Exchange has been enabled for over a year and I ST...

Hey Everybody,
I've been reading several threads and came across this one;
http://community.bt.com/t5/BT-Infinity/FTTC-Exchange-and-Cabinet-BT-Wholesale/td-p/181321
Unfortunately it appears that they've pulled this from public view so I can't access.
Using the "Find Sold House Prices" tool on Rightmove to obtain House Numbers to Postcodes, i've been able to determine on the BT Infinity checker that some houses in my town can get Infinity.
My exchange is MRMDW (Middlewich) http://www.samknows.com/broadband/exchange/MRMDW
FTTC status: Available in some areas
I logged a call through the normal BT website before somebody contacted me and started talking about Cabinets, I had no idea what a cabinet was and thought he was just trying to fob me off with technical gumf.
Since i've been reading, I want to try and determine where my Cabinet it, and when its likely to be "Fibre Enabled"
Can somebody send me a copy of the list
I found the following on the old bt-wholesale website over 12mths ago;
RFS
1
MIDDLEWICH
MRMDW
RFS
3
MIDDLEWICH
MRMDW
RFS
4
MIDDLEWICH
MRMDW
RFS
6
MIDDLEWICH
MRMDW
RFS
8
MIDDLEWICH
MRMDW
RFS
9
MIDDLEWICH
MRMDW
RFS
10
MIDDLEWICH
MRMDW
RFS
12
MIDDLEWICH
MRMDW
RFS
13
MIDDLEWICH
MRMDW
RFS
14
MIDDLEWICH
MRMDW
Name
Postcode
SAU_NODE_ID
Exchange Only Flag
Percent Lines
Uplift
Phase
Deployed
FTTC or FTTP
MIDDLEWICH
CW109GB
{MRMDW}{p15}
0
26.92
2.38
MIDDLEWICH
CW109GB
{MRMDW}{p7}
0
73.07
2.18
I have no idea how to read this
It looks like I have 2 cabinets for my postcode.
All I want it Infinity...... can sombody advise when I am likely to get it or how I can quicken the process up ?
Thanks,
Scott

There is no way you can speed up the process as it is Openreach that are responsible for the roll out of fibre
BT retail like any other ISP only has the details of theactive cabinets
The cabinets are the green boxes you see on many streets and you may often see Openreach engineers working on the fibre cabinet is placed close by the existing cabinet
Unfortunatly not every cabinet is upgraded for fibre first time around and additional phases of new cabinets are constantly being added to the existing cabinets
All you can do is wait until you see a new cabinet being installed in your area and keep using the infinity checker on the BT.com web site
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

My phone just turned off and will not go back on. my top lock button has been broken for over a year. Help!

my phone just turned off and will not go back on. my top lock button has been broken for over a year. Help! I have tried plugging it into wall unit and computer but my home button just doesnt do anything!

It seems that year long delay from having your lock button repaired has finally caught up to you. Sounds like you have some damage to your phone that requires repair/replacement. Take it to a Apple store or contact Apple Tech Support.

ERGH my iphone 5 has been charging for over 4 hours and will not turn itself on, what do i do?! reply asap please

ERGH my iphone 5 has been charging for over 4 hours and will not turn itself on, what do i do?! reply asap please

Try resetting it while it is connected to power: Hold down the home and sleep button, wait for the Apple logo, let go of the buttons. It is connected to a wall charger?

This bug has been around for over a year: SecurityError: Error #2123: Security sandbox violation

Hi,
The bug of 'SecurityError: Error #2123: Security sandbox violation: BitmapData.draw: file:///xxx/xxx.swf cannot access rtmfp://fms4.acrobat.com/cocomo/na2-sdk-xxx/xxx. No policy files granted access.' was first reported in lccs forum over a year ago:
http://forums.adobe.com/message/2803074
But the bug is still around. The bug can be generated by calling BitmapData.draw() on a flash.media.Video object which is attached to a p2p stream. It looks like the solution is to have the publisher to call:
send("|RtmpSampleAccess", true, true)
on the NetStream object _before_ the subscriber calls NetStream.play(), in order to give the permission to subscribers for audio and video streams.
In lccs library, the above permission authorisation happens in WebcamPublisher:
protected function onNetStatus(p_evt:NetStatusEvent):void
if (p_evt.info.code=="NetStream.Connect.Success") {
setTimeout(sendSnapShotPermission, 500);
_stream.send("|RtmpSampleAccess", true, true);
protected function sendSnapShotPermission():void
_stream.send("|RtmpSampleAccess", true, true);
but it doesn't help the problem. In fact, it is not clear to me when this 'snap shot permission' is sent to the subscriber.
One more note: This is not a critisism for the lccs development quality, but rather a question on how ready lccs is for production use. After encountering this bug, I had to go through the lccs code (the open source parts), and found out that the library is not really written, well, carefully, and it is full of temporary quick-n-dirty fixes.
For instance in the above example, sendSnapShotPermission() is called after 500 milliseconds, probably to allow something to happen before calling the method, but how can you be sure that it will happen in 500 milliseconds? Probably,an event listener should have been used. Immediately in the next line, we see:
_stream.send("|RtmpSampleAccess", true, true);
which is a duplicate of sendSnapShotPermission(). many examples like this can be found throughout the library.
Aureliano

Hi Nigel,
Two questions:
1. When the publisher sends the access permission to the subcriber by:
netStream.send("|RtmpSampleAccess", true, true)
, on the subscriber side, what event or function can handle the guaranteed receipt of the access permission? Currently it is possible to draw the incoming stream video upon receiving NetStream.Play.Star and waiting for 5 seconds or so:
public class MyWebcamSubscriber extends WebcamSubscriber {
override protected function layoutCameraStreams():void
// trying the event listener seems to work here.
_streamManager.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
override protected function onNetStatus(e:NetStatusEvent):void
super.onNetStatus(e);
case "NetStream.Play.Start":
setTimeout(function():void {
// draw the video from the incoming stream here.
}, 5000);
The questions is, which event can let the subscriber know that it has the access permission to the video stream?
2. In WebcamPublisher, why is that the access permission is sent 3 times?
a. Once on receiving NetStream.Connect.Success with 0.5 second delay, as in below.
b. Once immediately upon receiving NetStream.Connect.Success, as in below.
protected function onNetStatus(p_evt:NetStatusEvent):void
if (p_evt.info.code=="NetStream.Connect.Success") {
setTimeout(sendSnapShotPermission, 500);
_stream.send("|RtmpSampleAccess", true, true);
protected function sendSnapShotPermission():void
_stream.send("|RtmpSampleAccess", true, true);
c. Once in onConnectionTypeChange() with 2 seconds delay:
protected function onConnectionTypeChange(p_evt:StreamEvent):void
if ( _streamManager.isP2P) {
_stream= new NetStream(_connectSession.sessionInternals.session_internal::connection as NetConnection,NetStream.DIRECT_CONNECTIONS);
setTimeout(sendSnapShotPermission, 2000);

My ipod has been connected for over an hour, and it still says 'determining tracks to sync'. What should I do?

I have an iPod classic 30GB. I've just got a new laptop and i have transferred my itunes library from my old laptop to my new one. I've also updated my library substantially, and want to erase everything from my ipod and sync the new library onto it. However, it's been connected for an hour and is still saying 'determining tracks to sync'. Is this normal? How long should it take, if my new library is about 10.5GB large?

When you switched chargers, did you use the 10 watt chargers designed for the iPad? Did you also change the connecting wires? Have you tried power off, hold the sleep/power button until the red slider appears and slide to off. Then plug the iPad in?
If none of that is working, it could be a bad 30-pin connector in the iPad...an Apple genius bar tech can test and see if that is the problem.

I can't power up my pavilion dv6-3210. It has been working for over a year.

I can't get any power signal. No lights when plugged in. I tried to remove the battery and still no luck. Just dead. It was working last night fine but a few days ago had the same problem and removing the battery then powering up worked. Now nothing.
It is out of warranty so I need to know if HP does repair.Couldn't find anything on their site.

It's back working. I'm thinking that maybe because it was plugged in while sitting on the carpet it might have engaged the heat sensor. Anyway I tried it again after a few hours without plugging it in and it fired up.

My phone has been activated for over a week, and now it just reset itself and won't activate. What do I do?

I had this iPhone activated at my AT&T store last week. I have had no problems with it, until tonight. I was using it and then the loading screen with the apple came up and it said activation required. When I try to activate it on the phone it says the servers aren't available, and to use itunes. When I go to iTunes and plug it in, it says the software on my phone has expired and I need to upgrade. It was running iOs 7. When I go in to iTunes, no updated iOs is available and I can not activate it, it shows up with all my apps and music. What do I do?

So I had to manually update form a download on the iOS dev portal.
https://developer.apple.com/devcenter/ios/index.action
I used A1429 but apples info link didn't help for me deciding, luckily the wrong download just wouldn't install.

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

I am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

i am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

Possibly the drive is full
Possibly the permissions are not set to WRITE permission
Possibly there has been a "user mistake" and you think you are copying to a drive you have been using for over a year but something has accidentally changed and you're copying to a different location

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

My apple id has been disabled for my macbook pro and ipad - how do I enable it?

my apple id has been disabled for my macbook pro and ipad - how do I enable it?

contact itunes
https://expresslane.apple.com/GetproductgroupList.do?PRKEYS=PF4

Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help!

How can I stop the 'Adobe Reader Update' from constantly trying to download? It's been over a week now, preventing me from signing out of my computer and other issues too. Can you help please? thanks!

Hi! The version is OS X 10 8 5...not sure what that means lol but it makes a difference obviously!
I did what you said now and it has worked, thanks so very much for getting back to me. I really appreciate your help!!
Can I ask you questions in the future or do I just do that through the forum?\
Thanks again, Jennie
From: Anubha Goel <[email protected]>
To: rubyrose1950 <[email protected]>
Sent: Sunday, April 26, 2015 10:42 PM
Subject: You have been mentioned by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community
|
You have been mentioned
by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community - View Anubha Goel's reference to you Hey rubyrose1950, Could you please let me know what version of OS are you working on.You might try uninstalling Reader and install it again from the below mentioned link:Adobe Acrobat Reader DC Install for all versions Let me know how it goes. Regards,Anubha
Participate in the conversation by replying to this email
To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

Been stuck for over a year, please help me do this

so i have this laptop with 8gb ram and core i7 as well as 2 hdd (no raid).
Now i heard about premiere (cs4) and my laptop is ready to take most of the advantage but the hard drive is the bootleneck.
Basically, all i want is to do few cuts in a video that was filmed by sony hdr-sr11 camcoder in hd 1080 60i settings. Now i heard i need 3 hard drives etc, but at the moment, i only have 2.
So is there anyway i can do simple cuts in premiere without losing any quality and slowdown in fps or is there any other software that can be better? I really don't want to lose any quality or fps with the g73jh-a2 asus laptop i have?
i also have ati 5870 video card

The lowest was 19mb, but was floating arond 30mb. Still that aint good..
I can't afford the partition magic and i heard its not good to partition after installing windows. I am thinking of fresh install, but if there is a workaround, it would save me tons of time as not installing apps etc.
For the setup
1)Can i have the programs in secondary drive? What about just a game or 2?
2)By projects, do you mean the videos that im going to edit?
3)what is scratch?
4) By media, do you mean videos im going to edit?
Lastly, what about a bit of data? Like <50gb.. Pictures documents etc
Like, truly anonymous
Date: Fri, 30 Apr 2010 17:16:10 -0600
From: [email protected]
To: [email protected]
Subject: been stuck for over a year, please help me do this
i did hdtune and was the os drive was 100mb-19mb in the end and the
secondary one was 105-45~mbps
Those figures are disturbing. For any reasonably modern 7200 RPM disk these figures should be around 120 - 60 MB/s. If it goes down to below 20, something is seriously wrong. Now that may be caused by your partitioning or something else, hard to discern from here, but these results are worrisome.
Maybe Partition Magic can help you get rid of all these partitions, otherwise a complete reformat and fresh install of OS & programs is all that is left.
Setup should be something like this:
C: OS & programs & projects
D: Pagefile, scratch and media
It depends a bit on the nature of your projects, your workflow, but in general you set up your disks in such a way that disk accesses are spread over the available disks as much as possible.
>

Exchange has been enabled for over a year and I ST...

Similar Messages

Maybe you are looking for