Exchange 2013 RTM, CU1, CU2 and CU3 are no longer supported.

Exchange 2013 RTM, CU1 , CU2 and CU3 are no longer supported.
Before posting a question, please ensure you are at the latest CU.
http://blogs.technet.com/b/rmilne/archive/2015/04/14/end-of-exchange-2013-rtm-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

Exchange 2010 SP1 and SP2 are no longer supported.

Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Password prompts - Exchange 2013 RTM vs. [Outlook 2007 & Outlook 2010] - Fully patched

Exchange 2013 RTM - Multi-Tenant
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
Clients using Outlook Anywhere only, not Exchange domain members.
1. Windows XP SP3 (fully patched), Outlook 2007 SP3 + Nov 2012 Patch - When launching Outlook prompts for password only once.
2. Windows 7 (fully patched), Outlook 2010 (fully patched) - When launching Outlook doesn't prompt for password.
I'm aware of this:
http://support.microsoft.com/kb/956531
The goal - Eliminate issue with password prompts for Windows XP.
Any chance resolving this? CU install? Anything else?
Thanks.
Memento Mori

Hi,
Based on my experience, the credential issue is mostly likely caused by authentication method.
And I recommend the following troubleshooting:
1. Change LmCompatibilityLevel on the windows XP client to a value of 2 or 3:
a. Click Start, click Run, type regedit in the Open box, and then press ENTER.
b. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\
c. In the pane on the right side, double-click lmcompatibilitylevel.
d. In the Value data box, type a value of 2 or 3 that is appropriate for your environment, and then click OK.
e. Exit Registry Editor.
f. Restart your computer
2. Reset the windows credential store.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

OWA receives mail long before Outlook (Exchange 2013 with Outlook 2010 and 2013)

I recently upgraded my Exchange environment to Exchange 2013 SP1. The Outlook users are now experiencing a delay when receiving email. When they do arrive they appear in batches, often 20-45 minutes after they were sent, from a mailbox on the same server.
Additionally, the mail appears instantly when you monitor the inbox using OWA. The users are experiencing this on both Outlook 2010 and 2013 clients configured in both cached and non-cached modes. This appears to be a problem with Outlook connecting to Exchange.
Any suggestion about how to correct this would be greatly appreciated. Thanks!

Hi,
From your description, when users use OWA, they can receive emails normally. But if they use Outlook 2010 or Outlook 2013, there is a delay in receiving emails.
I recommend you use the Outlook safe mode to determine whether the problem is caused by add-ins. Also, please make sure users have installed the Outlook latest Service Pack.
If the issue persist, please create a new profile and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Migration Exchange 2010 to Exchange 2013 with CAS Array and DAG

Dear All,
I am starting the migration of Exchange 2010 2 servers (CAS/Mailbox) with DAG no CAS Array to Exchange 2013 with 2 servers CAS array and 2 Mailbox servers with DAG. I read on some blogs that no requirement of CAS array on Exchange 2013. My concern how to
configure NLB on CAS servers for the client to connect.
Please guide and have any deployment guide for this, kindly share.
Thanks

Hi ,
As you said there is no use and meaning of having the cas array in exchange 2013 and also thanks a lot to Microsoft for introducing an single namespace facility in exchange 2013.
My suggestion and Microsoft recommendation should be to go with hardware load balancers for exchange 2013 rather than using the windows NLB and round robin method.
Why we need to go for HLB ?
Disadvantages
of some load balancing methods :
Windows
NLB :-
If you use Windows NLB then it can provide redundancy on server level failure and not on application level.
DNS
round robin :-
In case if we use the windows round robin method for load balancing then it wouldn't provide server level
and application level redundancy during the failures.At the Same time we need to manually adjust the DNS records during the server failure but on the client end dns caches will create the issues.
Configuring NLB for exchange 2013 :
http://msexchangeguru.com/2013/08/14/windowsnlb/
NLB configurations for exchange 2010 and 2013 will be same.
Configuring round robin for exchange 2013 :
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
Advisable method is to have the CAS and MBX roles on the same box if NLB not comes it to play.Because windows failover clustering and NLB cannot be configured on the same box.In exchange 2013 cas role is a stateless server role so there is no need to have
that role on a separate box.
Thanks & Regards S.Nithyanandham

Upgraded to OS X 10.9.4 and Safari 'is no longer supported' Also get the error when trying to run the App Store, ' PowerPC applications are no longer supported. This is on a MAC Book Air, purchased in late 2013.

Safari and the App store icons are both deactivated. I also cannot a software update check, as it gives the 'PowerPC applications are no longer supported error'
Very frustrating, cannot do anything with this laptop now. Any help is greatly appreciated.

If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

TS1741 my iPhone and iPod are no longer being seen by iTunes on my computer. Everything is up to date.

my iPhone and iPod are no longer being seen by iTunes. All software is up to date. I have tried following the fixes suggested by the support on iTunes, to no avail. my computer said that my iPhone 5 is "older" and that usb2 is not compatible with usb3 on my computer. it worked until a week ago. can someone help?

See TS1538: iOS: Device not recognized in iTunes for Windows.
tt2

I have deleted a contact on my phone, and they are no longer in my contacts list however when I go to text there name still appears as (other) is there a way of deleting them completely of my phone? - I have tried everything!!

I have deleted a contact on my phone, and they are no longer in my contacts list however when I go to text if i type in the letter there name begins with there name still appears as (other) is there a way of deleting them completely of my phone? - I have tried everything!!
I have resorted my phone, used the spring clean app - none of these work, Have I saved this number somewhere else but I just can't get to it?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them.

I installed Lion 10.7.4. Went to use Photoshop Cs and got a popup window. You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported. Is there a way of getting this to work or do I have to get the all new!

I installed Lion 10.7.4. Went to use Photoshop Cs and got a popup window. You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported. Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?

Welcome to Apple Communities
PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
1. Open Disk Utility (Applications > Utilities) and select your drive
2. Go to Partitions tab, press + button, create a new partition and press Apply
3. Insert the Snow Leopard install DVD and reboot pressing C key
4. Install it in the new partition
5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (being PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (apparently because they are PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Hi Mary and Matthew
You might find it helpful to "try before you buy" - there is a 30 day free trial offer for Office for Mac 2011, accessible from M's .com website.
You may be able to use this period to open and resave your old documents in a format that enables you to switch instead to using Apple's iWorks apps moving forward.
I initially intended to do something similar, but ended up buying Office as it provided an easier way (for me, at least) to continue working with years worth of old emails, letters, spreadsheets and other documents (from my PC days) without risking damage to their integrity, formatting, etc.

I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade

I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade, since I do not have access to the mac store as that comes with Snow Leopard? I went to Best Buy and they said neither Snow Leopard or Mountain Lion can be bought there.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreek

I am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline.

I upgraded to 10.8.4 and now it won't let me use my Epson scanner, saying "power pc applications are no longer supported." How do I make it work?

I upgraded to 10.8.4 and now I can' use my Epson scanner I get a message saying, "ou can't open the application Epson Scan apps because Power PC applications are no longer supported." I also can't synch my old Palm Pilot for the same reason.
How can I fix this?

We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge]

Exchange 2013 RTM, CU1, CU2 and CU3 are no longer supported.

Similar Messages

Maybe you are looking for