Exchange Infrastructure Central Monitoring

Dear Experts,
I would like to know whether there is anyway to have central monitoring tools that can be setup in XI(i am not prefer to have CCMS monitoring),it should be more advance than the CCMS monitoring. I know there is a tool called "BMC Patrol" that can be used for monitoring purpose. But is that can be done in XI too? We want to monitor all the information that can be monitor such as the connection between R/3 system, message monitoring and so on(from Java to ABAP). If yes please send me the information and guides to setup such Monitoring tools
Thank You
Regards
Ramesh
Edited by: Ramesh Kupusamy on Aug 20, 2008 11:42 AM
Edited by: Ramesh Kupusamy on Aug 20, 2008 11:43 AM

Hi,
Refer
SAP Network Blog: How-to enrich XI monitor's output
How-to enrich XI monitor's output
Real time XI Monitoring
Thanks
Swarup

Similar Messages

No Central Monitoring server in exchange profile

Hi Experts,
I tried to configure alerts in RWB.
it shows No Central Monitoring server in exchange profile
The properties in exchange profile are as follows
hhtp port 8000
ashost FQDN has been specified..
ne idea on how to proceed with this?

Hi Ravi,
There arer some configurations needed to be done for central monitoring.Like activating reuired additional ICF services .Have you done all configurations perfect??
I think you missed activating ICF services for ALERTS..refer below link and read it..:)
http://help.sap.com/saphelp_nwpi71/helpdata/en/76/661b410210ef6fe10000000a1550b0/content.htm
Regards,
Raj

SAP Exchange Infrastructure

Can any one tell me about SAP Exchange Infrastructure, what is it, where it is reqd., what r the requirements to install it, or any source of material to read
abhishek

Hi Abhishek,
As u got .....the basic information. check these links for further info.
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
Also for more info related to XI go through these links:
XI -Starter
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
To understand the architecture of XI, Please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
1) How-to Guides for SAP NetWeaver 2004 for SAP XI:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
Regards,
Priyanka.

Custom Central Monitor PI

Hi,
i need to create a custom central monitoring where i can trace message of XI 3.0 and centralize the Exchange of Idocs in one simple and common tool.
is possible get access to APIs and get information about processing message, Adapters, tRFC,qRFC. My idea is simulate an Business Process Monitoring with a WDP development.
Thanks
RP

Hi,
Below monitoring features are already available in PI 7.1 EHP 1 RWB
1. Message monitoring where we can keep track of Scheduled/Successful/Error/Cancelled messages.
2. User defined messages search.
3. Web service logging and tracing.
4. Message Edit
Regarding webdynpro u can refer few of the blog:-
Consuming XI Web Services using Web Dynpro u2013 Part I
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
Exposing webservice through R3.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2
Exposing BAPI as Web Services through SAP XI
/people/community.user/blog/2006/10/24/exposing-bapi-as-web-services-through-sap-xi
refer this link to know how to create and expose BAPI as a web service:
/people/sridhar.k2/blog/2006/09/12/creating-and-exposing-bapi-as-web-service-and-using-it-in-web-dynpro
Using RFC as WebService in WebDynpro
/people/kumar.prashant4/blog/2006/07/14/using-rfc-as-webservice-in-webdynpro
PI Monitoring Functionality - Fetching Data from SXMB_MONI Standard Tables - Part I
http://wiki.sdn.sap.com/wiki/display/Snippets/PIMonitoringFunctionality-FetchingDatafromSXMB_MONIStandardTables-PartI
chirag

PI7.0: SLD - Technical System of type "Exchange Infrastructure"

Hi Guys,
The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps
1. Switch to "Home" in the "Technical Landscape" view, and select the
"Exchange Infrastructure" technical system type there. Select all
domains and XI components for the host and delete these by selecting
them and pressing 'Remove'.
2. Restart the J2EE server. After you restart the server, the XI
components log on to the SLD again and create a new entity of class
"XI Integration Server".
3. To register the directory and repository again, you must also log on
to the two tools.
I have restarted the j2ee server and looged into the IR and ID but they are not automatically registered in the central sld.
central sld is on solmanger box. How to register IR, ID, RWB and central adapter engine under the technical systems of type exchange infrastructure ?
any help would be really appreciated
Thanks,
Raj

Hi Reddy,
i faced the same problem few days back...
check this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
and also cross-check the post installation steps.
In my case the Business system for XI was created of type web as java... but it should be of type web as abap.
Sachin

Central Monitoring

I am trying to configure Central Monitoring for our environment and having problems getting the auto reactions to work on the satalite systems. I've installed the CCMS agent on the satalite but when the events occur that should trigger the auto reaction nothing is happening. The auto reactions occur fine on the central system.
My questions are, is the CCMS agent required on the central server as well as the satalite systems for the Central auto reaction to occur?
On my central monitoring server, shouldn't I be able to see all the satalite nodes in the list in RZ20? If so, how do I add them?   The only place I see the monitoring occurring centrally is in transaction DSWP under system monitoring. Why don't these systems show up in RZ20?
My auto Reactions are created on the Central Monitoring Server only. According to the documentation. When I look on the satalites they are not on those servers. Should they be?
Is there any clear documentation on setting this up?
Thanks,
Lee

Thanks for the response. I have configured my MTE's in RZ20 and I can see all the systems the environment.   I installed the CCMS agent on one of my nodes to test with. Im trying to figure out how to associate the alerts that I see in RZ20 with the autoreactions in RZ21?   I want to send alerts out for batch jobs from solution manager.
What I did was, went into RZ21,
Technical infrastructure - configure central system - assign central auto reactions
selected my system for system ID
selected R3BPServerSpecAbortedJobs for MTE Class
selected Z_CCMS_OnAlert_Emial-V2_Batch
I created the Z_CCMS_OnAlert_Emial_V2_Batch from CCMS_OnAlert_Emial_V2 and adjusted the paramters to use a distribution list which I created in client 000 and put my emial address in.   Im using Recipient -typeid C
But when jobs fail, that I think should trigger an alert, Im not seeing anything go into SCOT.
FYI.. emialing from SO01 is working fine so there is no problem with the emial just with the auto-reaction.
Any thoughts on how to test this?
Thanks
Lee

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Central Monitoring of Multiple XI Instances

Is it possible to have central monitoring (message and end-to-end) for multiple XI instances in a landscape?
We have a landscape with one Central XI instance and multiple local XI instances.
Is it possible for me to ...
1. Add the local XI integration servers to the component monitoring?
2. Monitor the messages flowing through the local XI instances in the central XI RWB (even for messages that do not flow through the central XI)?
3. Have end-to-end monitoring even for messagesthat do not flow through the central XI?

Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there.

Exchange Infrastructure Node has no elements in CCMS Templates

Hi,
I am configuring CCMS.When I choose Exchange Infrastructure node in SAP CCMS Monitoring Templates I dont get the tree. In blogs and articles I am able to see the tree.So far I have just created a System and System groups in rz21. I am stuck.
Thanks in advance.
Regards,
Sudharshan

Hi,
Problem solved. The reason is that while maintaining system groups I gave a name different than ExchangeInfrastructure_Systems.
Regards,
Sudharshan

Diff b/w netweaver platform and exchange infrastructure.

Dear SDNers,
I am new to net weaver.first of all what is the diff b/w netweaver platform and exchange infrastructure.
i want to learn more about net weaver.if anybody give me the links, i would be grateful to them.
reward sure...
Senthil kumar

Hi
N/W is a set of new dimensional products that SAP uses for Integration of different Business entities like the "People" , "Information" and "Process"
XI is part of the Process Integration layer.
Regards
krishna

Java Stack for Central monitoring system

I believe for central monitoring with only ABAP stack is sufficient to monitor both remote ABAP and JAVA stacks. For this purpose CCMS and GRMG can be used. My questing is there any need to have JAVA stack in central monitoring system? If yes, what are the things that only ABAP stack can not do alone and JAVA stack is required in central monitoring system?

Hi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny

Can PI 7.1 and Central Monitoring on Solution Manager 7.0 coexist

Hi,
I would like to know if there are any restrictions if any for using PI 7.1 instead of PI 7.0 with Solution Manager 7.0, NWA 7.0 and CCMS 7.0. I would like to know the problems if any we may face for central monitoring PI 7.1 from Solution manager 7.0.
Thanks in advance.

Hi,
In SAP xi it depends on sp (service pack ) only.
Refer this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9070bf2e-9196-2a10-c183-eca16b22256f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f08287c4-a4ee-2a10-b0a2-c863755fdb94
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60ec1de2-76c6-2a10-7198-fa4e9dd07e11
Hope it help this
Regards,
Surya

What is a container variable in BPM (Exchange Infrastructure)?

In BPM scenario with Exchange Infrastructure, I have come across container variable. What is this container variable? How it is used in BPM?
In another instance I read that to trigger a alert in BPM I have to create a container variable. So I have another question, What steps I have to follow to create a container variable and trigger alert?

Hi,
To create alerts in XI , check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
ALso, if you are on SP14 and above, check this note 913858.
The container variables that are accepted while createing Alerts in XI are available on this link,
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards,
Bhavesh

Xi3.0 Monitoring using a Central Monitoring system

Hi Guys
Has any of you managed to integrate XI3.0 SLD into Solution Manager 3.10 SLD or is it just not possible?
Have you figured out how to setup XI3.0 and Alert management to integrate that into a Central Monitoring system?
/tobbe

Hi Guys
I guess the obvious solution to my very own question would be to...
1. Install a 640 J2EE instance as a MASTER SLD
2. Configure both XI and Solution Manager to call "MASTER SLD" for info.
I will produce a document and publish it here as soon as I am done with the installations and configurations
Thanks for a great TechED
/Tobbe

Solution Manager - Central Monitoring

Hi,
I keep on hearing the buzz word that Solution Manager would be used as central monitoring from PI 7.1 or later.
Can anyone explain more about this?
I was assuming that solution manager is just to store all the documents and processes.
Regards
Krish

Krish,
pl refer below links-
Pi Alert Framework centrally Monitored from SAP Solution Manager
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05c14c3-34af-2b10-a1b1-fa2a39e0d2ae?QuickLink=index&overridelayout=true

Exchange Infrastructure Central Monitoring

Similar Messages

Maybe you are looking for