Exchange- IMAP command "APPEND" (to inbox) failed with server error

Not sure, but think I was adding a mailbox to the Exchange Server's inbox, and now I am hammered with repetitive alerts;
"Some actions taken while the account “Exchange” was offline could not be completed online.
Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “INBOX” in “On My Mac” so that you can complete the actions while online.
Additional information: The IMAP command “APPEND” (to INBOX) failed with server error: An unexpected network error occurred.."
Any ideas on how to stop the messages/undo/cancel, or anything to have Mail.App work again?
thanks.

This can happen anytime you give an IMAP command offline that the server is not able to fulfill once you go back online. Mail's less-than-helpful response is to keep retrying the command, without regard for the feedback from the server. And there's no way for you to revoke the command.
In my case, Mail kept recreating a draft email that I had deleted. I believe it had an attachment that was too large for the server to accept. So Mail kept creating copies of this draft, pushing my account over the usage limit. I closed Mail, accessed my account through a different app, deleted all those copies, and emptied the trash. When I returned to Mail, it went right back into its loop, creating more draft copies until my account was again over the limit.
This problem was discussed, but never resolved, as long ago as October 2007. Here's an archived thread: http://discussions.apple.com/thread.jspa?threadID=1198026
I tried this simple fix, which worked for others, but had to undo it in my case: http://snipr.com/pmlte
I'm now trying another approach. If it works, I'll describe it. Mail has been launching for 14 minutes now.

Similar Messages

Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command "DELETE" failed with server error: DELETE failed - Mailbox is reserved "

Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command “DELETE” failed with server error: DELETE failed - Mailbox is reserved " is there any way to delete of stop messages from coming into it ??
thanks

Sounds like the mail server thinks you are asking to delete the bulk-mail mailbox instead of some/all of the messages within it.
How are you trying to delete your bulk mail messages? That is, what are you doing, step by step, up to the error message.
What you should probably be doing is selecting the bulk mail mailbox, selecting one of more messages inside it, then hitting the "delete" key.

Request 0 of type 38 failed with server error - but it worked anyway

I'm trying to modify the rights that a certain group has on a certain folder. When I modify the rights (in Assign Security in the CMC) and click OK, I get the error:
An error occurred at the server during security batch commit: Request 0 of type 38 failed with server error : You do not have sufficient rights to make the requested security changes
However, when I click cancel and View Security, I can see that the change actually worked. Why do I get this error? Is there some right that I need to be assigned in order to stop getting the error?
I'm logging in with a test ID that has the following rights on the folder:
     Add objects to the folder
     Copy objects to another folder
     Delete instances
     Delete objects
     Edit objects
     Reschedule instances
     Schedule document to run
     Schedule to destinations
     Securely modify right inheritance settings
     Securely modify rights users have to objects
     View document instances
     View objects
The test ID has the following rights on the group:
     Add objects to the folder
     Delete objects that the user owns
     Edit objects that the user owns
     View objects
We're using XI 3.1; I've gotten the error when testing this in both FP 1.6 and FP 2.3. Thanks for any help you can provide.

I just realized that I need to correct what I said. The rights that the ID has to the group are as follows (more rights than I mentioned originally):
Add objects to the folder
Delete objects
Delete objects that the user owns
Edit objects
Edit objects that the user owns
Securely modify rights users have to objects
View objects

Connector install fails with Server Error on Windows 8.1 Pro

I have tried everything and cannot get the connector software to install on my computer.
Server=Dell PowerEdge R210II, Windows 2012 Essentials
Computer = Dell Inspiron 17R, Windows 8.1 Professional
LAN = 192.168.0.0/24, Server is 192.168.0.2, not using IPv6 but it's enabled on server and clients. Computers get IP and config from DHCP, DNS only points to server. servername.domain.local resolves fine. I can also join the computer to AD the old way
(without connector). I have other Windows 8 comptuers on the domain that have the connector installed.
ClientDeploy.log:
[6720] 140301.134541.5354: ClientSetup: Start of ClientDeploy
[6720] 140301.134541.6292: General: Initializing...C:\WINDOWS\Temp\Client Deployment Files\ClientDeploy.exe
[6720] 140301.134541.6448: ClientSetup: Loading Wizard Data
[6720] 140301.134541.6761: ClientSetup: Current DeploymentStatus=Running
[6720] 140301.134541.9573: ClientSetup: Showing the Client Deployment Wizard
[6720] 140301.134542.0823: ClientSetup: Adding Server Info data in the Product Registry
[6720] 140301.134542.0979: ClientSetup: Set the Deployment Sync Event
[7748] 140301.134552.6138: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[7748] 140301.134552.6293: ClientSetup: Entering ConnectorWizardForm.RunTasks
[7748] 140301.134552.6293: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[7748] 140301.134552.6293: ClientSetup: Entering InstallRootCertTask.Run
[7748] 140301.134552.6293: ClientSetup: Install root cert to local trusted store
[7748] 140301.134552.6450: ClientSetup: Exiting InstallRootCertTask.Run
[7748] 140301.134552.6450: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[7748] 140301.134552.6450: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[7748] 140301.134552.6450: ClientSetup: Exting ConnectorWizardForm.RunTasks
[7748] 140301.134552.6450: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[7748] 140301.134552.6450: ClientSetup: Entering ConnectorWizardForm.RunTasks
[7748] 140301.134552.6450: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[7748] 140301.134552.6450: ClientSetup: Entering SetupVpnAndDATask.Run
[7748] 140301.134552.6606: ClientSetup: Deploy VPN profile
[7748] 140301.134552.7075: ClientSetup: Exting SetupVpnAndDATask.Run
[7748] 140301.134552.7075: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[7748] 140301.134552.7075: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[7748] 140301.134552.7075: ClientSetup: Exting ConnectorWizardForm.RunTasks
[7748] 140301.134552.7075: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[7748] 140301.134552.7075: ClientSetup: Entering ConnectorWizardForm.RunTasks
[7748] 140301.134552.7075: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[7748] 140301.134552.7075: ClientSetup: Entering ValidateUserTask.Run
[7748] 140301.134552.7075: ClientSetup: Validating User
[7748] 140301.134552.7075: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[7748] 140301.134552.8169: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more
information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on
tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.WindowsServerSolutions.Devices.Identity.ICertService.GetMachineStatus(MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum, String userName, String password, String machineName)
   at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   --- End of inner exception stack trace ---
   at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[7748] 140301.134552.8169: ClientSetup: Exiting ValidateUserTask.Run
[7748] 140301.134552.8169: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[7748] 140301.134552.8169: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[7748] 140301.134552.8169: ClientSetup: Exting ConnectorWizardForm.RunTasks
[6720] 140301.134552.8325: ClientSetup: JoinNetwork Tasks returned TaskStatus=Failed
[6720] 140301.134554.7857: ClientSetup: Back from the Client Deployment Wizard
[6720] 140301.134554.8012: ClientSetup: Saving Wizard Data
[6720] 140301.134554.8012: ClientSetup: End of ClientDeploy: ErrorCode=1603
Where do I go from here? I would really appreciate some help. Thank you, Michael
Michael Maxwell

I found the issue. The web.config file became damaged on the server. C:\Program Files\Windows Server\Bin\WebApps\CertWebService\Web.config is the file. Performed a search and replace, replace all instances of "%SBSPRODUCTBINPLACEHOLDER% with C:\Program Files\Windows
Server\Bin, restart IIS and run the Connector software install again. Here is a KB on the issue:
http://support.microsoft.com/kb/2828269
Michael
Michael Maxwell

IMAP command "APPEND"...?

My INBOXSent Messages keeps filling up and I get this error which locks my mail.
Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox "INBOXSent Messages" in "On My Mac" so that you can complete the actions while online.
Additional information: The IMAP command "APPEND" (to INBOXSent Messages) failed with server error: Invalid mailbox name..
How can I get my mail working again as this is locking up my mail server every time?

This can happen anytime you give an IMAP command offline that the server is not able to fulfill once you go back online. Mail's less-than-helpful response is to keep retrying the command, without regard for the feedback from the server. And there's no way for you to revoke the command.
In my case, Mail kept recreating a draft email that I had deleted. I believe it had an attachment that was too large for the server to accept. So Mail kept creating copies of this draft, pushing my account over the usage limit. I closed Mail, accessed my account through a different app, deleted all those copies, and emptied the trash. When I returned to Mail, it went right back into its loop, creating more draft copies until my account was again over the limit.
This problem was discussed, but never resolved, as long ago as October 2007. Here's an archived thread: http://discussions.apple.com/thread.jspa?threadID=1198026
I tried this simple fix, which worked for others, but had to undo it in my case: http://snipr.com/pmlte
I'm now trying another approach. If it works, I'll describe it. Mail has been launching for 14 minutes now.

When I try to move messages to trash I get this The IMAP command "CHECK" failed for the mailbox "INBOX" with server error: Error in IMAP command received by server.. what do I do ?

I try to move emails into the trash and this message comes up;
The IMAP command “CHECK” failed for the mailbox “INBOX” with server error: Error in IMAP command received by server..
what should I do ?
My trash is empty and I re booted etc...

Back up all data. Rebuild the mailbox. Try again to delete the message.

When deleting emails i get the following error message at times ...The IMAP command "UID COPY" (to Deleted) failed for the mailbox "INBOX" with server error: Error 9. Server error. Please try again later..

When deleting emails i get the following error message at times ...The IMAP command “UID COPY” (to Deleted) failed for the mailbox “INBOX” with server error: Error 9. Server error. Please try again later..

Please complete or update your system profile so the users here can properly help you.
Which email client are you using?

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

What program are you using? And what version?

TS3276 The IMAP command "UID COPY" (to Deleted Messages) failed for the mailbox "Bulk Mail" with server error: UID COPY Mailbox in use. Please try again later.

I have been getting the following message and have no idea how to clear it. Any help will be greatly appreciated!!! I have force closed Mail, and have tried to re-sync my accounts but no luck.
The IMAP command “UID COPY” (to Deleted Messages) failed for the mailbox “Bulk Mail” with server error: UID COPY Mailbox in use. Please try again later.

What program are you using? And what version?

Error Message in xcode: Command /usr/bin/codesign failed with exit code 1

I am attempting build my iPad application on my device and I have went though the provisioning and successfully created an App ID, provisioning, etc. and when i 'Build and go' i get this error message:
*Command /usr/bin/codesign failed with exit code 1*
The only thing that I could think of that might be causing this is that when I 'Build and Go' on my device it come up with this pop-up message from xcode twice:
+codesign wants to sign using key "MY NAME" in your keychain.+
+Do you want to allow access to this item?+
Please Help.

Hey jamez97,
In Xcode, top left hand corner of the window. Access the drop down menu, make sure that you have;
1) Set to run on the DEVICE
2) Selected DEBUG
3) Connected your device
click build and run...adjusting these sometimes works when i have the same error as you.
You should have also added your device the provisioning profile you made. If you haven't done this, you can do it via the iOS Devcentre --> provisioning portal -->launch assistant.
Hope this helps...if it doesn't, post back and somebody else may be able to give you the solution.
j
Message was edited by: james_coleman01
Message was edited by: james_coleman01

Error Command /usr/bin/codesign failed with exit code 1

Hello everyone, I take this opportunity to greet and thank all in advance.
I develop Android in for a long time and I just started trying with xcode. But I have this compilation error:
Command /usr/bin/codesign failed with exit code 1
I found it on google but nothing that I have solved the problem.
Here is the error log:
CodeSign /Users/paolotuttoilmondo/Library/Developer/Xcode/DerivedData/veneziawebcam-dbkg muothgsyigeuuxsxjflreufo/Build/Products/Distribution-iphoneos/veneziawebcam.app
cd /Users/paolotuttoilmondo/Documents/Applications/veneziawebcam
setenv CODESIGN_ALLOCATE /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/codesign_allocate
setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/u sr/bin:/bin:/usr/sbin:/sbin"
/usr/bin/codesign --force --sign "iPhone Distribution: Paolo Tuttoilmondo" --resource-rules=/Users/paolotuttoilmondo/Library/Developer/Xcode/DerivedData/v eneziawebcam-dbkgmuothgsyigeuuxsxjflreufo/Build/Products/Distribution-iphoneos/v eneziawebcam.app/ResourceRules.plist --entitlements /Users/paolotuttoilmondo/Library/Developer/Xcode/DerivedData/veneziawebcam-dbkg muothgsyigeuuxsxjflreufo/Build/Intermediates/veneziawebcam.build/Distribution-ip honeos/veneziawebcam.build/veneziawebcam.xcent /Users/paolotuttoilmondo/Library/Developer/Xcode/DerivedData/veneziawebcam-dbkg muothgsyigeuuxsxjflreufo/Build/Products/Distribution-iphoneos/veneziawebcam.app
/Users/paolotuttoilmondo/Library/Developer/Xcode/DerivedData/veneziawebcam-dbkgm uothgsyigeuuxsxjflreufo/Build/Products/Distribution-iphoneos/veneziawebcam.app: CSSMERR_TP_NOT_TRUSTED
Command /usr/bin/codesign failed with exit code 1
My certificated Key:
I think the problem is in the certificates
I use Xcode 4.2.3
Thanks in advance.
Paolo

Hello everyone, I solved the problem by me, I missed the certificate WWDR.
Thanks

Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?

I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas?

Disco command line import fails with parser error 7

Hi, we have discoverer version 10.1.2.48.18 installed to multiple environments.
Developers have created eex-file and we try to import it to all the test environments, it goes through fine with some but with some it fails with parser error 7 :
Here is the full error log:
11/13/2008 7:30:22 AM
D:\disco1012\BIToolsHome_1\bin\DIS51ADM.EXE /connect /import oudata_disco.eex /identifier /refresh /preserve_workbook_owner /show_progress /log import.log
oudata_disco.eex:Could not locate the Folder with identifier 'INSTRUCTOR_ASSIGNMENTS1' in the target End User Layer
oudata_disco.eex:An imported Folder had display name 'Dc transactional sales q2' renamed to 'Dc transactional sales q2 1'
oudata_disco.eex:An imported Item Class had display name 'Eval_Delivery_Region' renamed to 'Eval_Delivery_Region 1'
oudata_disco.eex:An imported Item Class had display name 'Quarter' renamed to 'Quarter 1'
oudata_disco.eex:An imported Item Class had display name 'Track List with ALL' renamed to 'Track List with ALL 1'
The Item Hierarchy with identifier 'INSTRUCTOR_ASSIGNMENTS_LAST_REFRESH_DATE_DEFAULT_DATE_HIERARCHY' has not been imported because: There are no items in this hierarchy node
Import completed, but with warnings. Please check the result.
File(s) imported partially :
oudata_disco.eex
11/13/2008 7:36:38 AM
11/13/2008 7:37:29 AM
D:\disco1012\BIToolsHome_1\bin\DIS51ADM.EXE /connect /import oudata_disco_workbooks_84.eex /identifier /refresh /preserve_workbook_owner /show_progress /log import.log
oudata_disco_workbooks_84.eex:A parsing failure has occurred in file 'oudata_disco_workbooks_84.eex'.
Parser error: '7'
The import has failed (your End User Layer has not been modified) - oudata_disco_workbooks_84.eex:A parsing failure has occurred in file 'oudata_disco_workbooks_84.eex'.
Parser error: '7'
If anyone knows what can be teh cause of this please let me know.
thanks,
Nina

Hi,
The most likely cause is that the export file has become corrupted. Are there very big export files?
Another possibility is that Discoverer Administrator has run out of memory while parsing the file.
Rod West

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

IMP-00017: following statement failed with ORACLE error 901:

Why I get these error messages while I do full import? Could anyone help me on this issue?
IMP-00017: following statement failed with ORACLE error 901:
"CREATE FORMAT92TRIG "
IMP-00003: ORACLE error 901 encountered
ORA-00901: invalid CREATE command
IMP-00008: unrecognized statement in the export file:
ýÿ$
Note:- I have used the same command to import the same export file to a different SID and it went fine but when I try to do import for SID (DEMO), I get the above mentioned errors.
Thanks
Rajesh Kumar

Thanks for the clue
Got it right, when i changed the primary Oracle Home from 10gDS to 9iDB. 10gDS has a lower version of import as compared to 9iDB.
Rajesh

Exchange- IMAP command "APPEND" (to inbox) failed with server error

Similar Messages

Maybe you are looking for