Exchange Error code 8206

This is the error that I am getting any advice?
Add error on entry starting on line 1: Busy
The server side error is: 0x21a2 The FSMO role ownership could not be verified because its directory partition has not replicated successfully with atleast one replication partner.
The extended server error is:
000021A2: SvcErr: DSID-030A0AF2, problem 5001 (BUSY), data 0
An error has occurred in the program

Hi,
What is your exchange version? what were you doing when you get this error?
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

  • Exchange error code 501

    I have a problem with Exchange and extracting out
    attachments. from email. We use Exchange 2007 server and https
    connection. Https connection works well, but I can't get
    attachments. Program stops at tag --> cfexchangemail
    action="getAttachments" with following error message:
    Error performing the action.
    Exchange error Code : 501.
    Can somebody please help me?

    I'm not sure what hotfix you are referring to. BTW, my
    problem seems to have solved itself. It is possible that I may have
    been trying to pull attachments from the wrong message. Anyway, the
    code is working for me as advertised.
    -reed

  • Adobe Exchange Error Code: U44M1I208

    On July 11th, I was able to contact Technical Support and talk to someone via the phone about a problem with the Widget Browser and was told that it was no longer supported and that I should be using the Adobe Exchange.  However to use it, I need to install an update.  When I try to install the update, it fails and gives this error code: U44M1I208.  All I want to do is be able to use these products to enhance my webpage.  I am using a Windows 7 machine. 

    You might try what is talked about in this thread and the one that is linked to:
    https://forums.adobe.com/thread/1220110

  • Exchange 2007 EXCDO 8206 error in Exchange 2007 SP2 with Rollup 4

    Dear sir,
        We have a problem on Exchange 2007 Server. When user use OWA to access web mail calendar, server event log will show EXCDO error 8206:
    Calendaring agent failed with error code 0x8000ffff while saving appointment
    Type: Error
    Event ID: 8207
    Category: General.
         Moreover server becomes working in very slow web mail response during any user click web mail calendar.   Server performance return back after error message appeared  in event log.
    It doesn't has problem if using Outlook to access mailbox calendar.
    Any suggestion to fix it ?
    Joe

    Hi Joe,
    We are also finding the same issue with getting that EXCDO error. The problem stemmed when users noticed some previously accepted appointments disappeared (As I suspect you discovered with your users). 
    The workaround has been to get the user to accept the appointment again by going into deleted items, this seems to add the appointment as it should have the first time.
    We have done the following but it didn't fix the problem:
    Disabled extra SEP features on the clients - No Change
    Disabled non-essential Outlook add-ons - No Change 
    Removed BES Express and CDO MAPI From Exchange server - No Change
    Disabled MS Defender on Exchange - No Change
    Fixed any Public folder errors - No Change
    Disable Window services WSS and UNC sharing feature in Active Sync - No Change
    Also ensured Autoupdate and auto process was enabled for affected users - No Change
    I'm going to try the reg change mentioned in this thread but other than the built in MS Defender we don't have anti-virus on our mail server. 
    At first we thought it was Active Sync as it only seem to impact those with a A/S device, but now it's intermittent for other users using Outlook.  We are currently using Exchange 2007 SP3 with RU13. We are looking at trying an update
    to RU14 but I am doubtful it will fix the problem. Did you have any luck finding a solution?
    Thank you in Advance.

  • Calendaring agent failed with error code 0x8000ffff Event id 8206 and 8207

    Hi to all
    We have an Exchange 2007 SP3 with Update Rollup 11 and all the user use Outlook 2003 with SP3.
    Suddenly in our Exchange Server we have start to receive a lot of 8206 and 8207 EXCDO errors in the Application.
    Event Type: Error
    Event Source: EXCDO
    Event Category: General
    Event ID: 8206
    Date:  5/2/2015
    Time:  11:17:41 πμ
    User:  N/A
    Computer: EXCHANGESRV1
    Description:
    Calendaring agent failed with error code 0x8000ffff while saving appointment.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 48 72 53 61 76 69 6e 67   HrSaving
    0008: 41 70 70 74 3a 3a 48 72   Appt::Hr
    0010: 43 68 65 63 6b 50 61 74   CheckPat
    0018: 74 65 72 6e 20 66 61 69   tern fai
    0020: 6c 65 64 2e 20 4d 61 69   led. Mai
    0028: 6c 62 6f 78 3a 56 61 73   lbox:x
    0030: 73 69 6c 69 73 2e 4b 6f   xxxx.xxx
    0038: 6e 74 6f 67 69 61 6e 6e   xxxxxxx
    0040: 69 73 40 45 55 52 4f 43   xx@xxxx
    0048: 48 41 52 54 49 4b 49 2e   xxxxxxx.
    0050: 47 52                     GR     
    Event Type: Error
    Event Source: EXCDO
    Event Category: General
    Event ID: 8207
    Date:  5/2/2015
    Time:  11:19:41 πμ
    User:  N/A
    Computer: EXCHANGESRV1
    Description:
    Calendaring agent failed with error code 0x8000ffff while deleting appointment.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 48 72 44 65 6c 65 74 69   HrDeleti
    0008: 6e 67 41 70 70 74 3a 3a   ngAppt::
    0010: 5f 48 72 47 65 74 42 75   _HrGetBu
    0018: 73 79 49 6e 66 6f 20 66   syInfo f
    0020: 61 69 6c 65 64 2e 20 4d   ailed. M
    0028: 61 69 6c 62 6f 78 3a 56   ailbox:x
    0030: 61 73 73 69 6c 69 73 2e   xxxx.xxx
    0038: 4b 6f 6e 74 6f 67 69 61   xxxxxxxxx
    0040: 6e 6e 69 73 40 45 55 52   xxx@xxx
    0048: 4f 43 48 41 52 54 49 4b   xxxxxxxx
    0050: 49 2e 47 52               I.GR   
    All the errors come ONLY FROM 1 USER. 
    How can i fix this errors?
    If you require any further information do not
    hesitate to let me know
    Thanks and regards.

    You must ask in Exchange forum
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver

  • PI 7.11 sp6 system copy Exchange Profile error code: 399

    Experts,
    We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
    I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
    I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
    I did not run into any major problems doing the steps of the copy itself.
    I did the usual "post" steps, documented in the guide that really are done on any NW system.
    Then I got into the specific "PI" post steps and that's where I now have a problem.
    I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
    My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
    com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399 
    I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
    Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
    If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
    I see these errors in the default trace and application log:
    Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
    No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
    Name="PIT.SystemHome.<traininghostname>"
    Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
            at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
    #2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
    SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
    #2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
    #BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
    +There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
    SLDCHECK shows this:
    Function call returned exception code     3
    Access to the XI Profile is currently disrupted.
    I can't be the first person to run into this.
    SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine".  I don't want that.
    Any ideas?
    Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory".  It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server,  RWB.
    Thanks for reading this,
    NICK

    Here is the error I get when I try to change the "abap connection" to the correct hostname:
    RFC call returned an error code: 399
    Stack Trace class com.sap.rprof.dbprofiles.DBException:<br><pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre>

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • Exchange Server 2013 Missing file on ISO install Error Code 1603

    Hi all,   a mystery needs solving any suggestions much appreciated:
    We are trying to install Exchange Server 2013 on Windows 2012 server.
    The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
    All preparation and requisites in place.
    During Stage 2 Copying files, we receive an error code 1603 and installation halts.
    The error states:
    Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
     Verify that the file exists and that you can access it.'.
    We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
    We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
    We have tried both Mailbox/Client Access  and Mailbox only installations.
    The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
    Any ideas anyone, could we source a different ISO or copy of the file or ?????
    Many thanks in advance

    Had the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
    bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
    a CSS and not as a TXT.)
    I reran the install and it completed without issue.

  • Error code 600 and 500 on autodiscover in Exchange 2010

    Hi,
    I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
    <?xml version="1.0" encoding="utf-8"
    ?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    <Response>
    <Error Time="09:28:57.8739220" Id="2715916636">
    <ErrorCode>600</ErrorCode>
    <Message>Invalid Request</Message>
    <DebugData />
    </Error>
    </Response>
    </Autodiscover>
    Thanks,
    ShutMo

    Hi,
    The website https://host.abdomain.local/autodiscover/autodiscover.xml
    Shows the following error:
    <?xml version="1.0" encoding="utf-8" ?>
    <Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
    <Response>
    <Error Time="09:28:57.8739220" Id="2715916636">
    <Errorcode>600</Errorcode>
    <Message>Invalid Request</Message>
    <DebugData/>
    </Error>
    </Response>
    </Autodiscover>
    Test Email Autoconfiguration
     <
    I have do "Test Email Autoconfiguration" and have the following log:
    Guessmart POP: server pop3.aadomain.com, port = 110, initializing
    Guessmart POP: server aadomain.com, port = 995, initializing
    Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
    Guessmart POP: server aadomain.com, port = 110, initializing
    Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
    Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
    Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
    Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
    GetLastError=0; httpStatus=500
    Autodiscover request completed with http status code 500
    Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
    Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
    Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
    Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
    Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
    Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
    Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
    Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
    then I received another failed.
    Please advise.
    Thanks,
    Shutmo

  • Exchange 2003 Removal fails w/ Error code 0X80072030 (8240): There is no such object on the server- pls read

    Dear all,
    I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
    I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
    1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
    2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010  => successfully
    3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group  => successfully
    4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store  => successfully
    5. Delete Public and Private Information Stores from Exchange 2003 server  => successfully
    6. Delete Routing Group Connectors to Exchange Server 2003  => successfully
    7. Delete Recipient Update Service agreements using ADSIEdit according to
    http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
    8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
    I used the following articles while migrating to Exchange 2010:
    http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
    http://support.microsoft.com/kb/833396/en-us
    http://www.simple-talk.com/content/article.aspx?article=882
    and several more.
    I looked into these forums regarding my problem and came up with:
    http://support.microsoft.com/kb/283089/en-us
    http://support.microsoft.com/kb/822931
    I investigated the following possible reasons:
    - homeMDB attribute (no references to my Exchange 2003 anymore)
    - HomeMDBBL attribute (as described here
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
    - msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
    - the "famous" postmaster issue as described here:
    http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
    In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
    SET objRootDSE = GETOBJECT("LDAP://RootDSE")
    strExportFile = "C:\temp\MyExport.xls"
    strRoot = objRootDSE.GET("DefaultNamingContext")
    strfilter = "(&(objectCategory=Person)(objectClass=User))"
    strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
                                    "initials,displayName,physicalDeliveryOfficeName," & _
                                    "telephoneNumber,mail,wWWHomePage,profilePath," & _
                                    "scriptPath,homeDirectory,homeDrive,title,department," & _
                                    "company,manager,homePhone,pager,mobile," & _
                                    "facsimileTelephoneNumber,ipphone,info," & _
                                    "streetAddress,postOfficeBox,l,st,postalCode,c"
    strScope = "subtree"
    SET cn = CREATEOBJECT("ADODB.Connection")
    SET cmd = CREATEOBJECT("ADODB.Command")
    cn.Provider = "ADsDSOObject"
    cn.Open "Active Directory Provider"
    cmd.ActiveConnection = cn
    cmd.Properties("Page Size") = 1000
    cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
                                       strAttributes & ";" & strScope
    SET rs = cmd.EXECUTE
    SET objExcel = CREATEOBJECT("Excel.Application")
    SET objWB = objExcel.Workbooks.Add
    SET objSheet = objWB.Worksheets(1)
    FOR i = 0 To rs.Fields.Count - 1
                    objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
                    objSheet.Cells(1, i + 1).Font.Bold = TRUE
    NEXT
    objSheet.Range("A2").CopyFromRecordset(rs)
    objWB.SaveAs(strExportFile)
    rs.close
    cn.close
    SET objSheet = NOTHING
    SET objWB =  NOTHING
    objExcel.Quit()
    SET objExcel = NOTHING
    Wscript.echo "Script Finished..Please See " & strExportFile
    What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
    e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
    Could this cause any problems?
    Now the in depth look into my "Exchange Server Setup Progress.log":
    [09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
    [09:33:06]  ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
               Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
    [09:33:06]  CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
               Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
    [09:33:06]  CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
               Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
    [09:33:06]  CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
               Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
    [09:33:06]  CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
               Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
    [09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
               Der Vorgang wurde erfolgreich beendet.
    [09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
    0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
    [09:33:14]  CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
    I did search for:
    - Error code 0X80072030 (8240)
    - ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
    Nothing so far. In case some more information is needed just let me know.
    Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
    Alex

    I kept on searching and found something else:
    http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
    It says that the following groups need to be resided in the AD's default "Users" organizational unit:
    - Exchange Domain Servers
    - Exchange Enterprise Servers
    - Exchange Services Group
    Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
    Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
    2003 within the AD.
    Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
    Exchange server within their homeMTA attribute.
    Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
    Another issue?
    Regards
    Alex

  • Error Code 8224 Ldifde Exchange 2010 installation failure

    Hi, here is a problem I have been bashing my head with for about a week. I am transitioning to Exchange 2010 from 2003. I have two DC's running Windows Server 2003 Sp2, one of which is the Exchange 2003 server. I have just brought online a windows 2008R2
    member server, which I am attempting to install exchange 2010 on. I get the following error message during installation.
    Organization Preparation
    Failed
    Error:
    The following error was generated when "$error.Clear(); install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema1.ldf")" was run: "There was an error while running 'ldifde.exe' to
    import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'".
    There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'
    Elapsed Time: 00:00:22
    And from the ldif.err:
    The connection cannot be established
    The error code is 8224
    Now I have checked dns, all is good. I can resolve the DC without issue.
    I have done dcdiag and netdiag and passes all tests. I have even written a hosts file, all this to no avail.
    Any help would be appreciated.
    Thanks
    B

    I had a same and I fixed this........
    Solution
    1. The error is happening at the "Organization Preparation" stage, so let's go 'old school' and do that manually.
    2. Locate the server on your network that is the schema master (Locate FSMO Servers).
    3. Put the Exchange 2010 DVD in the schema master (Or share it over the network and connect to it from the schema master server).
    4. Drop to command line and change to the DVD Drive/Directory with the Exchange 2010 setup files in it.
    5. ONLY do this if you have Exchange 2003 already! Run the following command, (If no Exchange 2003 present, skip to the next step).
    X:\Setup /PrepareLegacyExchangePermissions (Where "X" is CD ROM derive letter)
    6. Run the following command:
    X:\Setup /PrepareSchema
    7.
    Run the following command:
    X:\Setup /PrepareAD
    Note: At this point it may fail, and say it requires an organization name, (it will do this if it finds no existing container in Active Directory).
    Error
    Exchange organization name is required for this mode.  To specify an organization name, use the /organizationName parameter.
    If that is the case, then run the following command:
    X:\Setup /PrepareAD /OrganizationName:"Your required org name"
    Reboot your server and try to install exchange 2010.
    Jotiba Patil

  • Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

    Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
    Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
    Thank you,
    tjr

    Try following the steps outlined in this blog post:
    http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

  • Trying to update Exchange Manager 6.0.8 on CS6 and getting Error Code: U44M1P7.

    Trying to update Exchange Manager 6.0.8 on CS6 and getting Error Code: U44M1P7.  Have tried installing manually but still no joy.

    Please delete the EM CS6 installation folder manually, then download and install the EM 6.0.8 from Adobe - Exchange : Download the Adobe Extension Manager

  • Downloaded adobe exchange in CS6, I was prompted to upgrade the Extension Manager from version 6.0.0.412 to 6.0.8 . I keep getting error code: U44M1P7 - any suggestions? tks

    can anyone help me with the error code U44M1P7? thanks

    Please delete the EM CS6 installation folder manually, then download and install the EM 6.0.8 from Adobe - Exchange : Download the Adobe Extension Manager

  • I am getting sync problems with Exchange Server and local outlook. Error code is 18439. Does anybody have an idea what the problem might be?

    I am using Outlook on my Imac, which is linked to the Windows Exchange Server. All off a sudden I keep receiving messages saying that the message Re: xxxx cannot be synchronized with the exchange server. When I delete the message from my local mail box, all is fine, but after a while another one pops up. The error code is 18493. Does anyone have an idea what could be going wrong???
    Thanks for your help already now!

    Hello Wolfgang,
    I get the same error, but I cannot figure it out too. I hope you or I get some responses back! I do not know why there isnt an edit feature in outlook to acknowledge the individual alarm so it does not alarm again!
    Fil

Maybe you are looking for