Exchange 2013 - schema prep (net assambly error)

Setup.exe /prepareschema /IAcceptExchangeserverlicenseterms
gives error: [ERROR] An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default,
so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See
http://go.microsoft.com/fwlink/?LinkId=155569 for more information. ; Any hints how to solve this?
bostjanc

Hello,
According to the above error, exchange setup file is copied from a network location. So please try to unblock "
this file came from another computer and might be blocked to help protect this computer" on properties of exchange setup file.
Please follow the Ed's suggestion to check the exchange 2013 prerequisites.
Here is an article for your reference.
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+    New-PerfCounters -DefinitionFileName $f
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
    + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
   12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible.

Exchange 2013 Schema/AD/Domain Prep/Install & Outlook 2003

Hi
I am in the process of preparing for a migration from Exchange 2010 to Exchange 2013.
75% of our users are on Outlook 2007 Sp3 / 2010
25% of our users are on Outlook 2003.
I understand that Outlook 2003 is not supported for mailboxes on 2013.
However, can I perform the schema/AD/Domain prep and Exchange 2013 install without disrupting Outlook 2003 users?
I can then work on migrating them at a later point.
Many Thanks
Steven

Hi Steven
You can safely run all the schema extensions in preparation to Exchange 2013 setup in your environment.
But when you install the first Exchange 2013 server with the CAS role things will change fast, because you are then in a mixed coexistence scenario, where Exchange 2013 will start running the
show.
The reason why Exchange 2013 does not support Outlook 2003 is documented here:
technet.microsoft.com/en-us/library/jj619283(v=exchg.150).aspx
Outlook 2003 is not supported
To connect Microsoft Outlook to Exchange 2013, the use of the Autodiscover service is required. However, Microsoft Outlook 2003 doesn’t support the use of the Autodiscover
service.
As workaround you can always have you Outlook 2003 connect over IMAP until you get Outlook upgraded.
Even so I would really recommend starting by upgrading your clients and only then consider adding the new Exchange 2013 servers to your infrastructure.
You can confirm the Exchange Server Supportability Matrix here:
technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
A very nice entry on the Exchange team blog about exchange 2013 mixed coexistence and client connectivity:
blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
And here are a couple of articles that might help you prevent some minor bumps on your project:
technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
technet.microsoft.com/en-us/library/bb125224(v=exchg.150).aspx
msexchangeguru.com/2014/03/02/e2013sp1-installationupgrade/
Hope all of this helps you make the best decision for your environment.
Best regards.

Exchange 2013 Domain Prep Fails: Setup /prepareschema, setup /PrepareAD, Setup /PrepareDomain

Whenever I try to prep for a 2013 exchange install I always get:
"earlier versions of the server roles that are installed were detected"
whenever I try to run Setup /prepareschema OR setup /PrepareAD OR Setup /PrepareDomain
I am working on a Server 2012 standard machine with Exchange 2010 currently installed. This server is a DC (bad I know), DNS, DHCP.
I am trying to prep the domain so that I can install Exchange 2013 on a VM and eventually remove Exchange 2010 from the organization altogether.
There are no other domain controlelrs in the domain. The domain started life as a SBS 2003 machine which was demoted and removed once the server 2012 box was up with exchange 2010 running.
Any help would be greatly appreciated.
Here is some info that may help:
1. PrePare Schema
Navigated an elevated command prompt to the folder with Exchange 2013 CU3.
Ran setup /PrepareSchema
This command should perform the following tasks:
A: Connects to the schema master and imports LDAP Data Interchange Format (LDIF) files to update the schema with
Exchange 2013 specific attributes. The LDIF files are copied to the Temp directory and then deleted after they are imported
into the schema.
B: Sets the schema version (ms-Exch-Schema-Verision-Pt) to a Exchange 2013 value.
This command fails with: Earlier versions of server roles that were installed were detected.
First I confirmed that administrator account for domain is a member of schema admins and enterprise admins.
Next I ran asdiedit.
I navigated to: "CN=ms-Exch-Schema-Version-Pt,CN=Schema,CN=Configuration,DC=BDA,DC=LAN"
and reviewed the current "rangeUpper" attribute.
The ms-Exch-Schema-Verision-Pt is not updated to CU3 range Upper setting.
The current range upper 14734 which means its still at Exchange 2010 SP3 settings.
In short, updaing the schema fails.
2. Prepare Active Directory
Navigated an elevated command prompt to the folder with Exchange 2013 CU3.
setup /PrepareAD [/OrganizationName:<organization name>]
This command fails with: Earlier versions of server roles that were installed were detected.
schema update version 56
I began reviewing the long, long list of the following containers and objects under
CN=<Organization Name>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<root domain>
which are required for Exchange 2013:
missing cn=Auth Configuration
missing CN=ExchangeAssistance
missing CN=Monitoring Settings
missing CN=Monitoring Settings
missing CN=Monitoring Settings
missing CN=Workload Management Settings
Checked Management role groups within the Microsoft Exchange Security Groups OU
missing Compliance Management group --- Manually created this entry
Step 3 Prepare Domain:
Navigated an elevated command prompt to the folder with Exchange 2013 CU3.
Ran setup /PrepareDomain
This command fails with: Earlier versions of server roles that were installed were detected.
confirmed the following:
ObjectVersion property fails as it is still set to Echange 2010 sp3 - 13040
You have a new global group in the Microsoft Exchange System Objects container called Exchange Install Domain Servers-DONE
The Exchange Install Domain Servers group is a member of the Exchange Servers USG in the root domain.-DONE
On each domain controller in a domain in which you will install Exchange 2013, the Exchange Servers USG has permissions
on the Domain Controller Security Policy\Local Policies\User Rights Assignment\Manage Auditing and Security Log policy.-DONE
Thanks.

Whenever I try to prep for a 2013 exchange install I always get:
"earlier versions of the server roles that are installed were detected"
Hi,
That tells us that you are trying to run the prep on your combined DC and Exchange 2010 Server - That will not work. Run it on the Server where you plan to install Exchange 2013.
It is not mandatory to run this before the actuall Exchange install - It will run automatically for you, if it hasn't been done already and if you are logged on with an account with the proper permissions.
Martina Miskovic

Exchange 2013 CU5 - Outlook Web Access - Error 9646 with HTTP - No error with HTTPS

Hello everyone
i have a strange issue which i actually do not have an idea about what is going wrong.
- Exchange 2013 CU5
- SSL Offloading enabled - Virtual directories configured accordingly
When a user logs in to OWA via HTTP - after a while he sees the inbox but does not see any mail details.
He only sees "Error: Your request can't be completed right now. Please try again later."
After a while i also get an eventlog "9646" with too many open OWA sessions for that user.
Regardless which limit i set in the registry for this - the error does come back - even with 512 sessions allowed.
Working with HTTPS instead of HTTP then EVERYTHING works fine ... ?
Any idea on this?
Actually i am totally lost ...
Best regards
Jörg
Ihr zertifizierter VMware Partner Enterprise Solution Provider, IBM Advanced Partner, Datacore Partner, Microsoft Silver Partner / Solution Provider und Microsoft Small Business Partner. HEGO Informationstechnologie GmbH Telegrafenstrasse 8 D 42929 Wermelskirchen
Geschäftsführer: Jörg Hermanns, Ralf Gogolin Amtsgericht Köln HRB 36509 Fon: +49 (0) 21 96 / 8 82 97 - 0 Fax: +49 (0) 21 96 / 8 82 97 - 23 Web: www.hego-it.com

Hi,
Please confirm if the following features are added in your server manager:
•.NET framework 4.5 -> WCF Services -> HTTP Activation
•Windows process activation service -> Process model
•Windows process activation service -> Configuration APIs
If not, please add these features. Then ran IISReset \noforce from a Command Prompt window to restart IIS service. Also recycle Application Pools in IIS manager.
For more information about the IIS Prerequisites for Exchange 2013, please check the windows feature listed in the following article:
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support

Exchange 2013 event ID 36888 SChannel error 12 and 1203

I am running Windows Server 2012 STD with Exchange 2013 installed on the same server. I know that Microsoft doesnt recommend to do this, but I had no choice. Errors are follow:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 12.
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
- System
- Provider
[ Name] Schannel
[ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID 36888
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-11-25T23:30:34.120233400Z
EventRecordID 121125
Correlation
- Execution
[ ProcessID] 1064
[ ThreadID] 20184
Channel System
Computer server
- Security
[ UserID] S-1-5-18
- EventData
AlertDesc 10
ErrorState 12
System
- Provider
[ Name] Schannel
[ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID 36888
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-11-26T05:45:22.650086300Z
EventRecordID 121230
Correlation
- Execution
[ ProcessID] 1064
[ ThreadID] 45336
Channel System
Computer SERVER
- Security
[ UserID] S-1-5-18
- EventData
AlertDesc 10
ErrorState 1203
Process ID 1064 is Isass.exe
I found somewhere that error 1203 could be ignored, but nothing about error 12.
Server is running with selfsigned SAN certificate, hosted 2 exchange domains (10 mailboxes, 5 local, 5 linked for remote domain connected via external 2 way non transitive domain trust).
Thank you very much for any advise.
Regards,
Jan
Šerý

Hi Jan,
Based on my research for the Event 36888, the issue may be caused by not standard or corrupted behavior of web browsers or users, such as user use HTTP protocol to access Exchange service which is a SSL site on port 443.
Please check whether there is a HTTP redirect configured in your IIS Manager of Exchange server. Also reset web browsers to have a try. Here are some similar thread for this issue:
https://social.technet.microsoft.com/Forums/forefront/en-US/92c63737-c2a3-41f7-8878-3b0cf5ee95ff/new-install-event-log-schannel-event-id-36888?forum=Forefrontedgegeneral
http://ficility.net/2013/10/21/exchange-2013-exchange-2010-windows-server-2012-schannel-event-id36888-1203-tlsssl-error-the-root-cause/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support

Can I run Exchange 2013 Schema more than once

I have started in installing Exchange 2013. I ran schema update using the Exchange 2013 RTM. Should I go ahead and install Exch2013 RTm and just run the updates afterwards or should I run schema update again using the Exch2013 SP1 setup.exe?

Exchange 2013 CU5 is the latest one so if you haven't installed Exchange yet, I would suggest you to run the schema update again for
CU5 and then install instead of installing RTM first...
But if something is blocking you to run Schema upgrade again currently then you can go for Exchange 2013 RTM install too, only thing is you would end up spending double time installing and upgrading and fighting with known bugs between RTM and CU5...
Blog |
Get Your Exchange Powershell Tip of the Day from here

Exchange 2013 OWA,Async,And OA error MsExchange BackEndRehydration event id 3002

Hi team,
I had issue in My Exchange system.
I had two Exchange 2013 muli role with CAS and MBX
Server A had no problem connection when client access OWA directly (https://servernamefqdn/owa)
but, theres issue when I pointing to server B OWA (https://serverBfqdn/owa). its same when outlook connect (using OA ),and Aysnc connection.
when I failed to connect OWA, theres event id 3002 MsExchange BackEndRehydration event id 3002.
the error show at Server A ( server at a good condition )
heres the error
Thanks

Hello Team,
I have a similar issue with Event ID 3002 filling up the App log on both Mailbox servers. Here is a snippet of the error. Any help is greatly appreciated. Thank you.
"Protocol /EWS failed to process request from identity DOMAIN\CASServer. Exception: Microsoft.Exchange.Security.OAuth.InvalidOAuthTokenException: The user specified by the user-context in the token is ambiguous.
   at Microsoft.Exchange.Security.OAuth.OAuthActAsUser.InternalCreateFromAttributes(OrganizationId organizationId, Boolean calledAtFrontEnd, Dictionary`2 rawAttributes, Dictionary`2 verifiedAttributes)
   at Microsoft.Exchange.Security.Authentication.BackendAuthenticator.OAuthAuthenticator.ExtractActAsUser(OrganizationId organizationId, CommonAccessToken token)
   at Microsoft.Exchange.Security.Authentication.BackendAuthenticator.OAuthAuthenticator.InternalRehydrate(CommonAccessToken token, Boolean wantAuthIdentifier, String& authIdentifier, IPrincipal& principal)
   at Microsoft.Exchange.Security.Authentication.BackendAuthenticator.Rehydrate(CommonAccessToken token, BackendAuthenticator& authenticator, Boolean wantAuthIdentifier, String& authIdentifier, IPrincipal& principal, IAccountValidationContext&
accountValidationContext)
   at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
   at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).

Exchange 2013 EMS throwing Access Denied error and Toolbox giving MMC error

Hi,
I am getting a very strange problem with an Exchange 2013 server deployed at a customer's site. After some hours of usage, EMS or Toolbox will not open and will throw below errors. However, if I restart the server, everything works fine for some hours before
the error start coming again. This does not affect mail flow or ECP but, I wonder if something is going wrong in the background and may cause a severe failure in future.
I tried hard but could not find the source of the problem.
EMS error:
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Hope someone has a solution to this.
Pramod

Hi
It can be possibly a WIN RM Issue. Run
winrm quickconfig and see whether u are able to connect
If you are unable to connect then Try reinstalling the WinRM
Import-Module ServerManager
Remove-WindowsFeatureWinRM-IIS-Ext
Add-WindowsFeatureWinRM-IIS-Ext
Also check if you have a certificate assigned to the Default Web Site - HTTPS Binding/Port 443, and Exchange
Back End web site - HTTPS binding/Port 444
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Exchange 2013 Hybrid Configuration Wizard OAuth error

Hi,
We are facing following error when we run OAuth configuration after complete the Hybrid Configuration Wizard.
Error:
ScenarioFailureException
Message:
Exchange OAuth authentication couldn‎'t find any accepted domains in your on-premises organization.
Verify you‎'ve configured at least one on-premises accepted domain.
Location:
   at Microsoft.Online.CSE.HRC.Activities.OAuthActivities.GetCertificateActivity.Run‎()‎
   at Microsoft.Online.CSE.HRC.Workflow.Activity.WorkflowBaseActivity.Launch‎()‎
   at Microsoft.Online.CSE.HRC.Workflow.Runtime.WorkflowActivityHelper.Execute‎(ActivityContext context, Boolean launch)‎
   at System.Activities.NativeActivity.InternalExecute‎(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)‎
   at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody‎(ActivityExecutor executor, BookmarkManager bookmarkManager,
Location resultLocation)‎
Environment:
2x Exchange 2013 CU6 (DAG+one ClientAccess)
Directory Sync Server
No ADFS server since we don't need single sign on
Office 365 E3 Tenant
We have tried manually setup the OAuth configuration according to the below TechNet article but failed when running the ExportAuthCert.ps1
script file. It couldn't match the certificate thumbprint with the location "Cert:\LocalMachine\My"
http://technet.microsoft.com/en-us/library/dn594521%28v=exchg.150%29.aspx
Please help!
Thanks in Advance
Roshan

We have the exact same Issue, tried the exact same setup and NO JOY!! - any resolution yet?
Also found this article:
http://consulting.risualblogs.com/blog/2014/09/10/exchange-2013-cu6-hybrid-users-with-o365-unable-to-query-freebusy-for-on-premises-users/comment-page-1/#comment-5192
..... but did not fix the free/busy
Best Regards,
Francois

Exchange 2013 Services pack 1 installation Error

Hey Guys ,
I'm facing an issue while installing exchange 2013 on server 2012 R2 , below are the details . I'm installing it on test bed however i'm failing at organisation preparation stage.
Error:
The following error was generated when "$error.Clear();
install-RuleCollection -Name:"ClassificationDefinitions" -DomainController $RoleDomainController;
New-ClassificationRuleCollection -InstallDefaultCollection
" was run: "Unable to continue processing classification rule collection payload for decryption or further validations. Payload may contain invalid data.".
Please Help me
Sandy Carlos

Hi,
I got a error when i run this command
Setup.exe /PrepareAD /OrganizationName:<name> /IAcceptExchangeServerLicenseTerms
then i got a error
on Organization Configuration Step.
and i got same error when run the setup when setup is going for Organization Preparation.
Thanks

Exchange 2013 CU2 to CU3 upgrade error

I'm getting this error when running an Exchange 2013 CU2 to CU3 upgrade. Please help!
Error:
The following error was generated when "$error.Clear();
$keyPath = "HKLM:\Software\Microsoft\WebManagement\Server";
if (!(Get-Item $keyPath -ErrorAction SilentlyContinue))
New-Item $keyPath -Force
Set-ItemProperty -path $keyPath -name "EnableRemoteManagement" -value 0x1 -Type DWORD -Force;
if (Get-Service WMSVC* | ?{$_.Name -eq 'WMSVC'})
Set-Service WMSVC -StartupType Automatic
Stop-SetupService -ServiceName WMSVC;
Start-SetupService -ServiceName WMSVC
" was run: "Service 'WMSVC' failed to reach status 'Running' on this server.".

if (Get-Service WMSVC* | ?{$_.Name -eq 'WMSVC'})
Set-Service WMSVC -StartupType Automatic
Stop-SetupService -ServiceName WMSVC;
Start-SetupService -ServiceName WMSVC
" was run: "Service 'WMSVC' failed to reach status 'Running' on this server.".
Is the certificate for Web Management Service (WMSvc) missing?
If so, then you need to create a new one and assign it to the feature "Management Service" in IIS.
Martina Miskovic

EXCHANGE 2013 - ECP AND OWA INTERNAL ERROR 500 - NEW INSTALL

Really hoping someone can help me here.
I first installed 2012 OS and 2013 exchange and users were getting 'Unable to open your default folder' when trying to open outlook. After much googling and nothing working I decided to put 2008 R2 on the server with 2013 Exchange. Now i am running into massive
issues.
Firstly i get Internal Errror 500 after putting in credentials for ECP and OWA. I did notice that it is also defaulting straight to this URL after entering password https://localhost/owa/auth.owa
I check the management shell and that connects without any issues. I also logged on to a computer to see what it did. After autodiscover it is not able to log onto server and then it looks like it is look for the old server information from previous server.
Any help would be appreciated. Can i do another reinstall of OS and how am i meant to remove the previous data that it seems the server has found?

Hi,
According to your description, I understand that cannot login internal ECP\OWA with error 500, also autodiscover failed.
If I misunderstand your concern, please do not hesitate to let me know.
I notice that autodiscover “looks like it is look for the old server information from previous server”, have you installed multiple version Exchange in your environment?
Please run below command to double check the virtual directory configuration:
Get-OutlookAnywhere | FL Identity,*Host*,*Auth*
Get-OwaVirtualDirectory | FL Identity,*url*,*auth*
Get-EcpVirtualDirectory | FL Identity,*url*,*auth*
Get-WebServicesVirtualDirectory | FL Identity,*url*,*auth*
Get-ClientAccessServer | FL Identity,*URI*,*auth*
Then, open IIS and check on the Application Pools to view whether MSExchangeOWAAppPool and MSExchangeECPAppPool is running on .NET Framework v4.0, and recycle virtual directory for test.
Additional, here’s a thread about “Removing Old Exchange and installing a new one”, for your reference:
https://social.technet.microsoft.com/forums/exchange/en-US/46ca107c-7ece-4da7-8aea-46b705793f37/removing-old-exchange-and-installing-a-new-one
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Exchange 2013 - Some messages net being delivered with shared SMTP Address Space

Hi
I am having a problem with some internal messages intermittently not being delivered. When I go to the Exchange ECP -->Mail Flow -->Delivery Reports I can see the following error with the message:
Submitted
2013-03-07 11:36 AM EXCHANGE
The message was submitted to exchange.******.local.
Pending
2013-03-07 11:36 AM exchange.******.local
Message was received by exchange.******.local from Exchange.******.local.
Failed
2013-03-07 11:36 AM exchange.********.local
The domain name in the email address is incorrect. Check the address.
554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain
However, usually just waiting a few minutes and then sending to the same recipient, the message will be delivered:
Submitted
2013-03-07 11:41 AM EXCHANGE
The message was submitted to exchange.******.local.
Pending
2013-03-07 11:41 AM exchange.******.local
Message was received by exchange.******.local from Exchange.******.local.
2013-03-07 11:41 AM exchange.******.local
The message has been transferred from exchange.******.local to Exchange.******.local.
Delivered
2013-03-07 11:41 AM exchange.******.local
The message was successfully delivered.
I have setup an Accepted Domain as Internal Relay, with a Send Connector to deliver any mails if the user is not found in Exchange server.

Hi All
I had this issue as well.
Here is the solution i used to fix this once for all:
My Environment:
AD server with private and public NICs
Exchange Server with Private and Public NICs
Used a dummy domain (Not owned by me) (ex: corp.com) on Private Network.
Created accepted domains for the domains that i own on exchange server.
Issue Cause:
When an external user (Gmail, hotmail.. etc) sends an email to my accepted domain, as the MX record is pointed to my exchange server on the public IP, the mail flows till my exchange server. Now the transport service on the CAS, hand's over the email to
Transport Service on the Mail box server. There it goes to the categorizer. Here the DNS look up happens and the next SMTP send service will either hand over the mail to the Mail box or send a Non delivery report stating that a mail box, domain name is not
found with in itself.
The issue here is caused by our private DNS where it fails to resolve the internal dummy domain that i used because the resources on the DNS server was completely utilized my memory ballooning in VMware. Ignore the ballooning thing if you do not understand.
Resolution:
I created an entry in the C:\Windows\System32\Drivers\etc\hosts file of the exchange server as below:
mail01.corp.com 192.168.80.132 .i.e., <host name of the exchange server>.<domain prefix>.<domain suffix> <Private IP address of the exchange server>
I change the secondary DNS on the Private NIC of the exchange server to itself .i.e., 192.168.80.132 and forced it look within itself when the primary DNS does not respond at times.
Now my exchange server is absolutely stable. It worked for me !
Hope this post helps you fix the issue or at least help you think a bit ahead.
To understand more about your scenario, i would suggest you look up the logs at C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\Logs (if you have not changed the default drectory while instalation) and Frontend Connectivity logs and Mailbox
connectivity logs. I am sure those logs will help you understand whats going wrong behind the scenes.

Exchange 2013 CU7 ECP 500 Unexpected Error

I get the error "500 Unexpected Error" when i try to Login to the Exchange ECP. but OWA is normal,
Plese help me.
Exchange error log:
System.Configuration.ConfigurationErrorsException: “”(hexadecimal value 0x03)is an invalid character. Line 1, position 1 (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config line 1) ---> System.Xml.XmlException: “”(hexadecimal
value 0x03)is an invalid character. Line 1, position 1
System.Xml.XmlTextReaderImpl.Throw(String res, String[] args)
System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
System.Xml.XmlTextReaderImpl.ParseDocumentContent()
System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)
System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
System.Web.Configuration.RuntimeConfig.get_Authorization()
System.Web.Security.UrlAuthorizationModule.IsUserAllowedToPath(HttpContext context, VirtualPath virtualPath)
System.Web.SiteMapProvider.IsAccessibleToUser(HttpContext context, SiteMapNode node)
Microsoft.Exchange.Management.ControlPanel.EacSiteMapProvider.IsAccessibleToUser(HttpContext context, SiteMapNode node)
System.Web.StaticSiteMapProvider.GetChildNodes(SiteMapNode node)
System.Web.XmlSiteMapProvider.GetChildNodes(SiteMapNode node)
Microsoft.Exchange.Management.ControlPanel._Default.CreateDataContract(SiteMapNode sNode)
Microsoft.Exchange.Management.ControlPanel._Default.CreateDataContract(SiteMapNode sNode)
Microsoft.Exchange.Management.ControlPanel._Default.CreateDataContract(SiteMapNode sNode)
Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.Web.UI.Page.ProcessRequest()
System.Web.UI.Page.ProcessRequest(HttpContext context)
System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
System.Web.Configuration.RuntimeConfig.get_Authorization()
System.Web.Security.UrlAuthorizationModule.IsUserAllowedToPath(HttpContext context, VirtualPath virtualPath)
System.Web.SiteMapProvider.IsAccessibleToUser(HttpContext context, SiteMapNode node)
Microsoft.Exchange.Management.ControlPanel.EacSiteMapProvider.IsAccessibleToUser(HttpContext context, SiteMapNode node)
System.Web.StaticSiteMapProvider.GetChildNodes(SiteMapNode node)
System.Web.XmlSiteMapProvider.GetChildNodes(SiteMapNode node)
Microsoft.Exchange.Management.ControlPanel._Default.CreateDataContract(SiteMapNode sNode)
Microsoft.Exchange.Management.ControlPanel._Default.CreateDataContract(SiteMapNode sNode)
Microsoft.Exchange.Management.ControlPanel._Default.CreateDataContract(SiteMapNode sNode)
Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.Web.UI.Page.ProcessRequest()
System.Web.UI.Page.ProcessRequest(HttpContext context)
System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
System.Xml.XmlException: “”(hexadecimal value 0x03)is an invalid character. Line 1, position 1
System.Xml.XmlTextReaderImpl.Throw(String res, String[] args)
System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
System.Xml.XmlTextReaderImpl.ParseDocumentContent()
System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)
System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
System.Xml.XmlTextReaderImpl.Throw(String res, String[] args)
System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
System.Xml.XmlTextReaderImpl.ParseDocumentContent()
System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)
System.Configuration.BaseConfigurationRecord.InitConfigFromFile()

Hi,
According to your description, I understand that cannot login ECP with error “500 Unexpected Error”, however OWA works fine.
I want to confirm some points, please help to collect the answers for following questions to narrow down the issue:
1. Are all account or some special accounts experience this question?
2. Is it works before?
Firstly, please run following command by EMS to double check whether all services works fine:
Test-ServiceHealth
Secondly, please open IIS manager to recycle “MSExchangeECPAppPool” or run “lodctr /r” and “iisreset” as administrator in cmd on all exchange servers.
Additional, we can rebuild the ECP virtual directories, for your reference:
http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
If the issue still exists, we can collect the IIS log except the event warning log.
Best Regards,
Allen Wang

Exchange 2013 - schema prep (net assambly error)

Similar Messages

Maybe you are looking for