Exchange Configuration
I've now upgraded to OS4 and am hoping that I can now use my iPhone to access both my Gmail account AND my work e-mail.
My Gmail is connected and always has been. I've been trying to configure my work account using my network username and password and getting the mail server details from Outlook > Tools > Options > Mail Setup > E-mail Accounts > View or change existing e-mail accounts > Next > Select Exchange Account > Change and then taking the details from the MS Exchange Server box and entering them in the Server box on the Exchange config on my iphone, leaving the domain blank. I am then told that the account information cannot be verified.
On a secondary note I have e-mails in my Gmail account that I can see via Safari/IE but they do not appear through the mail function on the iphone?
Any help appreciated.
Cheers
Try this
http://help.sap.com/saphelp_nw04/helpdata/en/33/c02940cbf2195de10000000a1550b0/frameset.htm
Message was edited by: Eric Johnson
Similar Messages
-
Hello,
I am getting the error message listed in the topic subject when i try to install the Exchange Server 2013 SP1 Evaluation Mode downloaded from your website. After completing all requirements & pre-requisites, I started the installation with the Mailbox
& Client Access role selected, when i get to the screen which says "Readiness Check" main page subject, and the progress says Configuring Prerequisites, before any progress in the %, i get the error message:
The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception
and it says retry.
Knowing that the server is a member of a domain.How would i resolve this issue?
Thanks,
Eliehi Ed,
i am running Windows Server 2012 R2 Standard Evaluation Edition with Exchange Server 2013 Evaluation, But that error message was resolved by removing and re-installing .NET Framework 3.5. That is fine now.
But now i am getting another error message When it tries to install the Management Tools.
(Step 1 of 9: Management Tools)
Error: The Following error was generated when "$error.Clear();
Set-LocalPermissions
"was run: "The process does not possess the 'SeSecurityPrivilege' privilege which is required for this operation"'
knowing that the server is part of a domain and the domain controller runs Windows Server 2008 R2 Evaluation Edition.
Any ideas why this error message popups up?
Regards, -
There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
Is there any known fix for this issue?Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
The exact error is...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of? -
having problems on new server so I followed instructions to remove Exchange Server 2013 Sp1 using ADSI edit p;er these instructions:
http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
now when I re-run setup for exchange 2013 SP1 I get the error :
"Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."
David Sheetz MCPcontrary to what Ed says you can fix this, it is way harder than it should be and I have NEVER had this many issues on a fresh build!
things to note on Exchange 2013
1. IPv6 MUST work and also DNS set manually, verify port 25 is open on your firewalls!
2. even if services are running make sure there are no errors in the application event log and check that all services on the Exchange server are set to ACTIVE. to find out type the below command in exchange management shell
Get-ServerComponentState –Identity servername
3. The group "everyone" did not have the right "Access this computer from the network". This could be seen by an audit failure in the security log stating that the user
"<mailbox server name>" did not have the required login type (login type 3).
Adding everyone to the "Access this computer from the network" right solved the issue.
To enable "Access this computer from the network" :
Run "gpedit.msc"
Navigate through
Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment
Double click
on "Access this computer from the network", and ensure "Everyone" is added.
4. verify all connectors are setup correctly
Also I found an error in the event log Event
ID: 1009 once I fixed that emails started to fly!
To resolve the issue, use one of the following methods.
Method 1
Create a new Active Directory group that is named “ContentSubmitters,” and then grant Admistrators and NetworkService full access to the group. This is a dummy group and should be used as a placeholder only. You might want to add a description so that
the group is not removed.
Force or wait for Active Directory replication.
Restart the following services:
Microsoft Exchange Search
Microsoft Exchange Search Host Controller
Method 2
You can also resolve this problem by removing a configuration entry that refers to the ContentSubmitters group. This entry is present in four files. Each file is calledWcfConfigurator.xml,
and you can find each file in the following folder:
%ExchangeInstallPath%\Bin\Search\Ceres\HostController\Data\Nodes\Fsis\<var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var>\Configuration\Local
Here, “%ExchangeInstallPath%” is the Exchange installation root path (available in the environment variable of that name), and the placeholder <var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var> represents
one of the following names. (There is one name for each of the four files that are to be edited.)
Helpful articles
http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
http://exchangeserverpro.com/exchange-2013-manually-configure-dns-lookups/
David Sheetz MCP -
Error while Provisioning a user to Exchange:Configuration OIM 9.1 & JBOSS
Hi,
I am facing the below error while provisioning a user to Exchange. The Resource gets provisioned. But inside the resource, two tasks (Create User & Set Mailbox) are rejected. When i retry these tasks, the Resource status is set to Revoked in the Resource Profile of OIM. The AD Provisioning is working fine. There are 2 AD IT Resources here. Database is Oracle 10g.
Error:
2012-03-02 15:06:10,347 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'RWFLORENCIO' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:06:34,712 INFO [STDOUT] Running GETFULLNAME
2012-03-02 15:06:34,712 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:06:34,721 INFO [STDOUT] Running GETMANAGER
2012-03-02 15:06:34,721 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavri15-1iti
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:07:00,233 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:07:55,208 INFO [STDOUT] Running IDMVALIDATION
2012-03-02 15:07:55,208 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,267 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:07:55,267 INFO [STDOUT] result : OK
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETKEY
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETIH1
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,614 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavssb3-1itk
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:08:00,207 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:08:16,901 INFO [STDOUT] Masuk exception
2012-03-02 15:08:16,988 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,000 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,016 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,030 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,046 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,304 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'XELSYSADM' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavu2lc-1itr
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:09:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:09:16,525 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,526 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:16,642 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,643 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:17,139 INFO [STDOUT] Running CHECKCHILDOBJECT
2012-03-02 15:09:17,139 INFO [STDOUT] Target Class = gitidm.CheckEmptyChild
2012-03-02 15:09:17,217 INFO [STDOUT] Connected to IAM
2012-03-02 15:09:17,218 INFO [STDOUT] Query : select * from UD_EMAILOF join obi on obi.obi_key=UD_EMAILOF.obi_key join UD_MAILFOC on UD_MAILFOC.UD_EMAILOF_KEY=UD_EMAILOF.UD_EMAILOF_KEY where obi.req_key='44002'
2012-03-02 15:09:17,228 INFO [STDOUT] Total record : 1
2012-03-02 15:09:17,228 INFO [STDOUT] Is Admin not filled the child form ? FILLED
2012-03-02 15:09:17,231 INFO [STDOUT] Disconnected from IAM
2012-03-02 15:09:17,606 INFO [STDOUT] Running SETPROXYADDRESS
2012-03-02 15:09:17,607 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:17,622 INFO [STDOUT] SetProxyAddressForSubsidiary
2012-03-02 15:09:17,622 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:17,623 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:17,701 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Set Proxy Address','FAILED','NO')
2012-03-02 15:09:18,870 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:09:18,870 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:09:18,945 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:09:18,945 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:18,961 INFO [STDOUT] GetDN
2012-03-02 15:09:18,991 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:09:18,991 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:09:18,991 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:19,019 INFO [STDOUT] EnableMailbox
2012-03-02 15:09:19,020 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:09:50,426 INFO [STDOUT] error ->Could not connect for 30000 milliseconds
2012-03-02 15:09:51,428 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:09:51,428 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:51,428 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:51,502 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Enable Mailbox','FAILED','Could not connect for 30000 milliseconds')
2012-03-02 15:09:53,940 INFO [STDOUT] Running SETMAILBOX
2012-03-02 15:09:53,940 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:53,959 INFO [STDOUT] userssh ->Administrator
2012-03-02 15:09:53,959 INFO [STDOUT] userid ->ISSECLAB\Administrator
2012-03-02 15:10:00,461 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd3h-1itu
2012-03-02 15:10:00,462 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,462 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd6p-1itv
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,578 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:10:07,034 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:10:25,353 INFO [STDOUT] Could not connect for 30000 milliseconds
2012-03-02 15:10:26,357 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:11:00,222 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavwn7i-1itx
2012-03-02 15:11:00,223 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:11:00,223 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:11:51,773 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:12:00,219 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavxxi3-1itz
2012-03-02 15:12:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:12:00,220 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavz7t1-1iu2
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:13:00,229 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw0i2o-1iu5
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:14:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1sex-1iu7
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,249 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:00,591 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:15:00,592 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1ss0-1iu9
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,728 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:06,711 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:15:18,066 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw32os-1iub
2012-03-02 15:16:00,221 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:16:00,221 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:16:00,536 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,538 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,539 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw4cyw-1iud
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:17:00,201 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:18:00,209 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw5n9t-1iuf
2012-03-02 15:18:00,210 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:18:00,210 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:00,211 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw6xkj-1iuh
2012-03-02 15:19:00,212 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:19:00,212 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:21,833 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:20:00,500 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8838-1iuk
2012-03-02 15:20:00,501 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,501 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,673 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8881-1iul
2012-03-02 15:20:00,674 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,674 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,930 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:20:00,931 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:20:07,489 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw9i8g-1iun
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:21:00,306 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:22:00,281 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawasih-1iup
2012-03-02 15:22:00,282 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:22:00,282 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:00,303 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawc2tl-1iur
2012-03-02 15:23:00,304 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:23:00,304 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:27,310 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:23:27,312 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:23:27,413 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:23:27,414 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,432 INFO [STDOUT] GetDN
2012-03-02 15:23:27,473 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:23:27,473 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:23:27,474 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,495 INFO [STDOUT] EnableMailbox
2012-03-02 15:23:27,496 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:23:55,851 WARN [org.jboss.tm.TransactionImpl] Transaction TransactionImpl:XidImpl[FormatId=257, GlobalId=oim1.isseclab.net/5544083, BranchQual=, localId=5544083] timed out. status=STATUS_ACTIVE
2012-03-02 15:23:55,874 WARN [XELLERATE.DATABASE] Trying to get the connection count : 0
2012-03-02 15:23:55,875 WARN [XELLERATE.DATABASE] Trying to get the connection count : 1
2012-03-02 15:23:55,876 WARN [XELLERATE.DATABASE] Trying to get the connection count : 2
2012-03-02 15:23:55,877 WARN [XELLERATE.DATABASE] Trying to get the connection count : 3
2012-03-02 15:23:55,878 WARN [XELLERATE.DATABASE] Trying to get the connection count : 4
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: tcDataBase/readPartialStatement encounter some problems: Got a null connection
java.sql.SQLException: Got a null connection
at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy744.updateResponses(Unknown Source)
at Thor.API.Operations.AttestationOperationsClient.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1128.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy785.updateResponses(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskSubmitAttestationRequets.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-03-02 15:23:55,885 ERROR [XELLERATE.SERVER] Class/Method: tcDataObj/eventPreInsert encounter some problems: Data Access Error
com.thortech.xl.dataaccess.tcDataSetException: Data Access Error
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
Please help as its really urgent!Hey guys! 2 days and no replies yet. please help me with this.
-
Bill of exchange configuration
Hello experts!
I m having a problem. It has to do with bills of exchange. I have done all the configuration is need in testing enviroment and everything works ok. So i passed my requests to the productive enviroment, recreate all the relevant GL Accounts and when i go to ftr03 and want to present a check in the bank i get the error: ICC_TR 119
I go to the system messages and i read this:
Formatting error in the field RF05A-WVERW; see next message
Message no. 00298
Diagnosis
During batch input or when executing CALL TRANSACTION... USING a screen field was filled with an invalid input format.
System Response
Processing was terminated.
Procedure
The screen field has the technical name RF05A-WVERW . The cause of the error is described in the following message.
Correct the appropriate BDC data.
Fill in all required entry fields
I dont understand. What could possible went wrong? I followes step by step the configuration i had done in the test enviroment.
Did i miss sth?
Regards,
Katia
Message no. 00055
Diagnosis
You have attempted to update data or start an action. However, not all required information was specified.
System Response
The system could not execute the action.
Procedure
Enter all required information. Fields in which you must enter data are prefilled with a checkmark or question mark ("?") by the system. If the current screen contains tabs, check all tabs to make sure you have filled in all required fields. Then restart the action.hi
Bill of exchange configs
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
nagesh -
Exchange configuration in SCCM 2012
Hi All,
I was configuring Exchange server connectors on SCCM 2012 SP1 & our organization is using office 365 as exchange so, how do we configure this.
There are options for on premise exchange server & hosted exchange server where should i put this.
Thanks,
Pranay.Thanks Jorgen, the post was great.
Configured the settings as per the link but got this error in Easdisc.log
ERROR: Failed to initialize managed com instance. Error = Unknown error 0x80131501, -2146233087~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.516-330><thread=3472 (0xD90)>
INFO: End to process for discovery https://outlook.com/PowerShell-LiveID. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.516-330><thread=3472 (0xD90)>
INFO: CRC for SCF not changed. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.771-330><thread=7388 (0x1CDC)>
INFO: Raise Exchange Connector connection failure alert. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.817-330><thread=7388 (0x1CDC)>
INFO: CRC for SCF not changed. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:22.082-330><thread=7388 (0x1CDC)>
INFO: Waiting 3600 seconds for SCF update notification... $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:22.082-330><thread=7388 (0x1CDC)>
INFO: Start to process wipe/policy https://outlook.com/PowerShell-LiveID. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:24.767-330><thread=6924 (0x1B0C)>
INFO: [MANAGED] Initialize: ExchangeServer https://outlook.com/PowerShell-LiveID, Account (Admin Account Email id), VerboseLog 0~~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:27.780-330><thread=6924 (0x1B0C)>
ERROR: [MANAGED] Failed to open Runspace. Exception: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : The WinRM client received an HTTP status code of 301 from the remote
WS-Management service. For more information, see the about_Remote_Troubleshooting Help topic.~~ at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()~~ at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult
asyncResult)~~ at System.Management.Automation.Runspaces.RunspacePool.Open()~~ at System.Management.Automation.RemoteRunspace.Open()~~ at Microsoft.ConfigurationManager.ExchangeConnector.ExchangeRunspace.InitRunspace()~~
$$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.656-330><thread=6924 (0x1B0C)>
ERROR: Failed to call Initialize of managed COM. error = Unknown error 0x80131501~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.657-330><thread=6924 (0x1B0C)>
INFO: Raise Exchange Connector connection failure alert. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.765-330><thread=6924 (0x1B0C)>
ERROR: Failed to initialize managed com instance. Error = Unknown error 0x80131501, -2146233087~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.765-330><thread=6924 (0x1B0C)>
INFO: End to process wipe/policy https://outlook.com/PowerShell-LiveID. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.765-330><thread=6924 (0x1B0C)>
Thanks,
Pranay. -
Foriegn exchange configuration in ECC 6
Hi Experts,
As per my knowledge i have done the following settings.
1.Define Accounting Principles - GAAP
2.Assign Accounting Principle to Ledger Groups- GAAP- L5 ( Ledger)
3. Creation valuation methods -OB59
4. Define Valuation areas.
5. maintain the Exchange rates - OB08
6. Maintain the account determination at G/L account level - OB09
7. Post the Vendor invoice.
9. Define Currencies of Leading ledger - OB22.
10. Check Assignment of Accounting Principle to Ledger Group: GAAP- L5 ( Ledger)
11. Assign Valuation Areas and Accounting Principles 10 (Valuation area)- GAAP ( Accounting Principles)
12. I have run the Foreign exchange at FAGL_FC_VAL.
Please let me is there are anything i have missed out.
Thank you
Regards
vamsiHi All
Thanks for your inputs.
I have followed as per your inputs, but i am getting same problem.
Parameters in FAGL_FC_VAL. t.code
Company Code
Valuation Key Date
Valuation Area
Creating postings
Batch input session name
Document date
Posting date
Posting period
Selected Valuated vendor open items and i have enter vendor name.
Thanks for your help
Regards -
Error when trying to configure Lync to be a partner application for Exchange Server 2013
When I attempt to run the Configure-EnterprisePartnerApplication.ps1 script I get the following error:
The address 'LyncEnterprise-ApplicationAccount@*.domain.com' is invalid:
"LyncEnterprise-ApplicationAccount@*.domain.com" isn't a valid SMTP address. The domain name can't contain spaces and it has to have a prefix and a suffix, such as example.com.
The error continues with some more things, but what I can't understand is why it is adding a *. after the @ when it is trying to create the account.
Any help would be appreciated, thanks!Hi ADrake04,
I found that the script was configured as below:
$acceptedDomains = Get-AcceptedDomain;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains[0].Name;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
WriteInformation ("Created User <$($user.Identity)> for Partner Application.");
return $user;
Please note the variable “$acceptedDomain”,
this is a very important point.
(Note: The acceptdomain is used in Exchange, and can be created in Exchange EAC )
Now what you need to do is to run the following command in Exchange Powershell and see the result.
$acceptedDomains
= Get-AcceptedDomain
$acceptedDomains[0].Name
If you see the result “*.Domain.com”, then you should check your Exchange Configuration.
Best regards,
Eric -
Bill of exchange payble configuration
Hi
Could anybody provide configuration steps for bill of exchange payable.
regards
yeasap.fico
Moderator: Please, read and respect SDN rulesHI yesap.fico
Please find the below steps for Bills of Exchange Configuration in SAP ECC 6 Version
1. Define alternative Reconciliation accounts in OBYN t code
2. Define accounts for bills of Exchange Transaction in OBYH
3. Define Bills of Exchange Tax Code in Spro--> FI-Bank accounting --> Business transaction --> Bills of exchange -->Post Bills of Exchange receviables -->define bills of Exchange T codes
4.Preapare Bills of Exchange charges statment in FI-Bank accounting --> Business transaction --> Bills of exchange -->Post Bills of Exchange receviables --> Preapare Bills of Exchange charges statment
5.Configuration Design of u201CDefine Correspondence Types in t code OB77
6.Assign Programs for Correspondence Types T code OB78
7.u201CDefine Form Names for Correspondence Print In SAP Customizing Implementation Guide --> Financial Accounting (New) --> bank Accounting --> Business Transactions --> Bill of exchange transactions --> Post bill of exchange receivable --> Make and Check Settings for Correspondence --> Define Form Names for Correspondence Print
8.Define Sender Details for Correspondence Form in SAP Customizing Implementation Guide --> Financial Accounting (New) --> bank Accounting --> Business Transactions --> Bill of exchange transactions --> Post bill of exchange receivable --> Make and Check Settings for Correspondence --> Define Sender Details for Correspondence Form
9. Configuration Design of u201CDefine Bank Subaccounts in OBYK
10.Configuration Design of u201CDefine Bill of exchange types in F.39
11.Configuration Design of u201CMaintain House Bank Details in F.92
12.Configuration Design of u201CDefine DME User IDs in OBBD
13.Configuration Design of u201CDefine User-Specific Settings in SAP Customizing Implementation Guide --> Financial Accounting (New) --> bank Accounting --> Business Transactions --> Bill of exchange transactions --> Present Bill of Exchange Receivable at Bank --> Define User-Specific Settings
14. Configuration Design of u201CDefine Sender Details for Form for Bill of Exchange Presentation in SAP Customizing Implementation Guide --> Financial Accounting (New) --> bank Accounting --> Business Transactions --> Bill of exchange transactions --> Present Bill of Exchange Receivable at Bank --> Define Sender Details for Form for Bill of Exchange Presentation
15.Configuration Design of u201CDefine Bill of Exchange Payment Periodu201D in SAP Customizing Implementation Guide --> Financial Accounting (New) --> bank Accounting --> Business Transactions --> Bill of exchange transactions --> Present Bill of Exchange Receivable at Bank --> Define Bill of Exchange Payment Period
16.Configuration Design of u201CSet Up Paying Company Codes for Payment Transacti in FBZP
17. u201CSet Up Paying Company Codes for Payment Transactions in FBZP
18.Set Up Payment Methods per Country for Payment Transactionsu201D in FBZP
19.Set Up Bank Determination for Payment Transactionsu201D in FBZP
Hope it will Help You
Thanks & Regards
CA.Prasad -
Cisco Meeting Place Express 2.0 Exchange Server Configuration error.
Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system.
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
I have a problem with Cisco Meeting Place Express and Exchange Server synchronizing.
The Cisco Meeting Place Settings are
Exchange Server
Hostname *
Language* de_DE en_AU en_GB en_US fr_CA fr_FR
SSL enabled * true false
Cisco Unified MeetingPlace Express Mailbox Account
Windows domain *
Username *
Password *
Password confirm *
E-mail address *
Mailbox maintenance interval (days) *
Mailbox maintenance cutover (days) *
When I type the button test, I receive “Authentication error. Check the authenticated access to the Exchange Server for Microsoft NTLM authentication scheme.”
My Exchange Server is synchronized with MS Active Directory. As far as I know, Kerberous is used for authentication. So, how can I enable NTLM authentication scheme on AD? Are there any other options for Cisco MPE and Exchange synchronization?
Thanks for help
Sincerely yours
Sergey Bondarenkost1\:*{behavior:url(#ieooui) }
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Thanks a lot.
I have corrected domain name in configuration after your advice. Cisco MPE Exchange Configuration is working very well now. I’m able to start a meeting from the outlook calendar and send messages to meeting participants.
Thank you very march for your assistance!
Sincerely yours
Sergey Bondarenko -
Hi,
I was trying to configure Exchange Server 2010 for sending email to outside of the domain. For example I want to
send email from Exchange to Gmail. More over I also like to know how to enable Client Access
POP and IMAP in exchange server 2010. I already registered a
domain in Godaddy. How to configure Godaddy domain for enabling Exchange internet email configuration.
My atmosphere
Windows Server 2012
Exchange Server 2010 SP3
Domain host Godaddy
Any help highly appreciated. ThanksThe questions you have covers the full Exchange configuration!
To send an email outside, you need to create a send connector in Exchange 2010
http://technet.microsoft.com/en-gb/library/aa997285(v=exchg.141).aspx
You need to sort out your certificate and Exchange urls before enabling IMAP and POP. Both pop and imap services are disabled by default. You can go to services snapin and start the services by setting them from disabled to automatic. -
Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj -
Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table -
Exchange 2013 /m:recoverserver constantly failing due to MSExchangeSubmission.exe
Hi all,
I am trying to recover my lab Exchange 2013 server after removing a component of IIS messed all IIS functions, including all virtual directories.
The server is running on Hyper-V so I have removed and rebuilt the OS disk whilst the Exchange data resides on a separate disk. I've reset the computer account in AD and then run the command:
setup /m:recoverserver /targetdir:"d:\Program Files\Microsoft Exchange\v15" /DoNotStartTransport /IAcceptExchangeServerLicenseTerms
I have now done this a number of times and on each occasion it fails when attempting to start the Microsoft Exchange Transport Submission service. The error in the event log is as follows:
Log Name: Application
Source: Application Error
Date: 30/03/2013 20:18:53
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: HV-E2K13
Description:
Faulting application name: MSExchangeSubmission.exe, version: 15.0.516.29, time stamp: 0x506956b8
Faulting module name: Microsoft.Exchange.Net.ni.dll, version: 15.0.516.27, time stamp: 0x5064072e
Exception code: 0xc00000fd
Fault offset: 0x0000000000639d07
Faulting process id: 0x1cc8
Faulting application start time: 0x01ce2d83cbb5568e
Faulting application path: D:\Program Files\Microsoft Exchange\v15\Bin\MSExchangeSubmission.exe
Faulting module path: C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.E91f4adf5#\6f9b1d97c1f0dcb9b1006260c405a5da\Microsoft.Exchange.Net.ni.dll
Report Id: 0a1e3a42-9977-11e2-93f1-00155d0a4b05
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-03-30T20:18:53.000000000Z" />
<EventRecordID>112812</EventRecordID>
<Channel>Application</Channel>
<Computer>HV-E2K13</Computer>
<Security />
</System>
<EventData>
<Data>MSExchangeSubmission.exe</Data>
<Data>15.0.516.29</Data>
<Data>506956b8</Data>
<Data>Microsoft.Exchange.Net.ni.dll</Data>
<Data>15.0.516.27</Data>
<Data>5064072e</Data>
<Data>c00000fd</Data>
<Data>0000000000639d07</Data>
<Data>1cc8</Data>
<Data>01ce2d83cbb5568e</Data>
<Data>D:\Program Files\Microsoft Exchange\v15\Bin\MSExchangeSubmission.exe</Data>
<Data>C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.E91f4adf5#\6f9b1d97c1f0dcb9b1006260c405a5da\Microsoft.Exchange.Net.ni.dll</Data>
<Data>0a1e3a42-9977-11e2-93f1-00155d0a4b05</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Any thoughts?
PaulHi,
Im dealing with the same errors when i'm trying to restore our productive mailbox from a disaster.
I've tried everything listed here but last Milind Naphade commentary.
I'm in that right now, i ll tell if it's working soon.
Ty!
Hi Again. It Failed to start MSExchangeSubmission.exe
Here is the event on eventvwr (Some details on spanish wich is the language of my server)
Nombre de la aplicación con errores: MSExchangeSubmission.exe, versión: 15.0.516.29, marca de tiempo: 0x506956b8
Nombre del módulo con errores: Microsoft.Exchange.Net.ni.dll, versión: 15.0.516.27, marca de tiempo: 0x5064072e
Código de excepción: 0xc00000fd
Desplazamiento de errores: 0x000000000062f697
Identificador del proceso con errores: 0x7d0
Hora de inicio de la aplicación con errores: 0x01cfac0a0bb16a68
Ruta de acceso de la aplicación con errores: C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeSubmission.exe
Ruta de acceso del módulo con errores: C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.E91f4adf5#\b028905d8fd3faa99c9801b69b1500da\Microsoft.Exchange.Net.ni.dll
Identificador del informe: 4a9638fc-17fd-11e4-9404-000c29f101d8
Nombre completo del paquete con errores:
Identificador de aplicación relativa del paquete con errores:
ExchangeSetup.log ends with:
[07/30/2014 15:19:10.0220] [1] The following 1 error(s) occurred during task execution:
[07/30/2014 15:19:10.0220] [1] 0. ErrorRecord: El servicio 'MSExchangeSubmission' no puede alcanzar el estado 'Running' en este servidor.
[07/30/2014 15:19:10.0220] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceDidNotReachStatusException: El servicio 'MSExchangeSubmission' no puede alcanzar el estado 'Running' en este servidor.
en Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
en Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
en Microsoft.Exchange.Management.Tasks.ManageSetupService.WaitForServiceStatus(ServiceController serviceController, ServiceControllerStatus status, Unlimited`1 maximumWaitTime, Boolean ignoreFailures, Boolean sendWatsonReportForHungService)
en Microsoft.Exchange.Management.Tasks.ManageSetupService.StartService(ServiceController serviceController, Boolean ignoreServiceStartTimeout, Boolean failIfServiceNotInstalled, Unlimited`1 maximumWaitTime, String[] serviceParameters)
en Microsoft.Exchange.Management.Tasks.ManageSetupService.StartService(String serviceName, Boolean ignoreServiceStartTimeout, Boolean failIfServiceNotInstalled, Unlimited`1 maximumWaitTime, String[] serviceParameters)
en Microsoft.Exchange.Management.Tasks.StartSetupService.InternalProcessRecord()
en Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[07/30/2014 15:19:10.0236] [1] [ERROR] The following error was generated when "$error.Clear();
start-SetupService -ServiceName MSExchangeSubmission
" was run: "El servicio 'MSExchangeSubmission' no puede alcanzar el estado 'Running' en este servidor.".
[07/30/2014 15:19:10.0236] [1] [ERROR] Service 'MSExchangeSubmission' failed to reach status 'Running' on this server.
[07/30/2014 15:19:10.0236] [1] [ERROR-REFERENCE] Id=MailboxServiceControlLast___23a36fed7b6947e0906f388b5a90135c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[07/30/2014 15:19:10.0251] [1] Setup is stopping now because of one or more critical errors.
[07/30/2014 15:19:10.0251] [1] Finished executing component tasks.
[07/30/2014 15:19:10.0267] [1] Ending processing DisasterRecovery-MailboxRole
[07/30/2014 15:19:10.0282] [0] No se completó la operación de instalación de Exchange Server. Puede encontrar más detalles en ExchangeSetup.log ubicado en la <SystemDrive>: carpeta \ExchangeSetupLogs.
[07/30/2014 15:19:10.0282] [0] End of Setup
[07/30/2014 15:19:10.0282] [0] **********************************************
Any suggestion please??? idk what else can i do!
Maybe you are looking for
-
Print a PDF from a Crystal Report or CR Viewer?
Is this possible? Any hints on how to go about it? I'm not talking about exporting to PDF. I want the PDF to be a section of the Crystal Report. Thank you in advance. JN
-
IPhoto Albums and MobileMe Albums - Synchronization (Sync)
I am very interested in how the iPhoto and MobileMe operate together. I like that if I publish an album to MobileMe, those photos are then kept in sync with that MobileMe album and vice versa. If a change is made to the photo in iPhoto, the same chan
-
Stock transfer between two plants in same company code at price
Hello, Hello, I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity. How can I map this scenario in SAP? What will be the cost of my part in these two plants? What mechanism I would u
-
Data target 'ZGPPCAOD' removed from list of loadable targets; not loadable
Hi Friends, I deleted some info providers and now I'm receiving messages when I try to start an info package´that had deleted info providers as data targets. RSM033: Data target 'ZGPPCAOD' removed from list of loadable targets; not loadable RSM036: D
-
Removing apps from 'sync apps' list
how do you remove an app that you have already deleted from your iphone from the list of apps to sync in itunes (when your phone is connected to your computer) and it is unchecked to sync. it's presence generates requests to update so deleting it wou