Exchange Activesync through Relay? ASAP please

Hi guys,
I am having a requirement to configure Afaria in a network with DMZ. Everything is working fine, only port 443 opened into DMZ and 443 opened to DMZ from internal LAN. No ports opened inside internal LAN.
I have to configure Exchange, where Exchange activesync server is not published to the outside...It is not specified in A record, and cannot be accessed from internet, only intranet.
Is it possible to setup the Access control for email in a way that everything would go through Relay Server? I have a relay server in DMZ and would specifiy it as the Exchange server in a Nitrodesk configuration. I would also enable RS outbound enabler on Exchange server in the internal LAN. I would setup it like this on the picture, but use Relay server instead of the ISA.
Can this be achieved?
I would need the info FAST. I hope someone has some tips about this.
Thanks,
R

Hi NayNay92,
Thank you for your first post and welcome to the Nokia forums.
In order to get Mail for exchange for your device you will need to download the following application:
http://betalabs.nokia.com/apps/mail-for-exchange-for-asha
When you download this application you will need to login first. Please use the same login details you use for these forums.
Hope this helps.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

Versamail Exchange ActiveSync wireless push e-mail ONLY; Sync Contacts/Calendar via Desktop/USB

I use a 3rd party conduit, PalmPilot Link for Commence RM CRM software from Commence Corp. which works with the Palm Desktop sync engine to sync my Contacts, Calendar, Tasks and Memos. Recently I tested VersaMail 3.5.5 on my Rogers Treo 680 (despite zero support from Rogers) with push e-mail and loved it until I discovered I could no longer sync my Contacts and Calendar with Commence. Even with the options in VersaMail to sync Contacts and the Calendar unchecked they would not sync via the USB cable to Commence.
I have come across Palm Article ID: 42600 which states "Once you establish an Exchange ActiveSync account in VersaMail, you will not be able to sync Calendar, Contacts or Email through the USB HotSync cable". It would be nice if this wasn't the case when synching of Contacts and the Calendar are turned off. A call to technical support confirmed there is no way to do what I need with the current product version.
I have found a competitive product, RoadSync from DataViz does allow me to sync ONLY e-mail with ActiveSync so it would seem to be technically possible. The problem with RoadSync is it's not a true push e-mail on the Treo 680 as far as I can tell and it seems a little pricey with fewer features than VersaMail, except for one feature which is very important to anyone who depends on 3rd party conduits.
Please consider releasing a new version or a patch to allow synching Contacts and the Calendar via USB while using Exchange ActiveSync push e-mail.
Note: The Commence CRM product for Windows has been around for almost 20 years and has supported the Palm OS for about 10 years. Commence users everywhere would love this feature in VersaMail. I do not work for Commence Corp. but have been a user since 1991 and a Palm user since 1999.
Post relates to: Treo 680 (Rogers)
Message Edited by bws888 on 10-08-2008 07:47 AM
Message Edited by bws888 on 10-08-2008 07:49 AM

I can certainly submit this as a feature request.
Post relates to: None

Can Exchange activesync be used for calendar and contacts without BES?

I thought it could- just got a Z10 and am having trouble syncing with a cloud service that uses EAS Tech support just told me that I have to be on BES for that? Wasn't what I thought. Knowledge base article KB34208 "Sync time frame for calendar events when using a Microsoft Exchange ActiveSync connection " Says nothing about BES in the Environment section? http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB34208&sliceId=2&cmd=displayKC&d... Hoping guy was wrong- I really need to be able to get my desktop info onto phone and this is convoluted enough- syncing to cloud and then to phone but want to keep the phone (4th BB and a PB). Help please.

you dont need BES10. you can do EAS directly from the device to the Exchange Server.
zeki

Windows 8/8.1 devices, BitLocker and Exchange Activesync "Require encryption on device"

Recently I've been testing a change to our Exchange ActiveSync Policy , "Require encryption on device". This works fine for Windows 8 phones, all iOS devices and some Android. However, W8 tablets with BitLocker on have an issue getting Activesync
email.
Is BitLocker considered to be insufficient Encryption for an Exchange Activesync policy which enforces: "Require encryption on device".

Hi dude -d,
"Require encryption on device Select this check box to require encryption on the mobile phone. This increases security by encrypting all information on the mobile phone."
Here is a link for reference of this policy
View or Configure Exchange ActiveSync Mailbox Policy Properties
https://technet.microsoft.com/en-us/library/bb123994(v=exchg.141).aspx
Considering this policy is to increase the security by encrypting the device ,there maybe some conflicts here if the the device has been protected by the Bitlocker .This is just my own assumption.
To understand this policy more deeply ,it is recommended to ask for help from our Exchange Forum .They are more familiar with this policy and they may have more resources to help understand this issue .
Exchange Forum
https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

Difference between EAS(Exchange activesync) and EWS(Exchange web service)

What are the main differrences between EAS(Exchange activesync) and EWS(Exchange web service)...
I know the basic difference
that is EAS(Exchange activesync) is a set of protocol
and EWS(Exchange web service) is a web service....
Please explain me the difference

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

Office 365 Exchange ActiveSync Autodiscovery & iPad

Hi All,
The story:
We have configured Hybrid coexistence of our local exchnage server and office 365.
We are experiencing the problem with the configuring office 365 account using exchange activesync autodiscovery settings on the iPads and iPhones.
Outlook desktop clients are able to locate the settings automatically.
Only device which can locate servername and settings automatically using actiesync autodiscover is Windows Phone Device.
Per Microsoft:
Certain mobile device that won't autoconfigure this problem occurs if the mobile device does not fully support certain Exchange ActiveSync protocol requirements for redirection. Since we are not the provider of the OS for these devices we apologize as we cannot troubleshoot beyond the information provided to configure mobile devices.
This is a problem for us. Because if we want to migrate user's mailbox to cloud and he has configured the ActiveSync account after migration he need to reconfigure his active sync profile on his mobile device.
Can someone confirm that iOs devices might not fully support certain Exchange ActiveSync protocol requirements from Microsoft for redirection?

Hi
http://blogs.technet.com/b/canitpro/archive/2013/11/20/step-by-step-migrating-from-exchange-2007-to-office-365.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Iphone 3g with Exchange Activesync lackluster battery life

Hey fellow IPhone people!
I just bought my first Iphone and just returned my first Blackberry Storm in favor of the IPhone's superior UI.
I use Exchange Activesync to synchronize my company email/contacts/calendar with my IPhone. It seems to work well, however, I have noticed that it checks for new mail about every 5 or so seconds while I am in the mail application.
I have the settings set to manual and push for the Fetch of mail, however, it still seems to check for mail every 5-10 seconds.
Given this the battery life is terrible. By mid day my battery is more than half gone and I charge it fully each evening.
Has anyone else experienced this who is actively running Exchange Activesync?
Can this be a settings issue on either the IPhone or on Exchange?
Please advise if you have specific experience with this.
I think either I have a faulty iPhone battery or ??
Thanks !

There's something stuck in the Calendar sync...! You can check your phone's usage in the Setting-->General-->Usage... You will find the usage is abnormal high once you turn on Calendar sync with exchange. I have the same problem...2.1 didn't fix it. Now, the only thing I can do is turn on Calendar sync. But Contact and Email works fine. I found out this problem when I was doing a international travel...There's non-stop international data roaming communication between iPhone and Exchange which transmitted 100MB data in a morning, cost me US$2,000 !!!

Testing of Autodiscover for Exchange ActiveSync failed.

Hello Friends,
Attempting the Autodiscover and Exchange ActiveSync test (if requested). Testing of Autodiscover for Exchange ActiveSync failed.
Additional Details
Elapsed Time: 2573 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service couldn't be contacted successfully by any method.
Additional Details
Elapsed Time: 2573 ms.
Test Steps
Attempting to test potential Autodiscover URL https://domain.no/AutoDiscover/AutoDiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Test Steps
Attempting to resolve the host name domain.no in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host domain.no to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Test Steps
Attempting to test potential Autodiscover URL https://autodiscover.domain.no/AutoDiscover/AutoDiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 1087 ms.
Test Steps
Attempting to resolve the host name autodiscover.domain.no in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host autodiscover.domain.no to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 419 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.domain.no on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Validating the certificate name.
Certificate name validation failed.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl01_ctl02_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Elapsed Time: 630 ms.
Test Steps
Attempting to resolve the host name autodiscover.domain.no in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 80 on host autodiscover.domain.no to ensure it's listening and open.
The port was opened successfully.
Additional Details
The Microsoft Connectivity Analyzer is checking the host autodiscover.domain.no for an HTTP redirect to the Autodiscover service.
The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
Additional Details
Attempting to contact the Autodiscover service using the DNS SRV redirect method.
The Microsoft Connectivity Analyzer failed to contact the Autodiscover service using the DNS SRV redirect method.
Additional Details
Elapsed Time: 195 ms.
Test Steps
Attempting to locate SRV record _autodiscover._tcp.domain.no in DNS.
The Autodiscover SRV record wasn't found in DNS.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl03_ctl00_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details

Hi,
Please type the url below in IE and access it, see if there is certificate error.
https://autodiscover.domain.com/AutoDiscover/AutoDiscover.xml
Thanks,
Rebecca Tu
TechNet Community Support

Gmail Exchange Activesync Now Works??

So I had exchange activesync set up through gmail for my calendar and I had the mail turned on and it always gave an error because it didnt work with gmail. Well today all of a sudden it has started bringing the mail through. Anyone know if it official works now then?

Well I have been using it for Calendars and Contacts for quite some time now (with option for Mail turned off) and use IMAP for gMail (as I find this is just fine for me).
But pulling up their page about how to setup (same page I used before) after reading your post, I see them listing email push now.
http://www.google.com/mobile/products/sync.html#p=apple

Is business plan required to use Exchange ActiveSync

I have had people tell me yes and some tell me no. My plan has it (I was told it was required) but a collegue here at work has a 1G phone and 2.0 and no business plan and it seemed to connect fine to the Exchange server.
Can someone please clearly delineate for me what I get with the business plan that I wouldnt without it.

I have a 3G with the regular $70 plan ($40 for 450m voice and $30 for Unlimited Data) and a $5 text plan, so basically the same as the old $60 plan. I also have an exchange account that is ActiveSync capable. I am running push Mail, Contacts and Calendar just fine. So I would have to say, no you do not need a business plan.

Unable to setup Microsoft Exchange ActiveSync on BB Q5 with software 10.2.1.2102

hi.
i have downloaded lastest software 10.2.1.2102 on my Q5. i have an exchange 2013 package with Fasthost and my carrier is Vodafone. i set this up on my ipad and iphone no probs so i know password etc correct but whenever i try on BB it tells me that settings incorrect...which i know they are not. it was working fine with this software update and had some nice new features until i tried to add another exchange email account and because that didnt work i deleted them both and now i cant get either back on. i am using an IMAP account so emails r showing but i miss the exchange features.
in summary - why cant my BB Q5 accept an exchange account all of a sudden?
any help much appreciated...thanks in advance.
guy

Here are a few of my favorite links for testing EAS issues and getting a BB10 device to connect to an Exchange server with Active Sync
How to use Outlook Web Access to log Exchange ActiveSync activity for a single mailbox http://www.blackberry.com/btsc/KB34552
How to test Microsoft ActiveSync connectivity
http://www.blackberry.com/btsc/KB34024
Supported Microsoft ActiveSync Features and Policies for use with BlackBerry 10
http://www.blackberry.com/btsc/KB33619
How to add a Microsoft Exchange ActiveSync email account on the BlackBerry 10 smartphone
http://www.blackberry.com/btsc/KB33940
How to whitelist BlackBerry 10 smartphones and BlackBerry PlayBook tablets for use with Exchange Active Sync Gatekeeping
http://www.blackberry.com/btsc/KB33531
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Microsoft Exchange ActiveSync not working in Mobile Network – Blackberry Z10

Microsoft Exchange ActiveSync not working in Mobile Network – Blackberry Z10
I have set-up office email account in Microsoft Exchange ActiveSync this work only over office Wi-Fi not working outside of office Wi-Fi range. When I back to office all new e-mail loaded automatically. I have no problem with yahoo email setup in the same Z10 hand set work in both Wi-Fi and Mobile network. I have data plan with my carrier. Both emails were working in my previous Blackberry hand set Bold 9900. But with this New Z10 this become a problem
What could a the problem and I need help please

The URL you provided https://... does require SSL as it has a "s".
Have you tested the server OMA setup with a notebook or desktop (https://webmail.domain.com/OMA)?
You should receive a login prompt for username & password following by an Inbox listing of messages.
We used this step to verify server setup before configuring an iPhone. Lastly, we made certain that connectivity would work from outside or within our company by doing the following:
1) created A record for webmail.domain.com to a public IP that route through the firewall on 443 to the Exchange server's private IP - this handles external traffice
2) added an internal DNS record for webmail.domain.com to the private IP of the Exchange server.
This ensures that webmail.domain.com sync's to exchange from outside or from within the Enterprise.

Nokia E6 Exchange ActiveSync Problem: Unable to Sy...

Hi,
I am having problem with my Nokia e6 Exchange ActiveSync. I want to view/access my Google Calendar events in Nokia e6 calendar and Google Accounts in my phone's phonebook.
For this I went to Exchange ActiveSync and entered my gmail address in Mail address and then entered my gmail again for Username and then entered the password as well. After the setup was complete, it started loading all the inbox messages. However, when I went to Calendar on my Nokia e6, nothing could be seen from my Google Calendar and same happened with the contacts as well.
Guys, would you please me solve this problem.
Thanks,
Anvin

Hi Anvin,
Thanks for the feedback.
During the Exchange Active Sync setup you are reminded to not use any other sync method to sync contacts once the service is et up. Also after selecting contacts you are asked what to do with synced contacts, either keep or delete. You should choose keep.
During the first sync after setup the 'normal' contacts will get synchronized to your Google account. You will see them if you log in to http://contacts.google.com and as these are now part of your Google account they will be removed when you delete the Exchange Active Sync mailbox. You can sync you old contacts back after you removed the mailbox, but will loose any new additions as they are synced and kept in your Google account which in fact makes sense.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Exchange Activesync and multiple smtp addresses in same domain

Hi,
Could anyone help with this if it is possible via Exchange Activesync or a third party software?:
I have a domain user called UserA with three smtp addresses in exchange server 2007SP3 (1 primary -
[email protected] ) and 2-secondary -
[email protected] and
[email protected] ).
The user has been successfullly setup on an iphone with Exchange Activesync using the primary address. Now, the management wants UserA to be setup to receive mails for the other two secondary addresses using the Domain username
UserA on the same iphone.
Our Exchange team have tested the practicality of this on the iphone and doesn't seems possible; the error was ''Can't create account- An identical Exchange account already exists''
when this was attempted on iphone. Is this error IOS related or EAS.
I have searched everywhere for any documentations from microsoft or any of the smart phone vendors (please point to any link that may exist) to confirm this as a proof to the management.
Thanks.
Ajagbe T.I.

I'm seeing this same limitation and I'm needing to determine if it is an ActiveSync limitation from Exchange or if it maybe is a limitation of the mobile device.
I have customers who are delegates for multiple exchange mailboxes. For the sake of example I'll use the following:
John Smith ([email protected]) is a delegate on a shared mailbox ([email protected]) and a delegate for his boss, Cheryl Thompson ([email protected]).
John has an Iphone 4S running IOS7. He adds his exchange account ([email protected]) and accesses email/contacts/calendars on that account with no issues.
Next he adds the shared mailbox by putting [email protected] in as the email address of the account, but he uses jsmith with his password as his user credentials. The account is added and John is able to access the shared mailbox and calendars for
this account.
When he trys to add the 3rd account for his boss, he uses his boss' email address ([email protected]) with his jsmith credentials and he gets the following error: "Cannot Create Account: An identical Exchange account already exists."
Any idea of whether this is an Exchange 2010 limitation or an IOS limitation? The infrastructure we are using is Exchange 2010.
Todd Boring
MD Anderson Cancer Center

Exchange Activesync through Relay? ASAP please

Similar Messages

Maybe you are looking for