Exchange Correlation Service Cannot connect to RMS

This started appearing as an alert and I've been unable to get to the bottom of the problem. The Correlation service is running. I've checked the Microsoft.Exchange.Monitoring.CorrelationEngine.exe.config file and the server address was set to "localhost".
I tried changing it to the FQDN of my RMS Emulator, but it didn't resolve the problem.
Proxy is enabled on agents.
Any ideas appreciated as I'm at a loss.
Cannot connect to Operations Manager Root Management
Server.
Error: An error has been detected by Operations Manager Root
Management Server 'TUR-SCOMMGMT1.mydomain.com. Error message:
Microsoft.EnterpriseManagement.Common.InvalidDatabaseDataException: One of the
enumerations in the resulting object(s) contained data outside the allowable
range. ---> System.ArgumentException: Requested value 'None' was not
found.
at System.Enum.Parse(Type enumType, String value, Boolean
ignoreCase)
at
Microsoft.EnterpriseManagement.Configuration.MonitoringRule..ctor(RuleGenerated
generatedWrapper, ManagementGroup managementGroup, ManagementPack
managementPack)
--- End of inner exception stack trace ---
at
Microsoft.EnterpriseManagement.Configuration.MonitoringRule..ctor(RuleGenerated
generatedWrapper, ManagementGroup managementGroup, ManagementPack
managementPack)
at
Microsoft.EnterpriseManagement.Configuration.MonitoringRule.Constructor.CreateSingle(Result
row)
at
Microsoft.EnterpriseManagement.Configuration.ManagementPackElementConstructor.CreateMultiple[T,H](IList`1
dataAccessResult, ManagementGroup managementGroup, ManagementPack
managementPack)
at
Microsoft.EnterpriseManagement.ManagementGroup.GetMonitoringRulesInternal(MonitoringRuleCriteria
criteria, IList`1 targetTypeIds, BaseClassTraversalDepth
baseClassTraversalDepth)
at
Microsoft.EnterpriseManagement.ManagementGroup.GetMonitoringRules(MonitoringRuleCriteria
criteria)
at
Microsoft.EnterpriseManagement.ManagementGroup.GetMonitoringRule(Guid id)
at
Microsoft.Exchange.Monitoring.CorrelationEngine.MomSdkProxy..ctor(String
momServer, String domain, String user, SecureString password, String mpId,
String extensionMPId)

The fix for Change Tracking has already been published.
Thanks Darren for following up on this other thread for another similar issue related to another IP
https://social.msdn.microsoft.com/Forums/azure/en-US/ea0d8dc7-21d7-41f0-ba7f-a9f6879fbfe8/exchange-correlation-service-error?forum=opinsights

Similar Messages

Data service cannot connect to mover

Hello,
I have an installation of OSB that worked ok until last week.
From last week, the following message started appear, and I need your help to understand if this is a physical error or it is a OSB problem:
Error: data service cannot connect to mover - error connecting to another NDMP server (NDMP client)
Below a full example (it is a piece of osb job log):
2011/03/31.10:32:59 ______________________________________________________________________
2011/03/31.10:32:59
2011/03/31.10:32:59 Transcript for job oracle/3732.1 running on srvcmdstbyb
2011/03/31.10:32:59
Volume label:
Volume UUID: 869b6426-3de2-102e-969c-00137252621c
Volume ID: OSB-CATALOG-MF-009352
Volume sequence: 1
Volume set owner: root
Volume set created: Thu Mar 31 10:33:18 2011
Volume set closes: Thu Apr 07 10:33:18 2011 (no writes after this time)
Volume set expires: Thu Apr 21 10:33:18 2011
Media family: OSB-CATALOG-MF
Original UUID: 869b6426-3de2-102e-969c-00137252621c
Archive label:
File number: 1
File section: 1
Owner: root
Client host: srvcmd
Backup level: 0
S/w compression: no
Archive created: Thu Mar 31 10:33:18 2011
Backup piece name: arch_HCB1_3799_1_30_03_2011_747153724
Backup db name: hcb1
Backup db id: 660880637
Backup copy number: not applicable
Backup content: archivelog
Error: data service cannot connect to mover - error connecting to another NDMP server (NDMP client)
Backup statistics:
status 21
devices VS80
devices 1
volumes OSB-CATALOG-MF-009352
voltags (null)
file 1
host srvcmd
encryption off
start_time Thu Mar 31 2011 at 10:33:18 (1301578398)
end_time Thu Mar 31 2011 at 10:33:29 (1301578409)
backup_time Thu Mar 31 2011 at 10:33:18 (1301578398)
dev_kbytes 6
dev_iosecs 11
dev_iorate 605.1 B/S
wrt_iosecs 4
wrt_iorate 1.7 KB/S
physical_blks_written 0
write_errors 0
physical_blks_read 0
read_errors 0
error_rate 0%
2011/03/31.10:33:30 ______________________________________________________________________
Thank you in advance.
Best regards.
Ricardo Brambila.

Can you include an "obtool lsh -l" please? You may also want to check that you can do an "obtool pingh" to the client and media servers that are being used. Maybe a service isn't accessible.
Please confirm you are using OSB 10.3.0.3.0 from "obtar -V"
You should also not really be writing your RMAN jobs to the OSB Catalog Media Family. You should instead use its own or the RMAN-DEFAULT one.
Thanks
Rich

SCOM 2012 R2 Exchange Correlation Service , we receive almost at every day in the Event log Application the Event720

HI
Since the SCOM was Upgrade to R2
Almost at every Day, we receive in the Event log application the Event 720 from the correlation service Source MSExchangeMonitoring Correlation
This arrives always around 7:20AM, someday is at 7:19, other at 7:21. It is always approximately at the same hour, but we never have any problem during weekend
The description of the Event
Exceeded maximum time (15 minutes) to wait for completion of all CorrelateBatchTask threads.
After that the correlation stop to work. At the Same time if we tried to open the SCOM Console on that server we was unable to open it. Also we was not able to open the SCOM PowerShell
And also we cannot from that server to get which server is the RMS if we run get-SCOMRMSEmulator . (This the RMS Server)
When this arrive, the only thing we found, it to reboot the server or restart de SCOM service, after the Reboot the Correlation begin to work
We got also many Event 714 Critical and after this Event 711 Warning
Thank

Have a look at: https://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
One user reported an issue with the exchange correlation engine after upgrade and said that:
I had issues with the corellation engine after upgrading scom 2012 to R2.
The MomBidLdr.dll version changed in the SCOM directories, and needs to be updated in the:
C:\Program Files\Microsoft\Exchange Server\v14\Bin directory.
That seemed to stop the errors for me.
Some troubleshooting steps listed here also:
https://technet.microsoft.com/en-us/library/ff360495(v=exchg.140).aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

Hello, everyone, my name is rafl
I have a problem with exchange 2013 active sync.
I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
(legacy.domain.com)
the process of moving mailboxes successfully without error.
Access OWA for exchange 2007 and exchange 2013 is running normally
access mail from Outlook running normally
Certificate request has been installed and has no problem with it
The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
user mailboxes are still on exchange 2007 is not problematic.
only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
any ideas for this problem, and what should I check on the exchange server ..?

i have run the activesync test connectivity and get some error :
Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 3091 ms.
Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21072 ms.
Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21049 ms.
I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

EdgeSync service cannot connect to this subscription because of error "No EdgeSync credentials were found for Edge transport server

When checking Edge Synchronization on our Exchange 2010 HUB server (Test-EdgeSynchronization) I get SyncStatus "Failed". I suspect this failed after we had moved all of our Exchange 2010 servers (Except the Edge server which not member
of any domain or site) to a new site.     In hopes to resolve this, I did the following:
Removed the Edge Subscription from our HUB server using the EMC.
Deleted the cert used by ADAM on our Exchange 2010 Edge server (using the Certificates MMC).
On the Exchange 2010 Edge server created a new Edge subscription file using: “New-EdgeSubscription –FileName "C:\EdgeSubscription20150424.XML"
Restarted the "Microsoft Exchange ADAM" service on our Edge server.
Copied the "EdgeSubscription20150424.XML" to our HUB server. Then completed the New Edge subscription import on our HUB server using the MMC (specifying the AD site and location/name of the XML).
After this, I still get syncstatus failed on our HUB.   Thought to check the certificate using "Get-ExchangeCertificate | FL" but that results in: "Get-ExchangeCertificate : The Exchange Certificate operation has failed
with an exception. The error message is: Access is denied".   I tried to create a new certificate on our HUB serve using "New-ExchangeCertificate", but get the exact same "Access is denied" error message
again.
I believe we never noticed that the Edge sync wasn't working because we only use our Edge server when our hardware email filter fails (Symantec Message Gateway). Our Edge server has a lower priority in our MX record and lower priority in our send connectors
on our HUB servers. The Edge server though does receive email from internal email relay from some servers for notifications. These do get delivered unless the user mailbox is new (suspect ADAM isn't updating - that's why I started looking into
this).
This should be simple!   What am I missing???   Thanks in advance for any feedback.
PS - this is my first posting here.... I apologize if I posted this in the wrong forum or category. :)

Hi PongoDog,
Thank you for your question.
By your description, we could refer to the following steps to check if issue persist:
Remove all hub servers certificate
Create a new hub server certificate with command "New-ExchangeCertificate"
Remove the edge subscription on hub & edge server
Recreate sync subscription and import it on hub server.
If the issue persist, we could Check network connectivity between the Hub Transport server and Active Directory. Use Ping to isolate network hardware problems and incompatible configurations. Use PathPing to detect packet loss over multiple-hop trips. then
run dcdiag /s:<Domain Controller Name> at a command prompt on the Exchange Server. Use the output of Dcdiag to discover the root cause of any failures or warnings that it reports. Finally Rreview the Application log for MSExchangeADAccess and MSExchange
Topology events that could provide more information about the root cause of this event and post Event ID to
[email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Topology services cannot connect with multihomed LMS 3.2

Hi,
I'd like to ask for you help. I've installed LMS 3.2 on a server with 2 NICs and we're having a problem executing Topology Service from a remote host.
When I try to launch Topology-Services I get the following error:
Campus Manager Error: "Cannot connect to ANIServer: ANIServer6.0-<hostname>"
Probable cause: "Unknown hostname..."
Recommended Action: "Check wether the ANIServer6.0-<hoostname> process is up and running"
I can see in the java trace that the host communicates correctly with the primary NIC and I don't know for what reason, it uses the second NIC IP of the LMS server when it has to connnect to the OSAGENT service (port 42342 ).
basic: JNLP2ClassLoader.findClass: com.sun.corba.se.impl.presentation.rmi.bcel.StubFactoryFactoryBCELImpl: try again ..
basic: JNLP2ClassLoader.findClass: com.sun.corba.se.impl.presentation.rmi.bcel.StubFactoryFactoryBCELImpl: try again ..
basic: JNLP2ClassLoader.findClass: com.cisco.nm.ani.share.idl.AniClientModule.AniClientHelper: try again ..
basic: JNLP2ClassLoader.findClass: com.cisco.nm.ani.share.idl.AniClientModule.AniClient: try again ..
basic: JNLP2ClassLoader.findClass: com.cisco.nm.ani.share.idl.AniClientModule._AniClientStub: try again ..
network: Cache entry found [url: https://<IP_NIC_primary>:443/CSCOcm/classpath/NS_Ref, version: null] prevalidated=false/0
network: Connecting https://<IP_NIC_primary>:443/CSCOcm/classpath/NS_Ref with proxy=DIRECT
network: ResponseCode for https://<IP_NIC_primary>:443/CSCOcm/classpath/NS_Ref : 304
network: Encoding for https://<IP_NIC_primary>:443/CSCOcm/classpath/NS_Ref : null
network: Disconnect connection to https://<IP_NIC_primary>:443/CSCOcm/classpath/NS_Ref
network: Connecting socket://<IP_NIC_secondary>:42342 with proxy=SOCKS @ <proxy>:8080
For security reasons, the host is strictely not allowed to communicate with the secondary NIC (it is not routable).
- Is it possible to bind all the communications of the "remote client" to the primary NIC IP ?
- How can I force the java client to use the primary NIC when it concerns the OSAGENT service ?
- Is Topology Services supported with multi homed configuration ?
Thanks in advance for your answers.
Regards.

Kindly check if the hostname of the server is resolveable properly with the correct IP address on the client machine and port 42342 is not blocked between server and client in any way.
Its must that client must resolve the hostname of the LMS server with the correct IP Address. If DNS is not configured on the client machine, then you need to do manual entry in the host file of the client machine. I hope you are able to launch the topology from the LMS server.
Also check this :-
To run Topology on a multi-homed machine, there are two requirements.
•All IP addresses must be configured in DNS.
•Owing to restrictions with CORBA, only one IP address can be used by the client or browser to access the server. You must select one IP address as the external address, with which the client will login to the CiscoWorks server.
To select an IP address, modify the gatekeeper file located in NMSROOT\lib\vbroker\gatekeeper.cfg
where NMSROOT is the directory (opt/CSCOpx by default) in which CiscoWorks is installed.
Replace every instance of external-IP-address with the external IP address you choose, and remove the "#" character, from the following:
•#vbroker.gatekeeper.backcompat.callback.host=external-IP-address
•#vbroker.se.exterior.host=external-IP-address
•#vbroker.se.iiop_tp.host=external-IP-address
•#vbroker.se.interior.host=external-IP-address
After modifying the gatekeeper file, restart the Daemon Manager. To do this, first stop the Daemon Manager by entering:
net stop crmdmgtd
Now, start the Daemon Manager by entering:
net start crmdmgtd
Hope it helps
Thanks
Gaganjeet

Exchange 2013 - outlook cannot connect server

Hi,
I have installed exchange server 2013 to testing it in my home lab. DC - domain.local and exchange - sub.domain.com. Internet connection is with dynamic IP from ISP - router (PPPoE). My ISP provide DDNS and I got sub.domain.com for dynamic
IP. Also ISP is blocking port 25. I've asked ISP to unblock port 25 and i don't know if they unblock it. For exchange server i use smart host for relay.
Problem: If i use port forwarding (25) mail flow is normal intern - extern. This was tested with OWA, but outlook cannot connect to exchange server: logging on mail server failed.
If i don't use port forwarding (25) outlook connect to exchange server, but i cannot receive email from external.
Please give me a hand on this.
Thank you.

Hi Radu,
how do you connect Outlook with Exchange? Usually you're using MAPI/RPC/HTTPS so there is no dependency with SMTP. How did you configure your Outlook? How did you configure your CAS Settings?
Please verify your CAS is configured correctly and you are using Outlook AnyWhere, see
http://technet.microsoft.com/en-us/library/hh529912(v=exchg.150).aspx
Regards,
Martin

Exchange Server 2013 cannot connect to Shell getting error Message

New-PSSession : ******* Connecting to remote server ki-edm-vsrv-01 failed with the following error message :
[************,TimeStamp=2014-03-18 3:05:46 PM] Access is
denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108173,PSSessionOpenFailed

It will be nice if you provide more info:
What version of Exchange 2013 are we talking about - RTM, CU1, CU2, CU3 or SP1
Is this a CAS, MBX or multirole server
Did you remove the default Exchange self-signed certificate
Are you trying to connect locally or remotely
Step by Step Screencasts and Video Tutorials

Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support

After 10.6.2 update Entourage Web Services Edition cannot connect

After I updated 10.6.2 patch, Entourage 2008 Web Services Edition cannot connect to the Exchange server anymore.
I removed the office 2008 and re-installed with all the available patches. Standard version of Entourage is able to connect and synchronize however Web Services Edition is not able to connect. Web Services Edition is using Exchange Web Services as primary connection protocol to the Exchange Server.
Nothing has changed on the server side and Apple Mail can connect to the exchange server. It seems to be related with 10.6.2 update. Any idea what might cause the problem and how to fix it?

I managed to get the connection log from a working system and compared it to mine. During the Autodiscovery part the only difference I found was related with timezone. Below is the exact text from the log files:
*Successful connection:* <t:TimeZoneContext><t:TimeZoneDefinition Id="Georgian Standard Time"/></t:TimeZoneContext></
*failed connection:* <t:TimeZoneContext><t:TimeZoneDefinition Id="(null)"/></t:TimeZoneContext></
After figuring out this detail I checked the computer timezone again.
Both computer and Entourage was set to GMT+4 but the cities were different. Computer was set to “GMT+4 Dubai” and Entourage was “GMT+4 Abu Dhabi, Muscat”
Even though time zones were the same, Dubai is not defined as a timezone city in Entourage. I changed the computer timezone to “GMT+4 Muscat” and the connection established.
This is the most stupid error I ever seen...

IPhone 3G cannot connect to the Lotus Traveler service on LotusLive Notes

I have this answer from IBM regarding conection between my Iphone 3G and Lotus Live:
IPhone 3G and early iPod Touch devices cannot connect to the Lotus Traveler service on LotusLive Notes
This issue also applies to Lotus Traveler services where the authentication mechanism requires HTTP session cookies as part of its authentication scheme.
There is a known issue with Apple iPhone 3G and early iPod Touch models running iOS 4 that prevent it from using HTTP session cookies in the Exchange ActiveSync account. If you are using one of these devices that has been upgraded to iOS 4, and you are trying to connect to a Lotus Traveler service that requires HTTP session cookies, such as LotusLive Notes, then the device will fail to connect to the service. After manually configuring the account or installing a profile, when you open the Inbox or other folder in the mail application, you will see the generic error "Cannot Get Mail : The connection to the server failed.".
Further examination of network traces would show that the Apple device is making its request without the requested session cookie and instead there is a header in the data named X-Bad-iPhone-No-Cookie.
The IBM workaround is:
Contact Apple support for a profile that can be installed to enable HTTP session cookies for the Exchange ActiveSync account....
Does somebody had this issue and how it was solved?

Try the following steps:
Plug into iTunes, and click "check for updates." There may be a new network settings file to update (separate from the firmware updates).
Settings > General > Reset > Reset Network Settings
Restore as "new iPhone".
Replace the SIM (from AT&T)
Make appt. with Apple store "Genius Bar."
Message was edited by: modular747

External Clients cannot connect to Exchange Server

Hello all:
My external clients using outlook cannot connect to Exchange Server 2013. We have on-presmise version updated to Cu3 and after the Cu3 update we lost connectivity with Outlook clients. Many of the settings in IIS were changed after the Cu3 update,
I noticed after my http->https redirect was not applied anymore to the default website. Here is my Get-OutlookAnywhere results:
RunspaceId : 6379fab1-f692-484f-8118-99e48330d4c4
ServerName : EXCHSERV
SSLOffloading : True
ExternalHostname : mail.domain.com
InternalHostname : mail.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://EXCHSERV.domain.com/W3SVC/1/ROOT/Rpc
Path : D:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : EXCHSERV
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=EXCHSERV,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : EXCHSERV\Rpc (Default Web Site)
Guid : 596ed7a1-ceec-4a36-9cbc-617ac5214463
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 12/23/2013 2:20:41 AM
WhenCreated : 11/25/2013 2:51:36 PM
WhenChangedUTC : 12/23/2013 7:20:41 AM
WhenCreatedUTC : 11/25/2013 7:51:36 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain.com
IsValid : True
ObjectState : Changed
Thanks in advance

Hi,
According to your description, users cannot connect to Exchange server 2013 both internal and external.
Please run Test E-mail AutoConfiguration in Outlook to check your autodiscover service. Also
reset your Exchange virtual directory to connect correctly. If the issue still continues after all configurations are setting properly, collect some Event logs would be helpful.
If there is any question, please post the results here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010 Send Connector to postfix (v. 2.11) smarthost uses STARTTLS and cannot connect

Dear all,
I am having problems with exchange 2010 sending emails through a postfix smarthost server which disconnects the sessions. I also use a sendmail as a smarthost
server which is working just fine but I have to switch to postfix and cannot do this as long as the encryption does not work.
Here is the log file of the postfix server:
Jan 4 14:18:59 server7 postfix/smtpd[1659]: initializing the server-side TLS engine
Jan 4 14:18:59 server7 postfix/smtpd[1659]: connect from server1.mydomain.com[192.168.20.10]
Jan 4 14:18:59 server7 postfix/smtpd[1659]: setting up TLS connection from server1.mydomain.com[192.168.20.10]
Jan 4 14:18:59 server7 postfix/smtpd[1659]: server1.mydomain.com[192.168.20.10]: TLS cipher list "aNULL:-aNULL:ALL:+RC4:@STRENGTH"
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:before/accept initialization
Jan 4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => -1 (0xFFFFFFFFFFFFFFFF))
Jan 4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => 11 (0xB))
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0000 16 03 01 00 5a 01 00 00|56 03 01 ....Z... V..
Jan 4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1BE] (84 bytes => 84 (0x54))
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0000 54 a9 3d b9 0d 5e 8b 64|7c 6b b5 21 f2 93 e7 84 T.=..^.d |k.!....
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0010 17 ea 33 d7 e5 13 f2 75|3a 87 38 32 01 85 82 5b ..3....u :.82...[
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0020 00 00 18 00 2f 00 35 00|05 00 0a c0 13 c0 14 c0 ..../.5. ........
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0030 09 c0 0a 00 32 00 38 00|13 00 04 01 00 00 15 ff ....2.8. ........
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0040 01 00 01 00 00 0a 00 06|00 04 00 17 00 18 00 0b ........ ........
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0050 00 02 01 ...
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0053 - <SPACES/NULLS>
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 read client hello A
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server hello A
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write certificate A
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write key exchange A
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server done A
Jan 4 14:18:59 server7 postfix/smtpd[1659]: write to 7F4823FA5210 [7F4823FB8B70] (1911 bytes => 1911 (0x777))
Jan 4 14:18:59 server7 postfix/smtpd[1659]: 0774 - <SPACES/NULLS>
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 flush data
Jan 4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAC803] (5 bytes => 0 (0x0))
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:failed in SSLv3 read client certificate A
Jan 4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept error from server1.mydomain.com[192.168.20.10]: lost connection
Jan 4 14:18:59 server7 postfix/smtpd[1659]: lost connection after STARTTLS from server1.mydomain.com[192.168.20.10]
Jan 4 14:18:59 server7 postfix/smtpd[1659]: disconnect from server1.mydomain.com[192.168.20.10]
I
have read in the post at https://social.technet.microsoft.com/Forums/exchange/en-US/6db38364-cb08-45c0-b159-3ddf30ef0b3e/exchange-2010-send-connector-uses-ssltls-and-cannot-connect-to-smarthost-how-to-deactivate-ssl?forum=exchange2010
how to deactivate the SSL encryption, but this is of course a security flaw, if I am not mistaken. I would like to encrypt the connection between the servers for obvious security
reasons but I have come to a standstill...
My Exchange server certificate is configured
as follows:
AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
ule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKe
essRule}
CertificateDomains : {server1, server1.solid-con.com}
HasPrivateKey : True
IsSelfSigned : True
Issuer : CN=server1
NotAfter : 22/01/2017 13:18:02
NotBefore : 22/01/2012 13:18:02
PublicKeySize : 2048
RootCAType : None
SerialNumber : 6925D91285B649BD4D5E4297F1A48471
Services : IMAP, POP, IIS, SMTP
Status : Valid
Subject : CN=server1
Thumbprint : 939A37173BF84E352CEDC74F7D9A3D71F498A005
AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
ule, System.Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {WMSvc-SERVER1}
HasPrivateKey : True
IsSelfSigned : True
Issuer : CN=WMSvc-SERVER1
NotAfter : 19/01/2022 12:56:44
NotBefore : 22/01/2012 12:56:44
PublicKeySize : 2048
RootCAType : Registry
SerialNumber : 1DB8711F7ADC5CB54196468EF2FF5D21
Services : None
Status : Valid
Subject : CN=WMSvc-SERVER1
Thumbprint : 191D86BDE274510453D58DDB91D253DABBCF05F1
And My Default Send Connector is configured as follows:
AddressSpaces : {SMTP:*;1}
AuthenticationCredential : System.Management.Automation.PSCredential
Comment :
ConnectedDomains : {}
ConnectionInactivityTimeOut : 00:10:00
DNSRoutingEnabled : False
DomainSecureEnabled : False
Enabled : True
ErrorPolicies : Default
ForceHELO : False
Fqdn :
HomeMTA : Microsoft MTA
HomeMtaServerId : SERVER1
Identity : Internet
IgnoreSTARTTLS : False
IsScopedConnector : False
IsSmtpConnector : True
LinkedReceiveConnector :
MaxMessageSize : unlimited
Name : Internet
Port : 25
ProtocolLoggingLevel : None
RequireOorg : False
RequireTLS : False
SmartHostAuthMechanism : None
SmartHosts : {server7.mydomain.com, server6.mydomain.com}
SmartHostsString : server7.mydomain.com,server6.mydomain.com
SmtpMaxMessagesPerConnection : 20
SourceIPAddress : 0.0.0.0
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {SERVER1}
TlsAuthLevel :
TlsDomain :
UseExternalDNSServersEnabled : False
Any help would be greatly appreciated as I am
stuck...
Luca

Hi Allen,
Thank you very much for your reply.
The Postfix TLS Manager is enabled in master.cf
tlsmgr unix - - n 1000? 1 tlsmgr
and running
server7:/etc/postfix # ps -efa|grep tls
postfix 11967 11863 0 11:21 ? 00:00:00
tlsmgr -l -t unix -u
Every other (Linux/UNIX) server has no problem e.g.:
Jan 5 11:28:36 server7 postfix/smtpd[12215]: connect from server2.mydomain.com[192.168.20.20]
Jan 5 11:28:36 server7 postfix/smtpd[12215]: Anonymous TLS connection established from server2.mydomain.com[192.168.20.20]: TLSv1 with cipher DHE-DSS-AES256-SHA (256/256 bits)
Jan 5 11:28:36 server7 postfix/smtpd[12215]: B5502946AB0: client=server2.mydomain.com[192.168.20.20]
Jan 5 11:28:36 server7 postfix/cleanup[12221]: B5502946AB0: message-id=<[email protected]>
Jan 5 11:28:36 server7 postfix/qmgr[12200]: B5502946AB0: from=<[email protected]>, size=1026, nrcpt=1 (queue active)
Jan 5 11:28:36 server7 postfix/smtpd[12215]: disconnect from server2.mydomain.com[192.168.20.20]
Jan 5 11:28:37 server7 postfix/smtpd[12225]: connect from localhost[127.0.0.1]
Jan 5 11:28:37 server7 postfix/smtpd[12225]: 4076A946AB1: client=localhost[127.0.0.1]
Jan 5 11:28:37 server7 postfix/cleanup[12221]: 4076A946AB1: message-id=<[email protected]>
Jan 5 11:28:37 server7 postfix/qmgr[12200]: 4076A946AB1: from=<[email protected]>, size=1778, nrcpt=1 (queue active)
Jan 5 11:28:37 server7 postfix/smtpd[12225]: disconnect from localhost[127.0.0.1]
Jan 5 11:28:37 server7 postfix/smtp[12222]: B5502946AB0: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.54, delays=0.05/0.01/0.01/0.47, dsn=2.0.0, status=sent
(250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 4076A946AB1)
Jan 5 11:28:37 server7 postfix/qmgr[12200]: B5502946AB0: removed
Jan 5 11:28:37 server7 postfix/cleanup[12221]: 4401F946AB0: message-id=<[email protected]>
Jan 5 11:28:37 server7 postfix/qmgr[12200]: 4401F946AB0: from=<[email protected]>, size=1920, nrcpt=1 (queue active)
Jan 5 11:28:37 server7 postfix/local[12226]: 4076A946AB1: to=<[email protected]>, relay=local, delay=0.02, delays=0/0.01/0/0, dsn=2.0.0, status=sent (forwarded as 4401F946AB0)
Jan 5 11:28:37 server7 postfix/qmgr[12200]: 4076A946AB1: removed
Jan 5 11:28:37 server7 postfix/smtp[12227]: Untrusted TLS connection established to 192.168.20.10[192.168.20.10]:25: TLSv1 with cipher AES128-SHA (128/128 bits)
Jan 5 11:28:37 server7 postfix/smtp[12227]: 4401F946AB0: to=<[email protected]>, orig_to=<[email protected]>, relay=192.168.20.10[192.168.20.10]:25,
delay=0.29, delays=0/0.01/0.02/0.25, dsn=2.6.0, status=sent (250 2.6.0 <[email protected]> [InternalId=619] Queued
mail for delivery)
Jan 5 11:28:37 server7 postfix/qmgr[12200]: 4401F946AB0: removed
and if you take a look at the lines in bold you will see that mails can be delivered over TLS to that very Exchange server (the mailboxes are on that server)...
To summarise:
exchange --> postfix with TLS = session disconnected (and everything seems to be initiated by the exchange server -if I read the logs correctly)
postfix --> exchange with TLS = works
any further hints?
Thank you very much in advance,
Luca

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My ipad2 appears to be connected to the internet, but I cannot connect..I keep getting Safari cannot open the page because it is not connected to the internet....I restarted the router and the ipad still no connection...my service is working properly

My ipad 2 appears to be connected to the internet(all bars are up in the left hand corner).....yet I cannot connect to the internet(Safari cannot connect open the page because it is not connected to the internet)
I unplugged my router for 30 seconds and restarted my ipad...still nothing
I really don't think it is my service because my laptop works fine...as I am using the internet right now
I only had this ipad for 2 days
Are there any suggestions that can help solve this problem?

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Exchange Correlation Service Cannot connect to RMS

Similar Messages

Maybe you are looking for