Exchange 2013 Sp1 OWA Error

Hi,
I installed a new exch2013 sp1 server and created few users.
In that Administrator can able to access OWA & Admin Center without any error.
Where Other users not able to access OWA- its prompting error Something Went wrong.
I didn't check with Outlook client.
I gone thru forums and reset the Virtual Directory, Cleared the Exchcanary data 0,1,2 using ADSI edit.
Nothing works. Please help me to resolve this issue.
Regards
Dinesh

Hi Dinesh,
From your description, I recommend you use the Test-ServiceHealth cmdlet to check if all services Exchange server needed are started. If no, please start the services Exchange server needed and check the result.
What's more, please make sure that OWA is enabled for other users.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

Exchange 2013 SP1 Installation Errors I Cannot Resolve

Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -

Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2013 SP1 OWA something went wrong

Hi,
I have a three node exchange 2013 DAG cluster that I upgraded to SP1 three days ago.   All email flows currently work and ECP is available on all node on all browsers for all users.   OWA was working on 2013 CU3.   After
the upgrade to SP1 and I confirmed that all email flows were working, I did change the administrators username. I noticed OWA problems after that, but they would have happened before the administrator rename. I have confirmed
certificates and binding are correct on all three nodes. I did rebuild the OWA directory on one node with no success.
However OWA is only available using Firefox (tested on several users on several machines) .   Logging on to ECP using IE 11 works fine (multiple users) Logging on to OWA using IE 11 give me the error. This is happening on
all three nodes using IE 11 but not Firefox 27
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.
X-OWA-Error: ClientError;exMsg='_u' is undefined;file=ReferenceError: '_u' is undefined at $LE (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.1.mouse.js:1:155) at Anonymous function (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.1.mouse.js:1:305913) at $8J (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:60172) at $E (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:59789) at $4pj (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:57814) at $6JC (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:58302) at Anonymous function (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.1.mouse.js:1:306768) at $8J (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:60172) at $E (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:59789) at $4pj (https://exch02.loran3.net/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:57814):406
X-OWA-Version: 15.0.847.32
X-FEServer: EXCH02
X-BEServer: null
Date: 1/2/1601 2:43:20 PM
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          3/13/2014 11:45:50 PM
Event ID:      10028
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      exch01.loran3.net
Description:
DCOM was unable to communicate with the computer EXCH02.loran3.net using any of the configured protocols; requested by PID     115c (c:\windows\system32\inetsrv\w3wp.exe).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10028</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-14T05:45:50.109325400Z" />
    <EventRecordID>12481</EventRecordID>
    <Correlation />
    <Execution ProcessID="596" ThreadID="1372" />
    <Channel>System</Channel>
    <Computer>exch01.loran3.net</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="param1">EXCH02.loran3.net</Data>
    <Data Name="param2">    115c</Data>
    <Data Name="param3">c:\windows\system32\inetsrv\w3wp.exe</Data>
    <Binary>3C5265636F726423313A20436F6D70757465723D286E756C6C293B5069643D3539363B332F31342F3230313420353A34353A35303A3130393B5374617475733D313832353B47656E636F6D703D323B4465746C6F633D313436313B466C6167733D303B506172616D733D303B3E3C5265636F726423323A20436F6D70757465723D286E756C6C293B5069643D3539363B332F31342F3230313420353A34353A35303A3130393B5374617475733D313832353B47656E636F6D703D323B4465746C6F633D3135333B466C6167733D303B506172616D733D343B7B506172616D23303A2D323134363839333030367D7B506172616D23313A347D7B506172616D23323A36383132367D7B506172616D23333A317D3E</Binary>
</EventData>
</Event>                   ---------------------                 I am also getting
the following error
Log Name:      Application
Source:        ASP.NET 4.0.30319.0
Date:          3/14/2014 12:46:26 AM
Event ID:      1309
Task Category: Web Event
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      exch01.loran3.net
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/14/2014 12:46:26 AM
Event time (UTC): 3/14/2014 6:46:26 AM
Event ID: 7741cd563e154a14a0ba52343b4e30ee
Event sequence: 328
Event occurrence: 87
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/owa-1-130392504882416692
    Trust level: Full
    Application Virtual Path: /owa
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\
    Machine name: EXCH01
Process information:
    Process ID: 8756
    Process name: w3wp.exe
    Account name: NT AUTHORITY\SYSTEM
Exception information:
    Exception type: MapiExceptionIllegalCrossServerConnection
    Exception message: MapiExceptionIllegalCrossServerConnection: Monitoring mailbox [] with application ID [Client=OWA] is not allowed to make cross-server calls from [EXCH01.loran3.net] to [EXCH03.loran3.net]
   at Microsoft.Mapi.CrossServerDiagnostics.BlockCrossServerCall(ExRpcConnectionInfo connectionInfo, String mailboxDescription)
   at Microsoft.Mapi.CrossServerConnectionPolicy.CheckAndBlockMonitoringMailboxes(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.CrossServerConnectionPolicy.Apply(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.ExRpcConnectionFactory.Create(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, Boolean unifiedLogon, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout,
TimeSpan callTimeout, Byte[] tenantHint)
   at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, ClientIdentityInfo
clientIdentity, String applicationId, Byte[] tenantPartitionHint, Boolean unifiedLogon)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore, Boolean unifiedSession)
Request information:
    Request URL:
https://localhost:444/owa/proxylogon.owa
    Request path: /owa/proxylogon.owa
    User host address: 127.0.0.1
    User: LORAN3\SM_ae42d22c64ff48a5a
    Is authenticated: True
    Authentication Type: Kerberos
    Thread account name: NT AUTHORITY\SYSTEM
Thread information:
    Thread ID: 39
    Thread account name: NT AUTHORITY\SYSTEM
    Is impersonating: False
    Stack trace:    at Microsoft.Mapi.CrossServerDiagnostics.BlockCrossServerCall(ExRpcConnectionInfo connectionInfo, String mailboxDescription)
   at Microsoft.Mapi.CrossServerConnectionPolicy.CheckAndBlockMonitoringMailboxes(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.CrossServerConnectionPolicy.Apply(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.ExRpcConnectionFactory.Create(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, Boolean unifiedLogon, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout,
TimeSpan callTimeout, Byte[] tenantHint)
   at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, ClientIdentityInfo
clientIdentity, String applicationId, Byte[] tenantPartitionHint, Boolean unifiedLogon)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore, Boolean unifiedSession)
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 4.0.30319.0" />
    <EventID Qualifiers="32768">1309</EventID>
    <Level>3</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-14T06:46:26.000000000Z" />
    <EventRecordID>115079</EventRecordID>
    <Channel>Application</Channel>
    <Computer>exch01.loran3.net</Computer>
    <Security />
</System>
<EventData>
    <Data>3005</Data>
    <Data>An unhandled exception has occurred.</Data>
    <Data>3/14/2014 12:46:26 AM</Data>
    <Data>3/14/2014 6:46:26 AM</Data>
    <Data>7741cd563e154a14a0ba52343b4e30ee</Data>
    <Data>328</Data>
    <Data>87</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/2/ROOT/owa-1-130392504882416692</Data>
    <Data>Full</Data>
    <Data>/owa</Data>
    <Data>C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\</Data>
    <Data>EXCH01</Data>
    <Data>
    </Data>
    <Data>8756</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\SYSTEM</Data>
    <Data>MapiExceptionIllegalCrossServerConnection</Data>
    <Data>MapiExceptionIllegalCrossServerConnection: Monitoring mailbox [] with application ID [Client=OWA] is not allowed to make cross-server calls from [EXCH01.loran3.net] to [EXCH03.loran3.net]
   at Microsoft.Mapi.CrossServerDiagnostics.BlockCrossServerCall(ExRpcConnectionInfo connectionInfo, String mailboxDescription)
   at Microsoft.Mapi.CrossServerConnectionPolicy.CheckAndBlockMonitoringMailboxes(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.CrossServerConnectionPolicy.Apply(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.ExRpcConnectionFactory.Create(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, Boolean unifiedLogon, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout,
TimeSpan callTimeout, Byte[] tenantHint)
   at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, ClientIdentityInfo
clientIdentity, String applicationId, Byte[] tenantPartitionHint, Boolean unifiedLogon)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore, Boolean unifiedSession)
</Data>
    <Data>https://localhost:444/owa/proxylogon.owa</Data>
    <Data>/owa/proxylogon.owa</Data>
    <Data>127.0.0.1</Data>
    <Data>LORAN3\SM_ae42d22c64ff48a5a</Data>
    <Data>True</Data>
    <Data>Kerberos</Data>
    <Data>NT AUTHORITY\SYSTEM</Data>
    <Data>39</Data>
    <Data>NT AUTHORITY\SYSTEM</Data>
    <Data>False</Data>
    <Data>   at Microsoft.Mapi.CrossServerDiagnostics.BlockCrossServerCall(ExRpcConnectionInfo connectionInfo, String mailboxDescription)
   at Microsoft.Mapi.CrossServerConnectionPolicy.CheckAndBlockMonitoringMailboxes(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.CrossServerConnectionPolicy.Apply(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.ExRpcConnectionFactory.Create(ExRpcConnectionInfo connectionInfo)
   at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, Boolean unifiedLogon, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout,
TimeSpan callTimeout, Byte[] tenantHint)
   at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, ClientIdentityInfo
clientIdentity, String applicationId, Byte[] tenantPartitionHint, Boolean unifiedLogon)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore, Boolean unifiedSession)
</Data>
</EventData>
</Event>

Thanks
I have three servers exch01,exch02,and exch03. All three have both CAS and mailbox server roles.   This problem does not occur using firefox (OWA and ECP are available) but the problem occurs with IE 11 and safari (ECP
work, OWA dos not) I have tried this from different machines and different users. I have cleared the browser's cache and have even reloaded the client machines. The problem occurs across all three exchange servers.
I have used iis manager to confirm the binding are correct. (works on Firefox)
From the local server , If I browse to
https://localhost/ecp I get my ecp page.   If I browse to
https://localhost/owaI get the something went wrong page (X-OWA-Error: ClientError;exMsg='_u' is undefined;file=ReferenceError: '_u' is undefined)
If I try to browse to https://localhost:444/owa/proxylogon.owa I get the error page "this page cannot be displayed"
I confirmed port 444 bindings are correct

Viewing attachments in Public Folders in Exchange 2013 SP1 OWA

Hello!
Tell me please should the file preview work in Public Folders (for example for docx files) in OWA 2013 SP1? This file can be easily opened in MS Word but clicking the
Preview leads to the following error:
Thank you in advance,
Michael

Hi Jessie,
Thank you for your help!
"To preview these files in Inbox in OWA, Exchange 2013 could has its own process to achieve this function. I tried it in Exchange 2013 CU1 environment, it is also working when previewing these files in the Inbox
in OWA." - that's the only possible explanation... but it means this article is not correct:
http://technet.microsoft.com/library/2591b1be-92c4-4192-9f5e-e4e6b319170a"
"By default, the following file types are displayed
using Office Web Apps Server:
Word documents (doc, docx, dotx, dot, dotm extensions)
Excel documents (xls, xlsx, xlsm, xlm, xlsb extensions)
PowerPoint documents (ppt, pptx, pps, ppsx, potx, pot, pptm, potm, ppsm extensions)
...cause I can preview files without Office Web Apps Server. Why there's no corresponding information on technet?
To put it mildly, documentation for Exchange 2013 is rather strange...
Regards,
Michael

Exchange 2013 SP1 prerequ errors

Current installation. 4 Exchange 2013 machines on Server 2008 R2 platform (VM with Hyper-V), all have CAS and mailbox role installed. DAG across all for servers. 2 servers
reside in main datacenter and 2 on a DR site.
The Exchange installation is at CU 2 and working.<o:p></o:p>
We have 2 domain controllers in the main datacenter (win 2008 R2) and 2 domain controllers in the DR site (Win 2012 R2).<o:p></o:p>
DCDIAG checks out fine on all. Network is fine for all.
Running SP1 installation on the Exchange servers in the DR site results in prerequisites in a bunch of errors which all stem from one root issue: <o:p></o:p>
Error:
Either Active Directory doesn't exist, or it can't be contacted.<o:p></o:p>
Running the same on the main site (DC= Win 2008 R2) completes prereq for SP1 with no errors.
So the difference is that the 2 Exchange servers on the DR site have Win 2012 R2 for their domain controllers and fail.<o:p></o:p>
Any advise?<o:p></o:p>
Gerhard Waterkamp ACSLA Inc.

No, I am not done.
The situation is that on the DR site SP1 on 2 Exchange 2013 servers (on 2008 R2) using Windows 2012 R2 Domain controllers does not install.
Error messages: ( a whole bunch more, but all related to this)
Error:
Either Active Directory doesn't exist, or it can't be contacted.
It is not resolved but still open.
Gerhard Waterkamp ACSLA Inc.

Exchange 2013 ECP/OWA Error 503 Service Unavailable

Hi,
Hoping that someone can clarify or assist with an issue relating to Exchange 2013 CU3..
Both roles installed on a single 2012 server, mailboxes created, able to login to ECP/OWA using ht tps://servername.int.domain.com/ecp using the out of the box internally generated SSL certificate.
Virtual directory internal and external settings for all directories were configured to be ht tps://mail.domain.com/owa /ecp /EWS etc and a UCC certificate (containing mail.domain.com, autodiscover.domain.com)from GoDaddy was imported and assigned to
IIS and SMTP, internal DNS records were setup internally and externally for mail.domain.com and full propagated, Outlook Anywhere enabled and configured to mail.domain.com, external access configured for all virtual directories
The issue is that ECP and OWA can only be accessed internally by the full internal server FQDN URL ht tps:// serverame.int.domain.com/ecp whereas it should be accessible at this point by ht tps:// mail.domain.com/ecp
Error received both internal and external when trying ht tps://mail.domain.com / owa / rpc etc is error 503 Service Unavailable
I know that the ECP and OWA sites are up and running as I can login and do anything by internal servername URL but no joy at all using the external (which is to be used for internal clients aswell for seamless access)
The only way it works is by adding a host name to the 2 x 443 bindings in IIS for the front end website and set it to mail.domain.com but this means autodiscover.domain.com internally and externally wont work
Is this normal and required for Exchange 2013 or is there a way to resolve this?
Thanks in advance!

Hi,
I found a article might help you, for you reference:
http://support.microsoft.com/kb/2619402
Generally, this error occurs if the application pool that is associated with the web application doesn't start.
To troubleshoot this issue, follow these steps:
In Event Viewer, view the System log to find errors from the Microsoft-Windows-WAS source. An event is frequently logged in the System log if the application pool fails to start.
If you don't find any relevant events in the System log, search for relevant entries in the HTTPERR log file. The httperr1.log file is located in the following system folder:
c:\windows\system32\logfiles
In the file, search on "503" to locate any relevant information about why the application pool failed. For example, you may see an entry that resembles the following:
2011-12-08 18:26:42 ::1%0 6721 ::1%0 443 HTTP/1.1 GET /owa 503 3 N/A SharePoint+Web+Services+Root
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2013 SP1 Installation Error in "Mailbox Role: Transport service"

I tried an installation last week on a Windows Server 2008 R2 but was unable to get it to work. With the value of hindsight, I am inclined to think the error was more with the Web Site making EAC unavailable. I subsequently got it installed in my personal
lab environment by creating a VM with a fresh install of Windows Server 2008 R2 SP1.
With this information I then went back to the customer's site and installed a clean version of Windows Server 2008 R2 SP1 in a virtual machine under Hyper-V. After installing all the prerequisites the install appeared to be going just fine but then in failed
in Step 7 with the following error:
The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
I know MS Exchange hides most of its information in AD so my suspicion is that the failed install on the real server has left some residual information in AD. Note that the original install on the real machine won't uninstall because the prior install attempt
hasn't finished.
The relevant part of the Exchange Setup Log is:
[07/22/2014 14:22:57.0593] [2] Active Directory session settings for 'Update-RmsSharedIdentity' are: View Entire Forest: 'True', Configuration Domain Controller: 'AWSDC.aws.local', Preferred Global Catalog: 'AWSDC.aws.local', Preferred Domain Controllers: '{
AWSDC.aws.local }'
[07/22/2014 14:22:57.0593] [2] User specified parameters: -ServerName:'EXCHANGE'
[07/22/2014 14:22:57.0593] [2] Beginning processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0031] [2] RMS Shared Identity user 'CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042,CN=Users,DC=aws,DC=local' (originating server = 'AWSDC.aws.local') is being linked to computer 'CN=EXCHANGE,CN=Computers,DC=aws,DC=local' (originating
server = 'AWSDC.aws.local').
[07/22/2014 14:22:58.0156] [2] [ERROR] Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [2] Ending processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0156] [1] The following 1 error(s) occurred during task execution:
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Microsoft.Exchange.Data.DataValidationException: Database is mandatory on UserMailbox.
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.Link()
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[07/22/2014 14:22:58.0156] [1] [ERROR] The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
[07/22/2014 14:22:58.0156] [1] [ERROR] Database is mandatory on UserMailbox.
Does anyone have suggestions about what to do with ADSI Edit to fix the problems?
I think I am getting close to having a working Exchange!!

Hi,
Agree with Amit's suggestion. Please use the following cmdlet to re-home the arbitration mailbox which does not have database attribute stamped and check the result.
Set-Mailbox "FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042" -Arbitration -Database "xxx"
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2013 SP1 OWA the page can't be displayed issue

OWA the page can't be displayed
Hi, i've Exchange topology (upgraded from 2007 one server)
2 CAS servers NLB with VIP 172.16.0.98
2 MBX Servers DAG with DAG
using Cisco ASA NAT public IP for example 9.9.9.9 ....> 172.16.0.98
i've created split DNS zone for public domain in internal DNS to unify URLs internal and external Mail.Domain.Com
i've created internal zone called Mail.Domain.Com and Autodiscover.domain.com point to VIP 172.16.0.98
Everything is OK but sometimes users report when they access OWA from inside or outside when user submit user/ pass faced error the page can't be displayed?
i tried this this user from different browsers and different computer the same issue
if i tried another user from the same computer it works fine
the strangest point after 30-60 minutes it backs to live and everything going fine
i checked event viewer there is nothing related to this issue.
in sometimes if i tried to access manual to CAS1.Domain.Local / IP address/ owa it works fine.
URL changes to https://Mail.Domain.Com/owa/auth.owa
i red some about putting my public domain as remote domain but it's not clear !
any ideas please?

If it works properly when connecting directly to the server, then something is misconfigured in the load balancer or something else in that data path.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Thanks Ed,
NLB converged is OK. and all users are running well, except while this issue accrued.
i checked event viewer under exchange managed availability
EMSMDB.Connect() step of ComplianceOutlookLogonToArchiveMapiHttpCtpProbe/MBX2DB2 has failed against ExCAS1.Domain.LOCAL proxying to Unknown for [email protected].
Latency: 00:00:00.0380000
ActivityContext:
Outline: [37]6/19/2014 11:27:05 AM [FAILED!] EMSMDB.Connect();
Likely root cause: UnknownIssue
Details:
Error: Error returned in ConnectCallResult. Error code = LogonFailed (0x80040111)
Log: Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 6/19/2014 11:27:05 AM
- TaskFinished = 6/19/2014 11:27:05 AM
- Exception = Microsoft.Exchange.RpcClientAccess.RopExecutionException: Error returned in ConnectCallResult. Error code = LogonFailed (0x80040111) ---> System.Exception: Microsoft.Exchange.RpcClientAccess.Server.LoginFailureException:
Unable to access AD (StoreError=LoginFailure) ---> Microsoft.Exchange.Data.Storage.MailboxInfoStaleException: Can't connect to the mailbox of user Mailbox database guid: d020aa7f-371b-4da5-808a-3a5d18dc8d81 because the ExchangePrincipal object
contains outdated information. The mailbox may have been moved recently. ---> Microsoft.Exchange.Data.Storage.DatabaseNotFoundException: The database with ID d020aa7f-371b-4da5-808a-3a5d18dc8d81 couldn't be found.
at Microsoft.Exchange.Data.Storage.ActiveManager.ActiveManager.GetServerNameForDatabase(Guid databaseId, GetServerForDatabaseFlags gsfdFlags, IPerformanceDataLogger perfLogger, IADDatabase& database)
at Microsoft.Exchange.Data.Storage.ActiveManager.ActiveManager.GetServerForDatabase(Guid databaseId, GetServerForDatabaseFlags gsfdFlags, IPerformanceDataLogger perfLogger)
at Microsoft.Exchange.Data.Storage.DatabaseLocationProvider.GetLocationInfo(Guid mdbGuid, Boolean bypassCache, Boolean ignoreSiteBoundary)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.DatabaseLocationProvider.GetLocationInfo(Guid mdbGuid, Boolean bypassCache, Boolean ignoreSiteBoundary)
at Microsoft.Exchange.RpcClientAccess.Server.UserManager.User.UpdatePrincipalCacheIfNeeded()
at Microsoft.Exchange.RpcClientAccess.Server.UserManager.User.UpdatePrincipalCacheWrapped(Boolean ignoreCrossForestMailboxErrors)
--- End of inner exception stack trace ---
at Microsoft.Exchange.RpcClientAccess.Server.UserManager.User.UpdatePrincipalCacheWrapped(Boolean ignoreCrossForestMailboxErrors)
at Microsoft.Exchange.RpcClientAccess.Server.UserManager.Get(SecurityIdentifier authenticatedUserSid, String actAsLegacyDN, String userDomain)
at Microsoft.Exchange.RpcClientAccess.Server.RpcDispatch.<>c__DisplayClassc.<EcDoConnectEx>b__8()
at Microsoft.Exchange.RpcClientAccess.Server.RpcDispatch.Execute(Func`1 getExecuteParameters, Func`1 executeDelegate, Action`1 exceptionSerializationDelegate)
--- End of inner exception stack trace ---
- ErrorDetails =
- RespondingRpcClientAccessServerVersion = 15.0.847.30
- Latency = 00:00:00.0377761
EMSMDB.Connect() failed.
Task produced output:
- TaskStarted = 6/19/2014 11:27:05 AM
- TaskFinished = 6/19/2014 11:27:05 AM
- Exception = Microsoft.Exchange.RpcClientAccess.RopExecutionException: Error returned in ConnectCallResult. Error code = LogonFailed (0x80040111) ---> System.Exception: Microsoft.Exchange.RpcClientAccess.Server.LoginFailureException: Unable
to access AD (StoreError=LoginFailure) ---> Microsoft.Exchange.Data.Storage.MailboxInfoStaleException: Can't connect to the mailbox of user Mailbox database guid: d020aa7f-371b-4da5-808a-3a5d18dc8d81 because the ExchangePrincipal object contains outdated
information. The mailbox may have been moved recently. ---> Microsoft.Exchange.Data.Storage.DatabaseNotFoundException: The database with ID d020aa7f-371b-4da5-808a-3a5d18dc8d81 couldn't be found.
at Microsoft.Exchange.Data.Storage.ActiveManager.ActiveManager.GetServerNameForDatabase(Guid databaseId, GetServerForDatabaseFlags gsfdFlags, IPerformanceDataLogger perfLogger, IADDatabase& database)
at Microsoft.Exchange.Data.Storage.ActiveManager.ActiveManager.GetServerForDatabase(Guid databaseId, GetServerForDatabaseFlags gsfdFlags, IPerformanceDataLogger perfLogger)
at Microsoft.Exchange.Data.Storage.DatabaseLocationProvider.GetLocationInfo(Guid mdbGuid, Boolean bypassCache, Boolean ignoreSiteBoundary)
--- End of inner exception stac
if user access to ExMBX2.Domain.Local it works fine.?
any ideas please ?

Exchange 2013 SP1 -OWA and ECP login authentication

Coexisting with Exchange 2007 in the same Org.
Just been through a nightmare where I changed the authentication type from Basic and Forms to Windows Integrated Authentication through the EAC for OWA and ECP. It broke them completely. Three hours later after rebuilding the two virtual directories I have
it working.
So I learnt about the backend process for both ECP and OWA and realised I have to have the authentication types the same in front and back end.
1. Is there a way to set authentication for both components at the same time? (that's a stoopid design)
2. So now I have integrated authentication- but I cannot login as someone else unless of course I login to windows as that other person. Which authentication do I need to add to allow prompting ifor other credentials (or is this not possible)?
3. Set-ECPvirtualdirectory can set the backend but get-ecpvirtualdirectory can not. It was really difficult to see the two sections had different authentication settings. Is there a way to see them?

I would recommend Basic Authentication and set Group Policy to add Exchange URLs to Trusted sites and modify IE settings to "Automatic login using current username/password" option for trusted settings.
This way Single-Signon would work for domain joined systems and Basic authentication would prompt for any unsuccessful logins
However, from the best practices perspective, I would recommend Form based authentication, unless there are business reasons for not doing it this way.
- Sarvesh Goel - Enterprise Messaging Administrator

Lync integration not working after Exchange 2013 SP1 is installed...

Hi,
I have two Exchange 2013 servers running and everything is fine, almost.
The problem is that on the first server we had OWA with Lync integration working before installing SP1, but after the installation of SP1, it doesn't Work any more.
The second server was installed with SP1 from the start, but we can't get the Lync integration to Work on this one either..
When we log in to OWA, it just starts to sign in but then says "there was a problem signing in, if this continues please contact your helpdesk"
I have checked the Exchange server for events, and i can see the event ID 112 everytime i recycle the Application Pool, so there are some connection between Exchange and Lync..
Have any of you Guys seen or experienced any thing like this?
Thanks in advance.
Regards
Kenneth

Hi,
I recommend that you refer to the following article to troubleshoot the issue:
Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013
This post describes how to configure Exchange 2013 OWA to have IM integration to Lync 2013. Here I would like to give some troubleshooting tips in case you can't get the integration to work.
In addition, here is a similar thread for your reference:
Lync 2013 with Exchange 2013 SP1 OWA integration failed
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2013 SP1 | Another HTTP 500.0.0 Error

Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...

Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support

HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL

Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326

See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK

Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+    New-PerfCounters -DefinitionFileName $f
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
    + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
   12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
   at System.Diagnostics.PerformanceCounter.InitializeImpl()
   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
   at System.Diagnostics.Process.GetProcessById(Int32 processId)
   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible.

Error while adding member to the dag in exchange 2013 sp1

I have Windows Server 2012 Std Edition with Exchange 2013 SP1 and get the following error while adding member to the dag either i do it using EAC or the powershell
Senior Technical Consultant, MDS Computers

When running set-databaseavailabilitygroup Exchange-dag without parameters, it crashes again:
[PS] C:\Windows\system32>Set-DatabaseAvailabilityGroup exchange-dag
WARNING: An unexpected error has occurred and a Watson dump is being generated: Some or all identity references could not be translated. Some or all identity references could not be translated.
+ CategoryInfo : NotSpecified: (:) [Set-DatabaseAvailabilityGroup], IdentityNotMappedException
+ FullyQualifiedErrorId : System.Security.Principal.IdentityNotMappedException,Microsoft.Exchange.Management.Syste
mConfigurationTasks.SetDatabaseAvailabilityGroup
+ PSComputerName : <server>
Also, this is logged in the eventlog:
Watson report about to be sent for process id: 7424, with parameters: E12, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangePowerShellAppPool, M.Exchange.Management, M.E.M.C.FileShareWitness.Create, S.S.Principal.IdentityNotMappedException, 3e5c, 15.00.0847.031.
ErrorReportingEnabled: True
Definitely looks like a problem creating the filewitness share.
Frank.

Exchange 2013 SP1 & Custom OWA Theme

On Friday of last week we updated from Exchange 2013 CU2 to Exchange 2013 SP1. Since updating our custom OWA theme no longer works. We configured it according to the following guide:
http://technet.microsoft.com/en-us/library/bb201700(v=exchg.150).aspx
The theme we customized was stored in the following location:
\Client Access\OWA\version\Owa2\resources\themes\"title of our theme"
Themes no longer appear to be stored in this location and I am uncertain as to where they have moved and how to apply them. Has anyone else run into this issue?

Hi,
Can we try to re-importing the theme again?
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 Sp1 OWA Error

Similar Messages

Maybe you are looking for