55))Exit - SIPRtlIpv6StringToAddress failed (WINERROR=C000000D). Returns E_FAIL
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002712 (SIPStack,CIpAddress::GetIPv4FromStringA:IpAddress.cpp(288))Enter
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002713 (SIPStack,CIpAddress::GetIPv4FromStringA:IpAddress.cpp(301))Exit - SIPRtlIpv4StringToAddress failed (WINERROR=C000000D). Returns E_FAIL
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002714 (SIPStack,CIpAddress::SetIp:IpAddress.cpp(80))( 00000034F1EBE970 ) Exit FALSE: c2nsi-svr-ex13.cantrelloffice.home is not an IP Address
    TL_NOISE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.00002715 ((Shared),CSIPGenericParamList::GetParamValue:SIPGenericParam.cpp(231))( 00000034F35DB478 ) Enter
    TL_VERBOSE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.00002716 ((Shared),CSIPGenericParamList::GetParamValue:SIPGenericParam.cpp(266))( 00000034F35DB478 ) Exit - param=[ms-fe] not found. Returned 0xC3E93C34(SIPPROXY_E_FIELD_NOT_EXIST)
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002717 (SIPStack,PeerCertificateKey::CacheDisplayName:PeerIdentityKey.cpp(450))( 00000034F5E7A198 ) Exit - cert name [c2nsi-svr-ex13.cantrelloffice.home]
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002718 (SIPStack,CPeerIdentityKey::SetDnsFqdn:PeerIdentityKey.cpp(810))( 00000034F5E7A198 ) Exit - set DNS FQDN to [c2nsi-svr-ex13.cantrelloffice.home]
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002719 (SIPStack,NegotiateLogic::ProcessPeerIdentity:NegotiateLogic.cpp(1143))( 1353035682 )( 00000034F5E7A178 ) Enter - peer=[c2nsi-svr-ex13.cantrelloffice.home]
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.0000271a (SIPStack,CConnection::ValidatePeerIdentity:Connection.cpp(544))( 1353035682 )( 00000034F5E68790 ) Enter
    TL_NOISE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.0000271b (SIPStack,CPeerIdentity::FindLogicalPeer:PeerIdentity.cpp(86))( 1353035682 )( 00000034F1906F10 ) Enter
    TL_NOISE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.0000271c (SIPStack,CPeerIdentity::LookupLogicalPeer_NonEP:PeerIdentity.cpp(124))( 1353035682 )( 00000034F1906F10 ) Enter
    TL_VERBOSE(TF_STACKTRACE) [1]11DC.1678::04/08/2014-01:15:49.882.0000271d (SIPStack,KSTImpl::QueryFirstByFqdn:KSTImpl.cpp(895))( 00000034F18FEF80 ) No matches for FQDN=[c2nsi-svr-ex13.cantrelloffice.home]
    TL_VERBOSE(TF_COMPONENT) [1]11DC.1678::04/08/2014-01:15:49.882.0000271e (SIPStack,RichResult::InternalAppendContext:RichResult.h(491))[1353035682]( 00000034F1EBE570 ) Context[0] is set to result [0xC3E93D6A(SIPPROXY_E_CONNECTION_UNKNOWN_SERVER)]
    TL_VERBOSE(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.0000271f (SIPStack,CPeerIdentity::LookupLogicalPeer_NonEP:PeerIdentity.cpp(154))( 1353035682 )( 00000034F1906F10 ) Exit - no match for the peer identity [c2nsi-svr-ex13.cantrelloffice.home]. Returned
    0xC3E93D6A(SIPPROXY_E_CONNECTION_UNKNOWN_SERVER)
    TL_ERROR(TF_NETWORK) [1]11DC.1678::04/08/2014-01:15:49.882.00002720 (SIPStack,NegotiateLogic::ProcessPeerIdentity:NegotiateLogic.cpp(1155))( 1353035682 )( 00000034F5E7A178 ) Exit - failed to validate peer with S2S FQDN. Returned 0xC3E93D6A(SIPPROXY_E_CONNECTION_UNKNOWN_SERVER)
    TL_ERROR(TF_CONNECTION) [1]11DC.1678::04/08/2014-01:15:49.882.00002721 (SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(389))[1353035682] $$begin_record
    Severity: error
    Text: The peer is not a configured server on this network interface
    Peer-IP: 192.168.1.213:14339
    Transport: TLS
    Result-Code: 0xc3e93d6a SIPPROXY_E_CONNECTION_UNKNOWN_SERVER
    Data: fqdn="c2nsi-svr-ex13.cantrelloffice.home"
    $$end_record

  • Exchange 2013 : OWA failing after login with error "HTTPS 400"

    Greetings,
    I am in phase of Upgrading my existing Exchange 2007 Infra to Exchange 2013.
    The environment is as mentioned below:
    4 Mailbox Server (DAG)
    4 CAS Servers (NLB)
    Everything has been configured and working properly, except Only one CAS server is able to pass the login request
    https://servername/owa
    Rest of all the CAS servers are failing with error "HTTPS 400" while accessing OWA
    https://localhost/owa
    Its happening only while accessing OWA, ECP works fine.
    Please let me know the fix to counter this strange issue.
    Thanks in advance.
    Regards

    Hi,
    Please check if IIS log is enabled on the CAS server, if not, please enable it.
    Then check the detailed error code from IIS logs (Path: inetpub\logs\Logfiles\W3SVC1 ) , some code like 400.1, 400.2 ect.
    Refer to this KB for more details
    http://support.microsoft.com/kb/943891
    After that, please post the OWA related login entry with error code shows 400.
    Thanks for your time and patience.
    Meanwhile, please check the OWA authentication method by command
    Get-OWAVirtualDirectory –Server “Ex2013 CAS server” | fl *authentication*
    We should set the authentication as the below:
    Get-OWAvirtualdirectory -Server “Ex2013_CAS_server” | set-OWAvirtualdirectory -windowsAuthentication $False -BasicAuthentication $True -FormsAuthentication $True
    Then perform iisreset and try to access OWA again.
    Best Regards.

  • Exchange 2013 OWA HTTP 500 error when opening another mailbox

    We have an Windows Server 2012 Exchange 2013 server with OWA. 
    All users can login fine, but when I open another mailbox with my Admin account, having enabled access to that user's mailbox, the URL redirects to /owa/auth/errorfe.aspx?httpCode=500 and shows: 
    something went wrong
    Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk
    Google won't help me in this instance. Where in the eventlog are OWA events logged?

    Hello,
    I am joining to the thread opener, however, we do not use exchange server. we are using the Cloud services through Microsoft and as far as I know, the version is 2013 wave 15 (again, through Microsoft's cloud).
    when I open the outlook, I can see the shared mailbox just fine.
    when I open the office web access, and I search the mailbox through the 'add another mailbox..' It finds it however when I press the add button I get the HTTP 500 error.
    when I tried to open a different mailbox (another shared mailbox I gave myself permissions for), it opens just fine.
    it seems (from what I can tell) it is this specific shared mailbox that I cannot open through OWA while others I can.
    when I try to open the mailbox in question through a different internet browser (Chrome) I get this Error:
    NegotiateSecurityContext failed with for host 'db3pr04mb138.eurprd04.prod.outlook.com' with status'LogonDenied'
    the error seems to be persistent on this specific mailbox only regardless to what browser I am trying to access with.
    I can only assume that the solutions you (Winnie) offered isn't relevant in my case.
    thanks in advance for any attempt to help me with this issue.

  • Exchange 2013 OWA Login Error HTTP 500

    I installed Exchange 2013 on Windows Server 2012.
    After restarting the Host I could not login into owa or ecp the login screen showed up but after entering my correct credentials I would get a
    HTTP 500 Error on https://localhost/owa/auth.owa
    The error persited after multiple reboots of the Exchange server.
    Some googling revealed to me that this might be caused by the Forms Based Authentication Serivce not running.
    But looking at the Services List I cant seem to even locate it. (I believe that the service belongs to MS-exchange 2010 only)
    Anyone got any idea why this might happen or could give me the exact name of the service or help solve the problem.
    tnx

    Hi
    Anonymous Authentication is enable and SSL is checked on but enabling those you said above gave me this error :
    challenge-based and login redirect-based authentication cannot be used simultaneously
    here is the result of executing those commands:
    Identity                      : SRV01-EX2013\ecp (Exchange Back End)
    InternalAuthenticationMethods : {Ntlm, WindowsIntegrated}
    BasicAuthentication           : False
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : SRV01-EX2013\ecp (Default Web Site)
    InternalAuthenticationMethods : {}
    BasicAuthentication           : False
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : SRV01-EX2013\owa (Exchange Back End)
    InternalAuthenticationMethods : {Ntlm, WindowsIntegrated}
    BasicAuthentication           : False
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : SRV01-EX2013\owa (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    please help !
    thank you in advance

  • Exchange 2013 - OWA "Something Went Wrong", Out of office in Outlook "Server unavailable"

    Hi,
    We have a new deployment of Exchange 2013 CU2 V2 running on a Windows 2012 server.  Everything has been running without issues and then without any real clue to why, we are now getting an issue where OWA says "Something Went Wrong" after processing
    your login, (it appears to process the login as if I type in incorrect details it tells me the password/username is wrong).
    At the same time we have also lost the ability to run the Out Of Office in Outlook which comes back saying the server is not available and we can't seem to share calendars correctly either.  (Can set Out Of Office via the Management Shell without issues).
    When running a Get-Serverhealth on the OWA.Protocol it tells me the OWASelfTestMonitor is unhealthy.
    I've tried re-creating the OWA, EWS Virtual Directorys and also the autodiscover but with no effect.  I've also restarted the server. 
    Outlook 2013 and mobile phones are working fine on the server and the Exchange Admin Centre is also working without issues.
    I am getting tempted to apply CU2 again to see if this sorts it but don't really like doing this on a server with 50 live users on it...
    In the eventlog I can see lots of the 2 errors listed below which seems to line up.  (System Log and Application Log seem to be clear of other errors or warnings.)
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 04/11/2013 11:25:00
    Event time (UTC): 04/11/2013 11:25:00
    Event ID: 2fcdb9112c794b63a9ea9577a23e4603
    Event sequence: 2
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/2/ROOT/owa-411-130280378905273269
        Trust level: Full
        Application Virtual Path: /owa
        Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\
        Machine name: SERVERNAME (I altered this for post) 
    Process information:
        Process ID: 9648
        Process name: w3wp.exe
        Account name: NT AUTHORITY\SYSTEM
    Exception information:
        Exception type: HttpException
        Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
    Lots more code.......
    AND
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 04/11/2013 11:24:24
    Event time (UTC): 04/11/2013 11:24:24
    Event ID: 2586a044b2d74b97a1095aec478bf4ae
    Event sequence: 2
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/2/ROOT/EWS-668-130280378564324526
        Trust level: Full
        Application Virtual Path: /EWS
        Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\exchweb\EWS\
        Machine name: SERVERNAME (I have changed this for post) 
    Process information:
        Process ID: 9840
        Process name: w3wp.exe
        Account name: NT AUTHORITY\SYSTEM
    Exception information:
        Exception type: HttpException
    Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
    lots more data...

    Hi Angela,
    I can't see any re-directions on the website and have certainly not set any intentionally.  I did try installing the Remote Web Gateway on the server and then found that it doesn't work on an exchange box and removed it but the server was working after
    this.
    The HTTP Redirect in Default Web Site is not showing anything set and the same for the Back End.
    The bindings on the default site all look normal with;
    http     80   127.0.0.1
    https   443  127.0.0.1
    http     80    *
    http    443   *
    The same is mirrored in the Exchange Back End site but with ports 81 and 444.
    Running the Outlook auto configure just using Autodiscover all looks good with the URLs listed all pointing to (http)://mail.mydomain.co.uk/whatever...  and the log says Autodiscover to (https)://mail.mydomain.co.uk/Autodiscover/Autodiscover.xml Suceeded
    (0x00000000)
    But, if I type in the OOF address of (https)://mail.mydomain.co.uk/EWS/exchange.asmx I get a login prompt but once user details are entered I then get;
    '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
      Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
     Exception Details: System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
    Source Error:
     An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
       System.Xml.XmlTextReaderImpl.Throw(String res, String[] args) +163
       System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace() +7572550
       System.Xml.XmlTextReaderImpl.ParseDocumentContent() +62
       System.Xml.XmlReader.ReadToFollowing(String name) +112
       Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.ReadKillBitXmlContent(XmlReader reader, Int32& refreshRate) +185
       Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.TryReadKillBitFile(Int32& refreshRate, DateTime& lastModifiedTime) +710
       Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitTimer.Start() +202
       Microsoft.Exchange.Services.Global.Application_Start(Object sender, EventArgs e) +975
    [HttpException (0x80004005): '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
       System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app) +12864205
       System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +175
       System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
       System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
       System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
    [HttpException (0x80004005): '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
       System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12880948
       System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
       System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12722137
    Really wishing I had installed Exchange 2010 at this point!!  Just can't see why its not working :(

Maybe you are looking for

  • Here is a 2 for one, On a Mac Pro 5,1 2.66ghz 6 core Xeon.

    My mac pro is developing some strangeness, now when I go to start up the machine in morning it doesnt turn on until I have hit the power button 3 times, sometimes even this doesnt do the trick so I unplug it wait a couple sec and plug back in. So far

  • IOS 8 faces are unsorted in photo app

    Since IOS8 all the faces in the photo app are unsorted. If ou have only a few faces it is no problem, but if you have several hundrets of faces, it is useless. Is there a switch to change this, which I didn't find? regard Harry

  • IPhone as a hotspot

    How do I setup my iPhone 5 as a hotspot?

  • That blogging dancer commercial

    in that iphone blogging dancer commercial she says that she takes backstage pictures with her iphone and then she implies that she uploads them to her dancing blog right then and there from her iphone. She calls it "mobile blogging" which I believe i

  • Deploy Forms 9i applications on Websphere Application Server Ver 6.1.1

    Can we Deploy applications developed using Forms 9i in Websphere Application Server Ver 6.1.1? Thanks in advance.