Exchange and Kuler Won't Connect Online

Every time I try to use Adobe Exchange or Kuler in any of the CS 6 Design Standard Applications, the panel displays a message saying it can't connect to the service. But if I check for updates in the Exchange Panel it says no updates are available so this would indicate it can connect. All other connections from Adobe applications seem to be working. I have all the latest updates and am running CS 6 on Mac OS X Mountain Lion. Any help is appreciated. Thanks.

Hi there,
Do you see any products or any content showing in either panel? Maybe you cpuld post a screenshot so it's easier to see what's going on.
Thanks,
Jonathan

Similar Messages

HT4623 My iPad won't load an update and therefore now won't connect online. Csan anyone Help?

My iPad won't update and therefore can't connect online. Please help! Why won't it update?

Try booting your I pad.

My airport express and utility won't connect....

I'm receiving errors when trying to connect either Airfoil or Aiport Utility.
Airfoil keeps telling me that I need to turn it on.
Aiport Utility recognizes that the express it there but yet won't connect in order for me to configure. It gives me the error message "Make Sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
I've restarted the Express, I've hard reset it. I've reinstalled the Airport Utility and still no luck. I've even tried connecting through itunes and it won't connect. Itunes recognizes that my express is there it just won't connect.
I've upgraded the aiport utility to 5.5.3 and the Airport Express to 7.6.
Is anyone experiencing this problem and if so, have you resolved it? After doing extensive searches online it doesn't seem that anyone has figured this out and possibly a problem with the firmware!
Let me know please!
Andrew

That page won't load for me. Any suggestions?
You can find it here:
http://discussions.apple.com/thread.jspa?messageID=1113575
There was a change in the forum software which means that the previous link is now dead, but the message is still available.
iFelix

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

See:
iOS: Device not recognized in iTunes for Windows
You need iTunes version 10.7

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connecti

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connection is fine Safari works and I can access all sites. I have an iPad 2. Any help on this will be greatly appreciate. iPad 2, iOS 8.3

This is an ongoing problem as you will see by searching the forum.
Out of curiosity, do you have 2 step verification enabled? It was recently extended to include iMessage & FaceTime & I'm wondering if it might be causing some of the issues that some users are experiencing.

My wireless keyboard and trackpad won't connect and i can't sign in

my wireless keyboard and trackpad won't connect and i can't sign in. yesterday I tested it with my mac air and it worked fine. i deleted the connection from my mac air and tried it again. then it worded. howerver, i shut down my computer correctly and tried it again today. now the same problem again.
HELP!!

no, just a usb mouse. but I found an old usb bluetooth hardware. this made it possible for me to make it work. but as soon as I remove the hardware it says "no bluetooth available"! I re-istalled mountain lion but still the same problem.
additionally I deleted/reset the PRAM. still the same problem.

My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

QJackCTL, Catia, and Cadence won't connect to jackdbus?

When I install jack2 and qjackctl, jackd starts and runs nicely; but when I install jack2-dbus, jackdbus runs fine (according to many tests via ps and jack_control), but qjackctl does not show it running and won't show a patchbay, and Catia and Cadence won't connect either. I have added myself to the "audio" group, no change. What am I missing?

afaik this is simply because qjackctl don't support the dbus interface in jack2. probably the same with catia and cadence.
if I start jackdbus via jack_control before I launch qjackctl, it recognizes that the jack server is started and works fine for me though (as do any other jack application), apart from starting and stopping the server.

Both iPod and iPad won't connect after update.

Both iPod and iPad won't connect after update. iTunes says "can't allocate a resource"

I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
Follow these steps to reset the Lockdown folder:
Disconnect all iOS devices from your computer and quit iTunes.
From the Finder, choose Go > Go to folder.
Type the following and then press Return:
/var/db/lockdown.
The Finder window should display one or more files with long alphanumeric file names.
In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
Reconnect your iOS device and open iTunes
My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested

When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested. VER FF 3.6.6. Windows7; 64 bit.

I have currently FF 3.6.8 running under Windows XP 32 bit. I am using Multiproxy Switch ver 1.33 add-on to switch between multiple proxies.
My FF starting page is http://www.google.com/ncr . When I start Firefox and the actually configured proxy is unreachable, I get the usual message that the page cannot be opened ("Try again"). Then I switch to another proxy or to direct connection. Normally the desired page (google) opens. But in case I switch the proxy before the error message appears, this grayed message "Search Bookmarks and History" appears instead of the URL in the URL input field and I have to retype the URL.
Remark: I would really like to have this function "Searching Bookmarks and History" available in Firefox, because I often do this kind of search and need 4 clicks to get there (Bookmarks-Organize Bookmarks-Bookmarks Menu-and then input my search criteria).

Just bought a N95 and it won't connect to my provi...

just bought a N95 from ebay from a very good seller and it won't connect to my provider which is ATT.
It connected at my house, but won't connect at work which strangely enough I sell ATT service(I am a dealer).
any tricks or do I have to do something on the computer before I can use the phone?

are you talking about connecting to a wi-fi network? r u sure your work network is open? or do u know the password?
Nexu 5

Mozilla just did an update and now won't connect to "proxy servers"

Mozilla just did an update and now won't connect to "proxy servers".
== This happened ==
Every time Firefox opened

Maybe this article will help: [[Cannot connect after upgrading Firefox]]

HT4623 phone is locked with a passcode and I don't have the passode, it says connect to itunes, and itunes won't connect because it says to enter passcode on phone. The device also does not show in itunes so I can't restore

iphone 4s is disabled. It says connect to itunes. Itunes ays could not connect because phone is locked with a passcode and to enter passcode on iphone before it can be used with itunes, but I can't enter the passcode because 1) don't know it 2) it's disabled. The device also does not show up in itunes, so how can I restore the phone or unlock it?

Same answer as last time you asked the exact same question:
HT1430 Iphone 4s says disabled connect to itunes and itunes won't connect because phone locked with a passcode. I don't have the passcode to unlock the phone

Spinning gear appears and I won't connect to home from the Creative Cloud Desktop.

Spinning gear appears and I won't connect to home from the Creative Cloud Desktop.

Please follow the steps in:
CC Spinning Blue Wheel under 'Home' or 'Apps'?
Creative Cloud Desktop App stuck on blue spinning wheel after update.
Hope it helps you.
Regards
Rajshree

Exchange and Kuler Won't Connect Online

Similar Messages

Maybe you are looking for