Exchange Connector not get Active Directory Object_GUID

Hi all.
I've upgraded the Exchange Connector to version 11.1.1.5.0 and I have a issue.
The connector is unable to get Active Directory Obejct_GUID and populate the ReturnValue field in UD_MSEXCHG and the provisioning user in Microsoft Exchange is not completed.
Anyone can help me ?
Thks,
Joel

Similar Messages

Can not open Active Directory Users and Computers

Problem Reported:
Out of the blue this has started happening:
When I go to "Active Directory Users and Computers" I get this message.
"MMC cannot open the file C:\WINDOWS\system32\dsa.msc.
This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.
Additional information:
This is a server that has been in use for 2+ years with active directory users that can and do login everyday.
As far as I know the system has no backup.
dsa.msc IS located in the system32 folder
I am using the administrator account.
OS:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Please help with detail. Thank you.

Have you tried to uninstall ADUC administrative tool and re-install it again? If no, please give a try.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Issue with Exchange 2003 after upgrading Active Directory

I upgraded AD from 2003 to 2008 R2. Before I could go into AD to create users, click on the email check box and the user would have an account on Exchange. Now this feature is not available. How do I create mailboxes on my Exchange 2003 Server for users
now?

You can't, You have to administer Exchange 2003 functionality from Active Directory Users and Computers on the Exchange 2003 server.
FYI: Companies running Exchange 2003 after April 8, 2014 will be responsible for their own for support. More importantly, because Microsoft will no longer provide security updates, companies that choose to continue running Exchange 2003 accept the risk associated
with that.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Version 1 is not getting activated in PR and PO

We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
Full points will be awarded.

Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Dear Amir,
in pr version management , control data :select version active,version 0 ok, & external ok. &
field selection : reason required,short text req., requester req., external number & posting date are optional & save.
even with release strategy there is no problem
create a pr & save it.After release it. change the pr
after u canfind the versions 0 & 1.
in po version management , doc.category f doc.type nb pur.org xxxx ,control data :select version active,version 0 ok, field selection : reason required,short text req., requester req., external number & posting date are optional & save.
go to Set Up Change Displays as per standard nb is already there no need to change & category is blank
in category u have to maintain f(is for po) & save it.
create a po & save it.After release it. change the po
after u canfind the versions 0 & 1.
Regard's
Raj.

Function Module Not Getting Activated

Hi,
We are using a customised function module which we are calling in a user exit. We would like to call this function module in update task in the user exit to populate data in a custom table.
We have given the following parameters to the function module
Import Parameters
ITAB LIKE ZPRUNDAT
Export Parameters
l_subrc TYPE sy-subrc
On the attributes tab of the function module, Update Module has been selected under processing type.
When we try to activate this function module we get the following message
EXPORTING parameters are not allowed in the update task.
and the function module does not get activated. What should we change to get the function module activated?
Mick

Hi,
Please try this....
In function module
In tables Section add this...
RETURN TYPE BAPIRET2 and then activate.
if its useful reward points

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

Transformation is not getting Active.

HI
In DEV system , the transformation from Data source to Info source is in Active.when i press on change button .The transformation is in INACTIVE...Then i want to make it in active .....its not getting ACTIVE...showing not executable ...AND displaying an error ...
Rule 12 (target field: 0CRM_OBJ_ID group: 01 Standard Group): Source and target field length
Message no. RSTRAN563
Diagnosis
The length of the target field is shorter than the length of the source field. This can lead to information loss.
System Response
During the update, the values are shortened to the target field length.
when i check the start routine.....
Field: CLMREGNO Clm Reg No.
CLMREGNO TYPE C LENGTH 12,
when i check this field ( clmregno ) it is being used in different system.The size of the data is 11...
For the target field (0CRM_OBJ_ID) the length size is 10 .....How can i make it in Active ???.
whereas in Qlty and Prod System the same process is Active.Data is getting Loaded.
Thanks in advise.
Best regards,
kaleem.

hi all,
The actual data clmregno is in format
40100771646
30100014767
30100015004
30100014653
40100772077
40100788014
But , i am not getting the correct code/logic ...to set.
Appreciate if someone who is familiar in this help out.
Thank you.
Regards,
kalim.

OBUSOBJECT Blocked for conversion and not getting activated

I have changed the infoobject OBUSOBJECT attribute 0Mainusage fron <b>navigational to display</b> and then tried activating the OBUSOBJECT , , OBUSOBJECT If in the former active version this IO had 0MAINUSAGE as a nav attribute, now, in a revised version, this is just display attribute. surprise that the OBUSOBJECT couldnt be activated by installation.
Please tell me what are the steps now to resolve this. i want to actiovate the OBUSOBJECT in either old active version or activate with new revisions. i am just stuck since it is not getting activated.
please tell if i go to se16 and <b>sdokmia</b> table in first row i put BW* and then in
3 rd row i put what attribute since when i put 0Mainusage (/BI0/OIMAINUSAGE)
it does not show any record what should i put there?? and then what is the next step. if you can help me step by step.
please help me to resolve this
Regards
Soniya Kapoor

Hi Soniya,
If i have understood you properly, you have one attribute of the infoobject navigations, which u changed to display and tried activating and its not getting activated. This particular attribute is used in some othe cube as navigational attribute as well. Without deleting those references, u want to change the infoobject.
If thats the case, you will not be able to activate ur infoobject. All the reference have to be revoved before activating the object. Sorry for that
Regards
Sriram

Cd_links: could not get current directory

I am installing Oracle8 in Linux and that's the error that I am
getting: cd_links: could not get current directory
Does anyone know where is cd_links?
null

Claudia (guest) wrote:
: I am installing Oracle8 in Linux and that's the error that I am
: getting: cd_links: could not get current directory
: Does anyone know where is cd_links?
Which Oracle version are you installing? It's the Enterprise
Edition or the Standard Edition, did you download it from the
web? or you got the cd?
null

I have upgraded to IOS 7 and now I wish I did not as I have lost face time and iMessage and they would not get activated no mater what I have tried .it seems they are trying to get connected but are unable to do so.

I have upgraded to IOS 7 and now I wish I did not as I have lost face time and iMessage and they would not get activated no mater what I have tried .it seems they are trying to get connected but are unable to do so.
It is becoming frustrating to try to get it activated .
I do not know how to get it activated when it keeps informing me that there is no net work connected
Could not sign in please check your network connection and try again.
For both iMessage and FaceTime .
Any radical solution that you have will be appreciated as it is becoming frustrating .

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Sim not getting active

Sim not getting active it's been 8 days now. Keep on getting told today tomorrow 24 hrs, still no luck. Now I've been told my account needs a profile. I've contacted trading standards they told me to give it another 24 hrs. What do I do

You can try going to Settings>Mobile Networks>Network Operators, and then choosing "Select automatically" (or something to that effect) or if that doesn't work, try "Search networks" and selecting EE. This will force the phone to try and register on the EE network, it has resolved the same issue a few times in the past.

Charged for 1.41$ ( Trial fee 2 times and did not get activated )

I have tried to to buy Azure but I have noticed there is a free trial. So I decided to go for that because why not? 2 days ago I have tried to sign up and I got charged for 1.40$ but nothing was activated... So I was like ok that is just a dollar who cares.
Then today I have tried to sign up again and got charged for 1.41$ but azure threw an error saying that this was declined etc etc.
Today payment:
MSFT *ONLINE~~80092483~18 372
-1.41
Accepted*
08-06-2014
2 days ago:
MSFT *ONLINE~~80092483~18 372
-1.40
Accepted*
06-06-2014
Still not getting activated. Hoping to hear back from you and have a trial of azure. Thanks!

hi,
It is a account issue. I suggest you could try this channel:
Having issues with sign in or signing up for an account?
Please try it.
Hope this helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lion Server not reading Active Directory Groups reliably

I am trying to upgrade one of our XServes from Snow Leopard Server to Lion Server and am running into a strange issue with our Active Directory based users and Groups.
The current Snow Leopard Server serving files from a XSan volume is running fine, though we find a very long Lag time for Windows users to connect. Once a few users have connected the lag seems to go away, but it is still not nearly as fast as Mac users connecting or Windows connecting to a PC server.
So I have connected a second Xserve to the SAN and performed a clean install of Lion Server. Initially while it would find my Active Directory Groups it would not import any of the users, so obvioulsly no one could connect. In a last ditch effort I installed the beta of 10.7.4, which seemed to resolve the issue for a small group of test users. However as I expanded the test I found that some users would get a message that the were no resources available to them, or they didn't have the correct permissions. This is very strange as everyone is in the same group so should have the same permissions. As a test I took one of the user accounts and created a new share and gave him R/W permission to that share and suddenly all of the shares that he should have had permission to in the first place popped up.
The only thing that I can think of is that we have such a large Active Directory structure that the authentication is timing out or reaching some user limit and stops looking. (we have over 50,000 users and thousands of groups spread through multiple OUs in the AD structure)
The new Server.app in Lion looks nice, but it does not seem to have nearly the robustness of the previous Server Admin tools. For instance, I never needed or wanted to setup a "Golden Triangle" but with Lion it is required. Perviously I could search for AD users or groups and drag them from the search window to the share to assign permission, now even though I've imported the groups and users it needs to search the entire directory when assigning permissions - why can't it see the groups that are already there? Why can I run a dscl search and find a user or group instantly, but the Server.app hangs for 5 minutes and shows 0 results?
Has anyone found a way to make Lion Server work in an enterprise environment?

Yesterday morning I bound a 10.7.4 server to our AD, and in the afternoon I eventually saw all the AD users, groups, etc show in Workgroup Manager. Now, with dscl, I can see all the AD user and group records, and with Workgroup Manager, I can search the groups, users, and computers, but with the Server.app, when trying to create new group of the type "Imported group from another directory", the searches returned nothing. Directory Utility can show all the AD information also. Our AD has thousands of user record, and so it is reasonable that it may take some time for the Mac server to get all the info. But from the add users or groups interface, I just could not get any search results. What could be wrong then?

Getting Active Directory Users in UCM User Admin - Users Tab

Hello All
We have integrated WLS with our Active Directory. And we are getting all the active directory users under Security Realms >myrealm >Users and Groups tab in WLS Console.
We are also able to login to webcenter spaces and Content server using those userid and credentials. But our problem is in UCM under Admin Applets - User Admin - Users tab all the active directory users are not listed. So we are not able to assign particular roles to the users.
When a particular Active Directory user logins in UCM (First Time) after that the admisistrator (weblogic) is able to get that user under Admin Applets - User Admin - Users tab. And also it comes as an External user so we are not able to assign role.
So basically UCM requires a login to get all the users listed in users tab.
Our requirement is we want all the Active Directory users to get listed in UCM without the condition that the users has to login in content server once.
Thanks

Hi Navin ,
First and foremost the requirement that you have posted is not possible and the reason for that is :
Users are created on AD which is outside the realm of UCM hence there is no way that the users created on AD will be shown up under Users tab without they login atleast once . UCM does not know which all users are part of the realm until and unless the AD users login in atleast once .
Secondly external users cannot be assigned roles from UCM because when the Auth type is set to External UCM sees it as external entity hence not giving it any way to relate roles / groups from UCM . As a workaround you can change the AuthType for the External users to Global from User Admin applet after the users login for the first time . This will enable you to assign roles / groups for the AD users .
Hope this helps .
Thanks
Srinath

X-Serve not finding active directory

My X-Serve has begun to behave somewhat peculiarly.
I recently had SNow Leopard installed, and it had been working fine. I was deploying using deploy studio, it was all working fine. Then one day suddenly it just seems not to be able to find the active directory.
The AD is the PC network, I also can't connect to the internet. (And I've checked the proxies)
Also Server Admin has started throwing up errors saying it can't find the X-Serve... I'm a little confused as to why it can't find itself. Also the workstations now can't find the deploy studio server.
I can see the X-Serve remotely and operate it.
Any clues?
I've rebooted, I've fixed preferences, I'd update, but I can't get on the internet.

Just speaking to the loss of AD, If you are running Deep Freeze you may need to run a command that sets passinterval to 0.
http://www.mikespike.org/2008/08/12/osx-leopard-deep-freeze-and-active-directory -oh-my

Exchange Connector not get Active Directory Object_GUID

Similar Messages

Maybe you are looking for