Exchange 2013 SP1 Installation Errors I Cannot Resolve
Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -
Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Similar Messages
-
Exchange 2013 SP1 Installation Error in "Mailbox Role: Transport service"
I tried an installation last week on a Windows Server 2008 R2 but was unable to get it to work. With the value of hindsight, I am inclined to think the error was more with the Web Site making EAC unavailable. I subsequently got it installed in my personal
lab environment by creating a VM with a fresh install of Windows Server 2008 R2 SP1.
With this information I then went back to the customer's site and installed a clean version of Windows Server 2008 R2 SP1 in a virtual machine under Hyper-V. After installing all the prerequisites the install appeared to be going just fine but then in failed
in Step 7 with the following error:
The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
I know MS Exchange hides most of its information in AD so my suspicion is that the failed install on the real server has left some residual information in AD. Note that the original install on the real machine won't uninstall because the prior install attempt
hasn't finished.
The relevant part of the Exchange Setup Log is:
[07/22/2014 14:22:57.0593] [2] Active Directory session settings for 'Update-RmsSharedIdentity' are: View Entire Forest: 'True', Configuration Domain Controller: 'AWSDC.aws.local', Preferred Global Catalog: 'AWSDC.aws.local', Preferred Domain Controllers: '{
AWSDC.aws.local }'
[07/22/2014 14:22:57.0593] [2] User specified parameters: -ServerName:'EXCHANGE'
[07/22/2014 14:22:57.0593] [2] Beginning processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0031] [2] RMS Shared Identity user 'CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042,CN=Users,DC=aws,DC=local' (originating server = 'AWSDC.aws.local') is being linked to computer 'CN=EXCHANGE,CN=Computers,DC=aws,DC=local' (originating
server = 'AWSDC.aws.local').
[07/22/2014 14:22:58.0156] [2] [ERROR] Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [2] Ending processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0156] [1] The following 1 error(s) occurred during task execution:
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Microsoft.Exchange.Data.DataValidationException: Database is mandatory on UserMailbox.
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.Link()
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[07/22/2014 14:22:58.0156] [1] [ERROR] The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
[07/22/2014 14:22:58.0156] [1] [ERROR] Database is mandatory on UserMailbox.
Does anyone have suggestions about what to do with ADSI Edit to fix the problems?
I think I am getting close to having a working Exchange!!Hi,
Agree with Amit's suggestion. Please use the following cmdlet to re-home the arbitration mailbox which does not have database attribute stamped and check the result.
Set-Mailbox "FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042" -Arbitration -Database "xxx"
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Exchange 2013 SP1 prerequ errors
Current installation. 4 Exchange 2013 machines on Server 2008 R2 platform (VM with Hyper-V), all have CAS and mailbox role installed. DAG across all for servers. 2 servers
reside in main datacenter and 2 on a DR site.
The Exchange installation is at CU 2 and working.<o:p></o:p>
We have 2 domain controllers in the main datacenter (win 2008 R2) and 2 domain controllers in the DR site (Win 2012 R2).<o:p></o:p>
DCDIAG checks out fine on all. Network is fine for all.
Running SP1 installation on the Exchange servers in the DR site results in prerequisites in a bunch of errors which all stem from one root issue: <o:p></o:p>
Error:
Either Active Directory doesn't exist, or it can't be contacted.<o:p></o:p>
Running the same on the main site (DC= Win 2008 R2) completes prereq for SP1 with no errors.
So the difference is that the 2 Exchange servers on the DR site have Win 2012 R2 for their domain controllers and fail.<o:p></o:p>
Any advise?<o:p></o:p>
Gerhard Waterkamp ACSLA Inc.No, I am not done.
The situation is that on the DR site SP1 on 2 Exchange 2013 servers (on 2008 R2) using Windows 2012 R2 Domain controllers does not install.
Error messages: ( a whole bunch more, but all related to this)
Error:
Either Active Directory doesn't exist, or it can't be contacted.
It is not resolved but still open.
Gerhard Waterkamp ACSLA Inc. -
Server Exchange 2013 SP1 installation on Hyper-V server
Dear colleges, I seek your help with ExchangeServer 2013 installation on a Hyper-V server issue I've been having.
Getting below errors during prerequisites check of XCHG SVR installation. Installation is done on a Hyper-V server. This server is member of a domain. I have also promoted this server to a Active Directory Domain Controller. In other words there's 2 AD DC
- one is on the main server and the other on this one. The user the installation is run under has ALL required access rights. Please advise as this issue is getting on my nerves. I believe something is wrong setup on a AD DC part. Please suggest what to check
and post on the forum, so somebody can just point out what I am doing wrong.
Error:
The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
Error:
Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container. See the Exchange setup log for more information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit:Got the same errors when ran on the main AD DC server:
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>setup /ps /iacceptexchangeserverlicenseterms
'setup' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>h:
H:\>setup /ps /iacceptexchangeserverlicenseterms
Welcome to Microsoft Exchange Server 2013 Service Pack 1 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis FAILED
The Active Directory schema isn't up-to-date, and this user account isn't a
member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
Setup encountered a problem while validating the state of Active Directory:
Couldn't find the Enterprise Organization container. See the Exchange setup lo
g for more information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.AdInitErrorRule.aspx
The forest functional level of the current Active Directory forest is not W
indows Server 2003 native or later. To install Exchange Server 2013, the forest
functional level must be at least Windows Server 2003 native.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.CannotAccessAD.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
H:\> -
Hi,
I installed a new exch2013 sp1 server and created few users.
In that Administrator can able to access OWA & Admin Center without any error.
Where Other users not able to access OWA- its prompting error Something Went wrong.
I didn't check with Outlook client.
I gone thru forums and reset the Virtual Directory, Cleared the Exchcanary data 0,1,2 using ADSI edit.
Nothing works. Please help me to resolve this issue.
Regards
DineshHi Dinesh,
From your description, I recommend you use the Test-ServiceHealth cmdlet to check if all services Exchange server needed are started. If no, please start the services Exchange server needed and check the result.
What's more, please make sure that OWA is enabled for other users.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Exchange 2013 SP1 Installation
Hello
After installation on windows domain server/controller 2012 R2.
I got this message:
VERBOSE: Connecting to GolfServer.GOLFKLUB.local.
New-PSSession : [golfserver.golfklub.local] Connecting to remote server golfserver.golfklub.local failed with the follo
wing error message : The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication
mechanism, but the destination computer (GolfServer.GOLFKLUB.local:80) returned an 'access denied' error. Change the c
onfiguration to allow Kerberos authentication mechanism to be used or specify one of the authentication mechanisms supp
orted by the server. To use Kerberos, specify the local computer name as the remote destination. Also verify that the c
lient computer and the destination computer are joined to a domain. To use Basic, specify the local computer name as th
e remote destination, specify Basic authentication and provide user name and password. Possible authentication mechanis
ms reported by server: Digest Negotiate For more information, see the about_Remote_Troubleshooting Help topic.
I tried to find solution on many forums and I also check other erros in Event Log and Kerberos...
I also cannot connect to Administration center.
Can anyone help me, please.
Thank you very muchHi VachtiCZ,
Thank you for your question.
By the error, we could do the following steps to troubleshoot:
If there are another application which is installed on GolfServer.GOLFKLUB, we could open IIS and navigate Default Web Site to check if
the port 80 has been used by another application. if that we could change the port of application.
Check if we have disable the Kerberos authentication
a. Run gpedit.msc in Run
b. Navigate Computer Configuration>Administrative Templates>Window Components>Window Remote Management(WinRM)>WinRM Service
c. Check if we have selected “Enable” on Disallow Kerberos authentication
d. Then we could use “gpupdate /force” to update group policy.
I also cannot connect to Administration center
A: It was caused by the above error. So if we solve this error, we will access EAC. if there are coexistence in organization, for example Exchange 2010, we could refer to the following link to access EAC:
https://technet.microsoft.com/en-us/library/jj150562(v=exchg.150).aspx
In addition, I strongly suggest we didn’t install Exchange server on Domain controller on production.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim -
Installing Exchange 2013 SP1 - Errors MSExchange ADAccess & MSExchange Common
The topology first:
AD-server + Exchange-server
What I am trying to do is just install a full version of Exchange 2013 sp1.
But the problem is that install wizard freezes on the "initializing setup" page. Also eventviewer gives 2 different error messages, MSExchange ADAccess & MSExchange Common.
MSExchange ADAccess:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
2964
Get Servers for mydomain.com
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:01.9984949. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
MSExchange Common:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
1044 VSSVC
1064 spoolsv
4032 notepad
1416 svchost
700 dwm
3100 SMSvcHost
3616 msdtc
2564 csrss
336 csrss
424 winlogon
244 smss
688 LogonUI
2556 Taskmgr
596 svchost
1124 inetinfo
1920 svchost
1652 SMSvcHost
1400 svchost
2916 taskhostex
492 lsass
2688 dwm
396 wininit
484 services
1104 svchost
388 csrss
384 svchost
1896 svchost
3052 svchost
744 svchost
1180 mmc
3404 conhost
1800 explorer
3668 Setup
552 svchost
712 svchost
2864 svchost
2964 ExSetup
2948 rdpclip
2592 winlogon
900 svchost
808 svchost
4 System
1164 mqsvc
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange
activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message tableI solved this problem or at least managed to get a workaround for it.
I tried to install Exchange using rdp connection and the installation media was mapped on my local computer. After I copied it to server itself, everything started to work and now I am able to send emails. -
I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+ New-PerfCounters -DefinitionFileName $f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
+ FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible. -
Exchange 2013 SP1 | Another HTTP 500.0.0 Error
Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support -
Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation
Hi Fellows,
I am facing an issue with Exchange 2013 SP1 (5.0.847.32)
environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/groups from Exchange Control Panel:
"The Object <object DN> has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control defines the ObjectType <object guid> that can't be resolved.."
I can see some forum threads with same issue (links given below) but unable to find if this is a known issue and how to get it resolved. Need assistance if anyone has faced same and could help me out to figure it.
http://social.technet.microsoft.com/Forums/exchange/en-US/72310530-d1de-4b39-a0fb-1592247df03f/access-control-entry-issue-after-installing-lync-2013-into-the-forest?forum=exchangesvrdeploy
http://www.networksteve.com/exchange/topic.php/Issue_with_exchange_2013_lync_2013_intergration/?TopicId=37192&Posts=2
J.AHi
Usually the affected SID objects are referring to deleted objects.
Use the PsGetSid tool to try to resolve them. -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Exchange 2013 SP1 CU8 installation stuck
Good Morning,
I'm just installing CU8 for Exchange 2013 on a DAG Member (only mailbox role installed), and setup is stuck at 49% of "Mailbox Role: Client Access service" for more than 2 hours now.
The ExchangeSetup logfile says:
[04/15/2015 06:44:20.0582] [2] Active Directory session settings for 'New-PerfCounters' are: View Entire Forest: 'True', Configuration Domain Controller: 'srv-dc02.oostvogels.com', Preferred Global Catalog: 'dc02.contoso.com', Preferred Domain Controllers: '{ dc02.contoso.com }'
[04/15/2015 06:44:20.0582] [2] User specified parameters: -DefinitionFileName:'ServiceProxyPoolCounters.xml'
[04/15/2015 06:44:20.0582] [2] Beginning processing new-PerfCounters
[04/15/2015 06:44:20.0582] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\ServiceProxyPoolCounters.xml
[04/15/2015 06:44:20.0582] [2] Performance counter name is Proxy Instance Count, type is NumberOfItems32.
[04/15/2015 06:44:20.0582] [2] Performance counter name is Current Outstanding Calls, type is NumberOfItems32.
[04/15/2015 06:44:20.0582] [2] Performance counter name is Total Number of Calls, type is NumberOfItems32.
[04/15/2015 06:44:20.0582] [2] Performance counter name is Calls/sec, type is RateOfCountsPerSecond32.
[04/15/2015 06:44:20.0582] [2] Performance counter name is Average Latency, type is AverageCount64.
[04/15/2015 06:44:20.0582] [2] Performance counter name is Base for Average Latency, type is AverageBase.
[04/15/2015 06:44:20.0582] [2] Performance counter category name is 'MSExchange ServiceProxyPool'.
[04/15/2015 06:44:20.0738] [2] Performance counter category name is 'MSExchange ServiceProxyPool'.
[04/15/2015 06:44:22.0255] [2] Ending processing new-PerfCounters
Does anyone have any suggestions or did you experience a similar issue?
I also can see some events like this:
Cmdlet failed. Cmdlet New-PerfCounters, parameters -DefinitionFileName "ADDriverCachePerformanceCounters.xml".
Thanks and best regards,
SebastianHi,
According to your post, I understand that install Exchange 2013 SP1 CU8 in a DAG with MBX role failed with error “Cmdlet failed. Cmdlet New-PerfCounters, parameters -DefinitionFileName ‘ADDriverCachePerformanceCounters.xml’”.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether you deploy clean install or implement upgrade an existing Exchange Server 2013 installation to Cumulative Update 8.
To rebuild all Performance counters including extensible and third-party counters, type the following commands at an Administrative command prompt. Press ENTER after each command:
1. Rebuilding the counters:
cd c:\windows\system32
lodctr /R
2. Resyncing the counters with Windows Management Instrumentation (WMI):
WINMGMT.EXE /RESYNCPERF
3. Stop and restart the Performance Logs and Alerts service.
4. Stop and restart the Windows Management Instrumentation service.
If the issue persists, please run to reload all the perf counters. For your reference:
http://blogs.technet.com/b/mikelag/archive/2010/09/10/how-to-unload-reload-performance-counters-on-exchange-2010.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Exchange 2013 SP1 RPC 404 Error Page Not Found
Anyone got any ideas why on my Exchange 2013 SP1 server I am getting a 404 error when trying to access the RPC URL?
I had a look in the CAS RPC logs and see the following HTTP POST events:
<snip>
2014-06-19T15:33:00.558Z,EX-CAS1,RpcHttp,"S:Stage=BeginRequest;S:OutlookSessionId=""{17FD197A-098A-4339-82E9-A480F6DD70F7}"";S:AuthType=Basic;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.internal.local:6004;S:RequestId=0acc9487-bf8f-4600-ae04-edf2ef00a90b;S:ClientIp=192.168.0.17"
2014-06-19T15:33:00.558Z,EX-CAS1,RpcHttp,"S:Stage=PostAuthorizeRequest;S:UserName=INTERNAL\SVC_BMA;S:OutlookSessionId=""{17FD197A-098A-4339-82E9-A480F6DD70F7}"";S:AuthType=Basic;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.internal.local:6004;S:RequestId=0acc9487-bf8f-4600-ae04-edf2ef00a90b;S:ClientIp=192.168.0.17"
2014-06-19T15:33:00.574Z,EX-CAS1,RpcHttp,"S:Stage=EndRequest;S:UserName=INTERNAL\SVC_BMA;S:OutlookSessionId=""{17FD197A-098A-4339-82E9-A480F6DD70F7}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.internal.local:6004;S:RequestId=0acc9487-bf8f-4600-ae04-edf2ef00a90b;S:ClientIp=192.168.0.17"
</snip>
This works fine in Exchange 2010 SP3 so I am wondering if maybe Microsoft have removed the /rpc url functionality in Exchange 2013 SP1?Hi JRA,
Is it possible to provide more info for your issue?
You receive as you said HTTP 404 error, can you provide the specific HTTP 404 error message?
For example:
HTTP/1.0 404 File Not Found
HTTP/1.0 404 Not Found
HTTP/1.0 404 Object Not Found
HTTP/1.0 404 Page Cannot Be Found
The page cannot be found. The page you are looking for might have been removed, had its name changed, or is temporarily unavailable
Also a screenshot will be very helpful
Regards,
CF -
Error while adding member to the dag in exchange 2013 sp1
I have Windows Server 2012 Std Edition with Exchange 2013 SP1 and get the following error while adding member to the dag either i do it using EAC or the powershell
Senior Technical Consultant, MDS ComputersWhen running set-databaseavailabilitygroup Exchange-dag without parameters, it crashes again:
[PS] C:\Windows\system32>Set-DatabaseAvailabilityGroup exchange-dag
WARNING: An unexpected error has occurred and a Watson dump is being generated: Some or all identity references could not be translated. Some or all identity references could not be translated.
+ CategoryInfo : NotSpecified: (:) [Set-DatabaseAvailabilityGroup], IdentityNotMappedException
+ FullyQualifiedErrorId : System.Security.Principal.IdentityNotMappedException,Microsoft.Exchange.Management.Syste
mConfigurationTasks.SetDatabaseAvailabilityGroup
+ PSComputerName : <server>
Also, this is logged in the eventlog:
Watson report about to be sent for process id: 7424, with parameters: E12, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangePowerShellAppPool, M.Exchange.Management, M.E.M.C.FileShareWitness.Create, S.S.Principal.IdentityNotMappedException, 3e5c, 15.00.0847.031.
ErrorReportingEnabled: True
Definitely looks like a problem creating the filewitness share.
Frank. -
Cannot write email body in OWA with Exchange 2013 SP1 CU6
Hi,
I have a problem with Exchange 2013 SP1 with CU6.
All of OWA user cannot write in the body of email. They can write the Object and the recipient but they cannot select body and write the body message. We have try with multiple Web brother and desactivate all Add-on but the problem still there...
The only way that works is to respond to an email, and in that case, it's working, we can write normally in the body of email.
Have you an idea ?
Thanks in advance!
SebastienHi,
After contacting Microsoft support, we have found the solution.
The problem appear after we have recently install the patch described in this KB 2997209:
https://support.microsoft.com/kb/2997209?wa=wsignin1.0
But on 2013 Mailbox Server, Echange is not installed in the default path C:\ but on D:\
So we have to manually copy the content of folder D:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Owa\prem\15.0.995.29 in the folder 15.0.995.31 (MAKE a BACKUP of FOLDER BEFORE!)
No need to reboot, or restart IIS, it's working after that!
@+
Sébastien
Maybe you are looking for
-
B1BC - Dashboard de Consolidação
Prezados Boa tarde, Iniciei a utilização do B1BC e cheguei até o ponto de consolidar Lançamentos Contábeis, consegui exportar e importar o plano de de contas e associar as contas, porém no momento de exportar lançamentos já tem 10 dias que "está proc
-
Bapi for creating purchase info records
Hi, Is there any bapi or standard function to create PIR
-
How can I center text in a JTextArea?
I'm coding my own little font selection frame, and want to display the sample text in a JTextArea, and want to know how I can get the text centered in the field. Does anyone know how this can be done? Thanks.
-
Linking to more than one point in a PDF from a browser
Hi guys, i have been tasked with creating a website to house a few pdf's. I have set this up so that you click a link in the navigation and it displays the pdf in a frame on the right side of the page and goes directly to the page i specify. The prob
-
Why won't my itunes recognize that there is an update for ios 7
I tried to update my phone to the iOS 7 last night but couldn't so tried again this afternoon but my itunes won't say there is a new update for iOS 7. My itunes now says that I have the current version (6.1.3) and that itunes will check again on 9/21