Exchange 2013 SP1 database missing?? New install of Exchange 2007 co-exist

Hi all,
Finally got Exchange 2013 SP1 installed except I am not so sure I have a database. This is installed on a Server 2008 system and is co-existing with Exchange 2007.
When I go to SERVERS and DATABASES I don't have anything listed. When I click SERVERS on the left hand pane and SERVERS at the top I see both servers, 2007 and 2013. But when I double click my new Exchange Server 2013 name I get the error:
The operation couldn't be performed because object '*\ExchangeServerName' couldn't be found on 'FirstDCName.mydomain.com'
Why would I get this error? The install itself was problematic so I am concerned something is broke.
Thank you in advance.

Hello,
Firstly, I recommend you check if the server name "*\ExchangeServerName" exists on DC via ADUC (select Computers).
Secondly, please run the get-exchangeserver | fl name cmdlet to check your exchange server name.
And then please check the exchange setup log to check if the exchange 2013 server is installed successfully. If not, please check if there is any error in setup log.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

What happend New-MailboxExportRequest cmdlet in exchange 2013 SP1 is missing?

Cmdlet New-MailboxExportRequest is not recognize cmdlet in Exchange 2013 SP1
How can i do export mailbox to pst file in exchange 2013 SP1?

You might be facing this issue because of not having the rights to execute the New-MailboxExportRequest CMDLET.
Follow the steps given below in order to export the mailboxes into PST file
1. Open the Exchange Console and run:
New-ManagementRoleAssignment -Name "Import Export PST" -SecurityGroup "Organization Management" -Role “Mailbox Import Export"
This will generate a new role group called Import Export PST to the Oranization Management group with the role Mailbox Import Export.
You should Close and Restart the Exchange Management System again so that the changes made will get reflected in the settings, otherwise you will still get the same erroriIf not
restarted. Now move to the next steps.
2. Assign “Mailbox Import Export” role to it.
3. Add Desired Users to Role Group
4. Create Network Share ( Exchange Trusted Subsystem group has read/write permission to NTFS Permissions)
5. Run PS New-MailboxExportRequest
6. Monitor New-MailboxExportRequest
Verify PST File has been created on the network Share and you are done.
If you get the same error again, then there will be some hardware or software issues due to which you are not able to export mailboxes into PST files. In that case, you can make
use of any third party tool like Stellar Phoenix EDB To PST converter, which will help you to export your exchange database files to PST files easily and quickly. You can try this software by downloading its demo directly from their site http://www.stellarinfo.com/email-repair/edb-pst-converter.php

Exchange 2013 Sp1 says that it is 'Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup'

So, I have decompressed my brand new download of Exchange 2013 SP1. This was downloaded from the link at the bottom of the post.
So to start my upgrade I have tried to start by running the schema preparation which then advises me that I am welcomed to:
'Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup'
Is this poor QA or was the incorrect file uploaded?
http://www.microsoft.com/en-us/download/details.aspx?id=41994

Hello,
Powershell need full path to file you want to run.
So you should run .\setup.exe instead of just setup.exe.
Hope this help.
Regards, Pavel.

Migrate to Windows 2012 R2 and Exchange 2013 SP1 using database portability

Hi, I'm planning to migrate from Exchange 2013 SP1 running on Windows 2012 to Exchange 2013 SP1 on Windows 2012 R2.
Is it possible to use database portability to move the databases from the exchange installation on win 2012 to the new installation on Win 2012 R2? This would save a great deal of time not doing the mailbox moves.
I've searched similar cases but couldn't find any, all speak about disaster recovery and database portability but I've found no articles that uses the migration scenario.
Would it be possible to do and if so, what would the steps be? Do I need to delete the database from the source server, move the database files to the new server and mount them and relocate the mailboxes? Or should I dismount the database on the source server,
move them to the new server and mount them and relocate the mailboxes?
Frank.

Hi,
According to your description, I recommend you consider using DAG to achieve your requirement.
The following steps for your reference:
1.Prepare a new server which installed windows 2012 R2 for Exchange 2013 mailbox server.
2.After you deploy Exchange 2013 Mailbox servers, you can create a DAG, add Mailbox servers to the DAG, and then replicate mailbox databases between the DAG members.
3.After replication, you can mount all the databases on the new server.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
This no way a resolution. This won't work at all as Both OS will be different and you can't form the Cluster.
Please Unmark it!
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 SP1 Readiness Checks: No Exchange 2007 server detected

Hi there,
We are planning to upgrade our current Exchange 2007 server with the new Exchange 2013 SP1. I have been following Exchange Server Deployment Assistant to assist me with this task. Only schema update (setup /PrepareSchema) had been done so
far. I didn’t run setup /PrepareAD command manually because I wasn’t sure if I need to provide ‘Organisation Name’ with it or not?! I have installed all of the prerequisites as noted in the Microsoft documentation.
Now, I am a bit confuse with the ‘Readiness Checks’ page during graphical user installation of Exchange 2013 SP1 setup on Windows 2012 R2. Windows 2012 R2 server has all available updates applied.
===
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
===
I get the message why setup wants to run preparation for the Ex2013 with the ‘Setup /PrepareAD’. But, why ‘No Exchange 2010 server role have been detected in this topology’?! Ok, in my case setup doesn’t detect Exchange 2007 server. Is that ok to proceed
with the installation or something else needs to be done first?
Thanks in advance.

I need Exchange guru advice here please. Since we already have Exchange 2007 SP3 RU 10 in our Windows 2008R2 Active Directory domain here I need to be 100% confident that pushing Exchange 2013 SP1 “Install” will not override our existing Ex2007 environment.
That would be a huge disaster!
Microsoft is saying that: “Microsoft Exchange Server 2013 Setup displayed this warning because
no Exchange Server 2010 or Exchange Server 2007 server roles exist in the organization.”
http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ok, I get the message about if I continue with Exchange Server 2013 installation, I won’t be able to add Exchange 2010 or Exchange 2007 servers to the organization at a future date..., and why would I need to do that anyway?!
Microsoft wording about “some solutions may require the use...” are very confusing since we will require to consider “Coexistence or migration requirements"
Perhaps, before running Exchange 2013 SP1 setup I need to run setup for preparing AD without “Organisation Name” parameter?! Something like this:
setup /PrepareAD /IAcceptExchangeServerLicenseTerms

Exchange 2013 SP1 - The attempt to search the administrator audit log failed.

During migration process from Exchange 2010 to 2013, after moving Arbitration mailbox from Exchange 2010 database to Exchange 2013 SP1 database, cmdlet Search-AdminAuditLog fails with following error.
The attempt to search the administrator audit log failed. Please try again later.
+ CategoryInfo : NotSpecified: (:) [Search-AdminAuditLog], AdminAuditLogSearchException
+ FullyQualifiedErrorId : [Server=EX2013,RequestId=517873e3-a623-4363-bfdc-e5aa23595c33,TimeStamp=29. 4. 2014
8:38:37] [FailureCategory=Cmdlet-AdminAuditLogSearchException] 2774D0CF,Microsoft.Exchange.Management.SystemConfig
urationTasks.SearchAdminAuditLog
+ PSComputerName : ex2013.domainname.local

Hi,
First, please make sure the Microsoft Exchange Search and the Microsoft Exchange Search Host Controller service are running and please run the get-mailbox -arbitration cmdlet to check the result.
Besides, please check the properties of the DiscoverySearchMailbox and verify that the homeMDB attribute is set to a mounted database.
If the steps above don't work, please try to re-create a new Discovery System Mailbox to check the result. You can refer to the following article.
Re-Create the Discovery System Mailbox
http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2013 sp1 smtp NTLM auth for child domain users

i have exchange organization with exchange 2007 sp 3 & exchange 2013 sp1.
there are all users in Exchange 2013 server (mail flow is through Exchange 2013 server)
i have single forest, 2 site (site1, site2), root domain root.local and 1 child domain ch.root.local
DC for child domain is located in site2 (dc.ch.root.local)
multirole exchange 2013 server is installed in root domain.
i am traing to configure smtp receive connector with NTLM auth and have one problem.
when user in child domain try send email through this receive connector i see in log
<,AUTH NTLM,
>,334 <authentication response>,
*,SMTPSubmit SMTPAcceptAnyRecipient BypassAntiSpam AcceptRoutingHeaders,Set Session Permissions
*,CH\user1,authenticated
*,,Setting up client proxy session failed with error: 535 5.7.3 Unable to proxy authenticated session because either the backend does not support it or failed to resolve the user
*,,"Setting up client proxy session failed with error: 451 4.4.0 Primary target IP address responded with: ""535 5.7.3 Unable to proxy authenticated session because either
the backend does not support it or failed to resolve the user."" Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 192.168.1.15:465"
but authentication is succesfull for users from root domain.
why do it can be?
Thanks.

thanks for link
at smtp receive logs (Hub transport role) i've found the next:
Client Proxy EXMAIL2013,08D134DAF6CE1C51,49,192.168.1.15:465,
*,NT AUTHORITY\SYSTEM,authenticated
>,235 <authentication response>,
<,XPROXY SID=08D130D354F520D1 IP=192.168.1.21 PORT=57085 DOMAIN=[192.168.1.21] CAPABILITIES=0 SECID=Uy0xxx...
*,,Error while looking up SamAccountName chuser: The user name or password is incorrect.\r\n
*,None,Set Session Permissions
>,250 XProxy accepted but user identity could not be obtained,

About Exchange 2013 SP1 ActiveSync MaxDocumentDataSize

Hello,
After installing Exchange 2013 SP1 Version ‎(Build 847.32)‎ on Exchange 2007 organization , the mobile devices (Android, IPad, IPhone, ...) can't receive and send attachments over 10 MB using ActiveSync. When use Exchange 2007 SP7 Server on same Active Directory,
we can send and receive attachment on same mobile devices via ActiveSync. We can send and receive attachments over 10 MB via OWA. I checked following solution for this problem but it didn't worked. Also I can see the Sync folder doesn't exist under "%ExchangeInstallPath%\ClientAccess"
but the folder located under "%ExchangeInstallPath%\FrontEnd\HttpProxy\sync"
http://technet.microsoft.com/en-us/library/hh529949%28v=exchg.150%29.aspx
I added following line under <appSettings>
<add key="MaxDocumentDataSize" value="31457280" />
Also changed following defination from 10 Mb to 30 Mb.
<httpRuntime maxRequestLength="30720" />
Does anyone know how to solve the problem on the Exchange 2013 SP1 ?
Regards
Seckin DEMIR

Hi
By Default there should be a file under this location (%ExchangeInstallPath%ClientAccess\Sync\web.config) as per the article and its nothing to do with the fronted service sync folder
When you configure redirection from a top-level directory, a web.config file may be created under <drive>\Program Files\Microsoft\Exchange Server\<version>\ClientAccess\oab
Please check this location if you could find a web.config file.If you find in this location then you can try altering the MaxDocumentDataSize values in this location and perform IIS reset and see it should work.
If at all you do not need web.config to be located in this location then you will need to remove the top level redirection
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Exchange 2013 SP1 Not Receiving e-mail

Hello,
Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working.
Exchange 2013 setup is Exchange 2013 sp1 DVD
Exchange 2010 when sending mail to external it's ok.
Exchange 2010 when sending mail to exchange 2010 users it's ok.
Exchange 2013 when sending mail to External it's ok.
Exchange 2013 when sending mail to exchange 2010 users it's ok.
or
Exchange 2010 when sending mail to exchange 2013 not working
Exchange 2013 when sending mail to Exchange 2013 not working
From internet --> SMTP GW (exh edge) --> Exchange 2010 it's ok
From Internet --> SMTP GW (exh edge) --> Exchange 2013 not working.
organization;
1 AD site and 1 PDC (2012 R2) + 3 DC (1x 2008 R2 + 2 x 2003 Server) (Windows Server 2003 domain fl)
With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 physical machine ( eth Microsoft Team Server 2012 R2 )
All server is region setting Turkey
Exchange 2010 error
451 4.7.0 Temporary server error. Please try again later. PRX4
Exchange 2013 error
451 4.4.0 primary target ip address responded with 501 5.5.4 Invalid arguments. attempted failover to alternative host, but that did not succeed. either there are no alternate host, or delivery failed to all alternate hosts. Th
thanks

Hi,
From your description, the Exchange 2013 server can't receive emails internally and externally. I recommend you follow the steps below for troubleshooting:
1. Please restart the Microsoft Exchange Frontend Transport service on CAS and the Microsoft Exchange Transport service on Mailbox and check the result.
2. Please make sure that the authentication on default receive connector is right. Here is the configuration in my environment for your reference:
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+    New-PerfCounters -DefinitionFileName $f
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
    + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
   12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible.

New DAG - 2012R2 & Exchange 2013 SP1

Hi there,
Setting up a test platform running on 2012R2 with Exchange 2013SP1, and whilst all looks ok I simply cannot add any server to a new DAG, I can create the dag without any issues and tried using DAG with an IP, and a simplified DAG without IP however simply
cannot add any of my 2 member servers with the following error;
Exchange 2013 SP1 A server-side administrative operation has failed. 'GetNetworkConfig' failed on the server. Error: The NEtworkManager has not yet initialized.
LAN - 10.21.129.111 & 112 / 24
REPLICATION - 192.168.129.111 & 112 / 24
I've checked everything! All sits on vCloud, removed ALL NICs and replaced, removed Symantec, no loss between REPL NICs, all seems fine. Not a lot in the logs other than these last results;
[2014-03-05T12:51:10] Updating 'MDB001'.MasterServerOrAvailabilityGroup to 'DAG001.
[2014-03-05T12:51:10] database[ 0 ] (MBDB01)'s MsOrDag=DAG001.
[2014-03-05T12:51:10] database[ 1 ] (MDB001)'s MsOrDag=DAG001.
[2014-03-05T12:51:10] Updated Progress 'Successfully updated the membership of server 'SRV111' in Active Directory group 'DAG001'.' 18%.
[2014-03-05T12:51:10] Working
I'm at the end of the road and cannot find anything to help me ;(

HI Jared,
I agree, have a feeling it's that bit but not sure how to check if working or re-install perhaps.
Copy status is ALL ok;
CopyQueueLength - 0
ReplayQueueLEnght - 0
ContentIndexState - Healthy
This is without DAG. For replication Health fails on last 2 points on both VMs, could it be missed failover cluster bit or didn't install correctly?
DatabaseRedundancy
DatabaseAvailability
RunspaceId       : d4597641-ae09-4687-8e66-cfbef67bc31f
Server           : SRV111
Check            : DatabaseRedundancy
CheckDescription : Verifies that databases have sufficient redundancy. If this check fails, it means that some
                   databases are at risk of losing data.
Result           : *FAILED*
Error            : Failures:
                       There were database redundancy check failures for database 'MBDB01' that may be lowering its
                   redundancy and putting the database at risk of data loss. Redundancy Count: 1. Expected Redundancy
                   Count: 2. Detailed error(s):
                           SRV111:
                           Database 'MBDB01' does not have enough copies configured to meet the validation criteria.
                       There were database redundancy check failures for database 'MDB001' that may be
                   lowering its redundancy and putting the database at risk of data loss. Redundancy Count: 1.
                   Expected Redundancy Count: 2. Detailed error(s):
                           SRV111:
                           Database 'MDB001' does not have enough copies configured to meet the validation
                   criteria.
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : d4597641-ae09-4687-8e66-cfbef67bc31f
Server           : SRV111
Check            : DatabaseAvailability
CheckDescription : Verifies that databases have sufficient availability. If this check fails, it means that some
                   databases are at risk of losing service.
Result           : *FAILED*
Error            : Failures:
                       There were database availability check failures for database 'MBDB01' that may be lowering its
                   availability. Availability Count: 0. Expected Availability Count: 2. Detailed error(s):
                           SRV111:
                           Couldn't read the database availability group for server
                   'SRV111.ad.totalitycloud.com' from Active Directory. Error: Could not find the database
                   availability group object for server SRV111 in Active Directory.
                       There were database availability check failures for database 'MDB001' that may be
                   lowering its availability. Availability Count: 0. Expected Availability Count: 2. Detailed
                   error(s):
                           SRV111:
                           Couldn't read the database availability group for server
                   'SRV111.ad.totalitycloud.com' from Active Directory. Error: Could not find the database
                   availability group object for server SRV111 in Active Directory.
Identity         :
IsValid          : True
ObjectState      : New

Exchange 2013 sp1 move databases

Hello all
I am running Exchange 2013 sp1 in a two node DAG. Originally the DAG had two under powered servers, i built two new more powerful servers added the servers to the DAG, then i moved database copies to the new servers, removed the copies from the original
servers and then removed the original servers from the DAG. The two original servers are multi role (CAS Mailbox) and currently they are still in the org. My confusion is around this. When i run get-mailbox -identity <name>. The output from the command
shows the mailbox is on oldserver. Again oldserver was removed from the DAG and no databases exist on the server. I want to remove the two old servers from the org, but i am hesitant on doing this because all mailboxes seem to think they exist on oldserver
Thanks for any help
Bulls on Parade

You can ignore that:
http://blogs.technet.com/b/timmcmic/archive/2011/09/26/exchange-2010-homemta-and-msexchhomeservername-are-not-updated-on-mailboxes.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!

Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
users works fine. The only thing I have trouble with is the ActiveSync! After migrating to the new Ex2013 server my phone stops getting new emails…, existing Ex2007 users don’t have any problems with their mobile phones.
I did ActiveSync test for my user account with ActiveSync Tester and here is what I have:
As you can see from the error above ActiveSync Tester detects ActiveSync on Ex2013 server however something wrong there with form-based auth?! I can’t see any differences in settings for ActiveSync virtual folders in Ex2007 and Ex2013
virtual folders?!
What I’m missing here?! Please help.

Check if the Exchange Servers group does not have the appropriate permission to the mailbox object in Active Directory.
To check whether inheritance is disabled on the user:
1.Open Active Directory Users and Computers.
2.On the menu at the top of the console, click View > Advanced Features.
3.Locate and right-click the mailbox account in the console, and then click Properties.
4.Click the Security tab.
5.Click Advanced.
6.Make sure that the check box for "Include inheritable permissions from this object's parent" is selected.
Ref:
http://technet.microsoft.com/en-us/library/dd439375(v=exchg.80).aspx
Also check the Virtual directory authentication
Microsoft-Server-ActiveSync
•Basic authentication
•SSL required
•Requires 128-bit encryption
Ref:
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Check the IIS log if you are able to find any error message on it
Exchange Queries

HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL

Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326

See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK

Exchange 2013 SP1 cu8 - mssing cmdlet - Get-SendConnector command missing, cannot change smart host port

Hi Everybody,
For some reason my Exchange 2013 SP1 cu8 are missing a bunch of cmdlets.
When i run the exchange powershell and get all the cmdlet command - i noticed all the send and receive connectors are missing.
This all started when i needed to change the smart host port for a client because their internet provider was blocking port 25.
So i did the traditional cmdlet
Get-SendConnector
Set-SendConnector -Indentity "connector name" -Port 551
Both commands i get "The term Get-SendConnector is not recognized as the name of a cmdlet, function, etc"
When i type Get-ExCommand
Any reference to SendConnector and ReceiveConnector are not on the list.
Am I missing somethings? This is a classic example why GUI and cmdlet functions should both be available and not just on cmdlets.
I went on other Exchange 2013 SP1 cu7 servers to see, and they all have the Send and Receive connectors in the cmdlets.
The only difference with this particular setup, is that this is the first Exchange 2013 on-premise installation with Windows 2012 r2 Small Business Essentials. However, i very much doubt the on-premise installation add-on to SBS would cause any issues
to missing cmdlets.
I searched all over the internet and found nothing.
Now my biggest fear is to re-install Exchange and import the mailboxes manually.
Any help is greatly appreciated.
MattLok

Hello
check role asigment for your user:
Get-ManagementRoleAssignment -GetEffectiveUsers | Where { $_.EffectiveUserName -Eq "administrator" }
sorry my english

Exchange 2013 SP1 database missing?? New install of Exchange 2007 co-exist

Similar Messages

Maybe you are looking for