Exchange 2013 stating their name and LAN IP in the message header

Friends,
our Exchange Server 2013 server is sending
emails normally, but some target servers are
complaining that our messages are coming up with
the name and LAN IP of the server
header.
Look at the picture that actually has
a moment where the Exchange server informs
its name and its IP, how can I
avoid this?
Companies that are complaining, say it
falls in the spam filter and then
denies delivery of the message.
Hold and thank you!
Ivanildo Teixeira Galvão

That's expected and should not cause the message to be flagged as SPAM. If that is the case, just about all mail would be treated as SPAM. I doubt that is the reason.
You can remove those if you want with a hub transport rule, but I don't see the point.
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2007/SecurityMessageHygiene/HowtoremoveinternalservernamesandIPaddressesfromSMTPheaders.html
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

  • Trying to update my apps on the iPhone 3.  When I type in user name and password, I get the message "Cannot connect to iTunes Store"  How can I connect?

    Trying to update my apps on the iPhone 3.  When I type in user name and password, I get the message "Cannot connect to iTunes Store"  How can I connect?

    I have the same problem. Any suggestions?

  • IDoc to File with different file name and data based on the IDoc header dat

    Hi,
    I got a requirement to implement IDOC to file senario.  In this the Converted file should have the file name and file content based on IDoc Header data.  Means If one of the IDoc header field value is
    'A'  - then the file name recieved by reciever system should be 'A.txt' and with the columns A  B  C  D  F.
    'B'  - then the file name recieved by reciever system should be 'B.txt' and with the columns C  D  F.
    In both the case IDoc message type is same.
    Please suggest me what i need to do to achieve this.
    Thanks in Advance. ...
    Regards
    Sri

    Hi,
    As per my requirement, we need to create one file for each IDoc based on IDoc header data. SAP program generates 10 IDocs for each run. All 10 IDoc's message type is same.  Each IDoc has one header record with the file name. Base on the  name in the IDoc header record, file needs to be created with different columns and file name. Means..
    IDoc 01- Header Description contains 'A' - than file will be generated should have name as 'A.txt' and columns 'parent'  'child' 'descripion'.
    IDoc 02- Header Description contains 'B' - than file will be generated should have name as 'B.txt' and columns 'Name' 'Department' 'Description'.
    IDoc 10- Header Description contains 'J' - than file will be generated should have name as 'J.txt' and columns 'Order No'  'Materail' 'Description'.
    Hope this will give more clarity on my requirement. Please let me if you are still not clear on requirement.
    Thanks for your all help..
    Thanks & Regards
    Sreeni

  • How do I set Mail to display Name AND email address in the message

    I thought I used to have this setting and now I cannot find it (if there is one)
    Can't I set mail to show Name and email address in the address box both when creating a message and viewing one?
    thanks,
    tom

    Thanks, Ernie
    I wasted about 20 minutes looking for it and couldn't find it
    cheers,
    tom

  • Exchange 2013 outlook server name is my owa URL not hash

    i was migrating from exchange 2003 to 2010 to 2013.
    after the migration and i install the exchange 2013 with exchange 2010 and configured it. the outlook not working with users that migrated to exchange 2013, and working well with the users already existing on exchange 2010.
    when i try to fix this issue i set my outlook provider using this commend   Set-OutlookProvider EXPR -CertPrincipalName
    "msstd:mail.mydomain.com"
    but unfortunately it's impacted the server name in client outlook.
    then i removed the outlook provider and create it again. but with no change. then i uninstall the CAS server and install it again but with now change too.
    now the outlook server name is my URL "mail.mydomain.com" and i need to recover it to be hash like "[email protected]"
    the outlook client version outlook 2010 sp2 & and outlook 2013

    Hi,
    Is there any error when you connect your Exchange 2013 mailbox in Outlook? Also confirm if the problematic users can access Exchange 2013 mailbox from OWA.
    Generally, Outlook uses Autodiscover service to auto setup Exchange account in Outlook. We can check the Autodiscover service in Exchange 2013 (mail.mydomain.com is pointed to Exchange 2013):
    Get-ClientAccessServer | FL Identity,fqdn,*autodiscover*
    Set-OutlookAnywhere -Identity "Exch13\Rpc (Default Web Site)" -InternalHostname mail.mydomain.com -ExternalHostname mail.mydomain.com -InternalClientAuthenticationMethod Ntlm -ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsl
    $True -InternalClientsRequireSsl $true
    Also make sure the name which is used in the AutoDiscoverServiceInternalUri has been included in your Exchange certificate with
    IIS service. We can restart IIS service by running IISReset /noforce from a Command Prompt window.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually.

    Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually.  It gets weirder:
    When looking at the empty screen with the name of my former playlist on top,  if I tap the edit button on the phone, tap the + button to add a 'song' to the playlist, and then tap 'Done' without adding anything, I can see all my videos in the playlist with the red minus symbol next to each of them. But as soon as I tap 'Done' again they all disappear!
    I saw on another forum that someone has had the same problem but fixed it by, and I quote
    "If you go to Get Info and change the Media Kind from Movie to Music Video under the Options tab, they all now appear in the playlists!"
    I'm happy this worked for him, but when I tap "File" in itunes, the "Get info" field is greyed out, so I can't test the solution proposed.
    Any ideas?
    Thanks

    Same problem on my ipad 2...but it works well on my iphone 4s.
    Can somebody help me?
    Thank you

  • HT201493 When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

    When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

    The whole idea to an icloud account is that one user uses it and has all their devices synced together.  Different users need different Apple IDs to create their own icloud accounts.  Note that everyone can still use the same ID for an iTunes account (to share purchases).
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • In adobe Captivate I would like the person taking the quiz to write their name and then for that name to appear on the score page.  Anyone know how to do that?

    I have lessons created using Captivate that my high school students use.  I would like the student taking the test to type their name and have it appear on the score page so that they cannot share results.
    Otherwise kids can do these for HW and share it with their friends.
    thanks

    Supposing you don't use a LMS, this could be the work flow:
    Add a Text Entry Box in the beginning of the course to ask for the name. If you want to be sure that they really do enter a name, have a look at:
    Where is Null? - Captivate blog
    Each Text Entry Box has an associated user variable.It is created automatically with the same generic name as the TEB, but you could better use a more significant name for the user variable:
    Save Time: Create Associated Variable for Text Entry Box while Defining this TEB - Captivate blog
    On the Score slide, insert a text container (caption or shape) in which you insert the user variable, using the X button in the Properties panel of the text container; it will appear between $$ and be replaced by the value of the variable on runtime

  • Migration Exchange 2010 to Exchange 2013 with CAS Array and DAG

    Dear All,
    I am starting the migration of Exchange 2010 2 servers (CAS/Mailbox) with DAG no CAS Array to Exchange 2013 with 2 servers CAS array and 2 Mailbox servers with DAG. I read on some blogs that no requirement of CAS array on Exchange 2013. My concern how to
    configure NLB on CAS servers for the client to connect.
    Please guide and have any deployment guide for this, kindly share.
    Thanks

    Hi ,
    As you said there is no use and meaning of having the cas array in exchange 2013 and also thanks a lot to Microsoft for introducing an single namespace facility in exchange 2013.
    My suggestion and Microsoft recommendation should be to go with hardware load balancers for exchange 2013 rather than using the windows NLB and round robin method.
    Why we need to go for HLB ?
    Disadvantages
    of some load balancing methods :
    Windows
    NLB :-
    If you use Windows NLB then it can provide redundancy on server level failure and not on application level.
    DNS
    round robin :-
    In case if we use the windows round robin method for load balancing then it wouldn't provide server level
    and application level redundancy during the failures.At the Same time we need to manually adjust the DNS records during the server failure but on the client end dns caches will create the issues.
    Configuring NLB for exchange 2013 : 
    http://msexchangeguru.com/2013/08/14/windowsnlb/
    NLB configurations for exchange 2010 and 2013 will be same.
    Configuring round robin for exchange 2013 : 
    http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
    Advisable method is to have the CAS and MBX roles on the same box if NLB not comes it to play.Because windows failover clustering and NLB cannot be configured on the same box.In exchange 2013 cas role is a stateless server role so there is no need to have
    that role on a separate box.
    Thanks & Regards S.Nithyanandham

  • Exchange 2013 RTM, CU1, CU2 and CU3 are no longer supported.

    Exchange 2013 RTM, CU1 , CU2 and CU3 are no longer supported. 
    Before posting a question, please ensure you are at the latest CU.
    http://blogs.technet.com/b/rmilne/archive/2015/04/14/end-of-exchange-2013-rtm-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

    Exchange 2013 RTM, CU1 , CU2 and CU3 are no longer supported. 
    Before posting a question, please ensure you are at the latest CU.
    http://blogs.technet.com/b/rmilne/archive/2015/04/14/end-of-exchange-2013-rtm-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • I have someone else's facebook account syncing in my contacts.  Their names and pictures are connect to my actual contacts.

    have someone else's facebook account syncing in my contacts.  Their names and pictures are connect to my actual contacts.  How do I fix this?

    Contact Facebook

  • How do I put the file name and path into either the header or the footer?

    I need to keep track of pdf documents as their names or locations sometimes change.  I need to show both file name and path, preferably in the header.  I would also like it to refresh automatically when I change, say, the file name, but that's not as essential as the basic function of showing the file name and path.

    You will need to do this with a text field and a Javascript that executes on open.

  • Can't install Exchange 2013 after previous uninstall (insufficient user privileges with the same user)

    I have installed Exchange 2013 on Windows Server 2012, which ist a member of a Windows Server 2012 R2 Domain. All prerequisites and AD modifications were successfully  completed and I could install Exchange 2013. Unfortunately I made a mistake with
    the target directory and had to uninstal Exchange 2013. If I start the Setup again, it fails in prerequisite check - the current user should not be a member of Enterprise and Schema admin Group, but it's the same user, which comleted the previous Installation
    of Exchange 2013! Do you have any idea how to solve this Problem - I'm running out of ideas.

    Inhave tried to run setup /PrepareSchema again and get the following error in exchange setup log:
    [03.07.2014 19:25:53.0305] [0] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
    [03.07.2014 19:25:53.0337] [0] Validating options for the 0 requested roles
    [03.07.2014 19:25:53.0383] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
    [03.07.2014 19:25:53.0399] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    After removing all Exchange Parts by ADUC (advanced View) and ADSI Edit (Services) I'm able to install Exchnge 2013 again - the uninstall procedure seems not to work in a clean manner.

  • I can no longer use my aol on mac mail. When I set up the aol account name and password I get a message that says "Unable to verify account name or password". This is on all my Apple devices. Seems like an AOL server issue but no help from them!

    I can no longer make my AOL e mail work with Mac Mail on all my devices. When I try to set up the account and put in the correct aol account and password I get the message "Unable to verify account name or password". I know the account name and password is correct as I can open the AOL e mail page on Safari. I have changed the password, and it still does not work. AOL tech support has been no help. AOL email worked for years but last week due to suspected spam activity AOL locked my AOL account. I got that straightened out but now i cannot set it up on any of my devices: Macbook Air, Ipad, I pad mini and iPhone 6 without that message. I took everything to Apple store and everything is set up correctly on my devices. AOL tech support is no help and keeps giving me different solutions and answers, none of which has worked. Any solutions out there? All my Apple Software is up to date on all my devices

    Delete your Gmail account from the Mail/Contacts/Calendars settings page, and then add it back in using the new Gmail password.
    Matt

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for