Exchange admin center ECP

Hello
I just installed exchange 2013 and I connect to the new url https://<CASServerName>/ecp
but the problem is that on the upper left corner I have only Outlook Web app
I dont have the enterprise TAB to create mailbox and to manage Exchange ?????????
ds

Hello,
When you use the url: https://CASServerName/ecp , if you want to access EAC, you need to have organization management permission.
Please use get-rolegroupmember "organization management" cmdlet to check if you are a member of management role group. If you don't have this permission, please use add-rolegroupmember "organization management" cmdlet to add your account to the management
role group.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

CANNOT ACCES EXCHANGE ADMIN CENTER (ECP) ON EXCHANGE SERVER 2013. GOT HTTP 500 INTERNAL SERVER ERROR

HI, I just installed Exchange server 2013 Standar SP1 on a windows server 2012. I have 3 servers one is a Domain Controller, the other one has the MBX role, and the last one the CAS role, first i installed the MBX and after the CAS role, i passed
prerequisite check without any issue. However when I tried access Exchange Admin Centre (ECP) at https:\\servername\ecp
I got HTTP 500 Internal Server Error saying "This website cannot display the page. Most likely causes: 1. The website is under maintenance. 2. The website has a programming error." I tried access ECP at https://localhost/ecp and
I got the same problem. Under either cases I was able to see the logon page of ECP and I was able to enter my credential (e.g. domain\user name, password). However I got HTTP 500 Internal Server Error at the next page.
I appreciate your help, on my case.

Hi,
The link that Jatin points to should be this.
https://social.technet.microsoft.com/Forums/en-US/2f64d305-e9e2-4f48-a5b4-4f72d7bca801/exchange-2013-owaecp-http-500-internal-server-error?forum=exchangesvrclients
Please view the Application Pool to check whether the version of .NET Framework is 4.0 and try the following command.
%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe –i.
If this does not help then please check if there is any warnings or errors in Event Log and take your time to post them for my further troubleshooting.
Thanks.

Exchange Admin Center 2013 SP1 worked for a day and then stopped working, possible OAB problems

Here is a problem that has me confused. On a fresh Windows Server 2012 R2, I installed Exchange 2013 SP1. It was successful and for the first day everything was working well. I then installed all security updates. The next day, I could no longer log in to
the Outlook Web App or Exchange Admin Center. I get the generic "something went wrong" message, and the only details are X-FEServer: LAKEVIEW-SERVER (our server name). Nothing else. In the event viewer, I have the logs below every time I try to log
in. This is repeatable. Every time I attempt to log in the same 3 things appear in the Application Log.
Event 1003, MSExchange Front End HTTP Proxy [Oab] An internal server error occurred. The unhandled exception was: System.Configuration.ConfigurationErrorsException: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Event 4999, MSExchange Common Watson report about to be sent for process id: 2460 (IIS Worker Process, w3wp.exe), with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangeOABAppPool, System.Web, S.W.C.HandlerFactoryCache.GetHandlerType,
S.Configuration.ConfigurationErrorsException, e0bc, 04.00.30319.34009. ErrorReportingEnabled: True
Event 1310, ASP.NET 4.0.30319.0 Event code: 3008 Event message: A configuration error has occurred. Event time: 5/8/2014 9:46:45 AM Event time (UTC): 5/8/2014 4:46:45 PM Event ID: 2c98a65728a7475db0212291e3934ab7
Event sequence: 19 Event occurrence: 9 Event detail code: 0 Application information:     Application domain: /LM/W3SVC/1/ROOT/OAB-1-130440407246522811     Trust level: Full     Application Virtual Path: /OAB
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\OAB\     Machine name: LAKEVIEW-SERVER Process information:     Process ID: 2460 (IIS Worker Process, w3wp.exe)
    Process name: w3wp.exe     Account name: NT AUTHORITY\SYSTEM Exception information:     Exception type: ConfigurationErrorsException     Exception message: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Request information:     Request URL: https://localhost:443/OAB/     Request path: /OAB/     User host address: ::1     User:     Is authenticated: False     Authentication
Type:     Thread account name: NT AUTHORITY\SYSTEM Thread information:     Thread ID: 18     Thread account name: NT AUTHORITY\SYSTEM     Is impersonating: False     Stack
trace:    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String type)
at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
My first guess is to reset the Outlook Address Book by using the Remove-OabVirtualDirectory Exchange commandlet. But I am not so sure this will work because Exchange worked for a day. Any help understanding what caused the problem (and thus help avoid it
happening again) and how to fix it are appreciated. Thanks.

hi,
If nothing works try resetting the Virtual Directories.
For owa
Open Exchange Management Shell (EMS), and then run the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication:
set-Owavirtualdirectory -identity "MBX\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false
-Formsauthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For ECP
Start Windows PowerShell.
Type the following commands, and then press Enter after each line:
Add-PSSnapin *exchange*
Set-EcpVirtualDirectory -Identity "MBX\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For Ref: http://technet.microsoft.com/en-us/library/bb123752(v=exchg.150).aspx
I did those commands. But remember, the original error I gave was related to the OAB virtual directory, not ECP or OWA. I also did the Remove-EcpVirtualDirectory, Remove-OabVirtualDirectory, and Remove-OwaVirtualDirectory commandlets and the corresponding
EcpVirtualDirectoryOabOwaVirtualDirecoty ones. I still cannot log in to the Exchange Admin Center. And I still have the same original generic unhelpful error message.
However, there are some changes. After I removed and re-added the virtual directories I no longer received the original error logs given above. I now get this log in the event viewer:
Event 2001, MSExchange Front End HTTP Proxy
[Owa] Failed to load SSL certificate.
The first logs I gave above always appeared after attempting to log in. This log that I gave appears infrequently and is not connected to any log in events. This log occurs only
after a similar log given below:
Event 1001, MSExchange Front End HTTP Proxy
[Owa] Application Starting.

Exchange Admin Center repeatedly asks for password

I have installed Exchange 2013 CU6 to be part of a hybrid in-house/Office365 email domain for a small non profit agency. Exchange seems to have installed correctly. However, I cannot log in to the Exchange Admin Center (or OWA, or ECP). The login screen
accepts the user name and password, blinks, and asks for the password again as if nothing happened. If I put in a bad password or user names, it give me a username/password failed error. Therefore, I know it is recognizing the correct password.
I have tried IE on the Exchange server and other domain computers, and all act the same way. I have created another account and Exchange enabled it, and it acts the same way all around. I cannot find any error messages on the Exchange server. The domain
and forest are at 2008 R2 levels, and all domain controllers are 2008 R2. The Exchange server is on 2012 (not R2).
I have done some searching and not found anyone else describing a similar problem.
Any suggestions?

Hi,
From your description, I recommend you use the following URL to access EAC and OWA to check the result.
https://%computername%/ecp?ExchClientVer=15
https://%computername%/OWA?ExchClientVer=15
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Error login to Exchange Admin Center

I am getting error as i login to Exchange Admin Center on IE. I am using Windows server 2012 R2 and IE version 11
I am able to login using firefox. I am doing the transition from Exchange 2k7 to 2k13
please do refer the screenshot.

Yes you can...
Install IE10 and check the issue.
Or, I hope windows 2012 R2 is up to date?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Disconnect mailbox not appear in Exchange admin center 2013

Hi,
I have installed exhange 2013. In the Exchange admin center, I have deleted user1 and disabled user2.
When I have looked under the connect a mailbox, there is no mailbox.
I am trying to assign disable mailbox to another user
Please advise
Thanks

Hello,
You may have to manually run the maintenance on the database before the next scheduled automatic activity for the same. The following cmdlet can help you: Remember to substitute your database name
Get-MailboxStatistics -Database "Database Name" | Where { $_.DisconnectReason -ne $null } | ForEach {Update-StoreMailboxState -Database $_.Database -Identity $_.MailboxGuid -Confirm:$false}
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

Problem with Exchange Admin Center Web page Layout.

Hello Everyone,
I am facing one problem in Exchange 2013 CU2, ECP web page.
when I enter the URL of ECP the page loads properly and after entering the user credentials the ECP layout changes. To resolve the issue I have tried resetting the ECP virtual directory but no luck.
Request you all to please suggest what can be done.
And for reference attached is the screenshot of the Page Layout.
Thanks in Advance.
Hasan Sayyed.
Regards, Hasan Sayyed

Hi,
It’s a display issue, not web.config file setting issue.
Thanks,
Simon Wu
TechNet Community Support

Exchange 2013 - Exchange Admin Center unable to login

Hello
I am experiencing issue with the ability to login to the ECP in Exchange 2013 SP1 living in Co-Exist with Exchange 2010 SP3.
It is very random, at times I can login and everything works fine, other time I try to login and nothing happens the page recycles back to the login page without outputting any error. I am trying to recreate the ECP virtual directory by the following:
Remove-EcpVirtualDirectory -Identity "2013CASSERVER\ecp (default Web site)"
And then recreating it. below is the output? Can anyone assist?
[PS] C:\Windows\system32>New-EcpVirtualDirectory "2013CASSERVER\ecp (default Web site)"
Creating a new session for implicit remoting of "New-EcpVirtualDirectory" command...
<RED TEXT>Argument: -Role ClientAccess
    + CategoryInfo          : InvalidArgument: (:) [New-EcpVirtualDirectory], ArgumentException
    + FullyQualifiedErrorId : [Server=2013MAILBOXSERVER,RequestId=ee3e37b7-0ec3-4697-ab51-8156a72bee1a,TimeStamp=7/24/2014 3
   :31:30 AM] [FailureCategory=Cmdlet-ArgumentException] 38C9FD83,Microsoft.Exchange.Management.SystemConfigurationTa
sks.NewEcpVirtualDirectory
    + PSComputerName        : 2013casserver.domain.local </REDTEXT>
[PS] C:\Windows\system32>

Hi,
Please make sure access the EAC by using the correct URL. If you’re in a coexistence scenario and your mailbox is still housed on the Exchange 2010 Mailbox server, we should access the EAC in Exchange 2013 by using the following URL: https://CAS15-NA/ecp?ExchClientVer=15.
Conversely, if you want to access the Exchange 2010 ECP and your mailbox resides on an Exchange 2013 Mailbox server, use the following URL: https://CAS14-NA/ecp?ExchClientVer=14.
To rebuild the ECP virtual directory in Exchange 2013, we can try the following commands:
Remove-EcpVirtualDirectory -Identity “Exch13\ecp (Default Web Site)”
New-EcpVirtualDirectory -Server Exch13 -WebSiteName "default Web site" -InternalUrl “https://Exch13.domain.com/ecp”
Remove-EcpVirtualDirectory -Identity "Exch13\ecp (Exchange Back End)"
New-EcpVirtualDirectory -WebSiteName "Exchange Back End" -Server Exch13
Then restart IIS service by running iisreset /noforce from a command prompt window.
Regards,
Winnie Liang
TechNet Community Support

Move request disappearing in exchange admin center!!

Hi
I was able to use 2013 EAC to move mailboxes without any issues. However out of nowhere there is a problem. When I try to move a mailbox using EAC, the job disappears immediately after I set it up!!!!. Event log shows an error. Event
id 9001 "could not contact migration services on serverXXX". The same thing is happening for users that are in 2013 DBs.
Powershell commands do not show anything either (get-moverequest). I am able to do the move using powershell in the meanwhile but EAC is broke when it comes to migrating mailboxes.
I have rebooted all exchange 2013 servers to no avail. All the services are running.
Would you please help?
Thanks

Hi
1. It happens on new & old mailboxes
2. Ask for the screenshots; getting the same result using both methods. It disappears
3. Firewall is enabled. I disabled it but didn't help anything.
4. I checked exchange servers in active directory users and computers. Inheritance box is checked
I guess I just had about enough of this nonsense. So I went into super detailed mode.
I deleted all the arbitration mailboxes including discovery & federation > propagated changes in AD > checked all DCs to make sure they don't exist > made sure exchange doesn't see them anymore > recreated them using setup /prepareAD >
propagated changes in AD > checked all DCs to make sure they exist all across > enabled the mailboxes using management shell with arbitration parameter > set the migration mailbox with management true parameter > propagated the changes AGAIN in
AD > stepped away for about 1 hour > checked for migration mailboxes in 2013 to be sure all of the new mailboxes are seen > tested using EAC =
Success
By the way recreating them does not put back the quota or display names. Not a big deal I guess.
Thank you all.

What is the search syntax when trying to filter recipients in Exchange Admin Center?

I'm hoping it's just an oversight on my part but, for the life of me, I can't figure out how to perform an advanced search. Interesting enough, when you start typing it provides tokens but there doesn't appear to be any wildcard options. As an
example we have a multi-tenant environment, and I want to search for all those whose email address contains "contoso" -- Zero results.
I think okay, perhaps I should use the ellipsis to jump into the Advanced search dialog. Same results -- zero. Oh wow, there's that handy Help link in the top-right corner. That will set me on the correct path. *Click* oh wow, it takes me to a TechNet Library
page titled "Recipients > Advanced Filter" but alas it is still waiting to be populated with content.
I've been hunting around but to no avail. It seems there clearly a push to use PS for any administrative tasks. As much as I'm on board with this, there is definitely
beauty is having a web-based console at my fingertips.
Perhaps we are expected to the same recipient filter syntax? -eq -ne -like

Hi,
EAC in Exchange 2013 is different from EMC in exchange 2010.The filter has changed and wildcards are not supported.
Sorry that the feature is unavailable at this time,for this feature you are concerning, we welcome you submit feedback
here for the further improvement of our product. If the service is requested frequently, the product team may include it in future product releases.
Thanks.
Niko Cheng
TechNet Community Support

Exchange Admin Center redirects to Office365

We are running Exchange 2013 in a hybrid mode connected to exchange online and exchange 2010 internally.
Whenever I go the url for EAC, it redirects me to OWA and sends me to my office365 inbox.
I have confirmed that I have Organization Management rights and have always (and still can) manage Exchange 2010 internally.
Has anyone else run into this situation?
Thanks

Hi,
Let’s begin with the following article:
http://blogs.technet.com/b/exchange/archive/2012/09/20/the-cloud-on-your-terms-part-ii-managing-hybrid.aspx
And I’d like to say it’s an expected behavior that an error will appear if you modify recipients in hybrid mode from the “Office 365” side as this would result in the recipient being out-of-date on one side of the cross-premises deployment. In fact, this
operation is blocked by Role-Based Access Control (RBAC) runtime validation rules to prevent divergence of copies (see the error message below).
Thus, before we go further, I’d like to ask the following questions:
1. What’s the detail error?
2. How do you manage your Exchange server when the issue happens?
Thanks,
Angela Shi
TechNet Community Support

New User creating through Exchange Admin Center -"Exception has been thrown by the target of an invocation"

facing problem in creating new user through EAC. through shell its ok. but when i tried through EAC it stuck selecting OU with error
"Exception has been thrown by the target of an invocation".. i have multiple child doman user scenario ..
its stucks at screen shot 2- and keep on prompting please wait ...
help will be appreciated.

Why would you go for nested OU inside the default OUs? ;-)
i have more then 1 domain controllers and sites .. it was done to implement different policies on different DCs .. and to standardize the things in better way
Are you saying that you had an empty OU in the root domain, which caused the error?
no the error way bcos of my domain controllers were in nested OU .. i move them to root OU .. at the same time i remove
empty OU in my domain (it was for test purpose etc.). not sure if the empty OU were also causing problem .. but for sure it were nested OU under "domain controllers OU" ...

Exchange Server 2013 In Windows Server 2012 - unable to logon EXchange Administrator Center (EAC)

Hi All,
I Just installed Exchange Server 2013 in Windows Server 2012 and trying to connect Dynamics CRM 2013 (DNS).
The Installations Success full but unable to load the EAC page by using the following URL
https://servername:port/owa/auth/logon.aspx
I have cross checked in Exchange/owa/auth folder don't have the "logon.aspx" file
But the auth folder have the "logoff.aspx"
I installed many time freshly in separate WS-2012 but it not contains that logon.aspx
I want access the Exchange Administrator Center
Please Help me to solve it
IIS Exchange (Missing of logon.aspx)
SRKD0808

Hi All,
I sorted out this problem
Actually we have to run these 2 commands in Domain Control, But what i did I just run this
1) setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Command in Domain Control we don't need to run the 2nd command, Because I already try to installed exchange 2013 very first time it success and after some modifications
it gone.
That time it will ask you to provide Organization name, Once you give that it will create the Organization name in Domain control and it will save the settings when
you install first time
Because of this reason It is failing to run these 2 command
Finally what i did I just revert back my Domain control snapshot & Exchange server as well
Then i started freshly Installation in DC and Exchange server 2013 successfully installed
URL http://servername/ecp/default.aspx
Whole Process will be here
Exchange Server 2013 Step by Step Installation In Windows Server 2012
SRKD0808

Can't delete a Site Collection from SharePoint admin center completely

Hi All
I'm using Office365. And I wanted to delete a Site Collection from SharePoint admin center.
But at first, I couldn't delete it from there. So I opened the Site and delete it from the Site setting successfully.
Then I went back to SharePoint admin center to check it was deleted or not completely.
But the Site Collection was still on the Site Collections list.....
Things I did are
1. IE -> Tools->Internet Options-> In General Tab click on Delete in browsing history section and check all options and again click on delete.
2. Close and re-open the browser and sign back in
I wanna make free server resource to create new Site Collection.
Does anyone know how to delete a Site Collection completely?

Hi,
Can you try delete the site collection using SharePoint online power shell command? Refer the following link for that.
Delete site collection
Also, while deleting site collection from Admin Center, do you get any warning?Or what are steps you follow to delete the Site Collection from Admin Center?
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

Oracle BPM Admin Center Configuration

Hi All,
I am trying to configure the Oracle BPM Admin Center but i am getting the following error.plz can any one reply if you have any idea.....
Configuring Oracle BPM.....
Could not create Schema.
fuego
Detail Cause :An error occured while executing an operation in database:'[BEA][OracleJDBC Driver][Oracle] ORA-28000:The account is locked
The Database URL is jdbc:bea:oracle://localhost.localdomain:1521;SID=ORCL'
Please respond if any solutions
Thank you.

Thanks .its helpful but the new error that i am getting while executing the WLST script as follows:
No Weblogic Server running on specified host and port
Creating connector [fuego:SQL]
java.sql.SQLException: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
at albpm.jdbc.base.BaseExceptions.createException(Unknown Source)
at albpm.jdbc.base.BaseExceptions.getException(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.open(Unknown Source)
at albpm.jdbc.base.BaseConnection.connect(Unknown Source)
at albpm.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
at albpm.jdbc.base.BaseConnection.open(Unknown Source)
at albpm.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at fuego.database.datadirect.oracle.DataDirectOracleDatabaseManager.systemConnect(DataDirectOracleDatabaseManager.java:615)
at fuego.database.datadirect.oracle.DataDirectOracleDatabaseManager.createUser(DataDirectOracleDatabaseManager.java:197)
at fuego.jdbc.DatabaseManager.createUser(DatabaseManager.java:648)
at fuego.directory.provider.jdbc.JDBCFactory.createInternalSchema(JDBCFactory.java:584)
at fuego.directory.provider.jdbc.JDBCFactory.createSchema(JDBCFactory.java:199)
at fuego.directory.Directory.createSchema(Directory.java:94)
at fuego.config.common.BPMConfiguration.createDirectory(BPMConfiguration.java:384)
at fuego.configwizard.ConfigWizard.executeWizard(ConfigWizard.java:227)
at fuego.configwizard.ExecutionStep$ExecutionStepPanel$1.run(ExecutionStep.java:113)
at fuego.ui.peer.swing.SwingToolkit$TaskFromBooleanTask.run(SwingToolkit.java:181)
at foxtrot.AbstractWorkerThread$2.run(AbstractWorkerThread.java:49)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:45)
at foxtrot.workers.DefaultWorkerThread.run(DefaultWorkerThread.java:153)
at java.lang.Thread.run(Unknown Source)
Could not create schema.
fuego
Detail:Cause: An error occurred when executing an operation in database: '[BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused'.
The database URL is: 'jdbc:bea:oracle://localhost.localdomain:1521;SID=ORCL'.
Caused by: An error occurred when executing an operation in database: '[BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused'.
The database URL is: 'jdbc:bea:oracle://localhost.localdomain:1521;SID=ORCL'.
Caused by: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
Caused by: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
Caused by: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
Caused by: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
Caused by: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
The database URL is: 'jdbc:bea:oracle://localhost.localdomain:1521;SID=ORCL'.
at fuego.directory.exception.CouldNotCreateSchemaException.create(CouldNotCreateSchemaException.java:63)
at fuego.directory.provider.jdbc.JDBCFactory.createInternalSchema(JDBCFactory.java:595)
at fuego.directory.provider.jdbc.JDBCFactory.createSchema(JDBCFactory.java:199)
at fuego.directory.Directory.createSchema(Directory.java:94)
at fuego.config.common.BPMConfiguration.createDirectory(BPMConfiguration.java:384)
at fuego.configwizard.ConfigWizard.executeWizard(ConfigWizard.java:227)
at fuego.configwizard.ExecutionStep$ExecutionStepPanel$1.run(ExecutionStep.java:113)
at fuego.ui.peer.swing.SwingToolkit$TaskFromBooleanTask.run(SwingToolkit.java:181)
at foxtrot.AbstractWorkerThread$2.run(AbstractWorkerThread.java:49)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:45)
at foxtrot.workers.DefaultWorkerThread.run(DefaultWorkerThread.java:153)
at java.lang.Thread.run(Unknown Source)
Caused by: fuego.sql.DatabaseException: An error occurred when executing an operation in database: '[BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused'.
The database URL is: 'jdbc:bea:oracle://localhost.localdomain:1521;SID=ORCL'.
at fuego.sql.DatabaseException.checkException(DatabaseException.java:115)
at fuego.database.datadirect.oracle.DataDirectOracleDatabaseManager.createUser(DataDirectOracleDatabaseManager.java:211)
at fuego.jdbc.DatabaseManager.createUser(DatabaseManager.java:648)
at fuego.directory.provider.jdbc.JDBCFactory.createInternalSchema(JDBCFactory.java:584)
... 11 more
Caused by: java.sql.SQLException: [BEA][Oracle JDBC Driver]Error establishing socket to host and port: localhost.localdomain:1521. Reason: Connection refused
at albpm.jdbc.base.BaseExceptions.createException(Unknown Source)
at albpm.jdbc.base.BaseExceptions.getException(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)
at albpm.jdbc.oracle.OracleImplConnection.open(Unknown Source)
at albpm.jdbc.base.BaseConnection.connect(Unknown Source)
at albpm.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
at albpm.jdbc.base.BaseConnection.open(Unknown Source)
at albpm.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at fuego.database.datadirect.oracle.DataDirectOracleDatabaseManager.systemConnect(DataDirectOracleDatabaseManager.java:615)
at fuego.database.datadirect.oracle.DataDirectOracleDatabaseManager.createUser(DataDirectOracleDatabaseManager.java:197)
... 13 more
ErrorError
The specified path for WebLogic Home is not valid. For example, a valid Weblogic Home for WLS 10.0 could be c:\bea\wlserver_10.0 or /bea/wlserver_10.0
ErrorError
The specified path for WebLogic Home is not valid. For example, a valid Weblogic Home for WLS 10.0 could be c:\bea\wlserver_10.0 or /bea/wlserver_10.0
ErrorError
The specified path for WebLogic Home is not valid. For example, a valid Weblogic Home for WLS 10.0 could be c:\bea\wlserver_10.0 or /bea/wlserver_10.0
ErrorError
No Weblogic Server running on specified host and port
QuestionConfirm Action
Do you want to cancel this wizard?

Exchange admin center ECP

Similar Messages

Maybe you are looking for