Exchange Activesync and multiple smtp addresses in same domain

Hi,
Could anyone help with this if it is possible via Exchange Activesync or a third party software?:
I have a domain user called UserA with three smtp addresses in exchange server 2007SP3 (1 primary -
[email protected] ) and 2-secondary -
[email protected] and
[email protected] ).
The user has been successfullly setup on an iphone with Exchange Activesync using the primary address. Now, the management wants UserA to be setup to receive mails for the other two secondary addresses using the Domain username
UserA on the same iphone.
Our Exchange team have tested the practicality of this on the iphone and doesn't seems possible; the error was ''Can't create account- An identical Exchange account already exists''
when this was attempted on iphone. Is this error IOS related or EAS.
I have searched everywhere for any documentations from microsoft or any of the smart phone vendors (please point to any link that may exist) to confirm this as a proof to the management.
Thanks.
Ajagbe T.I.

I'm seeing this same limitation and I'm needing to determine if it is an ActiveSync limitation from Exchange or if it maybe is a limitation of the mobile device.
I have customers who are delegates for multiple exchange mailboxes. For the sake of example I'll use the following:
John Smith ([email protected]) is a delegate on a shared mailbox ([email protected]) and a delegate for his boss, Cheryl Thompson ([email protected]).
John has an Iphone 4S running IOS7. He adds his exchange account ([email protected]) and accesses email/contacts/calendars on that account with no issues.
Next he adds the shared mailbox by putting [email protected] in as the email address of the account, but he uses jsmith with his password as his user credentials. The account is added and John is able to access the shared mailbox and calendars for
this account.
When he trys to add the 3rd account for his boss, he uses his boss' email address ([email protected]) with his jsmith credentials and he gets the following error: "Cannot Create Account: An identical Exchange account already exists."
Any idea of whether this is an Exchange 2010 limitation or an IOS limitation? The infrastructure we are using is Exchange 2010.
Todd Boring
MD Anderson Cancer Center

Similar Messages

Emailing photo using MS Exchange Server sends multiple copies of the same email

Emailing 1 photo using Microsoft Outlook Exchange server sends multiple copies of the same email and photo. 50+ at last count. Also, since I emailed the photo to myself, then deleted these multiple copies from my inbox and sent items, my work Outlook exchange server will no longer sync. Is there a solution for this?
Post relates to: Pre p100eww (Sprint)

Thanks for your reply.
I have restarted multiple times. I have also removed and re-added outlook exchange email 3 times. This only affects exchange server email. I can send the photo from my gmail and it only receives 1 copy. I was wondering if this was a known issue and if someone had a fix for it. Otherwise would have to wait for the next WebOS update.

Difference between EAS(Exchange activesync) and EWS(Exchange web service)

What are the main differrences between EAS(Exchange activesync) and EWS(Exchange web service)...
I know the basic difference
that is EAS(Exchange activesync) is a set of protocol
and EWS(Exchange web service) is a web service....
Please explain me the difference

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

Is it possible to have multiple SOA Server within same domain ?

Hi All
I need to know whether I can install and setup multiple soa_servers inside the same domain so that they can be managed by single weblogic instance.
The use case scenario :
We have a single DEV environment instance that has several environments configured with it like PR1, PR2, TR, PY, PC.
The way we have achieved it is by creating partitions under soa_infra and deploying the code as we move up the ladder in testing phases before we move to separate QA and Prod.
Because of the way Dev is being setup, we are not able to use/test Oracle B2B properly because there is no way to have environment specific distinction be created in Oracle B2B.
In essence, at any point in time testing can happen only in one environment for out Dev box because it makes call to Oracle B2B (Trading Partners) and there is no way for us to distinguish whether the call is coming from PR1 or PR2 or PC or TR or PY.
We have no issue testing it as long as it is not restricted to B2B but with B2B we are restricted because a single soa instance has a single B2b instance. ( We can not have partition wise instances of B2B)
Requirement :
Is it possible to install and configure different soa_server for.e.g
soa_server1 : PR1
soa_server2 : PR2
soa_server3 : PY
soa_server4 : PC
soa_server5 : TR
inside the same domain (dev_domain) so that they can be managed from single weblogic instance through Admin console and we can have different B2B instances for each soa_server.
This way we will be able to differentiate between environments on the basis of ports with the same IP address.
Please let me know if there is a possibility of achieving the same.
Thank you so much in advance.
Regards
ACM

Thanks Sharmela for your directions.
Let me try to clone the soa server and see if it helps.
Before I move forward, I would like to verify one thing from you.
As you have mentioned the word "cluster" , I am not exactly trying to achieve the clustered setup "conventional way of load balancing and high availability" but instead I want to have these cloned soa servers( soa_server1 : 8001,soa_server2 : 8002,soa_server3 : 8003,soa_server4 : 8004,soa_server5:8005 )to have separate partitions ( PR1, PR2, PY, TR,PC) respectively.
I hope I don't have to configure OHS to access these nodes since I want these nodes be available as a separate instance rather than redirecting load in case of any other becoming unresponsive ( OHS configuration)
I am not sure whether I am making sense but all I need to do is point the PR1 instance having it's own port number(8001) to the PR1 instance of ERP.
I think it is doable but just wanted to double check with you.
Please let me know
Thank you

How do you host a domain and several email addresses from that domain with OS X Server?

Right now I have a domain name through GoDaddy.com and one email address to that domain...we will have about 5-8 in total...How do I setup OS X Server to host our own domain (without using GoDaddy) and setup our own mail server?

There are several steps that you would need to do.
Set up OS X Server with mail services and users. Also, you may have to have your OS X mail server relay messages through your ISP so you can email people at other domains.
Set up firewall/router to forward IMAP/POP and SMTP ports from your external IP address to your server (which is either in the DMZ of the firewall or on LAN).
Set up DNS records so your domain name points to your server (and if you do not have a static IP address, you will need to set up dynamic DNS). At a minimum you will need 2 DNS records: an A (or AAAA for IPv6) record for the server (I think it can be the root of the zone) and a MX (mail exchange) record.
If everything is set up correctly, you should have a mail server hosting on your domain with your server.
Those would be the major steps you would need to complete. Details on the exact procedure for each of these steps can be found reading the OS X Server documentation, documentation for your router/firewall for port forwarding/NAT, and your specific DNS service.

How to make multiple portals work in same domain (wlp 9.2)? IMPORTANT !!!

We have domain where one portal application is in production now and other portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning that in one's portal admin console shows only users/groups/roles to that portal.
How do I do this and what is the optional/best practises to do this kind of configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new portal but when the LDAP and database goes out of sync and I delete P13N -tables and LDAP, server start creates only to the first portal database the needed rows and delegated admin management doesn't work in the new one at all.
I have read all bea's documents related to JDBC - application scoping, deploying, security P13N and I can't get enough information from it to make this work.
Thanks !

You may want to ask in the weblogic.developer.interest.portal forum.
I don't believe that group and user/role management can be application
scoped.
<Tanja Puurula> wrote in message news:[email protected]..
We have domain where one portal application is in production now and other
portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using
application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning
that in one's portal admin console shows only users/groups/roles to that
portal.
How do I do this and what is the optional/best practises to do this kind of
configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new
portal but when the LDAP and database goes out of sync and I delete
P13N -tables and LDAP, server start creates only to the first portal
database the needed rows and delegated admin management doesn't work in the
new one at all.
I have read all bea's documents related to JDBC - application scoping,
deploying, security P13N and I can't get enough information from it to make
this work.
Thanks !

Exchange 2010 add new email address space and additional smtp address to all recipients

HI
Our company is being bought and we need to change the email address for every recipient within the business group/user.
I have added the new domain to the Accepted Domains and have confirmed that if I manually change a users smtp address that mail flow works and the postmaster account receives email.
looking in the E-mail address policies section within the EMC we currently have 2 polices one for the current company policy call company.co.uk with a priority 1 and one called Default policy.
when I try to edit these I get a warning message which states that this policy was created with an earlier version of exchange I have looked on our exchange 2003 environment and have found the polices and can edit them.
Now my questions are
1. should I create the policy on the exchange 2003 environment or 2010
2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
3. I must be able to preserve the old addresses and must make the new address space the primary address?
if anyone could help with the steps required or if there are any gotcha to avoid.
thanks

1. should I create the policy on the exchange 2003 environment or 2010
You have to create in Exchange2010
2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
Email address policy will change the email address if applied immediately except for the users which has "Automatically update email addresses based on e-mail address policy" option turned on
You will get the list of users with "Automatically update email addresses based on e-mail address policy" option turned off by the below command.
Get-Mailbox -ResultSize Unlimited | Where {$_.EmailAddressPolicyEnabled -eq $False}
3. I must be able to preserve the old addresses and must make the new address space the primary address?
Yes but you can keep only one as replying address.
Please keep both address in the email address policy to preserve old email address to the users.
If you want an autoreply, then use a hub transport rule in Exchange an Outlook rule and allow auto-replies to the internet. (auto-replies to the outside network is not a good idea)
Here is a similar case
http://exchangeserverpro.com/email-address-policies-in-mixed-exchange-20032007-organisations/
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange - Export only primary SMTP addresses

Hi SpiceHeads,
I'm looking for a script or help to write a script that simply dumps all primary SMTP addresses to a text file, one per line.
Everything I've found or even using exchange powershell includes additional fluff like names or alias's.
Any help would be appreciated.
This topic first appeared in the Spiceworks Community

I'm seeing this same limitation and I'm needing to determine if it is an ActiveSync limitation from Exchange or if it maybe is a limitation of the mobile device.
I have customers who are delegates for multiple exchange mailboxes. For the sake of example I'll use the following:
John Smith ([email protected]) is a delegate on a shared mailbox ([email protected]) and a delegate for his boss, Cheryl Thompson ([email protected]).
John has an Iphone 4S running IOS7. He adds his exchange account ([email protected]) and accesses email/contacts/calendars on that account with no issues.
Next he adds the shared mailbox by putting [email protected] in as the email address of the account, but he uses jsmith with his password as his user credentials. The account is added and John is able to access the shared mailbox and calendars for
this account.
When he trys to add the 3rd account for his boss, he uses his boss' email address ([email protected]) with his jsmith credentials and he gets the following error: "Cannot Create Account: An identical Exchange account already exists."
Any idea of whether this is an Exchange 2010 limitation or an IOS limitation? The infrastructure we are using is Exchange 2010.
Todd Boring
MD Anderson Cancer Center

Contact Objects and Primary SMTP address changes

We are going to be changing the primary SMTP address on a large number of contact objects. Does anyone know if simply removing the SMTP address of contacts will cause any issues?

Hi,
Please confirm if the “contact objects” in your posting mean the
Mail Contact in Exchange. Generally, the Primary SMTP address for the mail contact is the external email address for the contact.
If you want to change it to a different external email address, we can use EMS with "-PrimarySmtpAddress" parameter to change it. If you want to change the primary SMTP address for multiple mail contacts, we can create a .csv file with all changed
external e-mail addresses for these contacts. Then imports and uses the data in the .csv file to set the mail contact.
Import-CSV "C:\ChangedContacts.CSV" | ForEach-Object {Set-MailContact -Identity $_.Name -PrimarySmtpAddress $_.EmailAddress -EmailAddressPolicyEnabled $False}
Regards,
Winnie Liang
TechNet Community Support

Exchange ActiveSync and specially crafted messages cause ActiveSync/Email App to stop sync'ing

So, I think I've finally put together what the issue is with ActiveSync and Mail hanging on the Incredible, at least for me. When I recieve SharePoint Alerts, or Google Calendar invites, my Droid will stop syncing every time. If I find the message and delete it on my phone, the sync will start working again.
The two ways I've seen this happen are one, with SharePoint alerts. I have signed up to recieve alerts from SharePoint when content changes, or tasks are updated. These messages pretty much break sync every time. As soon as I delete one, it starts right back up until it hits the next one.
The other way I've seen sync stop working is when Google calendar invites are sent to me. The discription is usually really long, and has very long urls inside of it. It seems there must be some kind of limitation here in what ActiveSync can handle.
In both cases, as soon as I find the message that is holding everything up and delete it, sync returns to normal and starts working again.
We're running Exchange 2003... but will be migrating to Exchange 2010 soon. I'm wondering if this will helpl the issue.
Has anyone else noticed this issues like these with their Incredible and ActiveSync?
Is there another place I can submit this bug? HTC, Google?
Thanks,
Rob

I get this same problem. When I delete the sharepoint messages it works again. Anyone know a fix for this?

Cant open external links and multiple instances of the same profile.

I have multiple firefox profiles.
I constantly have two profiles running at the same time.
I use microsoft outlook and see an external link, I click it wishing firefox to open it in the default or new browser. It does not and says "FIrefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
Firefox is running fine.
How can I open external links with a profile based setup?
Also, how can I open multiple instances of the same profile? I find that if I click and drag a tab to another monitor, it opens a new "instance" or browser window.

You say
''I have multiple firefox profiles. <br />
I constantly have two profiles running at the same time. ''
So you will have discovered ''-no-remote'' Note NOT to use that on the default browser; profile, only on secondary profiles.
* http://kb.mozillazine.org/Profile_in_use#Common_causes
You will NOT be able to open multiple instances of the same profile, clone the profile if necessary.
If you are trying to run multiple Webmail accounts in one profile then you may well find the webmail is identifying and setting the user account that is opened. Use a Private Browsing window to get round that and open a second account.
* [[Private Browsing - Browse the web without saving information about the sites you visit]]

Exchange ActiveSync and alpha passcode

Hello,
What is the proper setting when using an EAS policy to force the iPhone (or iPad/iPod) to display the qwerty keyboard for the passcode without forcing a combination of complex characaters? Specifically, I want to set a six character password but I don't want the numeric keyboard to show up; I want to encourage the use of the alpha keyboard.
Ideally, I would prohibit the use of an all-numeric (10 character set) passcode and enforce a minimum 26 character set instead.
Thanks,

Not exactly - this forces numbers and letters. I want to force letters only, or at least show the letters on the keyboard by default.
If I use the IPCU, I can accomplish this by:
- Mininmum Passowrd Length: 6
- Require Alphanumeric Value: Checked
- Mininum number of complex characters: 0
Very frustrating that this seems not to be the case when using Exchange ActiveSync Policies.

Mail.app and multiple sender addresses?

I'm trying to figure out if Mail.app can be configured to have multiple sender addresses like Thunderbird can. The reason for this because I want to use "+" address for mailing lists.
Let me explain so there is no confusion. I sign up for a mailing list using the e-mail address: <username>+<listname>@gmail.com
I have setup Mail.app to connect to Gmail via pop and can download and send e-mail fine using <username>@gmail.com. However I need to be able to send e-mail as <username>+<listname>@gmail when I'm replying or posting to those mailing lists.
I can't seem to find a way in Mail.app to let me change who I'm sending as. Does anyone have a Mail.app solution to this problem?

Hello,
I never saw your original post.
I have not tried this specifically with a Gmail account, but don't see why it wouldn't work. See the Mail Help and the following Support doc link for email aliases:
http://docs.info.apple.com/article.html?artnum=302215
Those about .mac aliases do not apply.
Ernie

ITunes Match and multiple copies of the same song

I have multiple copies of the same song in my iTunes collection. For example, the song is on the original album, the "Best Of" album and on the "25th Anniversary" album.
Do we know how iTunes Match handle such situations?
MotionMan

Oh, and I forgot the live album, too!
MotionMan

Smart folders and multiple email addresses

My wife uses multiple email addresses. I've tried to set up a smart folder in my mail that would allow me to put multliple conditions that would allow me to have one smart folder that collects emails from her multiple accounts.
The problem I hsve is that it seems I can only have one email address per folder. If I create a second contition that has "contains" the second email address nothing appears in the folder.
Is this not possible with the mac mail program?

Hello,
I think the key is in the line here that says "that match->Any" instead of Match all of the following conditions..

Exchange Activesync and multiple smtp addresses in same domain

Similar Messages

Maybe you are looking for