Exchange console is Madatory for FIM SSPR email notification

Hi,
We are trying to trigger a mail once user reset his successfully. would like to confirm, is it Mandatory to install the exchange console on FIM server only for email notification in case of successful password reset and OTP on email.
If exchange console is mandatory to be installed on FIM server, How does FIM interacts with exchange console to trigger a email?
Thanks
Harry

Hello Harry,
Note that it is not required to install the Exchange management console on FIM in order to send notification emails. You should be able to send emails from within your workflow activity by purely editing it and adding a "notification" activity. (Assuming
your FIM instance is configured correctly).
The only reason for ever installing the Exchange Console on a FIM server was related to Exchange 2007 provisioning within older versions of FIM.
HTH
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

Similar Messages

SSPR Email Notification

I had the SSPR working fine, now i wanted to add a notification for the user after the password was reset. i have followed this
http://social.technet.microsoft.com/forums/forefront/en-US/1ac1f8e4-d8d5-4672-aa58-d6db869e88dc/sspr-email-notification
Now i have added a notification step under the Password Reset Action Workflow. Now i am getting the error below
Requestor: urn:uuid:b0b36673-d43b-4cfa-a7a2-aff14fd90522
Correlation Identifier: f542ab53-73b0-4cf1-9d74-f270812caa57
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> Unable to retrieve a workflow instance with the specified identifier 'f67bc2b4-dadb-499a-9cac-387402e147fc'.
--- End of inner exception stack trace ---
Can anyone help ?
Hany George | Consultant | IDC S.p.A | MCITP: Lync Server | MCITP: Exchange 2010 | MCTS: OCS | Blog: http://dusk1911.wordpress.com/ | If this post has been useful please click the green arrow to the left or click Propose as answer

If you modified the out the box workflow to include the notification then see the below link:
http://blog.predica.pl/fim-2010-authorization-workflow-fails-with-eventid-3/#comment-5411
It seems that updating that SSPR workflow can cause it to break because of a framework change inside of the XML. I had a similar problem like you described and taking the actions from the article above resolved it.
Thanks,
Scott

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Need to fixed solution for multipale path for single request email notification

Hello All,
I observed the some time GRC request have multiple path (Example 2.1 and 6.1). but in my landscape if one of the path completed email will sent to user and requester. but that should not correct.
Once request completed (Path1 , Path2 ..etc) than email notification will tigger.
If any one can help me about this settings.
Please let me know if you need more details..
My enviroment details\
Verson - GRC 5.3

I have not used 5.3 for a long time, but is there an option to set the provisioning at the end of the Request rather than a path and then send an email at the end of the whole request? I know this is all doable on 10.0 by setting the provisioning settings in the configuration and setting up the Global notifications in the workflow config.

Error in URL link for approvers in email notifications - GRC 10

Hi All,
After scheduling the PC - CCM jobs , all the approvers got the email notfication with the link to work inbox.
when approvers clicked work inbox , they are getting error message.
Kindly help on getting the steps to check for areas we need make sure , why link is not working and how to solve.
And what is the reason for this error?
Service cannot be reached
What has happened?
URL call was terminated because the corresponding service is not available.
Note
The termination occurred in system with error code 404 and for the reason Not found.
What can I do?
Please select a valid URL.
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards
Prasanna S

Hello,
Activate the relevant services in t code SICF
check the below Note for technical process
2145019 - Error - Service Cannot be reached
1697673 - GRC 10.0 - Service cannot be reached
Also check the below thread for similar issue
SICF service - error code 404
Regards
Baithi

Email notification for MeetingPlace not being received

Client has MeetingPlace 7.1.1 installed. Outlook email notification for MeetingPlace stopped working.
Problem symptom: When users try to schedule a meeting from web server page, both scheduler and invitee do not receive email notifcaiton in their email account. But email notification for MeetingPlace works when users schedule meeting from MeetingPlace for Outlook Plug-in regardlessly.
I've run a test with client, meeting creation is successful. But as soon as user finishs creation meeting, email notification is "Queued for delivery" in Email Notification Report in MeetingPlace App Admin page. I checked all possible settings in MeetingPlace Administration page, nothing looks wrong - correct email address account and type in user profile; SMTP server is properly configured and passes tha test; SMTP server is up and runnin.
I'm stumped after deep research online, did not go anywhere. Can someone point out where could possible go wrong and how to fix this issue??
Fei

Email notification works differently depending on where the scheduling is done. When done from Outlook your Outlook client sends the request directly to Exchange. When scheduling from the web the invite is held in a mailbox on the Application Server and periodically the system tries to send the email to its mailbox on Exchange. Since the issues is with meetings scheduled via the web interface there is an issue with MP talking to Exchange. I assume the users scheduling from the web have Outlook selected in their profile. This is the first place to check. Next I would look at the Outlook settings in MP. Make sure the MP mailbox is still in Exchange and that the user name and password is correct for the Exchange mailbox. This is usually where the issue is. Also make sure that SSL has not become a requirement to talk with Exchange.
Let me know if you have any questions.
John

Workflow sending 20 email notifications every one hour for the same event

Hi Experts,
We had an issue on a clientu2019s prod system that the workflow triggered the same event 20 times in one hour. Later, a client has resolved the issue by removing the information from the workflow administration and reentering it back again. The workflow administration contains email settings, web settings, workflow roles, and active workflow maintenance. Although, the issue has been resolved but a client still needs to know how that happened. I would like to get some helpful opinions on how this happened because I am very new to the workflow. I would really appreciate your opinions.
Thank you
Don P.

Hi Sue,
Thank you for your response. I am not sure if the event has been triggered erroneously. The client told us that it didn't happen in the dev system when he tested it, but it only happen in the prod system. This project went live a little bit over a year ago without any issues, but it just happened the first on 6/22.
The event is about to notify the user to review a new incident report (EHS), and it's same event id for all 20 email notifications. We will a client to look into their system about how this event raised?, what does the event log reveal? and if he uses the event queue. Again, thanks for your response.
-Don P.

Email notification for Inbound ASN

Hi All,
We have a requirement once Supplier confirms the PO , Ware house team should get email notification with below mentioned details.
when an order will be shipped,
which items are being shipped,
how many of each item is being shipped
physical characteristics about the shipment such as the shipment’s weight,
the number of boxes and a description of how the shipment units are packaged.
which mode of transportation is being used for shipping and
carrier information.
Please help me with step by step configuration for ASN inbound email notification.
Regards,
Gowri

Hi Robyn,
We have implemented MM-SUS,
Once PO is created in ECC the same will be reflected in SUS portal, Supplier will confirm the PO with available stock Qty which generates inbound delivery in ECC.
Requirement is warehouse team should be notified when supplier confirms the PO i.e. when inbound delivery is created.
Please guide me,
@Jürgen L
I couldn't understand your concern.

Could not able to send email notification through approval workflow

Hi,
I am trying to send an email notification to the requester and approver on request creation and when the approver approves the request then an email should get triggered to the request with approve/reject outcome. All the SOA configuration has been done and also able to send test email through SOA console but could not able to send email through SOA composite.
For configuring an email notification, I am using notification tab in ApprovalTask, but still problem is not resolved.
Please help me in resolving the issue.
Thanks.

Use this link to check again whether you have configured the Email driver properties properly. http://www.iamidm.com/2012/09/oim-11g-r2-lab-6-managing-notifications.html
Also check whether any firewall issue is there which is preventing OIM to contact the email server in sending out emails. Check the logs if there are any issues.
Also check this system property 'RequestNotificationLevel'. This property indicates whether or not notification is sent to the requester and beneficiary when a request is created or the request status is changed. If the value is 0 for this system property, make it 1.
I was facing a similar type of issue due to two reasons:
1. System property
2. Firewall
Check both of them and try again.
Edited by: Durgaprasad on Apr 15, 2013 2:08 AM

ISE Guest Email Notification (Guest account creation)

When a guest user creates an account in ISE, it sends a system generated email with the username/password. It says "Welcome to the Guest Portal, your username ise xxx and password is yyy." Is there anywhere in ISE (1.2) to change this text, especially the name 'Guest Portal'? I thought it was in language templates > Configure Miscellaneous Items > Portal Name. But I changed this to the portal name, and it was not reflected in the email. Thanks.

Josh,
Right now, it's pretty limited. Here is the template to be used for formatting the email notifications:
E-Mail Notification Template
The following is an example of the login information for the body of an e-mail in an English language template:
Welcome to the Guest Portal, your username is $username$ and password is $password$
The $username$ and $password$ strings will be replaced with the username and password values from the Guest User account.
In the e-mail body, you can use special variables to provide the details for the created guest account. When using these variables, you must use all uppercase or all lowercase letters, and you cannot mix them. For example, the string for username can be either $USERNAME$ or $username%, but it cannot be $UserName$.
You can use these variables in the e-mail notification template:
•$USERNAME$ = The username created for the guest.
•$PASSWORD$ = The password created for the guest.
•$STARTTIME$ = The time from which the guest account will be valid.
•$ENDTIME$ = The time at which the guest account will expire.
•$FIRSTNAME$ = The first name of the guest.
•$LASTNAME$ = The last name of the guest.
•$EMAIL$ = The e-mail address of the guest.
•$TIMEZONE$ = The time zone of the user.
•$MOBILENUMBER$ = The mobile number of the guest.
•$OPTION1$ = Optional field for editing.
•$OPTION2$ = Optional field for editing.
•$OPTION3$ = Optional field for editing.
•$OPTION4$ = Optional field for editing.
•$OPTION5$ = Optional field for editing.
•$DURATION$ = Duration of time for which the account will be valid.
•$RESTRICTEDWINDOW$ = The time window during which the guest is not allowed to log in.
•$TIMEPROFILE$ = The name of the time profile assigned.
This dicument is found here:
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_custom_portals.html#wp1015657
ISE v1.3 should have some improvements and quite possibly some HTML tags.
Charles Moreton

Custom email notification

Hi All,
I have written a component which will search KM repository and find out list of documents under Timebasedpublishing enabled folder which is going to expire in another one week of time with the owner and expire date details.
Now I need to write a custom component to send a mail to owner of each document with the expiry date details.
Could anyone help me out with same code for sending the email notification for the above requirement.
Thanks in advance,
Siva

Hi Siva,
you can use JavaMail natively or use some of the mail services implemented within KM (using for example configured mail servers and so on).
Most of the possibilities are discussed several times on SDN, just three examples (with further links) to get some overview:
https://www.sdn.sap.com/irj/sdn/thread?threadID=263553
https://forums.sdn.sap.com/thread.jspa?threadID=98781
https://forums.sdn.sap.com/thread.jspa?messageID=264422
Hope it helps
Detlev

Approve in email notification

Hi,
Oracle Workflow has the standard functionality of approving the from a mail, where the user has to login to E-BS and then approve. I would like to develop a functionality where the user just click a button in the mail and the workflow gets approved. Can anyone please help how should I develop such a scenario.
Description:
Email should have a approve button and the user should just click the button and approval should be done. (No login)
Please help..
Regards,
Boris

Hi Boris,
You can approve a notification from email by just clicking on Approve/Reject link in email without login to application.
For this you need to do below steps.
1. The recipient user has the valid email address set, for which the email notification has to be received.
2. The recipient user notification preference should be 'MAILHTML' i.e 'HTML Mail with attachments', you can set it from preferences section after login with the user
3. You can see the notification preference and email address details from wf_local_roles table..
4. The notification Mailer should be up and running (Outbound thread count should >=1 and Inbound thread count = 1)

User Admin emails notifications

Does the User Admin fuctionality of E-Commerce for ERP include email notifications when a new user is created and/or password is changed? We want the new user's inital password sent to him/her when they are first created, and when their password is changed.
- Andrew Castillo

Hello Andrew,
The UME logon module provides e-mail notification to password reset and control the rules to expired password.
You can check more information on:
http://help.sap.com/saphelp_crm50/helpdata/en/e5/618a3eacd49076e10000000a114084/frameset.htm
Cheers,
Heber Olivar

Email Notifications goto Junk Mail

Does anyone have a solution for stopping C4T email notifications from going to junk email?
It happens randomly to people that were fine before.
I also don't understand why a successful approval goes to junk but a successful audit goes to inbox on the same report.
Any thoughts would be great.

Hi Britt,
unfortunately there is no general solution for your issue:
If you're relying on the junk filtering of Microsoft Outlook, maybe the information given by Microsoft can help you: Overview of the Junk Email Filter - Outlook . Users can do the necessary changes by themselves, but I guess a configuration can also be provided centrally by your IT department.
If you are using an anti spam tool for your company like Eleven's eXpurgate, then you have to contact that tool's provider to adjust the criteria for categorizing e-mails as spam.
Best Regards,
Andreas

If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
Thanks

Sorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/

Exchange console is Madatory for FIM SSPR email notification

Similar Messages

Maybe you are looking for