Exchange Connector 3.0 not processing Office 365 mailbox

Hi,
I have Service Manager 2012 SP1 configured with Exchange Connector 3.0. The mailbox to be monitored is in Office 365. everything was running fine last week until I removed the federation trust and connectors from our On-premise Exchange servers as part of
the On-premise Exchange server decommissioning process to remove the Exchange Hybrid configuration.
Now the Exchange Connector does not monitor the mailbox of the configured user in the "run as account", no new incidents are displayed when users sent an email to the run as account. No errors are logged in the Event Viewer for the Exchange Connector.
Any suggestions?

Hi,
Set up the detailed logging and then see in the Operations Manager's log what happens when the Exchange Connector is running.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

Similar Messages

PST Capture Tool does not populate my Office 365 mailboxes

Hi all,
-I have installed PST capture on a win 7 64 bit machine with 64 bit office 2010 sp1.
-I can successfully sign in to the online connection.
-I have made sure that the account I am using to sign in is assigned organization management role.
-dot net 3.5 sp1 is is installed. and outlook is configured with the office 365 admin's account open in the background.
The Problem is that I am still not able to see the Office 365 mailboxes when I try and select "set mailbox" On reading various other posts on the internet lot of them mention to leave it for a while and the mailboxes will populate. Its now around 3 to 4
hours but I cannot see any mailboxes.
Kind Regards
Rana Banerjee
Rana

Hi Rana,
Just for your reference, The user account you specify on the Online Connection Settings tab of the PST Capture settings must be assigned the Organization Management role.
Refer to:
http://technet.microsoft.com/en-us/library/hh781036.aspx
http://technet.microsoft.com/en-us/library/hh781035.aspx
http://technet.microsoft.com/en-us/library/hh781032.aspx
Hope it is helpful.
If the issue continues, please feel free to post the question in Office 365 forum since it is Exchange server forum. Your understanding would be appreciated.
Fiona Liao
TechNet Community Support

Outlook 2013 not saving Office 365 Credentials in Roaming Profiles

Hi,
We have migrated one of our Exchange Mailboxes to our Office 365 Environment, we have had all the relevant DNS entries put in place, so when the user logs on and opens Outlook 2013, the Wizard picks up there Office 365 Mailbox and configures, it
asks you for User Credentials, and you type them in and select remember and then Outlook open fine with all the emails presented,
THE PROBLEM: After this user logs off and logs back on to either the same computer or another computer, and they open Outlook, you are yet again asked for your Credentials again, it remembers the username and not the password, once you enter the
password and click remember password it opens Outlook fine
Looking in Credential Manager, I can see that after selecting Remember Credentials, it is putting an entry in Generic Credentials, however when you log off and on again these disappear, I have added Manual Entries in Credential Manager and these
are saving!
I have noticed that in %USER%\AppData\Local\Microsoft\Credentials when you open Outlook and select remember password, it is adding a system file in here, so I decided to try copy the file to %USER%\AppData\Roaming\Microsoft\Credentials, when I log
off this is writing back to the server, and when I log back on it is downloading, HOWEVER when I open Outlook, it still asks for the password! And when I type it in and select remember, it adds the system file back in %USER%\AppData\Local\Microsoft\Credentials,
and ignores the Roaming one,
So currently I am using a Logoff and Logon Script to copy these Files too and from the relative folders and this works, however it is not ideal
The Script:
LOGOFF
'Test
xcopy %LOCALAPPDATA%\Microsoft\Credentials %APPDATA%\Microsoft\Credentials\ /H /Y
rmdir I:\MSCRM /S /Q
xcopy %LOCALAPPDATA%\Microsoft\MSCRM I:\MSCRM /H /Y /I /E
LOGON
xcopy %APPDATA%\Microsoft\Credentials %LOCALAPPDATA%\Microsoft\Credentials\ /H /Y
xcopy I:\MSCRM %LOCALAPPDATA%\Microsoft\MSCRM /H /Y /I /E
MY QUESTION:
So I guess my question is how can you get Outlook to look at the %USER%\AppData\Roaming\Microsoft\Credentials instead of the Local one?
Regards
Andy

Hi Andy,
According to your description, I understand that Outlook always ask for password even through you have selected remember password after migrate mailbox to Office 365.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm some points, please help to collect answers for following questions:
1. Is there still any Exchange server On-premise?
2. All user or any special account experience this issue?
By default for On-Premise environment, the Outlook client finds AutoDiscover also by using SCP first, if it can’t success. It will turn to use DNS.
Please try to remove SCP by ADSI Edit then try again, I find an thread about remove SCP and a similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/en-US/3559c142-2c42-4749-9476-422ab7449853/autodiscover-url-migration?forum=exchangesvrdeploylegacy
https://social.technet.microsoft.com/Forums/en-US/566616d9-d4c0-4d66-bf23-70541faf2c88/disabling-ad-autodiscover-while-migrating-to-office-365?forum=exchangesvradminlegacy
Besides, this issue may be related to Office 365. Please contact Office 365 Team so that you can get more professional suggestions, please refer to:
http://community.office365.com/en-us/default.aspx
Best Regards,
Allen Wang

I get a message I can not download office 365

I have new Windows 8 computer with only 4 programs. the message says I am not connected to Internet but I am. I have turned off firewall antivirus software still the same problem

Hi,
It will be great that if you can provide the complete error message, or attach a screenshot here, so that it will be easy for us to understand you.
Are you referring to the error message ‘We're sorry, we had a problem installing your Office program. Is your internet connection working? Do you have enough free space in your main drive?’?
If so, please refer to the article below and check if that helps:
http://support.microsoft.com/kb/2696484
Also, make sure your network is not blocking Office 365 URLs/IPs which mentioned in this article:
http://technet.microsoft.com/en-us/library/hh373144.aspx
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Winmail.dat attachments from Exchange 2013 on premi and Hosted Office 365 set up.

Hello TechNet,
I have an on going situation with winmail.dat attachments. I currently have a ticket open with Microsoft, but I want to see if anyone has personal experience with this. Here is the rundown.
We have migrated from an Exchange 2007 server to Exchange 2013 for the migration to Office 365. We also have a hosted Office 365 server with half of our mailboxes in the cloud and half of them on the Exchange 2013 on premise server.
The current settings for TNEFEnabled:
On Premise: False
Hosted: False
Whenever a internal email with a calendar invite(exchange calendar, go to meeting) goes out to any external domain the recipients receive winmail.dat.
When settings for TNEFEnabled On Premise and Hosted are set to true both calendar invites and PDF, Excel attachments etc the recipients receive winmail.dat.
When speaking with Microsoft about this issue. The representative was watching me through a LogMeIn session as I set both TNEFEnabled false on both on Premise and Hosted.
This is really frustrating as many employees depend on this to be fully functional, and to be honest am tired of dealing with this.
I need help.
-Ben

I am having the same issue.
Luckily I have only migrated my own mailbox to office365.
Tried both true and false TNEFEnabled on both onpremise and office365 via powershell and confirmed that both have been applied.
If I send the email as a plain text then the attachment works ok. If I send it as HTML then I get winmail.dat.
The above KB doesnt really help me, sending plain text emails is like going back to the dark ages!
I am sending from outlook to outlook (I send from my external email address, to my work email address and visa-versa)
If someone with an onpremise mailbox sends me an email, the attachment works ok.
If someone sends me an attachment via hotmail, the attachment works ok.
It seems to only effect emails I send to myself through outlook, i am sending it through a POP3 account to our onpremise exchange 2010 which forwards the email to office365

MerpAD Office365 in trash and I have not used Office 365.

At startup I get an empty file in my trash called MerpAD Office365 and I have not used Office 365. Does anyone know how to permanently stop this, please as it is annoying? It appears to have materialised following the latest update for Office for mac 2011.

According to the latest answer by Xferno on 9/27/2013 there is a way to stop this:
I found that if you disable Office error reporting the recovered files folder will stop to appear in the trash at each start. Here's the procedure:
1. Open application Office error reporting, the application is located in this folder
/Library/Application Support/Microsoft/MERP2.0
2. Go in preferences
3. Uncheck enable office error reporting

Outlook 2010 - SSO to Office 365 Mailbox

Dear,
Is it possible to do sso from an outlook 2010 client to an office 365 mailbox ? Now my customer is always prompted for a password. I'm just wondering if full sso is possible. Should be the easiest solution ;-). ADFS is configured
and working for webmail or lync, but not for the outlook client.
As a Citrix admin, I was asked to roam the outlook credentials. The customer uses Citrix profile mgmt and the profile is deleted from the server after logoff. Appdata (roaming) is redirected. What do we need to roam the credentials ? It's
not working out of the box. Looks like credentials are not stored in the roaming part of the profile.
I understood from http://social.technet.microsoft.com/Forums/office/en-US/2fc84b45-61a4-4ef8-9906-25632a4a74d3/outlook-2010-doesnt-save-password-exchange?forum=exchangesvrclientslegacy that the credentials are stored in C:\Users\<username>\AppData\Local\Microsoft\Credentials,
but strange enough, I only see a file in appdata\roaming\microsoft\credentials...
Best regards / thanks in advance,
Wim

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

"Office 365 Mailbox" missing for users that are member of Ricipent Management role

Hi,
I have a hybrid setup with Office 365 and one exchange 2013 standard server on-premises.
I currently have an issue with that I have a button after pressing the + under recipient to create a Office 365 mailbox from the ECP, but users that are members of the Recipient Management role don't have that button visible.
What extra permissions are required to be able to create an Office 365 mailbox from the on-premises Exchange?

Hi SeidKrv,
Thanks for your update.
Following article introuduces the permissions that need to assigned before running "New-Mailbox" command.
Please focus on "Recipient Provisioning Permissions" session.
Recipients Permissions
http://technet.microsoft.com/en-us/library/dd638132(v=exchg.150).aspx
Based on the article, it seems both Recipient Management role and Organization Management role are required.
More detailed information on both management role as below:
1. Administrators who are members of the Recipient Management role group have administrative access to
create or modify Exchange 2013 recipients within the Exchange 2013 organization.
2. Administrators that are members of the Organization Management role group have administrative access to the entire Exchange 2013 organization and
can perform almost any task against any Exchange 2013 object, with some exceptions. By default, members of this role group can't perform mailbox searches and management of unscoped top-level management
roles.
Thanks
Mavis Huang
TechNet Community Support

Email Forwarding on an on-prem mailbox to Office 365 mailbox

Hi All,
I need to put forwarding in place on a user's mailbox which is now on our on-prem Exchange 2013 server (we have hybrid deployment). I need to deliver to mailbox and forward to another user's mailbox of which is in Office 365. (The user has left and we move
mailboxes back to our on-prem Exchange when users leave).
I used to be able to do this when we had Exchange 2010 on prem via EMC, but don't seem to be able to do this via EAC on Exchange 2013. If I go to mailbox features on the mailbox I want to put the forwarding on, and then mail flow, and then browse to select
the receipient - it doesn't show me recipients in Office 365.
Any help on how to correctly put forwarding on an on-prem mailbox to a mailbox in Office 365, would be much appreciated.
Thanks,
Chris

Hi
Just use the management shell as described here Configure
email forwarding for a mailbox
Set-Mailbox -Identity "OnPrem mailbox" -ForwardingSMTPAddress "Office 365 mailbox"
That works for forwardings from onprem to Office 365
Hope that helps.
Regards
Pano
Pano Boschung, PageUp AG

Error Extending 2012 R2 AD Schema for Exchange 2013 RTM/CU6/CU7 (for Office 365 attributes)

Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.

I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table

Adding note to Office 365 contact

Hi there!
I'm using the Office 365 REST API to interact with contacts. I know that Exchange is behind Office 365, so maybe you can help me with this question...
First, I get the contact ID by querying:
https://outlook.office365.com/ews/odata/Me/Contacts
Then I need to add a note to a contact with a specific ID. I'm using the following code:
public void UpdateContact(string id, string note)
JObject updateRequest = new JObject();
updateRequest["Body"] = note;
byte[] byteArray = Encoding.UTF8.GetBytes(JsonConvert.SerializeObject(updateRequest));
HttpWebRequest webRequest = WebRequest.Create(String.Format("https://outlook.office365.com/ews/odata/Me/Contacts('{0}')", id)) as HttpWebRequest;
webRequest.Method = "PATCH";
// Add the Authorization header with the basic login credentials.
string authHeader = "Basic " + Convert.ToBase64String(Encoding.UTF8.GetBytes(user + ":" + password));
webRequest.Headers.Add("Authorization", authHeader);
webRequest.Accept = "application/json";
webRequest.ContentType = "application/json";
webRequest.ContentLength = byteArray.LongLength;
using (Stream dataStream = webRequest.GetRequestStream())
dataStream.Write(byteArray, 0, byteArray.Length);
// Send the request.
webRequest.GetResponse();
But I'm getting a 400 Bad Request response.
I found that notes are the body of the Contact, but how can I set that value? What am I doing wrong here?
Any hint will be greatly appreciated!
Thanks!

Hi Ernesto,
Not very much sure if you are targetting the correct attribute.
However the NOTES attribute is called "info" in AD.
Below is an example:
SET-ADUSER john.smith –replace @{info=”John Smith is a Temporary Contractor”}
As for Exchange Online, you might be missing 'S' in notes :
Notes
System.String
The Notes parameter specifies additional information about the user.
Set-User -Identity Contoso\Jill -DisplayName "Jill Frank" -Notes "Jill Frank is a Permanent Employee"
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Delegated Access will not remove - Office 365 email

Hi Guys,
We run our email purely on Office 365 and attach it to Outlook 2010 for our users. I have had no problems in the past delegating full access and then removing it. However I have a single user that when I remove their access, it seems to take (no error messages)
but then when I go back into the mailbox they still have full access.
I have checked the users Outlook's and they have not delegated access between them from there, tried it both with and without caching and neither user is on any sort of litigation hold (the few things I have seen asked to try on forums).
This user will not remove from any mailboxes they have access to.
Similar to the problem described here: http://community.office365.com/en-us/f/148/t/175474.aspx
Any help would be much appreciated.
Thanks
Gav

Hi,
The issue may occur when the delegate cache gets corrupted. Please try the steps below to check the result:
Go to File -> Account Settings -> Account Settings -> Double click on the account name -> Uncheck "Use Cached Exchange Mode" -> Next -> Finish -> Exit Outlook.
Then please start Outlook in Safe Mode:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
Go to File -> Account Settings -> Delegate Access -> Add anyone as delegate -> Close Outlook.
Then re-open Outlook in Safe Mode again, go to Delegate Access to remove all the delegates.
If the steps above doesn't help, we may need to remove the permission at the mailbox level. Since you are using Office 365, I suggest you post the question in Office 365 Community:
http://community.office365.com/en-us/f/default.aspx
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Migrate exchange data from on-premise to Office 365

Hi,
I have a customer with Exchange 2007 server with around 300 mailboxes. The customer has decided to go to O365 with hosted email and they have setup DirSync to synchronise the AD users and password. However they would now like me to migrate the exchange mailbox
data from the on premise server to the cloud can anyone please offer any advise with doing this?

Hi,
Base on my research, I recommend you refer to the following article to migrate the mailboxes:
Exchange 2007 cutover migration to the NEW Office 365
A cutover migration is the simplest way to get all your existing email into Office 365. As the name implies, it’s a cutover from one service to another. Cutover migrations are supported for Exchange 2003, 2007 and 2010; for organizations with fewer than
1000 mailboxes. The setup and process is straightforward and nothing complicated. With any successful migration, some planning and testing of existing infrastructure is invaluable. Make sure that you plan and test the migration prior to trying to implement.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2007 with pop3 downloader to office 365 migration

Hi,
i would like to migrate my exchange server (exchange 2007) to office 365,
presently i am downloading mails from a online mail service to exchange 2007 through a pop3 downloader and i am distributing this mails locally ( around 20 mail box)
how do i migrate my exchange mails to office 365, is there any automated way to do the same
requesting your valuable suggestions
Regards
Ratheesh
Ratheesh

Hi,
The partially complete in the migration report means there are some items have been skipped due to some reasons. If you check the skipped items, you will see the value is not 0 like other users with status as complete. Usually, this value is not high(1 or
2 in most circumstances) which means only limited items have been skipped.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Decommission Exchange Server 2003 after migration to Office 365

Hello,
We recently made the switch from our Exchange 2003 server to Office 365 with a Directory Sync Server.
Right now both the server is acting as a domain controller and the legacy exchange server. What I would like to do is keep the server as a domain controller and decommission the exchange services.
What do I need to do in order to properly decommission the exchange services without any loss of data/functionality with the directory sync server?
I previously posted this thread http://community.office365.com/en-us/forums/148/p/231357/719776.aspx#719776 but was redirected here.

Directory sync is done through your domain controller, not your Exchange server. True, your server serves both roles, but the Exchange services are not required for DirSync. What I would do, though, if I were you, would be to create a temporary
domain controller in your organization and point your DirSync to it. If that doesn't work, you know there is something on your current system that is required for the DirSync and there is possibly some reliance on Exchange. I'd then remove Exchange
from your server (I'd be sorely tempted to rebuild the server, using the same name and IP as before, just to be sure I started with a clean slate) and re-home the DirSync to it.
Good luck ... HTH.

Exchange Connector 3.0 not processing Office 365 mailbox

Similar Messages

Maybe you are looking for